Embed code - jscript error

I have used some embed code in a jscript file that someone
was nice enough to stuff - see attached to overcome the "click on
object to acvtivate" so that my .swf plays without having to click
it twice. This works well except I am getting conflicts with other
things e.g. if windows media player plays, I now possibly get a
skype IE plugin error jscript.dll error. Not sure if this is
related but wanted to check if any one else come across this
problem. Thanks.

The ampersand (&) is a special character in XML (and thus also XHTML). It represents the start of an entity which usually ends with semicolon (;). In your case you rather wanted to show the ampersand as-is. You need to represent it as an entity then: &.

Similar Messages

How to embed Vimeo Video (URL/embed code) to InDesign interactiv PDF (A4 Format)?

Hi there, I am looking for a way to embed a vimeo.com Video into my C.V.
I copied the embed code on the vimeo site and pasted it into my InDesign document and added the "http:" in the HTML code. When I select the object and click on the Folio Overlay panel to Preview on Desktop I get the following Error:
"The page size aspect ratio must match the folio aspect ratio."
I triied resizing the frame of the pasted embed code to the page size of my PDF and resized the object itself within the frames to the page width afterwards but nothing stopped InDesign from givin me this error message.
I am using CS 6 and I cannot place the video file in the indesign document itself for pdf file size reasons as u might understand.
What am I doing wrong? Can I even use the DPS tools to embed a vimeo video to my A4 PDF at all? Is there a different way to embed the vimeo link? (I don't want to upload my video as an swf file on a server and link to it for several reasons, but if there is no other solution I will go for that.)
Please help!
Johnny

I am triing to create an interactive A4 PDF document. Which I then wanna send to companies as my job application via email. I want it to be an interactive pdf because there are hyperlinks on the first page and because of the vimeo link but I also want it to be A4 because it is the formal regulation for a job application in my country.

JScript error in Application integrated by URL iView

Hi All,
I've got a problem with integrating an application in the portal by using an URL iView in popup-mode. When opened, a Javascript error is shown indicating that a certain object under "parent." can't be accessed by the application. I suspect that is because the portal doesn't really open a blank popup window but adds its own code on top of the page. Unfortunately we can't alter the code since it's a third party application.
The iView is set to "display in separate window" (= popup) and I played around with every single option in the "Web Page Area" category - and most of the other options available in the iView editor that seemed to make sense.
When clicking "preview" in the iView editor the application always works perfectly in the popup that appears. But I can see from the looks of the URL that the application is called in a different way when clicking "preview". It's not a portal URL then - it's being called directly.
Is there any way to create an URL iView that simply opens an URL as a popup without any portal frames or portal code added - just like the "preview" button does?
Thanks a lot,
Jens

Hi Daniel,
first of all thanks a lot for trying to recreate my scenario.
I created a test role and added cnn.com as an URL iView just so that we are both talking about the same thing. No problem there - the portal redirects and the URL reads "cnn.com".
I did the same with our application in question (all iView options to default except for "Open in New Window"). There it doesn't work, the site just loads partially and then stops due to a JScript error. Again, not so if I just click "Preview" in the iView editor.
We're on 2004s SP9
Here's what I think happens:
When I navigate to "View --> Source" in Internet Explorer (be it CNN or be it our application) there's a lot of portal code with an IFRAME at the bottom:
<IFRAME src='http://myapplication.company.com/' frameBorder=0 style='WIDTH:100%' height='100%' id='isolatedWorkArea' name='isolatedWorkArea'></IFRAME>
CNN doesn't mind but it seems that the JS-programming of our application gets confused because the application is not the topmost element in the DOM hierarchy (instead it's just inside a full size IFRAME surrounded by an invisible portal page).
Is there any way to get rid of this code? As I said, I already tried the various iView-options...
Thanks a lot,
Jens

ADF Mobile: Code Signing Error Workaround

Hi, everyone:
If you are doing ADF Mobile development, and you need to deploy the application to an iOS device, you would need to compile/deploy the app with iOS App Certificates and Provisioning Profile. This means you would need to "Deploy to Package" or "Deploy to iTunes" during deployment, and configure JDeveloper with the proper certificates/profiles. In some instances (exact combination is still not clear), deploy and signing the application to generate the ipa file may fail with similar error message at the end of the deployment log:
[01:04:45 PM] Deployment failed due to one or more errors returned by '/usr/bin/xcrun'. The following is a summary of the returned error(s): Command-line execution failed (Return code: 1) error: /usr/bin/codesign force preserve-metadata=identifier,entitlements,resource-rules sign iPhone Distribution: Oracle Corporation resource-rules=/var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app/ResourceRules.plist --entitlements /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/entitlements_plistEINPBkIG /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app failed with error 1. Output: /var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app: replacing existing signature Program /usr/bin/codesign returned 1 : [/var/folders/x7/21sjrpx13qj9tq20z14s3j_w0000gn/T/tkROhP11qU/Payload/HelloWorld.app: replacing existing signature
This issue is a known issue and is not related to ADF Mobile. The workaround is discussed in this article:
http://stackoverflow.com/questions/7425840/that-codesign-returned-1-object-ifile-format-invalid-or-unsuitable-problem-aga
This article refers to the old location of Xcode, so you would need to adjust the paths accordingly. The path for Xcode 4.3 and above would be like:
/Applications/Xcode.app/Contents//Developer/Platforms/iPhoneOS.platform/Developer/usr/bin/PackageApplication to this script file.
To modify it, you probably can’t use TextEdit. I end up opening a terminal session, changed the file permission, and used vi to update it.
This fixed the issue I was having.
Hope this is helpful - please drop a reply if you encountered the same issue.
Thanks,
Joe Huang

I ran the entire code and the output is:
[02:40:18 PM] Updating iOS profile dependencies with FAR profiles created from application projects...
[02:40:18 PM] ---- Deployment started. ----
[02:40:18 PM] Target platform is (iOS).
[02:40:18 PM] Beginning deployment of ADF Mobile application 'Application1' to iOS using profile 'IOS_MOBILE_Application1'.
[02:40:18 PM] Command-line executed: [Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/xcodebuild, -version]
[02:40:18 PM] Command-line execution succeeded.
[02:40:18 PM] Running dependency analysis...
[02:40:18 PM] Building...
[02:40:18 PM] Deploying 3 profiles...
[02:40:18 PM] Wrote Archive Module to /java/development/JDev11gBuild6276.1Sandpit/Application1/ApplicationController/deploy/ApplicationController.jar
[02:40:18 PM] WARNING: No Resource Catalog enabled ADF components found to package
[02:40:18 PM] Wrote Archive Module to /java/development/JDev11gBuild6276.1Sandpit/Application1/ViewController/deploy/ViewController.jar
[02:40:18 PM] Verifying Application Controller project exists...
[02:40:18 PM] Verifying application dependencies...
[02:40:18 PM] Validating application XML files...
[02:40:18 PM] Validating XML files in project ApplicationController...
[02:40:18 PM] Validating XML files in project ViewController...
[02:40:18 PM] Copying common javascript files...
[02:40:21 PM] Copying FARs to the ADF Mobile Framework application...
[02:40:21 PM] Copying FAR from source: ViewController...
[02:40:21 PM] Copying FAR from source: ApplicationController...
[02:40:21 PM] Deploying skinning files...
[02:40:21 PM] Copying the CVM SDK files built for the ARM processor...
[02:40:21 PM] Copying the CVM JDK files built for the ARM processor...
[02:40:21 PM] Command-line executed: [cp, -R, -p, /java/jdeveloper/JDev11gBuild6276.1/jdeveloper/jdev/extensions/oracle.adf.mobile/iOS/jvmti/arm/, /java/development/JDev11gBuild6276.1Sandpit/Application1/deploy/IOS_MOBILE_Application1/temporary_xcode_project/lib]
[02:40:21 PM] Command-line execution succeeded.
[02:40:21 PM] Command-line executed: [cp, -R, -p, /java/jdeveloper/JDev11gBuild6276.1/jdeveloper/jdev/extensions/oracle.adf.mobile/iOS/jvmti/jar/, /java/development/JDev11gBuild6276.1Sandpit/Application1/deploy/IOS_MOBILE_Application1/temporary_xcode_project/lib]
[02:40:21 PM] Command-line execution succeeded.
[02:40:21 PM] Copying security related files to the ADF Mobile Framework application...
[02:40:22 PM] Command-line executed from path: /java/development/JDev11gBuild6276.1Sandpit/Application1/deploy/IOS_MOBILE_Application1/temporary_xcode_project/
[02:40:22 PM] Command-line executed: /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/xcodebuild clean install -configuration Debug -sdk iphoneos DSTROOT=/java/development/JDev11gBuild6276.1Sandpit/Application1/deploy/IOS_MOBILE_Application1/Destination_Root/ ARCHS=armv7 VALID_ARCHS=armv7 ONLY_ACTIVE_ARCHS=NO CODE_SIGN_IDENTITY=iPhone Developer: Eddie V Phan (QV69QS58FK) IPHONEOS_DEPLOYMENT_TARGET=5.0 TARGETED_DEVICE_FAMILY=1,2 PRODUCT_NAME=Application1 ADD_SETTINGS_BUNDLE=NO
[02:40:30 PM] ld: warning: PIE disabled. Absolute addressing (perhaps -mdynamic-no-pic) not allowed in code signed PIE, but used in CVMmemoryBarrier from Frameworks/OracleCVM.sdk/libcvmadf_arm_debug.a(atomic_arm.o). To fix this warning, don't compile with -mdynamic-no-pic or link with -Wl,-no_pie
[02:40:30 PM] Command-line execution succeeded.
[02:40:30 PM] Command-line executed from path: /java/development/JDev11gBuild6276.1Sandpit/Application1/deploy/IOS_MOBILE_Application1/Destination_Root/Oracle_ADFmc_Container_Application/device/
[02:40:30 PM] Command-line executed: /usr/bin/xcrun -sdk iphoneos PackageApplication -v /java/development/JDev11gBuild6276.1Sandpit/Application1/deploy/IOS_MOBILE_Application1/Destination_Root/Applications/Application1.app -o /java/development/JDev11gBuild6276.1Sandpit/Application1/deploy/IOS_MOBILE_Application1/Destination_Root/Oracle_ADFmc_Container_Application/device/Application1.ipa sign iPhone Developer: Eddie V Phan (QV69QS58FK) embed /developement/iOS_Provisioning_Profile/devTest.mobileprovision
[02:40:31 PM] error: /usr/bin/codesign force preserve-metadata=identifier,entitlements,resource-rules sign iPhone Developer: Eddie V Phan (QV69QS58FK) resource-rules=/var/folders/zm/pnmpplxs2rb7_n29ltfkvpzc0000gn/T/YPzy7_Hf6L/Payload/Application1.app/ResourceRules.plist /var/folders/zm/pnmpplxs2rb7_n29ltfkvpzc0000gn/T/YPzy7_Hf6L/Payload/Application1.app failed with error 1. Output: /var/folders/zm/pnmpplxs2rb7_n29ltfkvpzc0000gn/T/YPzy7_Hf6L/Payload/Application1.app: replacing existing signature
[02:40:31 PM] Program /usr/bin/codesign returned 1 : [/var/folders/zm/pnmpplxs2rb7_n29ltfkvpzc0000gn/T/YPzy7_Hf6L/Payload/Application1.app: replacing existing signature
[02:40:31 PM] Command-line execution failed (Return code: 1)
[02:40:31 PM] Deployment cancelled.
[02:40:31 PM] ---- Deployment incomplete ----.
[02:40:31 PM] Failed to package the XCode application.
[02:40:31 PM] Failed to build the iOS application bundle.
[02:40:31 PM] Deployment failed due to one or more errors returned by '/usr/bin/xcrun'. The following is a summary of the returned error(s):
Command-line execution failed (Return code: 1)
error: /usr/bin/codesign force preserve-metadata=identifier,entitlements,resource-rules sign iPhone Developer: Eddie V Phan (QV69QS58FK) resource-rules=/var/folders/zm/pnmpplxs2rb7_n29ltfkvpzc0000gn/T/YPzy7_Hf6L/Payload/Application1.app/ResourceRules.plist /var/folders/zm/pnmpplxs2rb7_n29ltfkvpzc0000gn/T/YPzy7_Hf6L/Payload/Application1.app failed with error 1. Output: /var/folders/zm/pnmpplxs2rb7_n29ltfkvpzc0000gn/T/YPzy7_Hf6L/Payload/Application1.app: replacing existing signature
Program /usr/bin/codesign returned 1 : [/var/folders/zm/pnmpplxs2rb7_n29ltfkvpzc0000gn/T/YPzy7_Hf6L/Payload/Application1.app: replacing existing signature
What do you mean by "the "-sign" parameter values look dubious (besides your name :-P), how can it interpret those spaces?"
The sign parameter that i'm using is from the KeyChain app, so i'm assuming in the preferences where it asks for the Certificate, that its asking for the certificate name in KeyChain? When trying to escape the spaces in the Preferences menu, it complains that the certificate names do not match.. Or am i meant to be using another parameter here..?
[02:34:07 PM] Command-line executed from path: /java/development/JDev11gBuild6276.1Sandpit/Application1/deploy/IOS_MOBILE_Application1/temporary_xcode_project/
[02:34:07 PM] Command-line executed: /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/xcodebuild clean install -configuration Debug -sdk iphoneos DSTROOT=/java/development/JDev11gBuild6276.1Sandpit/Application1/deploy/IOS_MOBILE_Application1/Destination_Root/ ARCHS=armv7 VALID_ARCHS=armv7 ONLY_ACTIVE_ARCHS=NO CODE_SIGN_IDENTITY=iPhone\ Developer:\ Eddie\ V\ Phan\ $QV69QS58FK$ IPHONEOS_DEPLOYMENT_TARGET=5.0 TARGETED_DEVICE_FAMILY=1,2 PRODUCT_NAME=Application1 ADD_SETTINGS_BUNDLE=NO
[02:34:09 PM] [BEROR]Code Sign error: The identity 'iPhone\ Developer:\ Eddie\ V\ Phan\ $QV69QS58FK$' doesn't match any valid, non-expired certificate/private key pair in your keychains
[02:34:09 PM] Code Sign error: The identity 'iPhone\ Developer:\ Eddie\ V\ Phan\ $QV69QS58FK$' doesn't match any valid, non-expired certificate/private key pair in your keychains
[02:34:09 PM] Command-line execution failed (Return code: 65)
[02:34:09 PM] Deployment cancelled.
[02:34:09 PM] ---- Deployment incomplete ----.
[02:34:09 PM] Failed to build the iOS application bundle.
[02:34:09 PM] Deployment failed due to one or more errors returned by '/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/xcodebuild'. The following is a summary of the returned error(s):
Command-line execution failed (Return code: 65)
[BEROR]Code Sign error: The identity 'iPhone\ Developer:\ Eddie\ V\ Phan\ $QV69QS58FK$' doesn't match any valid, non-expired certificate/private key pair in your keychains
Code Sign error: The identity 'iPhone\ Developer:\ Eddie\ V\ Phan\ $QV69QS58FK$' doesn't match any valid, non-expired certificate/private key pair in your keychains

Problem with 'sort and filter' feature of embed codes in Excel Online Web App

So my question has to do with the Excel Online feature where you can share a spreadsheet and embed it in a website with the option of allowing users to sort and filter the data. (The option is under the "Interaction" heading.)
One of the options if you look closely is "Let people sort and filter" which is not checked off. In the embed code you can see "AllowInteractivity=False". The problem is that when I check "Let people sort and filter"
the embed code changes completely - going from:
<iframe width="700" height="900" frameborder="0" scrolling="no" src="https://onedrive.live.com/embed?cid=dontworryaboutitEDFD383&resid=6BAA9620AEDFD383%21107&authkey=AFj3X8xq2U3IfDE&em=2&wdAllowInteractivity=False&Item='Sheet1'!A1%3AI32"></iframe>
to:
<iframe width="700" height="900" frameborder="0" scrolling="no" src="https://onedrive.live.com/embed?cid=dontworryaboutitEDFD383&resid=6BAA9620AEDFD383%21107&authkey=AFj3X8xq2U3IfDE&em=2&Item='Sheet1'!A1%3AI32"></iframe>
If I manually change 'false' to 'true' that doesn't do the trick so I'm not sure what to try next.
Any thoughts?

Hi,
We support Office for Windows in the current forum, since this question is about Office Online, I suggest you post the question in Office Online forum:
http://community.office365.com/en-us/f/default.aspx
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

This is showing up on videos I try to view. I have latest update. It is a box that displays over video that says, get video URL, get embed code, etc. how do I correct it?

A Box has just started showing up that has the following.
get video url
get video URL at current time
Get embed code
report playback issue
get debug info
stats for nerds
about the HTML.5 player
this is on every video on face book. How to fix?

I had the same issue.
I had a youtube downloader app that had a plug-in installed on my Home Safari. I deleted that app. and the plugin. Not sure if that was the culprit, but I figured I'd try.Thought maybe some bug crossed over when syncing the two safaris.
Anyway, I ended up unlinking my Mobile Safari to my Home Safari (iPad; iCloud/Safari/OFF)
A prompt will come up asking what you want to do with previously synced data: Delete from My iPad (don't worry, you'll get it back)
Your bookmarks should disappear.
Reset HOME Safari : Safari/Reset Safari (everything checkmarked)
Turn ON the Mobile Safari again (if you want to relink to the Home version) or keep off (and rebuild it from scratch on iPad alone)
Personally, I turned it on, got my bookmarks back then turned it off and pressed Keep on my iPad.
Now the two aren't linked and I have the bulk of my bookmarks back.
There might be variations of this solution so play around with the process and be sure to refresh your Mobile Safari browser on a video clip to see if it takes.

Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-0

Hi all,
I have found a error "Error Code :-5002 Error Message :Enter valid currency , '51100000-01-001-01'" while adding the DELIVERY document.
I have made a customer and assign then "EURO" currency and add delivery document then it prompts error.
Could anyone solve this problem. is there any setting which i am missing..??
Regards
Sandesh

HI Sandesh,
Check Sap note :1252328
and also check below thread of similar issue:
Re: 'Invalid Currency' error when attempting to deliver order
Hope this will solve your issue.
Thanks,
Neetu

Error code -22: Error while registering

Hi Guys.
I'm new to NW Mobile 7.1.
I'm able to run developed applications and see data on physical devices (PDAs).
I'm also able to deploy and run the same applications on the NWDS Client (Simulator) BUT SEE NO data, because It can't sync.
My question is very simple: How can I set up NWDS Mobile Client (Simulator) so I can get data?
When I get to the Device Information screen (NWDS Mobile Client Simulator),values for Device Name and Device Id are blank
After a sync, the folowing messages appear on my console:
Windows XP
messageReceived in ContainerSyncEventListener: Connected to the server   Level: 1
messageReceived in ContainerSyncEventListener: Sending logon data to server   Level: 1
messageReceived in ContainerSyncEventListener: Waiting for response from server   Level: 1
messageReceived in ContainerSyncEventListener: Receiving data from server   Level: 1
messageReceived in ContainerSyncEventListener: Error code -22: Error while registering
I know that it is a must to setup a Device Name with one that exists in DOE (then Device Id is assigned during registration with DOE). But how can I place a value on Device Name? Should I set it up? then, Is it by copying a .propierties file under a MI/Folder or something?
I can't navigate my applications on the simulator so I need to deploy the files to a physical device every time I build, and this obviously takes more time than just running it on the simulator.
In just a few words, it is driving me nuts.
Thank you in advance,
David.

Hi,
if you have used MI7.0 you expect: sync a device and it is registered. This does not work in Mi7.1
In MI7.1 you need to create a device for a user first, before you are able to sync and get data.
To do this, open the Mobile Administration Portal in MI7.1, go to Administration and create a device for your user. Once this is done, you need to Enable the device.
If the device is enabled, in status INITIAL and has the correct user assigned, you can sync this device with the MI server.
Hope this helps!
Regards,
Oliver

Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face.

Ipad is not being recognized by Windows..I get a Code 43 error on any USB port I try. I have rebooted, restarted, blah blah til I am blue in the face. This is an Ipad not an Ipad2...I can't get this thing recognized by either my desktop or laptop. It used to work...not now.
Any ideas?

Did you already have a look at this article?
iOS: Device recognized in iTunes for Mac OS X

Itouch 3rd gen not recognised in Windows vista but ok in itunes (code 10 error)

Windows Vista pc running latest itunes. pc will recognise itouch 3rd gen in itunes but not in explorer. device driver posts a code 10 error. checked for update driver, response in latest driver installed (digital camera). Need help to be able to download photos in itouch.

Thanks IIIaass, I have checked to see that the Vista pc hase the lastest driver (confirmed latest drivers, incl MTP USB drivers) and tried uninstalling and reinstalling itunes no luck.
I am having the same problem on another computer running windows 7 - itunes ok but code 10 error as well. I have also tried uninstalling and reinstalling itunes on this pc as well - no luck.
Any other suggestions?

Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Hi experts,
I have a big issue in production server,
the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
if i am reprocess or press F6 it is going manually.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Regards,
Kiran polani

Dear Sriram Ramani,
in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
but my problem is in Soap to RFC case..
for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
not for all signals for few signals for some time..
Why it is happening i can't understand.
in repository it is saying Repsitory object hmi failed and address already in use.
is there any problem with loading IR objects.
Please suggest me good suggestion for this type of issue what can do for this to resolve.
Regards,
Kiran Polani

CLIENT_SEND_FAILED error code: 500, error text: Internal Server Error

Hi,
Developed Proxy <-->PI<-->JDBC SELECT scenario and getting the following error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
When I cross checked the JDBC Receiver communication channel in Runtime Work Bench
request and response were successfull. RWB shows the following message.
2009-06-12 09:34:50 Information The message was successfully received by the messaging system.
2009-06-12 09:34:50 Information Message successfully put into the queue.
2009-06-12 09:34:50 Information The message was successfully retrieved from the request queue.
2009-06-12 09:34:50 Information The message status was set to DLNG.
2009-06-12 09:34:50 Information Delivering to channel: DB2ReceiverTableSPT
2009-06-12 09:34:50 Information JDBC Adapter Receiver processing started, required QoS BestEffort
2009-06-12 09:34:50 Information JDBC Adapter Receiver Channel DB2ReceiverTableSPT:
2009-06-12 09:36:35 Information Database request processed successfully.
2009-06-12 09:36:35 Information The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2009-06-12 09:36:35 Information The message status was set to DLVD.
I had gone thru all the previous threads related to 'CLIENT_SEND_FAILED' but
those did not solve my problem.
Can some one help me to solve this issue.
Thanks,
Vijay.

I made necessary changes as per the blog. Appended '_response' for JDBC response structure.
Still I am facing same problem.
Strange....delibarately gave the link so that you can cross-check the JDBC config on receiver side...I assume that the proxy is configured properly with the Sync communication....also mapping is done accordingly...
Regards,
Abhishek.

Generic oracle eway code generation error in Java caps 5.1.3

Hi,
I'm using an oracle eway for adding records to a table. I have a prepared statement in the otd. When I try to build the project I'm getting the following error. Could any one let me know how this problem can be fixed?
com.stc.codegen.framework.model.CodeGenException: Generic Oracle eway code generation error(ERROR_CODEGEN_GENERIC_CODELET_GENERAL)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1860)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.processCodelets(CodeGenFrameworkImpl.java:640)
     at com.stc.codegen.frameworkImpl.model.CodeGenFrameworkImpl.process(CodeGenFrameworkImpl.java:1544)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:405)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.process(DeploymentVisitorImpl.java:308)
     at com.stc.codegen.frameworkImpl.model.DeploymentVisitorImpl.traverseDeployment(DeploymentVisitorImpl.java:268)
     at com.stc.codegen.driver.module.DeploymentBuildAction.loadCodeGen(DeploymentBuildAction.java:923)
     at com.stc.codegen.driver.module.DeploymentBuildAction.access$1000(DeploymentBuildAction.java:174)
     at com.stc.codegen.driver.module.DeploymentBuildAction$1.run(DeploymentBuildAction.java:599)
     at org.openide.util.Task.run(Task.java:136)
     at org.openide.util.RequestProcessor$Processor.run(RequestProcessor.java:599)
Caused by: com.stc.codegen.framework.model.CodeGenException: Exception when generating OTD code ...Exception: javaClass: Oracle_std_otdOTD: Exception when invoke DB Codegen Task...Exception: Invalid parameter type: Class : [Std_insert_PreapredStat] Object: [Param1] Param Type : [DECIMAL].(ERROR_CODEGEN_DB)(ERROR_CREATE_OTD)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateOtdJarFile(OracleEWayCodeletFactory.java:2045)
     at com.stc.oracle.codegen.OracleEWayCodeletFactory$OracleEWayCodelet.generateFiles(OracleEWayCodeletFactory.java:1756)
     ... 10 more
Regards,
Abdul

hi...
i too getting same problem..how did u reslove this...
please help me out...
thanks in advance
KK

Report App Server;Error code:-2147215349 Error code name:docNotReady.......

Hi Experts,
In our application we are trying to connect to the RAS server for the ad hoc reporting capabilities that allow users to modify reports over the Web.
In order to do this what are servers need to run on the server side( I am looking for settings on server side like, what are the servers and services to be run on).
When we try to open the document we are getting the error. The code and error msg are as follows.
private void GetReportClientDocument()
          try {
               sessionManager = CrystalEnterprise.getSessionMgr();
               enterpriseSession = sessionManager.logon(username,password, servername, "SecEnterprise");
               iStore = (IInfoStore) enterpriseSession.getService("InfoStore");
               String sampleReportName = "Test_Open";
               IInfoObjects infolist = iStore.query("Select SI_CUID From CI_INFOOBJECTS Where SI_NAME='" + sampleReportName + "' and SI_INSTANCE=0");
               int lookUpId = 0;
               for (int i = 0; i < infolist.size(); i++) {
                    IInfoObject siId = (IInfoObject) infolist.get(i);
                    lookUpId = siId.getID();
               System.out.println("The CUID is: "+lookUpId);
               IInfoObjects list = iStore.query("select * From CI_INFOOBJECTS Where SI_ID="+lookUpId);
               IInfoObject report = (IInfoObject) list.get(0);
               ReportClientDocument rcd = new ReportClientDocument();
               IReportAppFactory appFactory = (IReportAppFactory) enterpriseSession.getService("RASReportFactory");
               try {
                    System.out.println("Name of Document: "+rcd.getReportDocument().getName());
                    rcd = appFactory.openDocument(report, OpenReportOptions._openAsReadOnly,null);
               } catch (ReportSDKException e) {
                    e.printStackTrace();
          } catch (SDKException e) {
               e.printStackTrace();
Error:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKClientDocException: The document has not been opened.---- Error code:-2147215349 Error code name:docNotReady
     at com.crystaldecisions.sdk.occa.report.lib.ReportSDKClientDocException.throwReportSDKClientDocException(Unknown Source)
     at com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getDatabaseController(Unknown Source)
     at Viewer.GetReportClientDocument(Viewer.java:98)
     at Viewer.main(Viewer.java:27)
Thanks in advance for your help.

Hi Qiang,
Please check http://metalink.oracle.com/metalink/plsql/ml2_documents.showFrameDocument?p_database_id=NOT&p_id=1047650.6 for possible solutions for this error.
Thanks,
Erik

The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed

Friends,
I'm facing below issue while accessing a crystal report. I heard it might be an access issue. But i'm able to access a report within a same folder.
com.crystaldecisions.sdk.occa.report.lib.ReportSDKServerException : The system cannot find the path specified.---- Error code:-2147467259 Error code name:failed
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
at com.crystaldecisions.sdk.occa.report.application.PrintOutputController.export(Unknown Source)
Any suggestions would be very helpful.
Thanks in Advance,
Bharath

Apply trace on RAS and look for errors in the RAS logs at the same timestamp.
These errors come for various errors and tracing RAS would give us a better idea.
It might hapen that you observe these errors for reports which takes more than the RAS timeout to export the reports.
Post getting the RAS logs you can try below steps if we see timeout errors in RAS logs.
Copy clientSDKOptions.xml file from <BO install path>\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\java\lib to the machine where your app is running Open clientSDKOptions.xml and change CORBARequestTimeOut from 600000 to a value large enough to allow the report to render, for instance 1200000. Default value is 600000 (10 minutes)
Specify the location of the clientSDKOptions.xml file at run-time. In your JSP or Java files, use the Java method setProperty from the System class. Set the system property indicated by the ras.config key to the specified directory as: system.setProperty("ras.config","c:\temp"). This function call specifies that the clientSDKOptions.xml file in c:\temp is to be used for locating RAS servers.
Thanks,
Prithvi

Embed code - jscript error

Similar Messages

Maybe you are looking for