EMAIL PROBLEMS APPRECIATE SOME HELP PLEASE

I accidentally tried to send a large pdf file by email via my .mac account. I tried to cancel the send when I realised it was 192meg
Since then I cannot send or receive email at all and the little circle thing (that spins when checking email on an account) keeps searching but does nothing else (been doing it for nearly 4 hours now!)
Every now and then a message comes up saying: Some actions taken while the account ".mac" was offline could not be completed online...Mail has undone actions on some messages so that you can redo the actions while online. Mail has saved other messages in mailbox “On My Mac” in “On My Mac” so that you can complete the actions while online. Additional information: The connection to the server “mail.mac.com” on port 993 timed out.
I click the only options, which is 'ok' then it continues searching
So I read the help topic and it gave an option that perhaps my account is full so i clicked get info, the relevant account, then quota limits as instructed
it says it is 'calculating sizes' but has done that for nearly the past 2 hours now and doing nothing! So as a last resort I am hoping somebody on here could advise what I can do.
thank you
<Post Relocated by Moderator>

At this point I think you need to call .mac and ask them to look into and delete the messages. If your mac is no longer connected to the server, and it's still duplicating then it's not your mac sending the command to copy, it's something on the .mac end.

Similar Messages

  • 865pe Neo2-V problem. need some help, please

    i clocked my CPU [email protected](box culer-40C idle) and i believe that i can raise FSB more but i have problem.my Kingmax(512ddr400) goes to 505 MHz, and i can't stop her. i can't put FSB/DRAM 1:1. it is allways 4:5. My old Transcend too. So it isn't memory. In BIOS i have options:
    ddr - 266/333/AUTO. i have tried 333 and AUTO and DDR is 4:5. Also, i don't know where i can turn off "performance mode".
    DDR modul is in slot1. I did not tryed to put him in slot2 or 3. Default timings are 2.5/3/3/7. i chosed 2.5/4/4/8.
    also, when i chose "by speed", BIOS do nothing, and latencies is like before i chose "by speed" so i need to chose 2.5/4/4/8 by myself.
    BIOS version is 6.1(latest)
    this is my stable selection:
    CPU - 3.33 GHz(18x185) - 38 C temperature now/ motherboard 29 C
    DDR - 462 MHz
    Thanks

    my memory now runs @ 1:1 after i chose option DDR 266 and my cpu goes @3.78!!!!!!!!. excelent.

  • Bit of a problem need some help please

    import java.io.*;
    class IO
    public static void main(String args[])
    String sOutString = "";
    int iRecordLength = 0;
    int iWork=0;
    int[] array = new int[21];
    try
    // creat input file, buffer.
    FileInputStream fis = new FileInputStream("myInFile.txt");
    BufferedInputStream bis = new BufferedInputStream(fis);
    DataInputStream dis = new DataInputStream(bis);
    // Create an output
    String fileName = "myOutFile.txt";
    File myOutFile = new File(fileName);
    FileOutputStream outStream = new FileOutputStream(myOutFile);
    PrintWriter out = new PrintWriter(outStream);
    out.println ("This is the header record");
    String record = null;
    while ( (record=dis.readLine() ) != null )
    String sTest = "";
    sTest = record;
    if (iWork==0)
    iRecordLength = sTest.length();
    sOutString = sTest.substring(0, iRecordLength);
    System.out.println(sOutString);
    out.println (sOutString);
    System.out.println(sTest.substring(0, 5));
    out.close();
    // System.out.print ("\n");
    catch (IOException e)
    System.err.println("File Error; " + e);
    System.out.println("");
    System.out.println("Ended");
    System.exit(0);
    // use get chars w substring
    Ok theres my code what im trying to do is substring my in file so that it will take a section of it out and put the rest in
    an out file. The problem is that my in file has a few lines and i do not know how to dubstrin g different linec can anyone help me?

    Well,
    I took the liberty of rewriting your code to make it readable, and expurgated most of the carp... what you've got there boils down to a really complicated-azzed implementation of cat.
    package forums;
    import java.io.BufferedReader;
    import java.io.FileReader;
    import java.io.PrintWriter;
    import java.io.BufferedWriter;
    import java.io.FileWriter;
    import java.io.IOException;
    class FileCatterator {
      public static void main(String args[]) {
        BufferedReader input = null;
        PrintWriter output = null;
        try {
          input = new BufferedReader(new FileReader("FileCatterator.java"));
          output = new PrintWriter(new BufferedWriter(new FileWriter("FileCatterator.txt")));
          String line = null;
          while ( (line=input.readLine()) != null ) {
            int len = line.length();
            String substring = line.substring(0, len);
            System.out.println(substring);
            output.println(substring);
        } catch (Exception e) {
          e.printStackTrace();
        } finally {
          if(input!=null)try{input.close();}catch(IOException e){e.printStackTrace();}
          if(output!=null)output.close();
    }The substring doesn't do anything.
    Now, What did you need it to do? Print the first so-many characters of each line or something?

  • Would appreciate some help please?

    Sorry if I am posting in the wrong section!
    I own the C470 all in one had it two days.  A couple of things; my hard drive light flashes a lot is this normal?
    It seems very slow, concerned dont know what programs I can uninstall, have uninstalled the games, what else can I do?  If there is a problem may need to return to amazon and ask  for a replacement, any assistance please, have to say used windows 7 home premium before and could get round it okay
    Many thanks Joules

    The harddrive light flashing could be normal. Have you done all the windows updates? When you say it is slow, is the harddrive access slow, internet slow, or once a program has started it runs slow?
    Hoov
    Microsoft MVP - Consumer Security
    SpywareHammer.com

  • I bought an album on iTunes and 3 of the songs only play for 30 seconds. I have tried re-downloading the album 3 times and the problem has not been fixed. I would like some help please and thank you.

    I bought an album on iTunes and 3 of the songs only play for 30 seconds. I have tried re-downloading the album 3 times and the problem has not been fixed. I would like some help please and thank you.
    Artist: Imagine Dragons
    Album: Night Vision

    Report it here:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • NOKIA N97...EMAIL PROBLEMS...HELP

       I need some help  please....I have a Nokia N97 which I recently purchased..love the phone but like most people I have had a few problems and recently have had to remove battery and restart a few times...
    Now what is happening is that my email widget still appears on my home screen but my current emails are not showing...last emails showing are from 5 days ago and I know for a fact that I have lots more that are not coming through...when  I click into my widget its the same...none there from the last 5 days....I only have the basic Nokia email programme operating that came with my phone....my setup has obvioudly changed in some way....Help please...

    Hi, try removing the widget, then go into messaging=options-settings-email-mailboxes-options​-delete, Once you've deleted your mailboxes, go into Applications, seff,wizard and set up your mail again,
    Also have you removed all possible apps from C and re-installed on E, and in messaging-options-settings-other-set memory in use to E-Mass memory and number of messages to 500 ?
    Another thing to check is settings-phone-application settings-messaging-email-mailboxes-select mailbox-retrieval settings-retrieval amount-set to all andin automatic retrieval-E-mail retrieval-set to enabled.
    Good Luck
    If I have helped at all, a click on the White Star is always appreciated :
    you can also help others by marking 'accept as solution' 

  • UIX DataObjects - some help please

    I'm doing some interesting things with DataObjects and don't understand why something's happening and would like some help please. An explanation is needed first. Rather than physically delete anything from our system and have all the problems of referential integrity we have a status associated with 'entities' either active or inactive. Some of the things which have this status are foreign keys in other entities my example is a Brand which has a BrandType. My problem is that by default when populating e.g. a choice list our services will only provide 'active items'. However, using my example, if I want to update a Brand that has a foreign key to an inactive BrandType, I want the inactive BrandType to appear in the list. I have an EJB service which provides the list of BrandTypes and whose interface allows for the specification of an 'id' to be included. I have a DataObject stored on the pageState (currentBrand below) which contains this id and I want to pass this 'id' as a parameter to another DataObject which actually returns the DataObjectList of BrandTypes to populate the choice list. With me so far? Hope so! This DataObject is also part of the 'currentBrand' DataObject stored on pageState (brandTypes@currentBrand).
    So to do this I have this data binding on my <messageChoice> element
    <messageChoice    name="brandType"
                      data:prompt="label@type@fields@pageResources"
                      data:shortDesc="shortDesc@type@fields@pageResources"
                      data:selectedValue="brandTypeId@brand@currentBrand">
      <contents data:childData="(brandTypeId@brand@currentBrand)@brandTypes@currentBrand">
        <option       data:text="name"
                      data:value="id"/>
      </contents>
    </messageChoice>And this is my selectValue in the 'brandTypes' DataObject which will get the 'id' from
    (brandType@brand@currentBrand) as its key
      public Object selectValue(RenderingContext pContext, Object pKey) {
        Long id = (Long)pKey;
        Long[] ids = new Long[1];
        ids[0] = id;
        HttpSession session = getSession(pContext);
        UserToken userToken = getUserToken(session);
        GetBrandTypeRequest request = new GetBrandTypeRequest();
        request.setUser(userToken);
        request.setOutputModeType(OutputMode.ENTRIES_ONLY);
        request.setActiveStatus(Status.ACTIVE);
        request.setSelectionType(SelectionType.ALL);
        request.setIds(ids);
        return BrandTypeCache.getBrandTypes(request).getBrandTypes();
      }The return value is actually an array of DataObjects (which will get converted to a DataObjectList). Now this actually works as far as rendering is concerned but in debugging I've found that the selectValue method is actually being called several times 10 in fact when I would have only expected it to be called once. I wondered if it was being called for every item in the list but there are only 9 of those. There's obviously a performance issue as I'm calling my EJB service each time selectValue is called.
    Hope this all makes sense - can anyone tell me what's going on here and what I can do to fix it?
    Thanks
    Ian

    Already answered in another thread.
    Is This a bibeans bug

  • HT201269 i am trying to get my contacts from an old iphone 3s to a 5c and i am not getting the new phone to stay connected to itunes. some help please on what to do!

    i am trying to get my contacts from an old iphone 3s to a new 5c and i am not getting the new phone to stay connedted to itunes. some help please on  this problem!!!

    One way is to Drag and Drop the  Entire iTunes Folder  from your Old Computer to an External Hard Drive...
    Then Drag and Drop the  Entire iTunes Folder to the location of your Music on the New Computer...
    These Links may Help...
    Backup iTunes to an External Drive
    http://support.apple.com/kb/HT1751
    Moving iTunes Media Folder
    http://support.apple.com/kb/HT1364
    Cheers

  • Would appreciate some help here still fairly new to MAC

    Ok I've made the mistake of installing a program called Anacron which is supposed to help with the maintenance of OS X. Well I found out after the fact that there is no need to install ANY programs for maintenance as it is all built into the OS now. So I went to uninstall it and wow has this been a headache . First off there is NO uninstaller and when following the read me file that I found to uninstall it, part of it works and part of it doesn't. This is the information to just disable it (not delete it):
    How do I disable or remove anacron?
    To disable anacron, run the following commands in a terminal:
    cd /Library/LaunchDaemons
    sudo launchctl unload -w ./anacron.plist
    cd /System/Library/LaunchDaemons
    sudo launchctl load -w ./com.apple.periodic-daily.plist
    sudo launchctl load -w ./com.apple.periodic-weekly.plist
    sudo launchctl load -w ./com.apple.periodic-monthly.plist
    The above worked, but the info which is supposed to help you delete it all together does NOT work and I would appreciate some help/comments on why it doesn't. Here is the info for deleting it:
    To completely remove anacron from your system, delete (trash):
    /usr/local/sbin/anacron
    /usr/local/share/man/man5/anacrontab.5
    /usr/local/share/man/man8/anacron.8
    /Library/LaunchDaemons/anacron.plist
    /etc/anacrontab
    /var/spool/anacron
    /Library/Receipts/Anacron.pkg
    When I use Terminal to get in there and delete that stuff, when I try and delete Anacron, I'm given a list of file attributes (I guess) .. it looks something like this:
    override rwxr-xr-x root/wheel for anacron?
    What in the world does this mean and how in the world can I get this crap deleted from my system? Seems like everything I do is not enough to get this stuff deleted.
    Thank you for your time

    "Are you borrowing some frined's account, you have lots of messages here for a guy fairly new to mac"
    No, the mac is mine, and this is my account. I still consider myself pretty new to MAC OS X. The time of me registering here is right at the same time I received my iMac which is just over a year. To me that is still pretty new I may have a buttload of posts, but that doesn't mean I know a lot about MAC OS X and the MAC computers.
    I certainly appreciate your help with this problem. It worked flawlessly. This is very much like DOS in windows......yuk, just reflecting on the past. Thank you again, sooo much. I now feel much better, what a relief.
    Edit: Oh by the way, just answering "Yes" gave me, if I remember correctly, something about forbidden. But doing it the way you described above using the sudo lines worked great and it asked me for my user password, I put it in, then everything was ok, it deleted everything I wanted it to.
    Message was edited by: QuickDraw

  • Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

    Remote App on iPad connects but drops after about  20 mins. Need to turn  off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
    Already gone through troubleshooting guide a zillion times. Thanks.

    This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
    I got my artwork and saved it to my Desktop
    Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
    Clicked "resize" and a box for changing it opened up
    Checked the box "Pixels" and "Unchecked maintain aspect ratio"
    Set Horizontal for 640 and Vertical for 480
    Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
    It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
    Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
    Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
    Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
    Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

  • Hi! I got movies on my external hard drive that are AVI kind and won't play on my macbook pro? need some help please!!

    Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.

    Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player.  It may supply the codec it needs.
    Not sure why you wouldn't be able to play straight avi files though in quicktime.

  • HT4061 I was trying to update my phone now is asking me to restore my phone, can I have some help please?

    I was trying to update my phone now is asking me to restore my phone, can I have some help please?

    https://discussions.apple.com/message/18750831#18750831

  • I buy extension from adobe online, i installed it correctly but then the extension menu was greyed out and i can't click it. Some help please.

    I buy extension from adobe online, i installed it correctly but then the extension menu was greyed out and i can't click it. Some help please.

    hello ptbruce, you probably only selected to open (not save) the video which will download it into windows temporary folder where it gets deleted again after it has been used. <br>you could try to right-click the entry in the firefox download manager and copy the link of the source file and try if you can download it through this url again. otherwise you'll have to contact the vendor of the video to find a solution...

  • I am trying to download and install OSX Mavericks but everytime i input my Apple ID it keeps asking to review my account and then starts looking for credit card info, I do not have a credit card, also I thought OSX Mavericks was free, some help please.

    I am trying to download and install OSX Mavericks but everytime i input my Apple ID it keeps asking to review my account and then starts looking for credit card info, I do not have a credit card, also I thought OSX Mavericks was free, some help please.

    Yes I know it's free, but Im trying to find out how to download it and install, but I keep getting account review and asked for CC details as I have no CC I can't get the download or install it, any help please, what i don't understand is why would I be asked for CC details if it is a free download ?? i just want to know is there anything I can do.

  • I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

    I recently updated my computer to 10.6 and now I can't get my printer MX340 (canon ) to work. I have installed the new drivers both from Canon's website and from an earlier post directly from apples website. I would surely appreciate some help with this.

    Try what Terence Devlin posted in this topic:
    Terence Devlin
    Apr 14, 2015 11:21 AM
    Re: Is Iphoto gone ? i want it back!
    in response to Johannes666
    Recommended
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Maybe you are looking for