EmailMsg::Send::Failed to send the mail message error code: -49
can enyone explain me this error.
I want to send emails via IIS.
i've tested SBO Mailer to connect to IIS. TEST is succesfull.
SAP 2007 PL8
The sending user must have an email address set up in their user record (Administration>set up>general> users). Check this first, then, do a search in the SAP notes on error 49, you should find at least two notes for troubleshooting this eror message
Similar Messages
-
Failed to send the mail message error code: -49
Hi,
When sending mail outside the company (outside the domain), getting this error: Failed to send the mail message error code: -49
When sending mail internally (within the domain) successfully submitted.
I was looking for notes relating to the subject but could not find anything that helped me
I would appreciate your help,
HillaHi Gordon,
The problem was solved, the customer changed his ip adress on the server and it's OK now!
Thank you !!
Hilla. -
Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
Problem: Failed to open the connection. Error Code 0x800002F4 (-2147482892)
This is on two (2) separate machines. These are NEW INSTALLATION development work stations (laptops). One is Vista (Visual Studio 2008 / Crystal Reports 2008), and the other is Windows XP Pro (Visual Studio 2003 / Crystal Reports XI R1).
I am using EXISTING CODE (established over several years), and EXISTING REPORTS (established over several years). Old development station was XP Pro, as above, and still exists, and still works fine.
I can open the report in Crystal, and see the results just fine. Data for the report is obtained via ODBC.
Can someone identity the actual error by the Error Code above, and advise. Thanks You in Advance.Ok, so let's start at step 1:
SP 1 just released and I'd recommend applying that. The SO is available from here:
https://smpdl.sap-ag.de/~sapidp/012002523100010503722008E/cr2008_sp1.exe
For future reference, msm matching the above SP is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011715292008E/cr121_mm.zip
and msi is here:
https://smpdl.sap-ag.de/~sapidp/012002523100011722132008E/cr121_redist_install.zip
Step 2: a few questions:
a) I am not sure what CR SDK you are using; RDC, .NET? I suspect that you are using the CR assemblies for .NET, but do confirm.
b) what is the database you are connecting to?
c) is this a web or a win app?
Step 3: As the error can mean any number of things (to me it's just means something went wrong during the attempt to connect to the database...), the solution may vary, however the troubleshooting steps remain quite consistent:
1) Do make sure the report is indeed working in the CR 2008 designer (e.g.; make sure "saved data" is not enabled.
2) Try a simple new windows app with one of your reports. See if you have a report with no subreports and use it
3) If that works, use a report with subreports
4) If the above does not work in (1) above, create a new report to the same ODBC connection, do not code any database connection - let the report prompt for the logon parameter (PWD)
5) Run the new report in your new app, enter the PWD when prompted
6) If this works, add your database logon code
7) If that works, add your original report (again, preferably with no subreports)
8) If that fails, ensure that the subreport and main report use the same database connection type (ODBC)
9) If it works, see if you can determine the difference between your old app and the new app.
Ludek -
I am having problems burning CD's and DVD's all of a sudden.
I get the following message: error code 0x8002006E. I have followed all the intsrucciones
on Helps On Line from opening spece on my start up disc to allow burning thrue to disc repair with disc utility
and the problem still persists. Can anybody help ?
isanunezAre using the standard OSX Finder or do you have another finder application like Totalfinder?
Long discussion of this error here:-
https://discussions.apple.com/thread/1422026?start=0&tstart=0
There might be something there to help
Jerry -
Error while sending the mail( Database error for ADDR_PERS_COMP_COMM_GE)
Hello guys,
I am facing the error " Database error for <ADDR_PERS_COMP_COMM_GET> <0> " as a pop-up message.
below is my program.
types: BEGIN OF t_p0002,
pernr type PERSNO, "Personnel number
nachn TYPE PAD_NACHN, "Last Name
VORNA TYPE PAD_VORNA, "First Name
gbdat TYPE gbdat, "Date of Birth
END OF t_p0002.
*******************Data of an object which can be changed**************************************
data S_maildata type SODOCCHGI1.
*******************Text field length 255: texts***********************************************
data : IT_MAILTXT1 type table of SOLISTI1 , "Internal table will contain texts of mail header
WA_MAILTXT1 TYPE SOLISTI1,
IT_MAILTXT2 type table of SOLISTI1 , "Internal table will contain texts of contents in the mail
WA_MAILTXT2 TYPE SOLISTI1.
*******************Structure of the API Recipient List*****************************************
data : IT_MAILREC type table of SOMLRECI1,
WA_MAILREC TYPE SOMLRECI1.
DATA : it_pa0002 TYPE TABLE OF t_p0002,
wa_pa0002 type t_p0002.
data Header_text type c LENGTH 15.
CONSTANTS content_text type c LENGTH 35 VALUE 'Tomorrow is the birthday of'.
*******************Event start of selection***************************************************
start-of-selection.
PERFORM get_birthdate. " will give birthday details
PERFORM document_details. " will give text and mail details
*& Form get_birthdate
text : subroutine to get employee birthdate details
form get_birthdate.
data : l_date like sy-datum.
refresh it_pa0002.
l_date = sy-datum + 1.
SELECT pernr nachn vorna gbdat
from pa0002
INTO TABLE it_pa0002
where gbdat = '19650302'.
ENDFORM. "get_birthdate
*& Form document_details
text : subroutine to get texts and mail details.
FORM document_details.
CLEAR: Header_text,
wa_MAILREC.
REFRESH IT_MAILREC.
S_maildata-obj_name = 'Birthday Reminder'.
s_maildata-obj_descr = 'Birthday Reminder'.
s_maildata-obj_langu = sy-langu.
READ TABLE IT_MAILTXT1 INTO WA_MAILTXT1
WITH KEY WA_MAILTXT1-line .
WA_MAILTXT1-line = 'Birthday Reminder'.
append WA_MAILTXT1 TO IT_MAILTXT1.
CLEAR WA_MAILTXT1.
LOOP at it_pa0002 INTO wa_pa0002.
READ TABLE IT_MAILTXT2 INTO WA_MAILTXT2
WITH KEY WA_MAILTXT2-line .
CONCATENATE content_text ' ( ' wa_pa0002-pernr ' ) ' wa_pa0002-nachn wa_pa0002-vorna
INTO WA_MAILTXT2 SEPARATED BY ' '.
append WA_MAILTXT2 TO IT_MAILTXT2.
CLEAR WA_MAILTXT2.
CLEAR wa_pa0002.
ENDLOOP.
LOOP AT IT_MAILREC INTO WA_MAILREC.
WA_MAILREC-RECEIVER = 'Any mail id'.
WA_MAILREC-rec_type = 'U'.
append WA_MAILREC TO IT_MAILREC.
ENDLOOP.
********************Function Mofule:To Send new Document*****************************************
CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
EXPORTING
document_data = S_maildata
DOCUMENT_TYPE = 'RAW'
PUT_IN_OUTBOX = ' '
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL =
NEW_OBJECT_ID =
tables
OBJECT_HEADER = IT_MAILTXT1
OBJECT_CONTENT = IT_MAILTXT2
CONTENTS_HEX =
OBJECT_PARA =
OBJECT_PARB =
receivers = IT_MAILREC
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8
IF sy-subrc = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. "document_details
After I pressed the exit button the program is getting terminated but still this mail is comming to sost transaction code.
If I will comment the message code which is after sy-subrc the popup will not come and program will work without any interruption.
Can anybody please solve this problem?Resolved
-
I can't bring up my contact list when sending E mails, says error code
At times I can't bring up my contact list when sending E mail. It says contact list error code. I can bring up my contact list when I use internet explorer. Sometimes fire fox crashes for no apparent reason ....
Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39] -
I am using the most recent version of Adobe reader, have uninstalled and reinstalled multiple times to no avail.
How To Change the Authorized Adobe ID
http://www.adobe.com/go/digital-editions-createID
What do you do if your copy of Adobe Digital Editions is authorized with the wrong Adobe ID? This can happen if you’ve started using a different Adobe ID or you somehow messed up the authorization in the past.
If you’re trying to open an ebook when Adobe Digital Editions is authorized with the wrong Adobe ID, you’ll get an error message like: “License fulfilled by a different user” or something similar referencing licensing or authorization.
Important note: If you have some ebooks that do require your current authorization, those will become unreadable if you authorize with a different Adobe ID.
deauthorize
The first thing to do is deauthorize Adobe Digital Editions. This will remove your current authorization.
1. Open Adobe Digital Editions
2. On your keyboard, simultaneously press the Ctrl, Shift, and D buttons (if on Windows) or the Cmd, Shift, and D buttons (if on a Mac)
3. Click the “Deauthorize” button
After this you should close Adobe Digital Editions, and then open it again.
re-authorize
If you’ve followed the steps above, your copy of Adobe Digital Editions is no longer authorized.
Open Adobe Digital Editions
Adobe Digital Editions will behave as if you’ve just installed it, and will prompt you to enter your login information for your Adobe ID. Use the Adobe ID account information that you want to use to authorize Adobe Digital Editions. -
Hi All,
I am using project server 2007 and WSS 3.0.
I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
Everything is correct whether it is URL or MS Project profile account on MSP. This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
When i try to connect to MSP on App server, i get the following errors in event viewer.
Event Type: Error
Event Source: MSSOAP
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Connection time out..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: An unanticipated error occurred during the processing of this request..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description: Soap error: Sending the Soap message failed or no recognizable response was received.
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Unspecified client error..
One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
sandeepHi Paul ,
Thanks for reply. The project server URL was already added to the Trusted
Sites/Local Intranet areas in IE.
sandeep -
trying to send e-mail and error message " a copy has been placed in your outbox. the sender address was rejected by the server"
i have the same problem with my 3gs and tried to add my email acc+pass in the outgoing server but it got rejected.
just bin on the phone(45min) with my carrier support about this issue they are pretty much scratching there head, the settings i should use gets verified with no problems when i add the outgoung server, but still cant send mails. -
I tried to send a mail message to too many addees. when the rejection came back "cannot send message using the server..." the window is too long to be able to see the choices at the bottom of it. how can I see the choices at the bottom of that window?
I tried to send it through gmail and the acct is a POP acct
I'm not concerned about sending to the long address list. I just can't get the email and window that says "cannot send emai using the server..." to go away. The default must be "retry", because although I cannot see the choices at the bottom of the window if I hit return it trys again... and then of course comes back with the very long pop up window that I cannot see the bottom of so I can tell it to quit trying... -
"Failed to Send the HTTP Message..." - HTTPSupport problem
Hello,
We're having a few difficulties when the HTTPServer in UDS5.0.3 running on Solaris 8. Basically, we have a pair of MS .NET servers using some XML Webservices that we reside on the UDS server.
The symptoms of the problem are that a lot of "Failed to send the HTTP message..." messages are being seen in the log for the partition that contains instances of the HTTPServer. The reason given is a UsageException on the ExternalConnection - stating that the "Object is not open for I/O so it cannot be read or written" (ExternalConnection::Write at 1). This only occurs when a HTTP Response is to be sent back to the .NET server.
Unfortunately, this exception appears to be occurring somewhere within the code held in the HTTPSupport library, so we can't easily trace the error. Worse still, we don't actually know what's causing the error.
Does the error indicate a problem with comms between our UDS HTTPServer and the .NET servers? We've also noticed a large number of socket connections being left in a state of CLOSE_WAIT when this error occurs (which eventually block the port altogether resulting in the HTTPServer instances becoming unresponsive).
As far as I can tell, the Solaris TCP/IP settings are all at the OS default.
Many thanks for any assistance,
Jason Bridgen.Hi Gordon,
The problem was solved, the customer changed his ip adress on the server and it's OK now!
Thank you !!
Hilla. -
When MAIL adapter failed to send the mail to recever, how does it handle XI
Hi Experts,
I used dynamic mail adapter, how do we track whether the mail has been successfully received by receiver, if it is failed to send the mail by mail adapter how do we handle in XI. Please help me out.
thanks
sivaSiva:
There is one option in Mail Adapter (Receiver) "Send Delivery Status Notification". I think, it will help you to get the status. When you fill the above option, you are required to fill a recipient email id to whom, the status of the email will be emailed. From there, you can get the status. Please dig little more into this.
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm -
For the past 2 days Airport Extreme works for about 5 minutes and then will not receive or send e-mail messages, or let Safari work. The only way I can send or receive is to unplug Airport Extreme for a few seconds, reconnect and then work frantically for 5 minutes before it does the same thing. The green light stays on and the diagnostics tells me nothing is wrong even though no mail is moving.
Any ideas?
Thanks,
Greg
(I plugged my laptop directly into the modem in order to send this message.)For the past 2 days Airport Extreme works for about 5 minutes and then will not receive or send e-mail messages, or let Safari work. The only way I can send or receive is to unplug Airport Extreme for a few seconds, reconnect and then work frantically for 5 minutes before it does the same thing. The green light stays on and the diagnostics tells me nothing is wrong even though no mail is moving.
Any ideas?
Thanks,
Greg
(I plugged my laptop directly into the modem in order to send this message.) -
My mac mail on just keeps sending the same messages even after deleted and shows thousands of emails supposed to be coming in
If you have a backup, you can restore the e-mails. Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Library/Mail/V2.
Thanks to leonie for some information contained in this. -
How to send the same message to two SMTP servers
hi,
I need to send a message to two different SMTP servers.
I want to avoid the creation of new MimeMessage with a new Session.
the only way I've found was to keep a reference to the Properties instance that was used in the Session creation, and modify its "mail.smtp.host" property.
Is there another way? I must be missing something.
thanks,
oferhi,
I've already found the solution, so I'll post it here.
first I'll explain the purpose:
I needed to send the same message to a normal email server, and (for some of the recipients) to a special SMTP server that is on a different machine.
the following code demonstrate the solution.
thanks for your help.
ofer
----------code---------------
public class MultipleSendTest {
private final static Session server1 = createSession("somesmtp_server.com");
private final static Session _server2 = createSession("another_smtp_server.com");
public static void main(String args[]) throws Exception {
//create the message
MimeMessage m = new MimeMessage(_server1);
m.setText("body text");
m.addRecipients(Message.RecipientType.TO, "[email protected]");
m.setFrom(new InternetAddress("[email protected]"));
//send
send(m, _server1);
send(m, _server2);
private static void send(MimeMessage message, Session session) {
//for logging only
String host = session.getProperty("mail.smtp.host");
try {
Transport transport = session.getTransport("smtp");
transport.connect();
transport.sendMessage(message, message.getAllRecipients());
System.out.println("sent to " + host);
transport.close();
} catch (MessagingException e) {
System.out.println("failed to send to " + host);
private static Session createSession(String host) {
Properties properties = new Properties();
properties.setProperty("mail.smtp.host", host);
return Session.getInstance(properties);
----------code---------------
Maybe you are looking for
-
HT202023 I am unable to make in app purchase with my valid credit card on my account.
un able to make in app purchases after having a valid credit card placed on my a point. I can make 1-2 purchases before I can't do it any longer. Why is this the case?
-
Master/Detail - master in table,details in pop-up per row, commit all at 1
Somewhat similar to the table as master with a clickable row to another page w/ the details, I'm trying the following: Master (Parent) - View Object based on multitable view, therefore, not updateable. This is presented in a table control. Column pus
-
Can I find out what (if any) pantone colors were used when creating a PDF I received (Pro X)?
I am being asked to get a quote for a piece that looks to be two color but all I have is what they are telling me is the print ready PDF and they don't know how it was built. I have tried properties, prepare for..., etc and I can't find anything tha
-
How do I delay sending an email in Mac OS X Lion Mountain?
I am VERY new to using a Mac and want to do what I can do in Outlook. However I cannot find an option to delay the sending of an email. Can anyone help? I have spent about 30 mins googling this and I read alot about scripts? Am I meant to write a pro
-
Can I transfer movies from my MacBook to my iPod touch 5th gen?
Can I transfer movies from my MacBook to my iPod Touch 5th gen?