(emergency) How to inform the administrator ....?

When Sun Cluster found a fault(may cause failover or not) and repair it, how to inform the administrator or administrative software?
Here is a example.
The NAFO backup group has two adapter. Sometime the active adapter doesn't work and automatically failover to the inactive adapter. We should be informed that there is a adapter is bad , and should replace it with a new one. The information can be transfered by email or by other means.
Should We do?
Thanks.

By default this type of information is written to the standard messages file. You should also be able to pick this information up using snmp via the admin workstation.

Similar Messages

How to change the administrator name

I have tried to change the administrator name on a Macbook pro that I recently sold. I used the following:
Rebooted and held the command and s button, pressed enter and ended up with the following at the prompt: bash-3.2#.
I was trying to get to the root directory in order to continue with:
mount uw /
rm /var/db/.AppleSetupDone
shutdown -h now
I saw a video that said this would allow the new user to start fresh and type in his information however the
bash-3.2# does not allow me to

When you reinstall the OSX, you can change not only the password but the administrator as well.
Ciao.

How to inform the kernel about newly installed STREAMS MODULE?

I made a copy of timod and installed the copy to /kernel/strmod
as a new module (newmod). I modified the t_open.c to make
it to use the "newmod" instead of the timod. The result of the
test is "Invalid Argument". It looks like the kernel doesn't
recognize the module "newmod". I looked throught Sun
Docs, I'm not able to find any instruction for how to
make kernel to recognize my new STREAMS module name
as the add_drv does for device drivers. Can anyone point
me to the right docs and give me some instructions for informing
the kernel about the newly installed STREAMS module?
Thanks
Yuen

Forget my precedent post, here is what's on the configuration page of this module :
("[_]" are checkboxe)
1/ [_] Check this option if your users' DNs look like cn=jdoe,ou=Group1,cn=example,cn=com and Group1 turns out to be the group you want.)
Attribute of the DN which contains the group name:
[Single line text field to enter attribute]
(The name of the attribute which contains the group name. In the example above, it would be ou, as the DN contains the string ou=Group1 and Group1 happens to be the desired group name.
2/ [_] Groups are specified by LDAP attributes
Attribute names (one per line):
[Multi-lines text field]
(If the groups are stored in the user entries, along with the rest of their data, then enter here a list of attributes which may contain them.)
3/ [_] Groups exist as LDAP entries where a multivalued attribute contains the members' CNs
Nodes containing groups (one per line):
[Multi-lines text field]
(Enter here a list of nodes from where groups should be searched for. The module will look them up recursively from the given nodes.)
Attribute holding group members:
[Single line text field]
(Name of the multivalued attribute which holds the CNs of group members, for example: memberUid)
If someone could tell me which checkboxe I should select and what to put into fields it would be king as I really have no idea of what to enter and what to select.

How to restore the administrating users

someone deleted the administrative user on the computer. ive tried to figure out how to restore it but I cant. how do i restore my administrative user to upload the windows 10

zhu19774279 wrote:
I have a user "GIS", it's tablespace is USERS, there are only two tables in this user(RASTER_DATA and RASTER_DATA_RDT).
I put some raster data in "GIS", now I delete all data(delete from RASTER_DATA), but the tablespace USERS is still 7/10GB, how to "clean" the USERS?When you delete a row, or all the rows, the extent that was allocated for them stays allocated. De-allocating/re-allocating extents is a fairly expensive operation, and it is assumed that if a table once needed an extent it will probably need it again, so it is not routinely de-allocated just because it is empty at the moment.

How to decentralize the administration authorisation?

Dear Experts,
I am looking for a solution to decentralize the administration authorisation in a project.
I will create all the roles in the central administration. The local administrator can not create new roles. But I will let the local administrators to create their local users and assign the roles to the local users. And what's more, he can only assign those roles belong to their region. For example, Accounting for Region A.
What kind of authorisation can I give to the local administrators?
Thanks!

You need to name your roles to include the local designator. That way, you can control the ability to assign roles based on role name via auth object S_USER_AGR
example:
role titles - Z:<region>:<APCLERK>
you give your admin in the UK access to S_USER_AGR ACTVT=22 (needed to assign the role) ACT_GROUP = Z:UK:*
They can only assign roles that belong to naming convention Z:UK:* etc.
By restricting S_USER_GRP you can also ensure that the local administrators only maintain users who belong to the local user groups defined for them.

How to inform the listener When session terminates

Hi All,
There is a parameter that is used in the listener.ora or sqlnet.ora that will make the Listener informed when a session is logged off so that the load balance feature can work as expected. Some one of my friends told me the parameter name but i forget it. Can any one help me?
I will try to refrase my question:
if i opened a connection to the database using sqlplus then as a client i make "End Task" or killed the process of sqlplus on my machine, does oracle directly will know that my session (Client Process) is dead so that it will rollback Client's Server process? or how much time it will need to resolve that?
There is a parameter called SQLNET.EXPIRE_TIME should this parameter be changed?
Regards;
Message was edited by:
Tomy3k_Bakr

Contrary to common popular belief, this forum is not a free 'I will look up/abstract the documentation on your behalf' forum.
You can look up sqlnet.expire_time on http://tahiti.oracle.com or may be even Google will work.
Please do not abuse this forum by asking doc questions.
Sybrand Bakker
Senior Oracle DBA

How to recover the administrator user and pass

hello,
I instaled ORACLEXE few days ago, and accord to the instructions I've been using HR user.
but now I'd like to login as administrator because i'd like to create a new user. problem is I don't remember the administrato's user and pass.
what should I do ?
thanks in advance. Andrea.

hello everyone.
thanks for you replies.
I'm on windowns.
Problem is that I even don´t remember the name of my "user" administrator. I don´t know if it's "system" or "sysdba" or "administrator" or "root" ... :(
I´m a student, I don´t know nothing about admin databases.
in generally when I install something I use to write and keep the user I used to install but this time I forgot.
- I tried Aman... clue, problem is that I have to connect to the database as SYSDBA to perform it.
- I didn´t understand Mastalerz clue.
any more clue, or I'll have to unistall my db ? :(

How to find the Administrator Name of OS X Server, and login to it from the Server app from another Mac?

OS X Mountain Lion 10.8.5 and Server 2.2.2 on both Mac Mini Server and Macbook Pro. They are on the same WiFi network.
I want to use the MBP to manage the Server on Mac Mini Server and use the MacMiniServer to provide Caching Service for my MBP, iPad and iPhone.
The problem:
From the MBP Server app, it asks me the Host Name, Administrator Name and Administrator Password. I cannot get it right. Where can I find it from the Mac Mini Server?
What elese shoudl I do / learn?

Run Server.app on the host itself.
Click on the line on the left for the server itself (probably top or second down)
Click on the 'settings' tab.
Make sure you have 'Enable screen sharing and remote management' ticked.
If it's already ticked ...
Find the address you're using for the 'Host' field and try
ping [thataddress]
as a command in the Terminal on the client computer. Do you get numbers up, or errors ?
Use control-c to quit from the 'ping' command.

How to inform the client when the jar files is updated?

I have a question about jar file updatation by web start, please help me.
If a client's jar file is updated in Web server and automatically downloaded to local cache, how the client know which jar file is updated?. If I want to do some special operation after updating a appointed jar file, how can I do?

Contrary to common popular belief, this forum is not a free 'I will look up/abstract the documentation on your behalf' forum.
You can look up sqlnet.expire_time on http://tahiti.oracle.com or may be even Google will work.
Please do not abuse this forum by asking doc questions.
Sybrand Bakker
Senior Oracle DBA

How to disable the Super User menu - (Right click windows icon menu) - Server 2012 R2 - RDS

Greetings all,
Can anyone please advise how to remove the Administrator / Super User menu that appears when you right click the Windows Icon (old start button) in Server 2012 R2 - for RDS users. I have searched and been able to disable access to each of these menu items (Control
Panel, Event Viewer, Run, etc). But I am searching for a way to completely remove the menu. This menu also appears when you use Win-X shortcut.
Hope someone can help.
Terry

Hi Terry,
You can try following points, might helpful in your case. Go to
C:\Users\Default\AppData\Local\Microsoft\Windows
there you will see file called WinX
Right click this file and copy then go to
C:\Users\YOUR_USERNAME\AppData\Local\Microsoft\Windows
then paste the file into the folder.
NOTE: replace YOUR_USERNAME with your actual username.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Not able to access the Administrator Console 7001

Dear all,
We have installed weblogic server 11.1.2 in Aix 6.1.
Installation faced lot of FIXER problems finally we fixed all the required fixers and installation and configuration compleated without any error.
In the last page of Configuration summary we got the Admin consloe and Em console address.
When i try to connect those from my system using IE it says "internet explorer cannot Display the webpage" error comes.
While on Installation we used Humming bird for graphical installation[this is the first time am using this utlity]. And more over i do not have idea how to check about the admin server start and stop from the back end[AIX].
Kindly help me how to access the Administrator Console after Installation
"Administrator Console: http://emar:7001/console"
Exepecting all expects advice and guidance.
Regards,
Paja

Hi Paja,
Please check any weblogic process are running by using.
ps -ef | grep java
use " *kill -9 < pid >* "
Now under %Domain_Home%/ bin folder.
you will find startWebLogic.sh file.
start this one using following way.
./startWebLogic.sh
Once you provide your username and password
Check your last logging like this.
*<Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.17.62.212:7001 for protocols iiop, t3, ldap, s*
in this case 10.17.62.212 is my IP address or listen address and 7001 is my http port.
if you enable SSL list port it will also show you that one.
now try to access console using http://<IP address>:port/console
provide username and password
Here we go to start your weblogic server.
Now in %Domain_Home%/ bin folder you will find one more .sh file says stopWebLogic.sh.
this will help you to stop the server.
Hope this is easy way to start and stop your server.
Regards,
kal

How to get the Report Names which use a Folder in Discoverer Administrator?

Hello All,
How could I get which Reports in discoverer Desktop are using a particular folder in Discoverer Administrator?
Or
How to know which Discoverer Desktop Reports are being derived from a folder in Discoverer Administrator?
We have Oracle 9i DS installed and have a Custom Folder Created in the Administrator, and want to know exactly which Reports/Workbooks are using that folder?
Thanks in advance :)

Well Abhijit,
The eul workbooks have been created by oracle specifically to analyze your eul and make your work easier!. So, I prefer this way to view the information about my eul in a report format in the desktop. Try it! you may like it.
If you want you can follow these steps:
Run the script called eul5.sql located in <discoverer_installation_path>\discoverer\util in the user who own the eul in the database.
Then import the eul5.eex file located at <discoverer_installation_path>\discoverer\ in the discoverer administrator.
Then login into desktop and open the reports in the database, you can see a report called[b] EUL Workbook Management. Open that and goto the sheet named Workbook Dependency - Folders & Items Lookup. I think it the last but one worksheet in that workbook.
Hope it helps you!

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

After a year of no use and a fully discharged battery, my MacBook Pro refuses to accept the administrator name and the password. How can I reset these?

After a year of no use and a resulting fully discharged battery, the MacBook Pro refuses to recognize the administrator name and password (both). It has system OS X 10.6 which can not be upgraded without the information. How can I reset or reistall the administrator name and password?

Thanks to all who responded. You are all absolutely correct. However, this Ipad was a gift to my wife who was dying of cancer in the hospital and wanted some entertainment. So I started it out with her Apple ID. After she passed away I moved from Sacramento to Austin and eventually proceeded to get the Apple ID changed from my wife's to mine. Meanwhile when she was in the hospital I opened an Itunes account in my name to buy movies for her. That was the first mistake.
Then during the move to Austin I lost track of the IPAD and later found it and tried to use support but could not remember the proper ID. Later the folks at the Apple store helped me create a new and novel Apple ID that was unfortunately unlike any other.
The botom line is that I am stuck with three Apple IDs and three passwords. I am told by Apple there is nothing they can do about this as IDs cannot be changed or destroyed. I can quit using them or start a new account but when I try to do that the system keeps remembering too many things from the past and resists.
Even if I sold this Ipad and bought a new one, the system memory is still there.
I think the real problem is that destop and laptop computers are totally owned by an individual and that individual can control logins and passwords to his liking. IPADs and similar Apple products are different in that the corporation has built in their own intrusion detection schemes because of the relation to Itunes.
One thing I thought about is to open a new Itunes account pretendding to be a new customer with my regular Apple ID. Perhaps I could do the same with Apple Support.
Thanks for your comments.
RAZ

How do i get the administrator rights to install the adobe createpdf desktop printer

how do i get administrator rights ti install adobe createdpdf desktop printer?

The CreatePDF Desktop Printer has been retired. Please see https://forums.adobe.com/docs/DOC-5131 for more information.

(emergency) How to inform the administrator ....?

Similar Messages

Maybe you are looking for