Email to be sent after condition record update in VK12
Hello Everyone,
I would like to know if any of you have worked on the following scenario,
a) Whenever you make an update to a condition record in VK12, we need to send an email informing the relevant person about the change.
We have been suggested that we can use actions instead of workflow.
I would appreciate it if anyone of you could help with this issue.
Cheers,
MR
Hi,
In standard SAP functionality it is not there either you can restrict or set authorisation, If you are looking for this function look for exits.
Thanks,
Swamy H P
Similar Messages
-
How to stop an email from being sent after I hit send?
How can I immediately stop an email from being sent after clicking "send"?
I can't seem to find any info on this. I am assuming that it is impossible. Correct?When sending the emails with larger attachments that take a little time to actually upload and get out, you can open the activity viewer by pressing command-0 (or is it command-o?--)--it may also be under the window menu at the top--I'm not at my Mac right now to check. The activity viewer has a stop button on it. After you stop it, you should be able to either delete the email from the outgoing mail folder or drag that email to another folder, such as the drafts folder. I've done this a few times without a problem.
-
Condition Record Updation Problem
Hi
Kindly note that after i maintain a condition in VK11 ,in the sales order item level , when i click on the Update button it does not get effected ,ie the condition is not updated in the line item in the order
Please advice
Regards
AkHi,
As I understood from your question, first time when you create the line item, price was picked correctly. And then when you click on the Update button, if went off. Am I right?
If that's the case, do like this. You'll be able to identify the issue.
First add another line item there with the same material. Then go to LI/ Condition tab. If the price is there, click on the Analysis button. Under that check your condition type. You'll be able to see how the condition record was determined.
Then do the Update button option.
Then again try with the Analysis button option.
You should be able to compare this with your previous findings and identify the cause.
Best regards,
Anupa -
Execution does not end even after all records updated..
Hi,
I have plsql code like :
declare
begin
for x in ( select .......) loop -- about 4000 times
for y in ( select ............) loop -- about 50 times
end loop;
-- some code goes here to manipulate clob data
-- like creating free temp clobs - use - then free them
-- Update statement that update some table using clob values.
insert into tablex values(sysdate);
commit;
end loop;
end;
Here I can monitor from other window howmany records are inserted into tablex and howmany updated in update statement by...
select count(1) from tablex;
After 50 mins i can see that all records are updated but...
plsql code does not end its execution it continues even after all records are updated..untill i have to kill the session or let be run for long time.. :(
I can not understand why this it is not ending execution..
What could be the problem ...Hi,
Here it is.....
declare
v_text_data TableA.text_data%type;
v_clob clob;
type dummyclob_t is table of clob index by binary_integer;
dummyclob dummyclob_t;
v_str varchar2(255) := 'ddfsajfdkeiueimnrmrrttrtr;trtkltwjkltjiu4i5u43iou43i5u4io54urnmlqwmreqwnrewmnrewmreqwnm,rewqnrewqrewqljlkj';
begin
select data bulk collect into dummyclob from sfdl_clob; -- five rows containing clob data upto 1MB
for x in (select object_id
from TableA
where object_type = 'STDTEXT' ) loop
dbms_lob.createtemporary(v_text_data,TRUE);
for y in (select '<IMG "MFI_7579(@CONTROL=' || ref_id || ',REF_ID=' || ref_id || ').@UDV">' temp_data
from TableB
where object_id = x.object_id) loop
v_text_data := v_text_data ||
case
when trunc(dbms_random.value(0,7)) = 0
then chr(10)
else v_str
end ||
y.temp_data;
end loop;
select text_data into v_clob from TableA where object_id = x.object_id for update;
if v_text_data is not null then
dbms_lob.append(v_clob,v_text_data);
end if;
dbms_lob.append(v_clob,dummyclob(trunc(dbms_random.value(1, 6))));
dbms_lob.freetemporary(v_text_data);
insert into xyz values (sysdate);
commit;
end loop;
end;
Thanks for your time..:)
Rushang. -
Hello all,
I have a requirement like this. Whenever a user create or change a PO, Then the info record should updated in me12 and also condition records needs to be updated in conditional records. I know how to update info records. But i dont know the FM or Bapi to update the conditional records from the PO. Please let me know the solution to update the info condition whenever Po Changed or manual Po created.
Thanks in advance,
RaviHi,
You cannot change the conditions in the info record from the PO as info record has time dependent conditions and PO had time independent conditions.
You can only update the last reference document in the info record and also the order price history in the info record but not conditions.
hope it helps u
reward if useful
Rohit -
Lost some emails on iPad after iOS update!help!
If the missing email is no longer on your email provider's server, there is no way to recover them. If this is an iCloud email address, you can check your mail on icloud.com from your computer to confirm whether the lost email is there or not.
-
No email, contact, or Calendar after 2.1 update
Dammit! I can't get my Pop 3 OR ActiveSync Outlook, Calendars or Contacts. Has anyone else had this problem after update? I am on eternal hold now with support, so thought I would post this in the meantime. I did notice in iTunes my "Sync Mail Account" to Outlook was unchecked. I rechecked and resynced and still no mail, contacts or calendar from server.
I could not get my mail from exchange after the update as well. I am concerned we are getting windows type answers with the iphone -- restart and wait for 5 mins -- or turn a feature off and on. This was the reason I moved away from the windows mobile phones and PCs.
In any case, I am told that there still may be an index re-build issue with the outlook email index. So to get your mail back, go to your exchange settings on the iphone and set the "Mail days to sync" to no limit.
Then go back to your mail contacts and calendar settings section and scroll to the bottom and set your calendar sync to all events.
I think this rebuilds the index and you can then get your mail back. As it starts downloading, you can go and revert these settings to the ones you want (aka 1 month etc) and once the index is built the mail appears. At least it did for me.
Don't forget to hold you breath and twirl around 3 times after the index is built -- good luck -- just kiddin... -
Iphone email won't boot after the latest update
Ive tried removing the account then restarting the phone and re entering the account, I've also followed the same process and reset the iPhone and re-entered the email account. Both with the same result. it crashes when opened. However, it still recognizes how many emails are in my inbox
I am having a similar issue whereas my inbox quit updating after the install 0f 8.1.2
-
Email shold be sent after locking an entry
hi everyone,
I am new to HR HCM Developments. I have configured bank information service in portal.
When user creates new entry it should get locked and one mail should be sent to administrator.
So i implemented a badi to lock the entry. But i am nt able to send the mail.
Is there any standard method or process to shoot mail whenevr the user will create and save the new entry?If change is done through PA* tcode, this can be done through dynamic action when IT0009 is created / changed using 'M' (send mail) in indicator step calling feature similar to 'M0001'.
However, ESS updates infotypes through specific function, I'm not sure if dynamic actions will be triggered . If not, you could probably call this 'send mail' feature within your current BADI (to lock entry) or simply just call SAP function to send mail (e.g. 'SO_NEW_DOCUMENT_SEND_API1') .
Rgds. -
Send email when first record updated problem
Hi guys i have problem
this code send email based on timer every 5 minutes
it working ok but my problem i need to determine first rcord updated not inserted
and send email this is starting work
this is my code
---timer1_Tick---
Sales.SalesClass SalesClass1 = new Sales.SalesClass();
DataTable dt = SalesClass1.ShowSalesData("Data Source=192.168.1.5;Initial Catalog=Altawi-last06-01-2015;User ID=admin;Password=123");
dataGridView1.DataSource = dt;
dataGridView1.Refresh();
namespace Sales
class SalesClass
public DataTable ShowSalesData(string ConnectionString)
SqlConnection con = new SqlConnection(ConnectionString);
SqlCommand cmd = new SqlCommand();
cmd.Connection = con;
cmd.CommandType = CommandType.Text;
cmd.CommandText = "showsales1";
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
DataSet ds = new DataSet();
da.Fill(ds);
DataTable dt = ds.Tables[0];
return dt;
SELECT ROW_NUMBER() OVER (ORDER BY dbo.[Jeddah-Live$Sales Header].No_) AS [م], dbo.[Jeddah-Live$Sales Line].[Document No_] AS 'رقم الطلب',
dbo.[Jeddah-Live$Sales Header].[Bill-to Name] AS 'العميل', dbo.[Jeddah-Live$Sales Line].Area AS 'نوع الصبه', dbo.[Jeddah-Live$Sales Line].Description AS 'البيان',
dbo.[Jeddah-Live$Sales Header].[Pump No_] AS 'المضخه', CAST(ROUND(dbo.[Jeddah-Live$Sales Line].Quantity, 0, 1) AS int) AS 'المطلوب',
CAST(ROUND(dbo.[Jeddah-Live$Sales Line].[Quantity Shipped], 0, 1) AS int) AS 'المصبوب', CAST(ROUND(dbo.[Jeddah-Live$Sales Line].[Outstanding Quantity], 0,
1) AS int) AS 'المتبقى '
FROM dbo.[Jeddah-Live$Sales Header] INNER JOIN
dbo.[Jeddah-Live$Sales Line] ON dbo.[Jeddah-Live$Sales Header].No_ = dbo.[Jeddah-Live$Sales Line].[Document No_] AND
dbo.[Jeddah-Live$Sales Header].[Sell-to Customer No_] = dbo.[Jeddah-Live$Sales Line].[Sell-to Customer No_]
The code above not have any problem and working
When first record updated send email
Example to show
orderno quantity shipped quantity
12 20 0
13 30 0
14 25 0
15 22 0
suppose order no 14 shipped quantity updated be 10 (meaning 0 be 10
then send email with starting work
after this any updated to any record not send
no problem i dont need any send email code but how to get record updated firstHi guys i have problem
this code send email based on timer every 5 minutes
it working ok but my problem i need to determine first rcord updated not inserted
and send email this is starting work
this is my code
---timer1_Tick---
Sales.SalesClass SalesClass1 = new Sales.SalesClass();
DataTable dt = SalesClass1.ShowSalesData("Data Source=192.168.1.5;Initial Catalog=Altawi-last06-01-2015;User ID=admin;Password=123");
dataGridView1.DataSource = dt;
dataGridView1.Refresh();
namespace Sales
class SalesClass
public DataTable ShowSalesData(string ConnectionString)
SqlConnection con = new SqlConnection(ConnectionString);
SqlCommand cmd = new SqlCommand();
cmd.Connection = con;
cmd.CommandType = CommandType.Text;
cmd.CommandText = "showsales1";
SqlDataAdapter da = new SqlDataAdapter();
da.SelectCommand = cmd;
DataSet ds = new DataSet();
da.Fill(ds);
DataTable dt = ds.Tables[0];
return dt;
SELECT ROW_NUMBER() OVER (ORDER BY dbo.[Jeddah-Live$Sales Header].No_) AS [?], dbo.[Jeddah-Live$Sales Line].[Document No_] AS '??? ?????',
dbo.[Jeddah-Live$Sales Header].[Bill-to Name] AS '??????', dbo.[Jeddah-Live$Sales Line].Area AS '??? ?????', dbo.[Jeddah-Live$Sales Line].Description AS '??????',
dbo.[Jeddah-Live$Sales Header].[Pump No_] AS '??????', CAST(ROUND(dbo.[Jeddah-Live$Sales Line].Quantity, 0, 1) AS int) AS '???????',
CAST(ROUND(dbo.[Jeddah-Live$Sales Line].[Quantity Shipped], 0, 1) AS int) AS '???????', CAST(ROUND(dbo.[Jeddah-Live$Sales Line].[Outstanding Quantity], 0,
1) AS int) AS '??????? '
FROM dbo.[Jeddah-Live$Sales Header] INNER JOIN
dbo.[Jeddah-Live$Sales Line] ON dbo.[Jeddah-Live$Sales Header].No_ = dbo.[Jeddah-Live$Sales Line].[Document No_] AND
dbo.[Jeddah-Live$Sales Header].[Sell-to Customer No_] = dbo.[Jeddah-Live$Sales Line].[Sell-to Customer No_]
The code above not have any problem and working
When first record updated send email
Example to show
orderno quantity shipped quantity
12 20 0
13 30 0
14 25 0
15 22 0
suppose order no 14 shipped quantity updated be 10 (meaning 0 be 10
then send email with starting work
after this any updated to any record not send
no problem i dont need any send email code but how to get record updated first -
After 9.3 update getting error printing to Adobe PDF while converting from Powerpoint to PDF
That happened after upgrading Acrobat Pro 9.1.2 to 9.2->9.3 on Windows XP sp2 platform. Converting from other Microsoft Office 2003 products is totally normal(Excel, Word) Did anyone came accross and know how to fix that?? We have many users with exactly same issue.
thanks...figured out my problem!
Date: Wed, 3 Feb 2010 12:24:29 -0700
From: [email protected]
To: [email protected]
Subject: Re: After 9.3 update getting error printing to Adobe PDF while converting from Powerpoint to PDF
What happens if you try to print to the Adobe PDF printer?
> -
Delete pricing condition records : vk12
When i mark a record as deleted in vk12, there add a tick in DeletionID column. I was told the record would be deleted after database reorgnization.
I want to ask, when will DB reorgnize? Would the deleted records be active before DB reorginze?
Can anybody help me?
Thanks a lothi Yimeng,
In v/06 for your condition type check the field delete from DB
If you set this field as A or B,then only you will be able to delete the condition record permanently via VK12.Otherwise you can only set deletion indicator. after u set the indicator in v/06, then goto
vk12 and set the record as delete.so the first one controls the actions in vk12.
condition record can be deleted in two ways
1.physical deletion
2.marked for deletion.
The customizing can be done at the condition type maintainance in V/06,
u have three options
1.physical deletion with pop up
2.physical deletion without pop-up
3.mark for deletion.
select an option there and in condition record in VK12, select the record and
and delete with the deletion indicator.
SAP recommends physical deletion
reward if it is useful
bye MCM -
Condition Record - Pricing Procedure
Hi
What is the T.code / IMG settings for creating a condition record in PRICING PROCEDURE ?
Thanks & Regards,
Senthil.Hi,
Easy access> Logistics >Materials Management >Purchasing >Master Data > Conditions >Other .
MEK1 - create
MEK2 Change
MEK3 Display
Service condition records ML51.
SD condition records,
VK11 create
VK12 change
VK31 create
Regards,
Chandra -
Hi,
I have a requirement to delete condition records. Please let me know if there is any BAPI or Function Module which deletes the condition records from VK12. Its very urgent.
Thanks,
MeenuMeenu,
Use VK12 and set the deletion flag.
The deletion flag means that the record is logically deleted and not phisically.
some of the conditions records cannot be delete, example 'MWST'.
In such cases, the best way is to change the end date to the current date.
more adding for you;
In v/06 for your condition type check the field delete fr. DB
If you set this field as A or B,then only you will be able to delete the condition record permanently via VK12.Otherwise you can only set deletion indicator.
Amit. -
Conditionally disabling record updation after query
Dear members
I've a single record block and I wanna conditionaly disable records updation after query has fetched data. Problem is that if I disable the record updation in Post-Query trigger then it checks the condition for the very first fetched record and it the condition is true, then Updation is disabled for all the fetched records, even if the next records dont meet the condition. I'm using forms-10g. Can u give a better solution??? thanx.you have to use SET_ITEM_INSTANCE_PROPERTY to modify only one record:
BEGIN
IF ... <your_condition> THEN
SET_ITEM_INSTANCE_PROPERTY('YOUR_BLOCK.YOUR_ITEM1', UPDATE_ALLOWED, PROPERTY_FALSE);
ELSE
SET_ITEM_INSTANCE_PROPERTY('YOUR_BLOCK.YOUR_ITEM1', UPDATE_ALLOWED, PROPERTY_TRUE);
END IF;
END;
Maybe you are looking for
-
TS1702 Can I use my iTunes balance to purchase in-app purchases?
I just bought a 15 dollars iTunes card, to use it to avoid using cards, in the game Defenders of Texel, but says that the purchase cannot be completed and to contact support. What I should do?
-
Null pointer exception when starting application
Hi: I had a application running fine, then i had to change some parameters in my RFC. I reimported the model, removed all the excess mapping, rebuild, deployed , restarted the server. Then when i run the application, i get the below error. Anyone has
-
help please
-
Howdy, Forgive my ignorance, I'm jus' a simple compooder pwogrammer. How do you paint some text centred in a jPanel (for instance). What I can't figure out is how to get the font height, and the width of this string... paintComponent takes a Graphics
-
4 EA2 Group By advice is wrong if there is a column alias.
Given the following query select snap_id,dbid, event,event_id, p1text, p1 file_no,sum(time_waited) time ,sum(p3) blocks from dba_hist_active_sess_history where event is not null and p1text='file#' group by snap_id,dbid, event,event_id, p1text, p1 ord