Embed Quicktime with poster AND kioskmode

I'm embedding a Quicktime that is a poster movie (single jpg) to click on to start the main movie. I would like both movies to be in KIOSKMODE, but only the poster movie is. The TARGET movie is not. How do I make the TARGET (or HREF) movie also play in KIOSKMODE??? I appreciate any help!!!
Here's my code:
<OBJECT CLASSID="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" WIDTH="260"
HEIGHT="163" CODEBASE="http://www.apple.com/qtactivex/qtplugin.cab">
<PARAM name="SRC" VALUE="http://[myPOSTERlink]">
<PARAM name="HREF" VALUE="http://[myMOVIElink]">
<PARAM name="TARGET" VALUE="myself">
<PARAM name="AUTOPLAY" VALUE="false">
<PARAM name="CONTROLLER" VALUE="true">
<PARAM name="KIOSKMODE" VALUE="true">
<EMBED SRC="http://[myPOSTERlink]" HREF="http://[myMOVIElink]" TARGET="myself" WIDTH="260" HEIGHT="163" AUTOPLAY="false"
CONTROLLER="true" KIOSKMODE="true"
PLUGINSPAGE="http://www.apple.com/quicktime/download/">
</EMBED>
</OBJECT>

Try this:
<OBJECT CLASSID="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" WIDTH="260"
HEIGHT="163" CODEBASE="http://www.apple.com/qtactivex/qtplugin.cab">
<PARAM name="SRC" VALUE="http://myPOSTERlink">
<PARAM name="HREF" VALUE="http://myMOVIElink">
<PARAM name="TARGET" VALUE="myself">
<PARAM name="AUTOPLAY" VALUE="false">
<PARAM name="CONTROLLER" VALUE="true">
<PARAM name="KIOSKMODE" VALUE="true">
<EMBED SRC="http://myPOSTERlink" HREF="http://myMOVIElink" TARGET="myself" WIDTH="260" HEIGHT="163" AUTOPLAY="false"
CONTROLLER="true" KIOSKMODE="true"
target="myself"
PLUGINSPAGE="http://www.apple.com/quicktime/download/">
</EMBED>
</OBJECT>

Similar Messages

HTML code: Embed Quicktime with poster frame

I know this probably isn't this best place to ask this but I thought you guys would have the best answers.
I am trying to post a quicktime video to a website and I have the code working but no poster frame. This is the code I have now:
*<EMBED SRC=video location AUTOSTART=false CONTROLS=smallconsole WIDTH=480 HEIGHT=290 ALIGN=center>*
Minus the Astrix, can anyone help me out?
Thanks
Message was edited by: Ed Saxton

Try this:
<OBJECT CLASSID="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" WIDTH="260"
HEIGHT="163" CODEBASE="http://www.apple.com/qtactivex/qtplugin.cab">
<PARAM name="SRC" VALUE="http://myPOSTERlink">
<PARAM name="HREF" VALUE="http://myMOVIElink">
<PARAM name="TARGET" VALUE="myself">
<PARAM name="AUTOPLAY" VALUE="false">
<PARAM name="CONTROLLER" VALUE="true">
<PARAM name="KIOSKMODE" VALUE="true">
<EMBED SRC="http://myPOSTERlink" HREF="http://myMOVIElink" TARGET="myself" WIDTH="260" HEIGHT="163" AUTOPLAY="false"
CONTROLLER="true" KIOSKMODE="true"
target="myself"
PLUGINSPAGE="http://www.apple.com/quicktime/download/">
</EMBED>
</OBJECT>

[nForce] K7N2 Delta2 Platinum w/Version B.5 BIOS, trouble with post and XP install.

I have
K7N2 Delta2 Platinum
MS-6570E Version 1.0 motherboard
AMD Sempron 2600+
Elixir 500MB PC-3200 DDR (3 sticks, total 1.5GB)
eVga Nvidia MX4000 64MB AGP card
Maxtor ATA-100 PCI controller
I pulled everything else out of the box. I've tried the B.3, B.4, and B.5 BIOS and set everything to Optimized Defaults. I created a striped RAID Array of 4 WD 80GB drives on the primary and secondary onboard controller. The CD is on the Maxtor controller.
There are some problems I can't figure out.
1) The mobo identifies the CPU as Athlon XP 1100
2) The POST hangs just before seeking the IDE drives. I have to hit a key for it to continue.
3) The LED's on the D bracket have the top right light dark until the key is hit. Something to do with initializing the floppy controller.
4) The XP install fails to a blue screen just after hitting the F8 key to accept the license. The code is 0x0000007B.
Can someone tell me what these issues have to do with each other and how I can correct them?

Quote from: dmichael34 on 17-September-05, 22:42:56
The Maxtor controller was removed when you originally suggested to do so. The add on controller is an SIL 680 RAID.
I will try reseating the processor next.
I can also attempt a boot through POST without the array, as this shouldn't affect the boot process.
I did notice that the ctrl-alt-del on the LEFT side of the keyboard doesn't work.
However, the ctrl-alt-del on the RIGHT side of the keyboard does work.
Maybe I've been looking for a serious problem and overlooking the obvious.
I do not see how the CPU temp would cause a pause at boot until "any key" is hit... it sounds more to me like the system has paused to either look for a device or boot a BIOS on a device card.
If I am not mistaken, you are using a RAID card to boot windows? Is this correct?
If that is true it is possible the boot sequence is not set correctly in the BIOS such as "BOOT OTHER DEVICE" ( I cannot remember the exact term in the BIOS)
I am not sure about that but you could try changing the boot sequence so your RAID card is above "HARD DISK" on the list

HTTPS Receiver Adapter with POST and query String

Hi there,
we are currently running a http connection with an external partner. We use the plain http adapter to send documents.
Now we want to secure the whole thing and switch to https.
Currently we solely use the comm. channel in the directory. In the URL we include the required query string (http:/xxx/yyy<b>?msgtype=order</b>)
As I understand, the only way to use httpS is to use a RFC Dest. Type G in sm59.
But I am not able to add a query to the url there.
I guess that it is not an option to ask our partner to search the posted document for parameters. We were already happy that they were able to do it like we have it.
Does anyone has an idea how we could include a query in the url or give somehow the partner explicitly the info about the message type we send?
Thanks in advance,
Helge

Hi Helge,
as far as I know this should be possible with SP16 by using the settings in the adapter configuration.
We had this requirement, but with SP15 it isn´t possible.
Have a look on the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Chapter Adapter-Specific Message Attributes
There you can use up to 6 URL Parameters. I never used it, if you have SP16, try it.
Regards
Thomas

Problem with post and get (jsp to servlet)

===jsp code(login.jsp)
out.println("<form action='servlet/Login' action='post'>");
out.println("Username <input type='text' name='user' /><br>");
out.println("Password <input type='password' name='pass' /><br>");
out.println("<input type='submit' value='Login' /><br></form>");
the above jsp page is included in another jsp page
===jsp code(index.jsp)
<jsp:include page='login.jsp' flush='true'/>
when submit is clicked in the login form, the data is send (to Login servlet) in the url string, even though i am using "POST" method in the form.
the output of request.getMethod() in the Login servlet gives "GET"
what could be the problem?

The code you've shown us looks fine. The problem isn't in the form code you've listed. Is the form being included inside another form on index.jsp? Does index.jsp have any forms of it's own? Perhaps you aren't submitting the form you think you are submitting. Or, are you redirecting in your serlvet somewhere? Or are you forwarding the request somehow?
I agree with the previous post - we need to see the HTML output that index.jsp results in.
Michael

MAKE EMBEDDED QUICKTIME WITH PLAY BUTTON IN FRAME

Hello does anyone know how to make an embed quicktime with a play button in the video frame so it has a poster frame and a button on it and wont play until it is clicked on

It's known as a poster movie. The first file acts as either a placeholder (or a button) that is linked to the second file.
You can use any image format to create your click to play "button" and add it to a single frame from your movie or to another image. Size this 16 pixels higher than your movie source file if you plan on showing the movie controller and save it as poster.mov.
Your html code will have this poster movie load and nothing further will happen until your visitor clicks on it. Once clicked the second .mov file will begin downloading and then playing. You can also use this poster movie technique to load a second movie directly in the QuickTime Player app.
http://homepage.mac.com/kkirkster/C/
One of mine. Take a look at the page source to understand the "href" and "target" tags.

Error message when I Embed QT movie with Poster movie

Hi,
I posted a QT movie with poster movie to my blog,
http://blog.ginauhlmann.com/
All info that I can think of is below, and any help would be greatly appreciated!
I can't get my hosting company to help.
Thanks!
I uploaded a folder named video, with QT movie "FWP1.mov" & "FWP1.jpg" QT poster on to my FTP site.
When I click on the play button, I get the following message:
Forbidden
You don't have permission to access / <table border='0' cellpadding='0' align="left">  <tr><td> <DEFANGED_OBJECT
classid='clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B' width="638" height="458" codebase='http://www.apple.com/qtactivex/qtplugin.cab'> <param name='src'
value="http://ginauhlmann.com/video/FWP1.mov"> <param name='autoplay' value="false"> <param name='controller' value="true"> <param name='loop' value="false"> <DEFANGED_EMBED
src="http://ginauhlmann.com/video/FWP1.mov" width="638" height="458" autoplay="false" controller="true" loop="false" pluginspage='http://www.apple.com/quicktime/download/'> </EMBED>
</OBJECT> </td></tr>  </table> on this server.
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request.
Apache/2.0.52 (Debian GNU/Linux) PHP/4.3.10-2 Server at blog.ginauhlmann.com Port 80.
In the design mode, I clicked on the hyperlink symbol and entered what follows below in the URL box:

<table border='0' cellpadding='0' align="left">

<tr><td>
<OBJECT classid='clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B' width="638"
height="458" codebase='http://www.apple.com/qtactivex/qtplugin.cab'>
<param name='src' value="http://ginauhlmann.com/video/FWP1.mov">
<param name='autoplay' value="false">
<param name='controller' value="true">
<param name='loop' value="false">
<EMBED src="http://ginauhlmann.com/video/FWP1.mov" width="638" height="458" autoplay="false"
controller="true" loop="false" pluginspage='http://www.apple.com/quicktime/download/'>
</EMBED>
</OBJECT>
</td></tr>

</table>
The info that is now in the URL box reads:
%3C%21--%20begin%20embedded%20QuickTime%20file...%20--%3E%20%20%20%20%20%20%20%3 Ctable%20border=%270%27%20cellpadding=%270%27%20align=%22left%22%3E%20%20%20%20% 20%20%20%20%20%3C%21--%20begin%20video%20window...%20--%3E%20%20%20%20%20%20%20% 20%20%3Ctr%3E%3Ctd%3E%20%20%20%20%20%20%20%20%20%3COBJECT%20classid=%27clsid:02B F25D5-8C17-4B23-BC80-D3488ABDDC6B%27%20width=%22638%22%20%20%20%20%20%20%20%20%2 0height=%22458%22%20codebase=%27http://www.apple.com/qtactivex/qtplugin.cab%27%3E%20%20%20%20%20%20%20%20%20%3Cp aram%20name=%27src%27%20value=%22http://ginauhlmann.com/video/FWP1.mov%22%3E%20% 20%20%20%20%20%20%20%20%3Cparam%20name=%27autoplay%27%20value=%22false%22%3E%20% 20%20%20%20%20%20%20%20%3Cparam%20name=%27controller%27%20value=%22true%22%3E%20 %20%20%20%20%20%20%20%20%3Cparam%20name=%27loop%27%20value=%22false%22%3E%20%20% 20%20%20%20%20%20%20%3CEMBED%20src=%22http://ginauhlmann.com/video/FWP1.mov%22%2 0width=%22638%22%20height=%22458%22%20autoplay=%22false%22%20%20%20%20%20%20%20% 20%20%20controller=%22true%22%20loop=%22false%22%20pluginspage=%27http://www.app le.com/quicktime/download/%27%3E%20%20%20%20%20%20%20%20%20%3C/EMBED%3E%20%20%20 %20%20%20%20%20%20%3C/OBJECT%3E%20%20%20%20%20%20%20%20%20%3C/td%3E%3C/tr%3E%20% 20%20%20%20%20%20%20%20%3C%21--%20...end%20embedded%20QuickTime%20file%20--%3E%2 0%20%20%20%20%20%20%20%20%3C/table%3E%20
The info in HTML mode, now reads:
 <table align="left" border="0" cellpadding="0">  <tbody><tr><td> <object classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" codebase="http://www.apple.com/qtactivex/qtplugin.cab" height="458" width="638"> <param name="src" value="http://ginauhlmann.com/video/FWP1.mov"> <param name="autoplay" value="false"> <param name="controller" value="true"> <param name="loop" value="false"> <embed src="http://ginauhlmann.com/video/FWP1.mov" autoplay="false" controller="true" loop="false" pluginspage="http://www.apple.com/quicktime/download/" height="458" width="638"> </object> </td></tr>  </tbody></table>

The error was that I should have been posting the link in the body of the blog text.

FCP7 HELP - Exported quicktime mov plays differently than what I edited on the timeline. The playback shows the clips with ins and outs that are different than what I set in the clips when I edited - some are too early and the clips don't playback

Please help ASAP.
Specs: IOS 10.6.8
Processor 2.4GHz Intel Core i5
Memory 4GB 1333 MHz DDR3 -- Everything is edited, sourced, and stored on an 2TB external hard drive to make things go faster.
Editing with FCP 7
When I export the sequence I edited with quicktime, the playback video is very different from what I edited on the timeline. The playback has the clips with ins and outs that are way off than what I cut, and some of the clips don't show at all or have changed transitions. However when I play in the timeline in FCP, the sequence is fine, just the way I cut it.
The source of the clips was one long .mov that I cut into clips for the timeline. Everything has gone smoothly but the exported .mov is just so different.
How can I get the time codes of the clips to be the same in the exported .movs? I just want the quicktime .mov to represent my edit exactly.
This video is due tomorrow - if the solution is too time consuming, can I play within the FCP player window and Log and Capture?
Thanks,
MV

What is your source material? Is it H.264? FCP does not work correctly with that material.
Click on a source clip in the FCP Browser, and once selected, type Command + 9 to see the item properties for the clip. Either report those properties, or take a screen shot of the item properties, and post that here.
Next, click anywhere in your timeline, and then type Command + 0 {zero} to see your Sequence Settings. Either report those Sequence Settings, or take a screen shot of the Sequence Settings and post that here.
MtD

Quicktime 7.2 and Vista with RAID Arrays

Has anybody been brave enough to install Quicktime 7.2 on their Vista computer which also has a RAID 0 or 1 array? Previous versions of Quicktime have crashed the RAID array necessitating a new computer the first time and a rebuild of the backup RAID driver the second time.
I want to have iTunes and Quicktime on my Vista machine because I have an iPhone and it only syncs with iTunes but I am afraid to try it again. I updated my BIOS and the Intel RAID drivers with a Dell technician a few days ago so I have their "current" drivers but still am not sure this will "fix" the Quicktime crashing Vista RAID array issue.
Any brave souls out there that have tried the latest version with Vista and a RAID array?
PS - I run the latest version of iTunes (7.3.1) and Quicktime (7.2) on my Sony VAIO laptop with Windows XP and it works and I can sync the iPhone there for now.
Dell XPS 410 Windows Vista RAID 1 Array

That sounds good. Those are what i was hopeful about in your case. I haven't seen a report yet of the Intel Matrix issues being fixed by the Dell-tweaked versions of the Matrix updates. However, there have been successes reported with the direct-from-Intel versions of those updates. For example:
http://discussions.apple.com/message.jspa?messageID=4677972#4677972
(I'm thinking however, that if the PC manufacturer offers its own versions of the updates on its downloads pages for a model, those are the drivers that folks should go for with their models.)
Prior to those updates to the Intel Matrix coming out, the state of the art treatment (using the older models of the Matrix drivers/application) is discussed in this post:
http://discussions.apple.com/thread.jspa?messageID=4453007#4453007
But i'd be inclined to go the way you've been going with the Dell technician first.

How to correctly render quicktime with two pop and timecode?

I have a feature finished and need to create the quicktime for the composer and mixer. But I have to add a new time code generator as well. So, at the moment, I have a timeline starting at 58:50 and the feature starting at 01:00:00. It is selected as non-drop.
I was told by my online editor that I would have to either Nest the sequence and then generate my quicktime or I would have to create a quicktime from this sequence and then drop the quicktime on a new timeline and then create a quicktime again. I may be wrong, but it seems that both of those would be uneccesary as shouldn't I be able to just make the edited sequence into the new quicktime with an added timecode (via the generator)? Also because if I have my original timeline at 58:50 and then nest it on a new time line would the new timeline start at 01:00:00 and then generate a mixed up timecode?
So, with all that in mind. I am just wondering what my steps from here are in:
1) How to add the two pop (I was told to go into the effects bin and find the Bars And Tone and extract two frames at 59:58:00 and 59:5801 and I gues drop those two frames into the timeline.)
2) Add the timecode generator ( i know it is available somewhere in FCP)
3) And how to then correctly render a quicktime for the post gang.
After that, I drop the drive and project off to the online guys and they will do the OMF and create the master HD project.
Thanks in advance.

Hi Andy,
Thanks for the reply but am not sure what you mean by removing in and out points and dragging from browser to a new sequence. How does one technically remove an in and out point? And is this a strategy that will somehow enable me to be able to nest the project?
I remember once a long time ago I tried to nest a large project (probably 70 minutes) and I tried highlighting the whole thing (which I may be doing the long way as I have to SHIFT click clip one and then SHIFT click the last clip and then try and find every clip in between that didn't get highlighted - which can take some time) and it would still not nest the project (kept coming up with some warning). So, I ultimately had to nest it by copying and pasting the film in 5ths onto their own sequences and then nesting them and then nesting the nests!
So, I am hoping to do a quicktime for my post guys will not be as long winded....
Thanks.

HT3130 trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

trying to export a 4 minute video to desktop. Only 1:08 seconds exports. I've tried other clips and they all cut at 1:08. Used different exports like Quicktime with the same results.

Good to hear that you've had some success with the import.
I tried 3 times to do it before I finally changed it to H.264, and it worked on the first try. The quality of the compression was terrible with those settings compared to my standard settings, but I'm just glad it worked.
Rather than Share>Export using QuickTime and then choosing your own settings for H.264, you may get a better result if you simply use the Share>Export Movie option. Alternatively, use the Share>Media Browser option (as I mentioned in my earlier post). You will be presented with a range of sizes to choose from. Depending on your target, it's usually best to select the highest size available, such as Large, HD 720p or HD 1080p. However, for producing a DVD it's best to not go beyond the HD 720p size, as the DVD will be downscaled during encoding to Standard Definition in the appropriate size for either PAL or NTSC.
In my experience, both these options (Export Movie or Media Browser) produce a video file of excellent quality. The files will be in H.264 format and will have the file extension .mov or .m4v depending on the size of the export. I'm assuming that your camera records HD video in AVCHD format.
These files work well with iDVD (or other DVD authoring programs). The export process for the presets is optimised by Apple to produce high quality video files at a reasonable file size. So, selecting a preset may give you a much better result. Choosing your own H.264 settings when using the "Export using QuickTime" method could be why "the compression was terrible". You may have selected a data (bit) rate that was too low. There is always a trade-off between quality and file size when compressing video.
So, to summarise, try one of the Apple presets using either Share>Export Movie or Share>Media Browser.
John

Problem with connecting and syncing (quicktime.qts)

Hi,
I have a problem with connecting and syncing my Iphone to itunes.
iphone alone on PC -> uploading files (fotos) is possible
itunes starts normaly, if iphone is not conected.
if i connect iphone after starting itunes, or if i start itunes after connecting iphone i get an itunes-error with message:
AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
ModVer: 7.65.17.80 Offset: 00909a47
i test different things...
- used another USB-port
- used another PC
- used macbook of my wife instead PC
- deinstalled and new installed of itunes (older and newer versions) folow tutorials of apple
- use another USB-Cable...
I'm resigned, Please help me..
Tom

AppName: itunes.exe AppVer: 9.0.2.25 ModName: quicktime.qts
In this context, that can sometimes indicate trouble with a content file on the phone (or Touch).
Do you have any podcasts stored on the iPhone at the moment? If so, if you delete them from the phone, can you connect to iTunes without the error?

Cannot clear document posted with FBS1 and Reversed with F.81 in F-03

We have recently turned on OIM for a Balance Sheet account and are in the process of clearing it. The postings in this account were generated with FBS1 (Accrual/Deferral Document) and reversed with F.81.
Majority of the documents displayed with FBL3N cleared no problem after open item management was turned on, however, there are a handful that are not displayed in F-03 (or F.13).
Please consider the following when answering:
OIM was turned on for the account using ZRFSEPA02 (Copy of the standard/not-delivered program for turning on OIM).
All of the entries were reversed with F.81 and the header of the documents does not contain a "Reversal Date".
I have already tried turning off OIM with ZRFSEPA03 and then turning it back on again with ZRFSEPA02.
My settings in FS00 are correct for the GL Account.
Hundreds of items were cleared. There are 7 documents that don't appear in F-03 or F.13
Also, please do not give me "Beginner level" information such as "Tick the OIM box for the GL Account in FS00" (You cannot turn on OIM in that manner for an account that has line items posted to it - I have been doing R/3 Configuration for 23 years, so I am an advanced Analyst in the FI/CO Area).
Thanks - Back to searching OSS!

Hi,
Actually when report is executed we get following message
Do not use the report program to set up open item management for the
account.
Create a new account with the correct account assignment. Post your
items to the new account. If you want to use the original account
number, you must bring the account balance to zero, change the account
assignment, and repost the items. You can remove the old items by
archiving the documents.
Hence, it is risky to execute this report.
Are you getting these documents in FB03 ?
Regards,
Tejas

I have iPhoto 11 with Lion and when I try to post photos into MobileMe in Share I get the message that iPhoto is not connected to internet. Can anyone tell me how to connect iPhoto to internet?

I have iPhoto 11 with Lion and when I try to post photos into MobileMe in Share I get the message that iPhoto is not connected to internet. Can anyone tell me how to connect iPhoto to internet?

My solution, which is not much, is to restart iPhoto and it then connects to the Internet. This has been an ongoing unsolved problem.

Pdf reader X has problems with small pdf and printer with post script driver

Hi friends.
I have installed new Reader X and then i saw that, when i print a very small pdf with about 50 kb and i print it on a Laserjet 4000 printer the printer has problem with the amount of data that reader 10 produces.
When i install a Postscript driver for the printer my computer makes up to 3.5MB printer data from a 50kb pdf.
When i install a PCL driver for the printer my computer makes only 350kb from the same 50kb pdf file!!!!
When i install Reader 9.3 the 50kb file becomes also only 350kb on the printer with post script driver, and i can print without problems also.
my printer has 8 MB Ram and that should be enough for 3.5MB printer data.
But when i print the pdf with 1 side only, the printer created a side who is only filled with 50% of the text, then there comes out a second page with the message.....not enough memory in the printer.
i can not change the postscript driver to a pcl driver cause our ERP System can not handle printer with PCL drivers.
Can someone help me please.........are there settings in Reader X who can solve my problem ???
Thank you very much for help!

put ? after rwcgi60.exe

Embed Quicktime with poster AND kioskmode

Similar Messages

Maybe you are looking for