EKBE and EKBEH query

I am trying to create a query that summarizes the receipts of our purchase orders (PO) and scheduling agreements (SA) by date.
The issue -- the system has archived some of the SA into the EKBEH table so all I see in the EKBE is one line posted on the archive date. This does not allow me to correctly analyze the monthly receipts. I cannot determine a way to take the line from the EKBE table and link it to the details in the EKBEH table. Nor can I determine how the archive process runs (has not since May 2007); or reactivate the information to the EKBE table.
Current info set is EKBE - EKPO - EKKO. The grand totals are correct, just the monthly buckets are off.
Any assistance would be greatly appreciated -- points will be of course awarded.
Thanks in advance,
Kristine

Good morning & thank you for your response.
The issue that I am having with your suggestion is that in the EKBE table for these consolidated lines, there is no reference that would allow me to link to the MSEG table.
The BELNR field for the consolidated lines is blank (which makes sense because it is comprised of many entries).
Any other suggestions ??
Kristine

Similar Messages

PO history : EKBE and EKBEH

Hello guys,
What is the difference between the tables EKBE and EKBEH? In what circumstances can history be stored in EKBEH? How can I move data from EKBE to EKBEH (any transaction or other actions, not writing the own program). Thank you in advance.

Hi,
Table EKBEH contains aggregated Po history datra. Sometimes , for eample in scheduling agreement, there are huge Po history (GR and iR document) and thus it cause performance issue during posting of new invoice etc. Then for performance improvement, PO history can be aggregated using txn ME87 and thus reducing the number of entries in PO history table (EKBE).
Please see inforation in note 311089 "Performance problems because of long PO history" how this help in improving performance.
Kind Regards,
Suneet

Verifying and parsing "query" in cm:select query="..." ...

I'm writting a session EJB that's passed a param (String query) which is supposed
to be any valid "query" string passed to the cm:select tag (see "http://edocs.bea.com/wlcs/docs31/p13ndev/jsptags.htm#1057716"
for more info on this tag and the query param).
My problem is this: I don't think I should write ALL the stuff to validate and
parse this string because bea has already done it in: com.beasys.commerce.foundation.expression.*;
but the only source of documentation available on those classes is the Javadoc(which
isn't that complete). Has anyone used these classes before(Search, Expression,
Criteria, Logical)? Does anyone know of some documents on how to use them?
Please help if you can. I'd really appreciate it. Thanks.

rajan please just google or search SDN. there are large number of post for this..
to give you a head start: for using a particular index in the select query a %_HINTS ORACLE 'INDEX clause is added

Insert and update query to calculate the opening and closing balance

create table purchase(productid number(5) ,dateofpurchase date,
qty number(5));
create table inventory(invid number(5),productid number(5),
idate date,openingqty number(5),closingqty number(5));
Records in inventory:
1,1,'01-jan-2009', 10, 20
2,1,'03-jan-2009', 20, 30
3,1,'04-jan-2009', 40, 50
when I enter the purchase invoice for 15 qty on 02-jan-2009
after say '15-jan-09' , a new record should get inserted
with opening balance = (closing balance before 02-jan-2009)
and all the opening and closing balance for that product should
get affected.
If the invoice for 20 qty is entered for the existing date say
'03-jan-2009' in inventory , then the closing balance
for 03-jan-2009 should get updated and all the following records
should get affected.
I need the insert for the first one and update query for the
second one.
Vinodh

<strike>You can do this in one statement by using the merge statement</strike>
Hmm, maybe I spoke too soon.
Edited by: Boneist on 25-Sep-2009 13:56
Thinking about it, why do you want to design your system like this?
Why not simply have your purchases table hold the required information and then either work out the inventory on the fly, or have a job that calls a procedure to add a row for the previous day?
If you continue with this design, you're opening yourself up to a world of pain - what happens when the data doesn't match the purchases table? Also when is the inventory cut-off to reset the opening/closing balances? Monthly? Annually? Weekly? If it's set to one of those, what happens when the business request the inventory for a particular week?
Edited by: Boneist on 25-Sep-2009 13:59

How to put variable selection and the query result the same screen

Dear all,
how can I put the variable selection and the query result in the same screen? Please advise. Thanks.
Jin Ming

Not sure if you are saying you want the prompts on the same page as the results... however in 7.0 with BEx Analyzer, you can insert a text object from the design toolbar and assign it to the variable.... this way, lets say you run query for period 6, then the text object will display "6" on the same area where the query results are.

Verity - files and db query combo

Is it possible to have both a search of some files and a
query of a database table in the same cfcollection? If so, guidance
on how to do this?

I'm not sure if this answers your question, but it's possible
to combine database and files while indexing.

How to implement enter and execute query in ADF

I am new to ADF and I am trying to create a simple data entry screen in ADF 11g based on a database table. I am looking to implement the equivalent of the Enter Query and Execute Query feature in Oracle Forms. I tried the default operations that are available with the data controls. But they don't seem to have this feature. Can someone help me / point me to how this can be implemented.
Thanks,
Srini.

Thanks Shay. As per your suggestion I have included the Find and Execute buttons for the VO Object and ran the page. I first clicked the Find button and entered by query condition and then clicked the Execute button. At this point I get an error popup asking me to enter values for all the mandatory fields. Am I missing something?
Regards,
Srini.

Alarm and Event Query Very Slow

Group,
I am using the DSC Alarm and Event Query vi to pull data from the SQL database (not the Citadel). I have a filter set up that specifies the "Alarm Area" and the start and stop dates with maximun results set to 22. These dates are set to only pull the last 24 hrs. This vi will return around 10 to 20 entries out of perhaps 80-90 total events in the last 24 hours in the database. This database is ~2M in size. I have to set the timeout to almost 10 min for this vi to not produce a timeout error. The results returned are correct but it just seems that the time to run this vi is excessive. It is quering a database on the same system that the quering vi is running on. Should I expect better preformance?
Thanks
Todd

Verne,
I have boiled down the code to this attachment. This query took almost 7 min to return 22 results from a database size that is listed as 2.09877E+6. I have also tried the Alarms and Event Query to spreadsheet vi also and it takes the same amount of time. I am wondering if I place the Alarms and Events into the same (Citidel) database that the traces are going if it would be much faster. I seem to get trace data back very fast. If I recall correctly I seperated the alarms from the trace because I was having some sort of problem accessing the alarm data in the combined database...but that was several labVIEW versions ago. Anyone else having this problem?
Thanks
Todd
Attachments:
Generate Alarm Log General Test.vi ‏19 KB

OBIEE -10.1.3.4.1 - high physical and logical query response

Hi All,
I am facing an performance issue in OBIEE 10g .My report is taking 2 mins to come up and when i fired the physical query in the db the data is coming in 2 secs.
Below is the details from the log file.Here I observed that response time for physical and logical query is 109 sec ~ 2 mins.Please provide me the helpful pointers.
+++Administrator:370000:370015:----2013/01/22 07:28:04
-------------------- Execution Node: <<2650466>>, Close Row Count = 3332, Row Width = 26000 bytes
+++Administrator:370000:370015:----2013/01/22 07:28:04
-------------------- Execution Node: <<2650466>> DbGateway Exchange, Close Row Count = 3332, Row Width = 26000 bytes
+++Administrator:370000:370015:----2013/01/22 07:28:04
-------------------- Execution Node: <<2650466>> DbGateway Exchange, Close Row Count = 3332, Row Width = 26000 bytes
+++Administrator:370000:370015:----2013/01/22 07:28:04
-------------------- Query Status: Successful Completion
+++Administrator:370000:370015:----2013/01/22 07:28:05
-------------------- Rows 3332, bytes 86632000 retrieved from database query id: <<2650466>>
+++Administrator:370000:370015:----2013/01/22 07:28:05
-------------------- Physical query response time 109 (seconds), id <<2650466>>
+++Administrator:370000:370015:----2013/01/22 07:28:05
-------------------- Physical Query Summary Stats: Number of physical queries 1, Cumulative time 109, DB-connect time 0 (seconds)
+++Administrator:370000:370015:----2013/01/22 07:28:05
-------------------- Rows returned to Client 3332
+++Administrator:370000:370015:----2013/01/22 07:28:05
-------------------- Logical Query Summary Stats: Elapsed time 109, Response time 109, Compilation time 0 (seconds)

Did you run the SQL from a client on the OBIEE server or your local machine? Does the Physical SQL on the OBIEE server against the DB run in 2 Seconds and when sent by the OBIEE server it takes 109 seconds?? Is that correct?

Difference between Report painter and abap query .

can anyone please tell me the difference between the report painter and the ordinary alv,clasical reporting and also the difference between Report painter and abap query. How the output format will be in Report painter. If anyone has any documents please send it to
[email protected]
Thanks,
Joseph.

hi,
ABAP Query is an ABAP Workbench tool that enables users without knowledge of the ABAP programming language to define and execute their own reports.
In ABAP Query, you enter texts and select fields and options to determine the structure of the reports. Fields are selected from functional areas and can be assigned a sequence by numbering.
link for abap query --
https://forums.sdn.sap.com/click.jspa?searchID=221911&messageID=2790992
whereas the Report Painter enables you to report on data from various applications. It uses a graphical report structure that forms the basis for the report definition. When defining the report, you work with a structure that corresponds to the final structure of the report when the report data is output.
link for report painter --
https://forums.sdn.sap.com/click.jspa?searchID=221874&messageID=1818114
Regards,
pankaj singh
Message was edited by:
Pankaj Singh
Message was edited by:
Pankaj Singh

Query on a table runs more than 45mins(after stats) and same query runs 19secs(before stats - rebuild)

Query on a table runs more than 45mins(after stats) and same query runs 19secs(before stats - rebuild) - Not sure what the cause is.
- Analysed the explain the plan
- different explain plan used afterr stats gather.
Any idea what could be the cause with this kind of difference.
Thank you!

What is the difference you see in the explain plan ? Where it spends most time. All these needs to be analysed.

Sapquery , adhoc query and Infoset query

any body having any material for ADHOC QUERY , SAP QUERY and Infoset query with detail explanation and steps for creation.
plz forward it to me??????????

hi,
   sap query r used to design reports to see the data according to our selections in this daa is fetched from diff tables its much easier to desing reports using this
             infoset query is somthign used with BI ints used to read data form PSA some temp storage loc
           if i am wrong someone correct me
reward if useful
ravi

How to link EKBE and MKPF tables

HI all
plz help me,
how to link EKBE and MKPF tables
thanks
ramesh redddy

HI,
EKPO-EBELN = EKKO-EBELN has Purchase Documnet no.
MSEG=MBLNR = MKPF-MBLNR has material document no
Link MSEG-EBELN = EKPO-EBELN ( MSEG purchase prder no and EKPO purhcase document no.)
and you should have to add one more table MSEG which is provide three table.
check this link
EKPO-EBELN = EKKO-EBELN
MSEG-EBELN = EKPO-EBELN
MSEG=MBLNR = MKPF-MBLNR
regards,
PK.

ABAP Reports and SAP Query

Hi Experts,
I have question regarding ABAP Reports, SAP Query, and Transaction with variant. How are we securing one the above reports that we assign them through pfcg. We can secure custom program by custom transaction or define the auth group in S_PROGRAM auth object but in this case we have to assign SA38 in production. is that correct?
Please help me understand difference between the ABAP reports and SAP query. Is the ABAP reports same as Program or they are different.
Thanks in advance
Faisal
Edited by: Faisal on Jun 30, 2009 11:06 PM

Hi,
1) End user security (role matrix coordinate with process team)
This role Matrix design is most important where we can put restrictions and use SoD.
2) Secure Table (by auth group)
Table TDDAT and use of transaction se54 for security tables to right auth Groups. Secure s_tabu_dis, s_tabu_cli.
3) Secure program (as you said ABAP reports are referred to Program)
Use of table TPGP and program RSCSAUTH for assignment of groups to Program. SA38 Running of SA38 requires a minimum SUBMIT in user Action. A user having SA38 is dangerous as he/she is now enabled to run any report. Hence protection in Auth Group is needed. Verify each and every program is having authority check statement and Auth Group or not before assigning sa38. As you mentioned its best to avoid SA38 and create CUSTOM TXN for each report.
(We should also SECURE S_DEVELOP in Production properly along with ur points. Please Note).
4) Secure some batch jobs roles for batch job
Secure by s_btch* objects and less access to se36.
5) Create support roles for cutover activity during Go-live
That is always needed. Go ahead.
6) Emergency roles & IT roles for support
This is very much needed as a role of Mitigation and Fire Fighting for Temporary access. Ensure to enable ur audit parameters in RZ10 (rsau* sm20,RSLG* for sm21). Give emergency access but enable audit via sm19 and get audit reports from sm20 and sm21 immediately after the use of emergency access.
There are also other auth objects we need to be care ful which is a long list and hope every body ensures that (s_cts,a_admi,s_trans, tables ssm_cust, prgn,t000) etc and a host of others. Besh wishes. Let us know if any issue.
Regards
Aveek.

One of the user is unable to remove obsolete Tags from new work items and search query

Hi I am new to TFS Administration, User has some obsolete Tags in TFS site which is removed on the Backlogs but user can see those tags when he is creating new work items and while querying the Work Items but he is not able to see any obsolete tags in Backlogs.
TFS version: TFS 2013 SP2
Steps followed:
we queried each tags, we see 0 work items associated with the tags
As per MSDN, we have to remove associated tags which automatically removes the Tags after 3 days
The user is facing the same from past week
Am i missing something? or will the list of Tags be available in new work items and querying WITs? Please help
Thanks in Advance

Hi BE,
I tested this scenario in my TFS 2013 Update 4 Server, and found that Tags will disappear from Tags dropdown list automatically after serverl days, if there’s no any work item associated that Tags.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

EKBE and EKBEH query

Similar Messages

Maybe you are looking for