Email Output on any changes done in sale documents

Hi all,
Give me a suggestion. Is there any output type to trigger an email output to a sales partner (sales employee) when a sale document is changed.
Regards,
Mahibhan

Hello Mahiban,
Goto NACE transaction> Select V1 for sales> Select output type--> Go to description (let, BA00). Goto general tab and activate check for multiple issuing.
If you add an order item to a sales order for which the order confirmation was already sent, you will want to send a changed output to the same customer this will trigger the same.
Hope it helps.
Reward points if helpful.
Regards,
Priyanka

Similar Messages

  • Status Profile - Restrict any changes made in sales document

    Hi SD Guru's
    I have a situation here. I have maintained status profile with one of the status as "REJ - Reject Sales Order". Now when i set that status "REJ" and save the order, and open it by transaction VA02, i can make any changes in the order document such as adding new line item. I want to restrict any changes for this order now. How can i tackle this situation. Can you please help me with the same, its urgent.
    Regards
    Ravi

    Dear Ravi
    This can be controlled in two ways.
    1)  Through User Exit : MV45AFZZ by not allowing the specific users to make changes
    2)   With the help of your Basis Team, authorization of VA02 should not be allowed for the said users.
    Thanks
    G. Lakshmipathi

  • Error in Change Log of Sales Documents

    When i try to see the Change Log of sales document (Tools> Change Log) I get an error message
    No matching records found " (ADOC)(ODBC - 2028) [Message 131-183]
    What can it be ?

    Yes it should, but maybe those documents were created before the "History / Log" in General Settings > Services were changed from 0 to (example) 99.
    Only after this action, information will be recorded in the Chang Log.
    Regards
    Carin

  • I want to change my security questions (that I don't remember) but the recovery mail is misspelled wrong by the server (I can't get the email) how I can change done recovery mail without security questions?

    So, yesterday I wanted to buy 2 albums but it was the first buy in this device (I reset mi iPad 2 months ago) so it asked me for my security questions to confirm my identity but since is been a long time since I "used" me security questions I don't remember it so, eventually, I asked for the email to change either my password or my security questions but the email has 2 misspelled letters by a server error instead of being hotmail.com is writted a*******@hormail.clm sop I can't get any email, I already tried changing the mail email and the secondary email but still is the same mail a*******@hormail.clm so how I can change this without my security questions?

    Security questions:
    https://discussions.apple.com/docs/DOC-4551
    http://support.apple.com/kb/HT5312
    This is also useful:
    http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email

  • Full PO output for any change in PO ( EDI output)

    Hi Gurus...
    Currently whenever there is a any change in PO only the relvant change
    is sent for EDI out put ( Standard SAP)
    Our client requirement is whenever there is a change in PO the full PO
    should be sent to EDI out put ( same as when purchase order is created).Change is required for a specific vendors.
    Your help on the issue ASAP is highly appreciated.
    Thanks
    Dipak

    Hi,
    Go for  changeable indicator 6 in release indicator
    OR
    Go for User exit EXIT_SAPLEBND_002 or check to modify function module ME_REL_STRATEGIE_EKKO for to reset existing release strategy for reduced quantity and/or values.
    Regards,
    Biju K

  • How to see any changes done in BOM through Engineering change management?

    Dear experts,
    My client need to verify the revision of some assemblies in BOM through ECM.
    I tried to verify it by taking some change numbers & executing it in CC03. I am getting the history date & name of person who done the changes. But can not able to see the actual changes.
    Could you please tell me how to see the changes done?
    Thanks in advance for cooperation & support.
    Regards,
    Mehul Veni

    Dear Mehul Veni,
    Assuming you have created a change number through CC01 and made changes in CS02 for a particular BOM by entering this
    change number in the input screen in CS02.
    Once after making BOM changes,save the data and check in CC03>enter the same change number>menu->environment-
    >reporting->Bill of material--->select the change number and click on expand sub-tree and you will get all the required details.
    Check and revert
    Regards
    Mangalraj.S

  • How does the delta works for changes made to Sales Document

    Hi Experts,
    How does delta for 2LIS_11_VAITM for the changes made to Sales Order Header.....
    Example:
    If a sales order had 10 line items any changes at the item level are captured by 2LIS_11_VAITM
    Could you please update me on how the changes made at Sale Order Header level like Change of contract Date...etc
    Does those changes are captured by 2LIS_11_VAITM.......
    Please update

    Hi,
    SAP written lots of programs inside the Extractor, so it is not possible to tell how it will work, so you goto RSA2 in ecc and give the datasource and click on display and see the Function module and debug it you will know.
    Thanks
    Reddy

  • Output determination does not happen during Sales Document creation

    Hello All,
    I am facing an issue where the automatic output determination does not happen when the Sales Order is created. Let me explain a bit on the background.
    Output type ZDL2 has been defined as a special function (TNAPR-NACHA = 8) attached to a custom program and Form routine to create Outbound delivery after successful posting of the sales order.
    Condition records are maintained to trigger this output for the Key Combination of Sales Org/Distrib Channel/Division/Route. Access sequence has also been correctly maintained for the above fields.
    When the Sales order is saved, the output is supposed to be triggered but out of several sales orders created, it triggered for just one document. We have no clues on what could be the issue.
    One question here is, can we have the access sequence maintained for the fields from both header and item level (ie KOMKBV1 and KOMPBV1). Please be reminded that, in our case, the field ROUTE comes from the field catalog KOMPBV1.
    Another point which we noticed is that, the Function Module COMMUNICATION_AREA_KOMPBV1 which is supposed to fill the Item data Communication structure for output determination was never called.
    Has anyone came across such situations. Comments or suggestions are really appreciated.
    Kind Regards
    Sabu Kuriakose

    Sabu Kuriakose,
    Since you are using ROUTE as one parameter for the condition table, and it is at the item level.
    the output is triggered at the header level.
    So a sales order can contain multiple items with different routes. so at header level how will u identify the route ?
    the fields might be available for creatign the condition table but the problem is the fields should get the value during order processing.
    in the analsysis screen you will know that the field is getting the value of the ROUTE  or not ?
    also for creating a delivery you need a shipping point. same as above you can hae multiple items with different shipping points. how will u consider that scenario.
    If you can explain that, then that will be helpful to answer your problem.

  • Change log of Sales Documents/Item in notification

    Hi Guru,
    if sales documents/item in notification is changed or removed, the system didn't record the changes in the change log, where I can set it to record the change log for notification?
    Thanks,
    Kick

    Yes it should, but maybe those documents were created before the "History / Log" in General Settings > Services were changed from 0 to (example) 99.
    Only after this action, information will be recorded in the Chang Log.
    Regards
    Carin

  • How to copy word document with bullet to email body without any changes

    when I paste word doc to mail body symbols all are changed..

    when I paste word doc to mail body symbols all are changed..

  • Sales document header-- head text changes not working in VA01 if we rasie with reference to quotation

    Hi,
    Greetings!!
    We have raised a quotation, in this quotation we have manually updated Job number (1234) and project number (9876) in header--> header text and saved the quotation.
    With reference to this Quotation we raised a sales order(VA01)  and here we have changed job number from 1234 to ABCD and project number  from 876 to EFGHIJ and saved the sales document but system by default takes quotation  job and project number only. If we go to change mode of sales document (VA02) our changes working fine.
                    ould you please let us know how we can overcome this issue?  Or this is standard  behavior or what?
    Regards,
    Sree

    Hi,
    Text determination configuration is done in VOTXN
    check VOTXN for your text determination procedure and under access sequence check if there is any routine added

  • Change indicator for sales orders

    Hi All,
    I would like to know when a change is done to a sales order (in VA02), in order to automatically change its status to the default.
    Does SAP stores a flag that indicates whether the order was changed?
    Thanks!
    Amit

    Hi Amit,
    Whenever any changes done to any object(eg. Sales Order, Material Master, Customer Master,etc.) in SAP, it is recorded in change document table CDHDR. This table records following important fields,
    Object Value
    Old Value
    New Value
    Change date
    Time
    Transaction(By which changes are done)
    So you can find all the changes done to your sales order in this table.
    Just Run SE16 >> Table CDHDR >> put your sales order no in field OBJECT VALUE and execute.
    I hope this answers your question.
    Regards,
    Mohit

  • How to know whether there is any change in a transaction in ic webclient

    Hi,
    There is one activity screen in the ic web(CRM 5.0). There is two button(Change, Save , Sendnotification) on that screen.
    Sendnotification: if i click this button then it will check whether there is any change done using  below logic and will send the noti..:
    DATA:lv_transaction   TYPE REF TO if_bol_transaction_context,
    lv_entity       TYPE REF TO cl_crm_bol_entity.
    lv_transaction = lv_btorder->get_transaction( ).
          IF lv_transaction->check_save_needed( ) EQ 'X'.
             then save the changes  and send notification
          ENDIF.
    Question:
    Now i clicked on the Change button and did some changes.Then saved.
    Then again i did some changes, now i clicked on the Sendnotification button.It sent an notification.
    Now i again clicked on the Sendnotification(this time i didnt do any changes), it sent the same notification again.
    So how to know that  actully changes done or not & how to write code if there is no changes?
    During debugging , i found that the method check_save_needed always returns 'X' as long as i am in the chage mode of that activity. As a result if i dont do any changes also in the activity and click the button , it sends the notification.
    please suggest how to restrict  using coding........
    Thanks
    sudhansu

    Not solved.

  • Changes done in options are not effected - not able to change home page

    When I do changes in the tools-options menu the same is not effected in the next re-start of firefox. For example if I change my home page to a new web page, the same is not opening in the next restart of firefox. Not only this any change done in the options menu is not effected

    See:
    * http://kb.mozillazine.org/Preferences_not_saved
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols

  • Re-Release of PO in case of any changes

    All SAP Gurus,
    We have a release strategy for PO.
    Our requirment is 'if we do any changes in the released PO (may it be the text or any thing)' the released PO should go for re-release.
    How it can be done?
    Regards,

    Hello Rajan,
    If you want to have control based on change in any value release st. should re trigger you will have to go for some enhancement, but for any Value change release st will re trigger if you use the changeability (which determines how a Purchase document react to change in value) as 4 set under release indicators set in the release strategy design. this will solve your problem.
    Also release strategy is determined based upon the Characteristic Values maintained under classification data for release strategy.
    So in this case if you want to have a design like new rel st should trigger for any changes done to PR/PO then you should ask for some enhancement, but other way control, based upon change in value can be done by solution mentioned above.
    regards,
    Prashant Rathore.

Maybe you are looking for