Emacs is displaying the first column of the line on the last column of the previous line

The first column of my lines are being displayed on the last column of the previous line. This a very irritating glitch that I have no clue how to fix or even troubleshoot. (red bars were added using preview to hide personal info)
I've downloaded MacPorts and reinstalled emacs:
GNU Emacs 24.4.1
Copyright (C) 2014 Free Software Foundation, Inc.
GNU Emacs comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of Emacs
under the terms of the GNU General Public License.
For more information about these matters, see the file named COPYING.
I'm open to any suggestions on how to fix this graphical glitch.
Much thanks
Message was edited by: Conner_36

Given that the Emacs for OS X works ok and the Emacs shipped with OS X works it would seem to be some issue with MacPorts and their version.
Totally unfamiliar with MacPorts so have no idea how the program gets compiled,what libraries it is using and what if any config settings are needs or set so I'm afraid I won;t be much help there. That you are on a MBP with a retina display may be part of the problem.
So with the setup you have now, hardware and software including OS, it was working and then just like that it stopped? Something much have changed around the time it stop working if you can think back to then it might help you resolve the problem.
As you are doing programming can i assume you have Xcode and the command line tools installed? If not how do you compile your code? The reason I ask is compiling Emacs from there GNU source is not all that difficult. It might be worth trying that.
One last thing given that the two other versions of Emacs displayed the file OK this strongly suggests the problem is not in your .emacs file or your environment however as I wrote I am not familiar with MacPorts so it is possible there is another config file messing you up. As a test for this create a new user or log in as the Guest user (this is best as you;re guaranteed the environment is clean) and look at the file in question in MacPorts Emacs. If it displays OK then there is something in your environment causing this, If it messes up even in the new user then I'd say ditch MacPorts..
regards
<edit>
Just to rule out init files if you start emacs with the -q(minus que) flag the .emacs file is not read in, if you use --no-site-file it will not load the site file if it exists.
I'd try running the MacPorts emacs with those two flags to see f anything changes.

Similar Messages

How to get ALV Display with First column alone in sort

How to get ALV Display with First column alone in sort

HI,
You can build Internal Table and send this to the parameter "IT_SORT".
eg:
"the sorting Internal Table structure is as whown below.
DATA: t_sort_info type slis_t_sortinfo_alv.
"Build the Sort Internal Table
t_sort_info-fieldname = 'CARRID'.
t_sort_info-subtot = 'X'.
append t_sort_info.
t_sort_info-fieldname = 'FLDATE'.
t_sort_info-subtot = 'X'.
append t_sort_info.
Then pass this "IT_SORT_INFO" table to the Function module "Reuse_alv_*". (Note send the body of the Internal table only like "<b>IT_SORT = IT_SORT_INFO[]</b>".
Here i am making ALV output sorted on CARRID & FLDATE.
You can specify only the First Column name for sorting.
Regards,
Manju
Message was edited by:
MANJUNATHA KS

How to display the Previous years

Hi
CJE0 - 12KST1A costs:budget/actual/commt/rem.plan/assd
How to display the previous years budget in above mentioned report. at present the report is showing only cumulative value of previous years,2009 and 2010.....
My requirement is from 2005 to 2009 i want display the value in this report, please through some light on this.
Thanks
S.Murali

Hi
But i want check the previous years budget for some number of projects not one by one, because the number of project are more.
The above mentioned solution is for one by one i can check the pervious years budget. But my requirement is collective.
Thanks
S.Murali

Avoid the browser cache display the previous version of my flash website

I frequently update my website. But customers do not see immediately the changes as the cache displays the previous version.
How do I avoid this? Any advice is highly appreciated.

Hi, this is a bit of a wrong forum since your problem doesn't pertain to AS per se, but for what it's worth I'm gonna tell you how i deal with the browser caching and it helped me (both SWF and JavaScript caches). I always use the Dreamweaver site and after I'm done compiling the SWF file I suply "Upload" the file to the testing/remote server. Hope that helps.

I purchased a used iphone4 and the phone displays the previous owners apple id and prompts me for the previous owners password. how do i get rid of his info....and install my own apple id number?

I purchased a used iphone4 and the phone displays the previous owners apple id and prompts me for the previous owners password. how do i get rid of his info....and install my own apple id number?

Login to the app store with YOUR ID. You can't use the app store without an Apple ID. If there are apps on the phone that were purchased with the original owners ID, you do NOT own them. The owner had no legal right to give them to you and they are permanently tied to the ID that was used to purchase them.
...i was also allowed to purchase an apple network id for this phone...
I have absolutely NO IDEA what you mean by that. You can not "purchase an apple network id".

Is there an about:config option to change FF's default action when closing a tab so that it displays the previous tab rather than the next tab?

With the new 3.6 tabbing behaviour (new tabs open to the right of the current tab, rather than at the end of the tab list), the old default behaviour when a tab is closed is no longer appropriate. Instead of displaying the next tab after the one that was closed, FF should display the previous one. Is there an about:config option to change the default behaviour upon closing a tab?

Try one of these:
*Tabberwocky: https://addons.mozilla.org/firefox/addon/14439
*Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122
*Tab Control: https://addons.mozilla.org/firefox/addon/1480

I am a Flash developer. When I change a Flash file (SWF) and try to test it, Firefox displays the previous version even though I have cleared the cache. Clearing the cache obviously doesn't clear everything. Why?

I developed a Flash file (SWF) with a light blue start button, placed it on a web server then went to the URL using Firefox (3.6.8). Later I updated the SWF (changed the button to dark blue), replaced the SWF on the web server, opened Firefox and used Tools/Clear Recent History... to clear the cache. Then when I went to the URL to test the replaced SWF it clearly opened the previous version (light blue button). How can that happen if the previous version no longer exists on the web server? Firefox can only be opening the file from its cache, so why is the file still there if I just cleared the cache?

Your not alone!
I had the identical issue with iPhone config Utility on windows 7 64bit.
A virtual macOS on the same machine didn't have a problem, windows iTunes didnt have a problem. Just a glitch with ICU on windows
I tried everything you did and the only thing that fixed it was to change the appID or app name (I forget which I did).
I don't know where that old app data is stored on the machine, but I deleted all apps, uninstalled/reinstalled ICU and it still would populate and install the old ipa.
I also still periodically get weird errors/glitches deploying to iOS on windows.
It's like some days I need to deploy with ICU, sometimes iTunes, sometimes I need to run the VM mac... SOO frustrating.
It always works one way or another, so the app itself is always fine.
I guess I really need to look into that new direct deployment option...

Ip link doesn't display the previous option of wlp4s2

^'s the problem. Can't connect to the internet now unless I boot from the USB stick. I've tried the other three options it spit out on me (lo, enp2s0, irda0; wlp4s2 being the fourth one that is visible and active when I boot from the USB stick), none of which worked. I've searched the forums, and the issues (and subsequently solutions) are sure helpful, but they do not seem to pertain to my current situation.
Help? q,q
Last edited by Jim Lewis (2014-11-08 15:35:11)

Have you followed the steps on the Wiki page for network configuration in the actual installation?

Please help me! display the record from the database.

Hi, all, please help me with the following question. I run my code on the web, the record display on the screen, but when I run again, even I did not put any data into the "memo form", the system display the previous record again which I do not need to post again. Could you please tell me how to correct the code?
<%@ page language="java" contentType="text/html; charset=Shift_JIS" %>
<%@ page import="beanYama.*,java.sql.*,java.util.*,java.text.*" %>
<HTML>
<HEAD>
<TITLE>Form Example</TITLE>
</HEAD>
<BODY BGCOLOR="#ffffcc">
     <%!      String userid="";
          String memo_create_day="";
          String memo="";
     %>
     <% if (request.getParameter("userid")==null && request.getParameter("memo_create_day") == null
          && request.getParameter("memo") == null) { %>
     <LEFT>
     <H2>��`�� </H2>
     <FORM METHOD="GET" ACTION="memocorrect.jsp">
     <P>
          ��`��1��: <input type="text" name="userid" size=26>
     <P>
          ��: <input type="text" name="memo_create_day" size=26>
     <P>
          ��: <input type="text" name="memo" size=100>
     <P>
          <input type="submit" value="Submit">
     </FORM>
     </LEFT>
     <% } else { %>
<%
userid = request.getParameter("userid");
memo_create_day= request.getParameter("memo_create_day");
memo= request.getParameter("memo");
%>
<% } %>
<%
     boolean proceed = false;
          if(userid != null && memo_create_day != null && memo != null)
                    proceed = true;
     Class.forName("org.gjt.mm.mysql.Driver");
     Connection conn=DriverManager.getConnection("jdbc:mysql://localhost/progress?user=ntjs&password=ntjs&useUnicode=true&characterEncoding=Shift_JIS");
     String sql = "insert into zhangmemo (userid,memo_create_day,memo) values (?, ?, ?)";
     PreparedStatement stmt = conn.prepareStatement(sql);
     if (proceed) {
     stmt.setString(1, userid);
     stmt.setString(2, memo_create_day);
     stmt.setString(3, memo);
     stmt.executeUpdate();
     if (userid==null && memo_create_day==null && memo==null) {
     out.println("<b>Please enter your memo</b>" + "</b>&nbsp"+"<b> </b>");
     stmt.close();
     conn.close();
     else {
     Statement stmt1=conn.createStatement();
     ResultSet rsq=stmt1.executeQuery("SELECT userid AS userid1, memo_create_day AS memo_create_day1, memo AS memo1 FROM zhangmemo");
     while(rsq.next()){
     out.println("<b>��`��:" + rsq.getString("userid1")+ "</b>&nbsp"+"<b> </b>");
     out.println("<b>��:" + rsq.getString("memo_create_day1")+ "</b>&nbsp"+"<b> </b>");
     out.println("<b>��:" + rsq.getString("memo1")+ "</b>&nbsp"+"<b> </b>");
     stmt.close();
     stmt1.close();
     conn.close();
%>
</BODY>
</HTML>
Thanks a lot!
Nina

1. Please learn JSP Coding standards. Your code is a mess.
2. It may be because you are setting your String variables to "" empty string which is not the same as null. Try doing the following...
<HTML>
<HEAD>
<TITLE>Form Example</TITLE>
</HEAD>
<BODY BGCOLOR="#ffffcc">
<%
String userid = request.getParameter("userid");
String memo_create_day = request.getParameter("memo_create_day");
String memo = request.getParameter("memo");
%>
<% if userid == null && memo_create_day == null
&& memo == null) { %>
<LEFT>
<H2>��`�� </H2>
<FORM METHOD="GET" ACTION="memocorrect.jsp">
<P>
��`��1��: <input type="text" name="userid" size=26>
<P>
��: <input type="text" name="memo_create_day" size=26>
<P>
��: <input type="text" name="memo" size=100>
<P>
<input type="submit" value="Submit">
</FORM>
</LEFT>
<%
boolean proceed = false;
if(userid != null && memo_create_day != null && memo != null)
proceed = true;
Class.forName("org.gjt.mm.mysql.Driver");
Connection conn=DriverManager.getConnection("jdbc:mysql://localhost/progress?user=ntjs&password=ntjs&useUnicode=true&characterEncoding=Shift_JIS");
String sql = "insert into zhangmemo (userid,memo_create_day,memo) values (?, ?, ?)";
PreparedStatement stmt = conn.prepareStatement(sql);
if (proceed) {
stmt.setString(1, userid);
stmt.setString(2, memo_create_day);
stmt.setString(3, memo);
stmt.executeUpdate();
if (userid==null && memo_create_day==null && memo==null) {
out.println("<b>Please enter your memo</b>" + "</b> "+"<b> </b>");
stmt.close();
conn.close();
else {
Statement stmt1=conn.createStatement();
ResultSet rsq=stmt1.executeQuery("SELECT userid AS userid1, memo_create_day AS memo_create_day1, memo AS memo1 FROM zhangmemo");
while(rsq.next()){
out.println("<b>��`��:" + rsq.getString("userid1")+ "</b> "+"<b> </b>");
out.println("<b>��:" + rsq.getString("memo_create_day1")+ "</b> "+"<b> </b>");
out.println("<b>��:" + rsq.getString("memo1")+ "</b> "+"<b> </b>");
stmt.close();
stmt1.close();
conn.close();
%>
</BODY>
</HTML>

How to display the contents of servlet request using the swing component.

I am trying using the servlet to receive the request of the J2ME client. When the request will be there, this should be automatically displayed by the swing User Interface. Again, that component should display the previous requests made alongwith this request.

Shriprasad wrote:
I am trying using the servlet to receive the request of the J2ME client. When the request will be there, this should be automatically displayed by the swing User Interface. Again, that component should display the previous requests made alongwith this request.This makes no sense. Either there's a lot you're leaving out (maybe you're receiving requests on a server, then storing data, and you want to expose the data later via a console of some kind implemented in Swing?), or you don't understand what you're talking about.

Display the second report as modalform and filter with primary key value of first report when you click on first report column link

Hi All,
I have two reports.
1. order report
2. order detail report
when you click on the order report column it display the order detail report as a modal form.
i was done below steps.
1. In page header i was written the below code
<link rel="stylesheet" href = "http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/themes/
redmond/jquery-ui.css" type="text/css" />
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.2/jquery.js"> </script>
<script src="http://ajax.googleapis.com/ajax/libs/jqueryui/1.7.2/jquery-ui.js"> </script>
<script type="text/javascript">
$( function() {
$('#ModalForm1').dialog(
autoOpen : false ,
width :470,
height: 500,
resize :false,
function openForm1()
$('#ModalForm1').dialog('open');
function closeForm()
$('#ModalForm1 input[type="text"]').val('');
$('#ModalForm1').dialog('close');
</script>
2. order report.
3. order detail report
select * from order_details where order_id = p_order_id;
region header
<div id="ModalForm1" title="Ordered Items" style="display:none">
<p class="msg"></p>
footer
</div>
4. created the hidden item in order detail report.
5. in order report column attributes i was given link like below.
javascript:$s('p_order_id','#order_id#');openForm1();
when i click on the order report column link it passing the row primary key value to hiddent and open the report as modal form. however it is not filter the report with hidden item. it showing the no data found.
problem is hidden item value is not submitting. once we submit that value it showing the 2nd report with filter data.
can any help me to achieve above requirement.
apex: 4.2
oracle 11g
Regards,
Vijay.

Vijay,
Issue 1: Your usage of $s() JavaScript API seems to be wrong. For the first parameter, you need to use the name of the hidden page item and not p_order_id.
javascript:$s('P1_ORDER_ID','#ORDER_ID#');openForm1();
Issue 2: Seems like you are not setting the hidden page item's value in session state. Assuming your hidden page item is called P1_ORDER_ID, Under "Region Definition" tab of your "Order Detail Report" under "Source" tab, for page items to submit, enter the name of the hidden page item P1_ORDER_ID.
Thanks!
JMcG

Result display in the first column.

Hi all,
My report displays some amounts per fiscal periods in column. At the moment I can display the Result for all the periods in the last column, but now I'd like to display this result in the first column. Do you know how to do that?
Curent report:
                  FiscPer1     FiscPer2    RESULT
WBS 1         10               30              40
WBS 2           3                1                4
Wished report:
                   RESULT     FiscPer1      FiscPer2
WBS1             40              10                   30
WBS2              4                 3                     1
Thanks!

Hello-
Go to Table display option in the designer and make your objects alignments as needed save and execute the same.
You can align the previous last column to the first coulumn( I mean rearrange the objects ) thru table display option.
Regards,
Vishwa.

I want to display a first word in the data of a column

i want to display the first word
example: Software Engg Ooo
answer should be Software
using simple query no nested queries

10g:
SQL> select regexp_substr('Software Engg Ooo','[^ ]+') from dual;
REGEXP_S
Software

Values not getting displayed from first page of the report.

Values in the report is getting displayed from second page.
First page in the report only displaying the report title and column names.
Secone page onwards, data and column names are generated.
Can any one please help me, with the cause of the problem.

what reporting tool?
Interactive Reporting
Financial Reporting

How to display the content of a BLOB column in a ADF/BC pages ?

How to display the content of a BLOB column in a ADF/BC pages ?
There is some image in database table blog column. And we want to display image on the screeen.
There is some example about upload and dowload blog columns.
(steve not yet document example page etc...)
But We want to display blog picture in a image component...
is there any basic way to do it ?
Thanks a lot...

Ali,
You could just download the sample app... but... here is the servlet code from the demo (look at it just for technique - you'll obviously have to change it for your needs)...
John
package oracle.fodemo.storefront.servlet;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import javax.servlet.*;
import javax.servlet.http.*;
import oracle.jbo.ApplicationModule;
import oracle.jbo.Key;
import oracle.jbo.Row;
import oracle.jbo.ViewObject;
import oracle.jbo.client.Configuration;
import oracle.jbo.domain.BlobDomain;
import oracle.jbo.domain.DBSequence;
import oracle.jbo.domain.Number;
import oracle.jbo.server.ViewObjectImpl;
public class ImageServlet
extends HttpServlet
private static final String CONTENT_TYPE =
    "image/jpg; charset=windows-1252";
public void init(ServletConfig config)
    throws ServletException
    super.init(config);
public void doGet(HttpServletRequest request,
                    HttpServletResponse response)
    throws ServletException, IOException
    response.setContentType(CONTENT_TYPE);
    response.setContentType(CONTENT_TYPE);
    String detailProductId = request.getParameter("detail");
    String thumbnailProductId = request.getParameter("thumbnail");
    boolean thumbnail = true;
    String productId = null;
    OutputStream os = response.getOutputStream();
    String amDef = "oracle.fodemo.storefront.store.service.StoreServiceAM";
    String config = "StoreServiceAMLocal";
    ApplicationModule am =
      Configuration.createRootApplicationModule(amDef, config);
    ViewObjectImpl vo =
      (ViewObjectImpl) am.findViewObject("ProductImages"); // get view object (the same as used in the table)
    if (detailProductId != null)
      productId = detailProductId;
      thumbnail = false;
    else
      productId = thumbnailProductId;
    vo.defineNamedWhereClauseParam("paramThumbnail", null, null);
    vo.defineNamedWhereClauseParam("paramProductId", null, null);
    vo.setWhereClause("DEFAULT_VIEW_FLAG = :paramThumbnail AND PRODUCT_ID = :paramProductId");
    vo.setNamedWhereClauseParam("paramThumbnail", (thumbnail? "Y": "N"));
    vo.setNamedWhereClauseParam("paramProductId", productId);
    vo.executeQuery();
    Row product = vo.first();
    BlobDomain image = (BlobDomain) product.getAttribute("Image");
    InputStream is = image.getInputStream();
    // copy blob to output
    byte[] buffer = new byte[10 * 1024];
    int nread;
    while ((nread = is.read(buffer)) != -1)
      os.write(buffer, 0, nread);
    os.close();
    vo.setWhereClause(null);
    vo.removeNamedWhereClauseParam("paramProductId");
    vo.removeNamedWhereClauseParam("paramThumbnail");
    Configuration.releaseRootApplicationModule(am, false);
}

Emacs is displaying the first column of the line on the last column of the previous line

Similar Messages

Maybe you are looking for