"Failed to Send the HTTP Message..." - HTTPSupport problem
Hello,
We're having a few difficulties when the HTTPServer in UDS5.0.3 running on Solaris 8. Basically, we have a pair of MS .NET servers using some XML Webservices that we reside on the UDS server.
The symptoms of the problem are that a lot of "Failed to send the HTTP message..." messages are being seen in the log for the partition that contains instances of the HTTPServer. The reason given is a UsageException on the ExternalConnection - stating that the "Object is not open for I/O so it cannot be read or written" (ExternalConnection::Write at 1). This only occurs when a HTTP Response is to be sent back to the .NET server.
Unfortunately, this exception appears to be occurring somewhere within the code held in the HTTPSupport library, so we can't easily trace the error. Worse still, we don't actually know what's causing the error.
Does the error indicate a problem with comms between our UDS HTTPServer and the .NET servers? We've also noticed a large number of socket connections being left in a state of CLOSE_WAIT when this error occurs (which eventually block the port altogether resulting in the HTTPServer instances becoming unresponsive).
As far as I can tell, the Solaris TCP/IP settings are all at the OS default.
Many thanks for any assistance,
Jason Bridgen.
Hi Gordon,
The problem was solved, the customer changed his ip adress on the server and it's OK now!
Thank you !!
Hilla.
Similar Messages
-
Failed to send the mail message error code: -49
Hi,
When sending mail outside the company (outside the domain), getting this error: Failed to send the mail message error code: -49
When sending mail internally (within the domain) successfully submitted.
I was looking for notes relating to the subject but could not find anything that helped me
I would appreciate your help,
HillaHi Gordon,
The problem was solved, the customer changed his ip adress on the server and it's OK now!
Thank you !!
Hilla. -
EmailMsg::Send::Failed to send the mail message error code: -49
can enyone explain me this error.
I want to send emails via IIS.
i've tested SBO Mailer to connect to IIS. TEST is succesfull.
SAP 2007 PL8The sending user must have an email address set up in their user record (Administration>set up>general> users). Check this first, then, do a search in the SAP notes on error 49, you should find at least two notes for troubleshooting this eror message
-
Hi All,
I am using project server 2007 and WSS 3.0.
I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
Everything is correct whether it is URL or MS Project profile account on MSP. This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
When i try to connect to MSP on App server, i get the following errors in event viewer.
Event Type: Error
Event Source: MSSOAP
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Connection time out..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: An unanticipated error occurred during the processing of this request..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description: Soap error: Sending the Soap message failed or no recognizable response was received.
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Unspecified client error..
One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
sandeepHi Paul ,
Thanks for reply. The project server URL was already added to the Trusted
Sites/Local Intranet areas in IE.
sandeep -
Hi all,
I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
<snip>
11/05/14 08:50:48:184 | [INFO] | | | | | | | 5236 | **File download complete.**
11/05/14 08:50:52:145 | [INFO] | | | | | | | 3732 | **File download complete.**
11/05/14 08:51:05:327 | [INFO] | | | | | | | 1784 | **File download complete.**
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | The windows error code is - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | Failed to send the request to server to get the response - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
11/05/14 08:51:06:992 | [INFO] | | | | | | | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:51:11:514 | [INFO] | | | | | | | 6844 | incrementing the thread. now the active thread count is 2
11/05/14 08:51:12:519 | [INFO] | | | | | | | 6648 | **File download complete.**
11/05/14 08:51:16:541 | [INFO] | | | | | | | 6844 | decrementing the thread count. now the active thread count is 1
11/05/14 08:51:22:281 | [INFO] | | | | | | | 3452 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:51:29:022 | [INFO] | | | | | | | 1836 | **File download complete.**
11/05/14 08:52:22:381 | [INFO] | | | | | | | 7220 | incrementing the thread. now the active thread count is 2
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | The windows error code is - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | Failed to send the request to server to get the response - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
11/05/14 08:52:27:383 | [INFO] | | | | | | | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:52:27:663 | [INFO] | | | | | | | 4908 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:52:28:733 | [INFO] | | | | | | | 6064 | **File download complete.**
11/05/14 08:52:42:810 | [INFO] | | | | | | | 7220 | **File download complete.**
11/05/14 08:52:45:570 | [INFO] | | | | | | | 3788 | **File download complete.**
</snip>
There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0.Hi all,
I am able to install the Windows Adobe Creative Cloud application fine on Windows 7 box but the application fails to establish a connection with Adobe server/-s.
We use a proxy with Websense as our network security solution. Proxy configuration script is set in Internet Options. We have not tried to whitelist anything as per http://helpx.adobe.com/creative-cloud/kb/proxy-authentication-support-creative-cloud.html as the errors suggest the application does not even connect to the proxy server/Websense at all.
Please see below snippet from that DLM.log file that contains the error messages - please have a look. Could anybody tell me what it means or advise how to resolve this please? I don't see the Adobe Creative Cloud tool to have any options where manual proxy settings can be setup to try that.
<snip>
11/05/14 08:50:48:184 | [INFO] | | | | | | | 5236 | **File download complete.**
11/05/14 08:50:52:145 | [INFO] | | | | | | | 3732 | **File download complete.**
11/05/14 08:51:05:327 | [INFO] | | | | | | | 1784 | **File download complete.**
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | The windows error code is - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | Failed to send the request to server to get the response - 12002
11/05/14 08:51:06:968 | [ERROR] | | | | | | | 3452 | the download job (0) failed to execute. The job state is STOPPED_STATE
11/05/14 08:51:06:992 | [INFO] | | | | | | | 6844 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:51:11:514 | [INFO] | | | | | | | 6844 | incrementing the thread. now the active thread count is 2
11/05/14 08:51:12:519 | [INFO] | | | | | | | 6648 | **File download complete.**
11/05/14 08:51:16:541 | [INFO] | | | | | | | 6844 | decrementing the thread count. now the active thread count is 1
11/05/14 08:51:22:281 | [INFO] | | | | | | | 3452 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:51:29:022 | [INFO] | | | | | | | 1836 | **File download complete.**
11/05/14 08:52:22:381 | [INFO] | | | | | | | 7220 | incrementing the thread. now the active thread count is 2
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | The windows error code is - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | Failed to send the request to server to get the response - 12002
11/05/14 08:52:26:971 | [ERROR] | | | | | | | 6756 | the download job (5) failed to execute. The job state is STOPPED_STATE
11/05/14 08:52:27:383 | [INFO] | | | | | | | 7220 | some intermittent error. Retrying now. Error code is 12002 and error type is -45
11/05/14 08:52:27:663 | [INFO] | | | | | | | 4908 | resetting intermitent error 9 from to 1 to 0
11/05/14 08:52:28:733 | [INFO] | | | | | | | 6064 | **File download complete.**
11/05/14 08:52:42:810 | [INFO] | | | | | | | 7220 | **File download complete.**
11/05/14 08:52:45:570 | [INFO] | | | | | | | 3788 | **File download complete.**
</snip>
There is also an INFO class message that talks about resetting an ‘error 9’ from 1 to 0. -
Sending the fault message payload to sender using BPM.
I have the scenario where BPM splits a file into multiple record and each record calls webservice.
For a successfull call a success response is generated by web service . For a failed transaction a fault message is sent back which needs to be delivered to the sender's mail ID.
I am not able send the fault message payload which contains the error message details to sender ..
Please suggest what can be done for such a scenario. Is there any way by which error details can be sent to sender?
Edited by: trisha.b on Nov 28, 2010 7:23 PM
Edited by: trisha.b on Nov 28, 2010 7:29 PMHi,
Check the blog http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22017.. [original link is broken] [original link is broken] [original link is broken]
You can handle the exception on your web service and model a Notification task so that you can send e-mail notification to the sender in case of exception
Regards, Anil -
RegTask: Failed to send registration request message. Error: 0x80040231
Hi,
i am getting the below error ClientIDManager.log
RegTask: Failed to send registration request message. Error: 0x80040231
RegTask: Failed to send registration request. Error: 0x80040231
Error initializing client registration (0x80040222).
Please let me know how can i solve the error.
Regards,
BoopathiChecked this ?
http://social.technet.microsoft.com/Forums/systemcenter/en-US/235b795b-442d-4d72-aff0-642d3714ee48/sccm-2007-sp2-mixed-mode-failed-to-send-reqistration-request-message-080040231
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread. -
Failed to send the form to recipients
When I try to distribute a newly created form to a single recipient (as a test) I get error message "Failed to send the form to recipients. Form distribution is aborted." Any ideas on why this is occurring and what I can do to fix it.
Thanks for any help you can provide.I had the same problem. Took a while
to find the Distribute Form Tab that contains the "R
emember my settings" switch. Unchecked the switch and successfully distributed form using e-mail. Thanks for the tip! -
Correct and re-send the error messages in PI
Hi everyone,
Today when iam monitoring my PI i found error like some objects missing in the que, I toublshooted it by using inbount xml payload and found the error and cunsulted the user he asked me to correct and re-send the error messages. as iam really new to PI monitoring i really dont know how to correct and re-send the error messages in PI, can any one please help me with it.
Thanks in advanceWhen you send the messages from RWB-->Component Monitoring ->Integration Engine>test message, runtime parameters like Sender System, Receiver system, Adapter specific message attributes won't carry any values. If you are using any of these paramters in the mapping step,, the mapping will fail.
I think in your case, RFC look up would have been configured based on Sender Business system/Service. but when you send message from RWB, the value for this field is empty. So that is why it is failing as the message cannot find the business system and communication channel.
If you use the sender file name, server name or any other parameters in the message mapping, then message will fail in the message mapping step. That is the major set back in RWB-->Test message.
Reasons:
1)We post messages directly into pipeline step message mapping.
2)The previous pipeline steps are ignored when post messages from RWB such as Receiver determination, routing etc
3)Receiver determination step is responsible to send Sender/Receiver values into the mapping step.
Hope i have clarified your questions -
How to send the same message to two SMTP servers
hi,
I need to send a message to two different SMTP servers.
I want to avoid the creation of new MimeMessage with a new Session.
the only way I've found was to keep a reference to the Properties instance that was used in the Session creation, and modify its "mail.smtp.host" property.
Is there another way? I must be missing something.
thanks,
oferhi,
I've already found the solution, so I'll post it here.
first I'll explain the purpose:
I needed to send the same message to a normal email server, and (for some of the recipients) to a special SMTP server that is on a different machine.
the following code demonstrate the solution.
thanks for your help.
ofer
----------code---------------
public class MultipleSendTest {
private final static Session server1 = createSession("somesmtp_server.com");
private final static Session _server2 = createSession("another_smtp_server.com");
public static void main(String args[]) throws Exception {
//create the message
MimeMessage m = new MimeMessage(_server1);
m.setText("body text");
m.addRecipients(Message.RecipientType.TO, "[email protected]");
m.setFrom(new InternetAddress("[email protected]"));
//send
send(m, _server1);
send(m, _server2);
private static void send(MimeMessage message, Session session) {
//for logging only
String host = session.getProperty("mail.smtp.host");
try {
Transport transport = session.getTransport("smtp");
transport.connect();
transport.sendMessage(message, message.getAllRecipients());
System.out.println("sent to " + host);
transport.close();
} catch (MessagingException e) {
System.out.println("failed to send to " + host);
private static Session createSession(String host) {
Properties properties = new Properties();
properties.setProperty("mail.smtp.host", host);
return Session.getInstance(properties);
----------code--------------- -
When MAIL adapter failed to send the mail to recever, how does it handle XI
Hi Experts,
I used dynamic mail adapter, how do we track whether the mail has been successfully received by receiver, if it is failed to send the mail by mail adapter how do we handle in XI. Please help me out.
thanks
sivaSiva:
There is one option in Mail Adapter (Receiver) "Send Delivery Status Notification". I think, it will help you to get the status. When you fill the above option, you are required to fill a recipient email id to whom, the status of the email will be emailed. From there, you can get the status. Please dig little more into this.
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm -
Shortly after launching itunes, the program freezes and gives me the following message:A problem has caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. The program then closes, even if I have not completed what I am doing. How do I resolve this problem?
That is what I thought. Cannot figure out how to turn it off, though.
However, when I talked to her over the phone, she is definitely using Firefox. I tried to access her Internet Explorer, but it has been deactivated, I believe by Firefox.
She primarily uses the Internet to communicate with her kids, grandkids, and great grandkids. Her e-mail account is with Yahoo Mail, and she uses Firefox to access it. Occasionally, she uses the web to look up information, and may have downloaded a virus.
Do you think there's something in Yahoo Mail that conflicts with Firefox? Is there some remnant of Internet Explorer that needs to be deactivated? Could she have a virus?
Any information would be gratefully appreciated. I live 7 hours away, and can only help her over the phone. I'm trying to develop a course of action that I can use with her. I know a little bit about Firefox, so need your expertise. -
Can we send the same message two different recievers with sequence
Hi,
i am sending the same message to two different receviers without using BPM.
now i require to send with sequence.is it possible without BPM?Hey
There are two options for this
First one is to use Wait step in BPM as other experts suggested.
Second one is a dirty way around,what you can do is send the second message to a dummy receiver first(may be a file on your XI server),then design one bypass scenario which will pick up the file after a specified time interval(give the poling interval you want).
i would go for BPM coz its pretty straight forward,but in case you want to avoid BPM then u can use the second approach
for bypass scenario,have a look at the following
How to send any data (even binary) through XI, without using the Integration Repository -
Send the same message to two receivers with some time difference..
Hi
I want to send the same message to Two receivers with the slight time difference.. becuase but not at the same time.. if the same time means.. just we can specify the two receivers in the one receiver determination..
but if i want to send the same message to Two reveivers with the time difference means..(after sending the message to first receiver.. after some time gap.. i need to send the message to second receiver..
this type of scenarios how can we do.. is it possible to do with out BPM... please suggest me the solution..
Thanks
Jain .PHi Jain,
With BPM you can easily do it.
i am giving you the steps:
1)first add a receive strep to get your message
2)then, put a receiver determination step with a multiline receiver container element assigned to its Receivers property.
3)then, put a block in dynamic mode(ie. ForEach/ParForEach mode) and assign the multiline receiver container element to its multiline element and assign a simple(single line) receiver container element to its current line property.
4) add a send step within the block, choose Receivers List in its Receiver From property and choose the current line receiver element in its Receivers property.
5) then add a wait step in the BPM, in its type select Wait Specified Time Period and then mention the duration in your desired time unit.
**Reward points if helpful...
--Sankar Choudhury -
Report Generator has failed, please send the following information to your
Hi I am trying to generate a report from Designer. I am getting the following error
Report Generator has failed, please send the following information to your support person
Assertion failure at crrma_bld_orapp at crrm.cpp:459
What should I do to get a report from Designer.
Thanks in advance,
Archnadanie,
please contact oracle support. this will most likely go beyond the scope of what we can do here in the forum.
thanks,
ph.
Maybe you are looking for
-
Not sure if my Macbook pro can run Starcraft II...help?
I got a Macbook Pro for college and, being the only computer that I own, I'm not sure if its capable of running Starcraft II. Here are my specs: -2.7 GHz Intel Core i7 -4GB 1333 MHz DDR3 -Intel HD 3000 384 MB -OS X Lion 10.7.4 I believe thats all the
-
Slide Audio plays twice, almost like an echo.
Hopefully this is not weird and there's a quick fix, but basically, for a couple of my slides, the audio almost has like an echo. It's not the audio file iteslf, I've tested it many times. It seems as if there's a duplicate audio file playing about a
-
Apostrophes dropped when flattening pdf's?
I'm using OS X 10.4.11, InDesign 4 and have tried on both Acrobat 8 and 9. I'll make a page for a newspaper my company publishes in InDesign 4 and export it as a press quality PDF. Because of our CTP system to go to press the pages must be flattened.
-
Regarding Upgrading Leopard to Snow Leopard
Im just curious since I still use Adobe CS2 and CS3 applications (sort of out of my price range right now to upgrade anyways) and using Office 2008; will Snow Leopard do away with those programs? I think they run under rosetta? or should they still b
-
I just set up my new HP Photosmart 6520. For some reason the top part of the paper tray seems to be misaligned. I'll try to describe it. The bottom portion, where the plain paper and photo paper are stored seems to be fine although at first it wou