EKET-FIXKZ set after partial goods receipt of subcontract delivery schedule

Dear all,
when booking a partial goods receipt (via MIGO) of the finished product of a subcontract delivery schedule the schedule line becomes fixed (EKET-FIXKZ = 'X'), which hinders the next MRP run to modify the delivery schedule according to the new requirements.
I have tested to change the fixing indicator via SE16 and the next MRP run will then replan the sub contract delivery schedule correctly. But this is no solution.
Is there a way to modify this setting via an EXIT or BADI in MIGO ?
Many thanky for your help
Rabanus Diehl

Similar Messages

Delivery complete indicator set by partial goods receipt in kanban orders

HI Experts,
we recently upgraded to ECC 6 DIMP EP 6. Now for kanban production orders delivery complete indicator is set for partial goods receipt. Under delivery tolerance is zero. Is there any notes available for this issue. Manual production order goods receipt is fine.
THanks
RIjil

Hi,
Let me try and understand your scenario better. You have a production order triggered by KANBAN. You then do a GR via inventory management of a partial quantity. Would you then GR the remaining quantity?
The reason I ask is because this is KANBAN production, the bin being filled multiple times for the same trigger does not sound right. The system behavior of not expecting further deliveries (by setting delivery complete) seems appropriate.

Partial Goods Receipt for Inbound Delivery

Hello Frends,
We have a requirement to generate partial goods receipt against Inbound delivery created in Intercompany scenarios, however when we analzed there two alternative ways possible -
1. Goods Receipt in Inbound Delivery - Transaction VL32N : In this transaction,ssytem allows goods receipt for complete quantity but not for partial quantity
2. Goods Receipt reference to Inbound Delivery - Transaction MIGO : In thsi transaction, there is a provision to generate partial goods receipt however system not updating the status in inbound delivery document.
In this regard, requesting your support on what is possibility to fulfill our requirement, is there any standard SAP approach for this.
Appreciate your support. Thanks
Best Regards,
Goutham

Hi,
Thanks for your quick reply..
I have a outbound delivery with 100 EA, now system automaticallly generates a Inbound delivery for 100EA using output message. Now we need to generate partial goods receipt for the inbound delivery, mean first 20, then 40 and the remaing.
What are the best practices available since when I check from the Inbound delivery,we cannot make partial goods receipt.
Best Regards,
Goutham

Split/change line in Purchase Order after partial goods receipt

Hi
I have a PO with multiple lines/items. For one line there has been a partial goods receipt and for the open qty there will be a delay. Do I have any chance to either:
- Change the delivery date for this row to match the ETD of the open qty
- Change the initial qty of the line to the one received (that the line closes) and open a new line with the correct date for the open qty
I just cant change anything in a line for which a partial goods receipt has been posted.
Thanks
Franz

Hi Gordon,
Thanks for the info. Another idea: How about ..
- adding the item on a new line with the open qty and the correct date
- simply closing the partially posted line with the open qty (is that ok from the DB view?)
Any doubt that this could work as intended?
Thanks
Franz

VL32N Change inbound delivery quantity after a partial goods receipt

Dear.
I have created an inbound delivery using VL31N from a purchase scheduling agreement.
I have executed a partial goods receipts using MIGO for the inbound delivery.
I need to reduce the delivery quantity for the inbound delivery using VL32N but the system donu2019t allow to change the delivery after a goods receipt.
How can I proceed ?
Thanks for your help.

Hi,
When a (partial) goods receipt has been posted to an inbound delivery item, the possibilities to change this item are restricted.
If the delivery quantity is the same as the goods receipt quantity, then the item is fully posted goods receipt. No change of quantity is possible.
If the delivery quantity is still higher than the goods receipt quantity, you can create one or several new TO's for the rest and
confirm, if needed, with differences.
You have also the chance to adjust the delivery quantity to the picked (and already posted) quantity with VL32N and menu:
Edit => Copy Putaway Quantities as Delivery Quantities
Please also have a look at note 796053.
Hope this can help
Regards
Mauro

Need rounding off value for partial Goods receipt

Hi,
My requirement is that the PO value,PO tax value ,GR value and Invoice value(IR) should get rounded off.
When I am using the PO value which is rounded off in PO, but at the time of posting partial goods receipt the value for the GR/IR clearing or the stock value is not getting rounded off for these G/ls.
What should I do for this to get the rounded off values in GR.
Regards,
Goraksh

Hi Goraksh,
The problem is that the pricing (incl. the rule 17) is not normally called at the time of GR. As Jürgen wrote, the system just uses the "net value" field of the PO.
I have however a "wild" idea. If the price in the PO comes from the info record or from a contract (and not changed manually there), then you can set the "pricing date category" = 5 there, meaning "GR date". This causes the pricing to be called again at the time of GR and your formula 17 will fire.
The side effect of course is that the price that you had in the PO, printed and sent to the vendor will not be binding: if you change the PIR price before the GR, the GR will be posted to the new PIR price, despite the fact that the PO printout showed something else. So the question is if the price printed on the PO is indeed binding in your business case - in many business cases it is the current vendor price that matters for the billing by the vendor, not the one that you prined on the PO. For such business cases you should have had pricing date category 5 anyway...
BR
Raf

Shipping notification created after occurred goods receipt

Hello,
We have in place a standard confirmation process for intercompany purchase orders. This means that when the outbound delivery is created, the system generates an inbound (confirmation) linked to the PO line.
We have noticed that after the goods receipt has been performed, when users enter the outbound delivery in change mode the system generates output (EDI output) and a new confirmation is created and placed into the PO.
This has as consequence that if the delivery completed in the PO is not yet set, unreal quantities are shown as expected in the ATP check.
Has anyone experienced this issue before?
Thanks.
JC Garita

Dear,
Please check you make the PO with account assignment category (K, A, O) so while you make the GRN with reference of PO so system will make the MM document and also FI document but stock will direct hit to concern cost center, Asset, or Order.
and stock will not be updated or appearing in MMBE or any standard reports.
Regards,
Aamir

Partial goods receipt for PO with multiple line items

Hello All,
While doing MIGO, for a PO with multiple line items, if one line item is having error, will we be able to go ahead with goods receipt? Or entire material document is blocked for doing MIGO?
We will be doing a development - in case if there is problem in goods receipt (checking of any parameter, and if it is missing - we will be posting error message)...is it possible to ahead with next line item and still post the material document?
If partial goods receipt if possible for PO with multiple line items, how do we do it?
Regards,
RJS

Hi
While doing MIGO, for a PO with multiple line items, if one line item is having error, will we be able to go ahead with goods receipt? Or entire material document is blocked for doing MIGO?
No. You cannot post the MIGO, if even one of the PO line item is having problem or giving error.
We will be doing a development - in case if there is problem in goods receipt (checking of any parameter, and if it is missing - we will be posting error message)...is it possible to ahead with next line item and still post the material document?
If you skip a line irem and do GR with next line item, how will you match quantity & value with the vendor Invoice at LIV ?
If partial goods receipt if possible for PO with multiple line items, how do we do it?
Partial goods receipt is possible for PO line items. That means, if PO has 100 qty for line item 1 then you can do GR for 50 now and 50 later depending on the vendors delivery.
Hope this is what you mean by "Partial Goods Receipt".
Edited by: Arun R on May 10, 2010 2:03 PM

Partial Goods Receipt

Hi,
Is it possible in SAP Business One to create a partial Goods Receipt of a service from a purchase order?
Thank you.
Nadia.

Hi Nadia.....
In case of Service Document there is no meaning of Quantity if I'm not wrong.
So
you can make a partial GRN with respect to Document Value based on Purchese Order.
But if you have Item GRPO with Service Item then it may be possible to tak Partial GRN based on PO Qty wise.
As SAP asks you to put the Qty mandatorily.....
Regards,
Rahul

Partial goods receipt & invoice settlement

Hi All,
I want to know the process of partial goods receipt. I want to know how the PO is created for this purpose and GR is done for partail goods receipt. Also how the invoice is settled for only quantity received??

hi buddy
no need to make any special po
make the normal po
then do gr with the partial quantity , at time of migo ie gr u will find quantities change that with ur partial quantity
then do the miro ie invoice verification ,system will take automatically the gr quantity ie partial and show price accordingly
this way u can do the partial gr and settlement
but now if u dont want to do the gr of remaining quantity then just in me22n ie change po in delevery tab in item level give indecator of delevery completed and also lock the item from item overview
this might helpful
reward if useful

Post Goods Receipt for Inbound Delivery using WHSCON IDoc

Dear All
Currently I am working on a big project dealing with EDI connections to our logistics partner for the Export business. The entire message flow between Lindt and our partner should be via EDI. Our SAP release is (still) 4.6c.
We will create two kinds of despatch advice messages, one for inbound deliveries and one for outbound deliveries for customers.
I would appreciate your support in the following problem that I am facing with the inbound delivery scenario:
We create stock transport orders (purchase orders, POs) for the goods intended to be delivered into the plant at our partner
We create a delivery (type NL = replenishment delivery) for this POs
As soon as we post the goods issue we send the despatch advice (as EANCOM D96A DESADV message) to our partner.
At this point the delivery is basically completed, i.e. packing status (PS) and goods movement status (GM / GS) are equal to 'C' (= completed).
Our logistics partner uses the same EDI message to send us the goods receipts data, e.g.:
We dispatched 50 units of a product => QTY:50:12
The partner received indeed 50 units => QVR:50:66
Please note that we do not use the QVR segment for the quantity difference (between despatched and received quantity) but it contains the received units. This way we avoid negative values in the QVR segment.
When the logistics partner sends back the DESADV message containing the received quantities (QVR segment) we want to make
the goods receipts for the products in the original stock transport order and
upate the message flow in the delivery
My idea was to transform the incoming DESADV message into a WHSCON.DELVRY03 IDoc based on the documentation in: [Delivery Interface|http://help.sap.com/saphelp_crm40/helpdata/en/e2/654b15a9f411d184ec0000e81ddea0/content.htm]
In the delivery header control E1EDL18 I used QUALF = 'PGI' (Post goods issue).
I prepared an inbound WHSCON IDoc according to the documentation mentioned below. I managed to get some feedback from the Idoc processing implying that the system tried to do the goods receipt in the PO but failed.
To make a long story short here are my questions:
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
Does anybody have an example on how to fill the WHSCON IDoc?
Or is my approach a cul-de-sac ?
Kind Regards
Uwe
PS: A related question can be found here: Goods Receipt in PO AND Message Flow Update in Inb. Delivery using WMMBXY

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

Problem for Goods Receipt for Subcontracting Purchase Order

Dear all,
Presently, we are using SAP version 4.6C and we need to introduce GR for
Subcontracting Purchase Order. We have developed a ABAP program to handle
subcon Goods Receipt by uploading flat-files from our subcontractor. The
scenario is as follows :
Goods Receipt for Subcontracting Purchase Order
1. In the ABAP program, function BAPI_GOODSMVT_CREATE will be used for goods
movement.
2. Data provided to the function are as follows :
- Posting date
- Document date
- Material number
- Plant
- Storage location
- Batch
- Movement type (101)
- Quantity
- Purchase order number
- Purchase order item
- Movement indicator (B - Goods receipt for purchase order)
3. The function will do data verification and automatically determine GI
item for subcon stock:
- Movement type (543)
- Special stock (O - parts prov. vendor)
- Material
- Quantity
- Plant
Our problem is that :
Only the GR item in the interface is to be transferred and the GI item is
determined by the system. So, the quantity for subcon stock cannot be
changed using this BAPI. Then the system will continue processing the goods
receipt and create material document.
Manually, by using transaction code MIGO, the user can display the subcon
stock data and then change the quantity.
By using transaction code MB01, after the user fills in all the GR fields,
the system comes to line item 002 (subcon stock data) and then quantity can
be changed.
As per user requirement, quantity for GI item must be same with the quantity
that has been transferred to subcon vendor in Delivery for Subcon
(transaction code VL02N).
We cannot achieve this requirement by using the BAPI mentioned above. Would
appreciate any valuable help from anyone who is able to help us on this
matter. Are there any other BAPI's that can help us to achieve the same
result ?
Thank you in advance and best regards.

As far as i understood the problem I suggest u to create the
BDC according to user actions that are performed in he manual
operation.
I can't say that the BAPI performs the exac solution what you want.
I have done some BDC work using MB01 and suggest you to be careful
and try to keep the complete in the logic as some chages in rows in BDC will
change the complete scenario.And throw correct quantity val in correct
material
row.
This methodology will help u even in mass uploads.
Or in case of automation u can perform the call transaction BDC in
background mode.
so As per my understanding bdc program is the solution. pls try and let me
know.

Batch number issue when posting goods receipt for Subcontracting PO

Dear expert,
I always heard there will be issues while posting goods receipt for subcontracting PO. If the component is managered by batch.
No batch number will be proposed during PGR in MIGO...
I dont quite understand where is the issue??
My understanding:
We have batch managered components and End Product. All have batch numbers, then we PGI the stock to 'SC stock' via 541 movement type.
Then Vendor will finish the end product and send us back the end product.
We consumption the components use 543 O movement type? And GR the end product..
So while goods receipt, the sytem just need pick the existing batch number for both components and finish products..
Where are the issues???
Thanks.

Hoo Laa wrote:
I have questions for people always mentioning there are issues with batch determination while post goods receipt for subcontracting orders.
>
> I am thinking maybe they didnt active the batch determination for 543 movement type..
>
> Thanks.
Hi Hoo,
You are right!!
Setting of batch number determination has its importance in Mvt Type be it 541, 543....
The issue you might have observed would be with Batch Determination in Goods Issues which folks find it bit tough to achieve n make it work for them.
Cheers!!
Shiva

Inbound IDOC to post goods receipt with inbound delivery as reference

Kindly let me know the message and IDOC type for
Inbound IDOC to POST GOODS RECEIPT with inbound delivery as reference
I tried using WMMBXY but it didn;t work.
Pls let me know asap.Your help is appreciated.
Thanks and Regards
Priti
Edited by: Priti Adukia on Feb 11, 2008 4:48 AM

Hi Nicole,
What I've to do is quite the same as the case. Outbound and Inbound are in the same SAP system. If I've good understanding, I must set partner profile as follows :
INBOUND - Parter LI with
                        Message DESADV
                        Operation code DELS
OUTBOUND - Partner KU
                        Message DESADV
                        Operation code ???
Please advise
Suchart

Batch needs to be created 1st then post goods receipt with inbound delivery

Hi,
We are having split valuated materials with batch managed, we need to post goods receipt with inbound delivery.
When we create inbound delivery with PO batch is blank which is correct.
Now when we try to post GR with IBD in VL32N we need to put batch, but we are getting error message as batch is not available in receiving plant.
In this case we have to create batch 1st with MSC1N and then we can put batch number in Vl32N and can post GR.
If material is not split valuated we can put batch manualy(Without creation in MSC1N) in VL32N and it is allowing to post GR with batch.
Can you please let me know this behaviour, is there any SAP note available about this behaviour.
Thanks
Sudhir

Hi Uwe,
Can an inbound WHSCON IDoc used for doing both the goods receipt in the PO and the update of the message flow in the delivery?
The binary answer would be no. You should use WMMBXY or MBGMCR instead.
But if we are doing goods receipt against Inbound delivery then answer is YES with additionally E1EDL18-QUALF = 'PIC' populated. But please remember no partial receipt is possible against Inbound Delivery.
We should populate E1EDL20-VBELN with our Inbound delivery number and line item info should go to E1EDL24.
I have done a similar interface recently where we are doing receipt against Inbound delivery. But our case was a bit complex because we had to support against Inbound delivery. So we had to go for a custom solution on top of IDOC_INPUT_DELVRY.
Hope this helps. Let me know if you have more questions.
Regards,
Rudra

EKET-FIXKZ set after partial goods receipt of subcontract delivery schedule

Similar Messages

Maybe you are looking for