Empty report - info?

Hello all.
When I run report without records I see "No data found" message.
I want to disable some elements (by conditions) on the page, when report will be empty. How can I do it? Does exist any variable which can say me that this report is empty?
BTW, I know that I can count all rows in my SQL query and set any variable with this information, but I must run for it two queries (count and main query).
regards,
Jarek

Jarek,
sorry, you 're right.
for your problem I suggest to use a condition to show the report, based on your count-query.
the report itself contains the mainquery and will be fired only when the count gives a result greater then 0 (zero).
Leo

Similar Messages

Print empty report

Can I somehow print an empty report, and specify with a parameter how many times it should be repeated?
The report is a form with checkboxes, and sometimes we want the empty one for someone to fill in when out on the field. And since this form is a subreport, we cant print the entire report over again, but need the subreport to be repeated, let's say five times.
/Thank you!

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly

Firefox crashes upon open - won't send crash report; crash report info summarized below

I have one computer that crash every time I start Firefox. Ocassionally the firefox window will appear for less than a second and then the Crash Report Window shows up; most times it goes right to Crash Report Window. Then it is for some reason unable to send the crash repor; it keeps looping back to the crash report. I've checked my modem and router are operating correctly; I have another computer that's working fine. I've run scan for Trojans, viruses and still see the problem. Any help would be very much appreciated as I'm stuck at this point. For what it's worth, Internet Explorer has the same problem, crashing upon opening.
== Crash ID(s) ==
not available

Hello. I have a similar problem to the question of Ryan Vaught, (Firefox crashes upon open - won't send crash report; crash report info summarized below [MY] Firefox version: prior one to 3.6.7 Operating System: Windows XP Provessional). Mine is a bit different tho. Firefox seems to be crashing and my internet crashes right with it. When it does this, it also takes out some Win32 system .exe files. I too have ran AVG (Full Coverage /Purchased one) and then updated to Viper (Sunbelt Software) and it comes up clean of any viruses, etc. Once it crashes and I close Firefox, the crash report request comes up. When I hit send, it says it cannot be sent with no additional information as to why. I just updated Firefox to 3.6.7 and sure hope this helps, but it almost always happens when I am playing games that use flash. I can send a screenshot if you need it and feel free to edit my question if need be. I've checked my Viper settings and can get to all the websites so far trying to rule it out. Deleted my internet set up and then added it back as a new connection (hope that made sense), so I don't know who to be asking this question of, but hoping you may know the answer why I can't send the crash report. Whew! Sorry for the lengthy question/issue. Your help is greatly appreciated!! Carolyn Burnam
<blockquote>removed personal email -MJB</blockquote>

Empty Report when field Value is a multiplier of 256

Good morning from South-Tyrol, Italy!
I got a strange behavior of Crystal Reports XI R2 SP5: two tables are combined with an Left Inner Join through an long integer field (the number of the header record of a document and the singles lines of the same document). Now I get an empty report, when the number of the document is 256, 512, 768, 1024 and so on! All other documents are viewed in the right matter.
I'm using the native connection to an Pervasive database (PervasiveSQL 2000i) but the same behavior will happen when I change to ODBC.
With Crystal Reports XI SP4 this problem not occured; I upgraded my application just this weekend!
Thank you for help!
Jens Ferstl

Hi again,
Only for completeness: the problem isn't restricted to the tables described above: always when a table is connected to anther trough an integer (with key) data's arn't retrieved (or displayed).
Dear Don, did you find the origin of the problem? I'm would like to upgrade my application to CrXI R2 because this version resolves a important problem I have with CrXI (application crashes) and need to plan times.
Thank you,
Jens

Empty Report Layout in Dashboard instead of NO RESULTS

Hi I am using OBIEE 11.1.1.5
I have created some reports
When I give some filter conditions I expect it to display No results
But What I am getting is an Empty Report Layout with the Column Headings and Grand Total without any values in the cell
Have anybody experienced it
What is the reason for it and How to Overcome this
Thanks in Advance
Abdul
Edited by: Abdul Kather Jeelan on 24 Apr, 2012 11:35 PM

HI ,
Try this way,
How to do this--
Please create No Result report and apply using( Guided Navigation) to main report
1. Drag the no result report in your dashboard.
2. Click this report Guided Navigation Properties --> Reference Source Request -- YES then ----select this report path into -- Source Request- then Show section--- select this option (If request returns Noting).
3. The out put like if there is no date you will get NO Result report.
Please do work around here.
Award points it is useful.
Thanks,
satya

Empty report with pagination, rows not displayed

Dear HTML DB Team,
We have in our reports the next error: An empty report with pagination appears , no rows not displayed
The test case to reproduce the error:
1. Create "SQL report" with next report attributes in "Layout and Pagination"
a. Row ranges 1-15 16-30 in select list (with pagination)
b. Number of Rows : 15
c. Number of Rows (Item): empty
d. Max Row Count: empty
2. Fill the table on which the report is based with 17 rows
3. Go to the 2nd page of the report , pagination rows 16-17 of 17
4. Remove 2 rows from the table, refresh report
5, The pagination shows now 1 - 15 of 15 rows
- no rows displayed
- no "previous button" ( only )
- no way to get the rows displayed, except logging out and in again
Any suggestions?
Erik

Hello,
i encountered the same problem while developing in HTMLDB.
In application builder, i select application Application 106, then click on items, then click next ( the application has 22 global items). Now i want to take a look at the global items in application 105 (there are only 5). In the menu i click Builder - Application 106, select application 105 from Available Applications, click Go and Items. It shows no rows, but says that is displaying rows 1-5, and offers a Next button. No way to see/modify the items unless make a new session or go back to Application 106, Click Previous to see the first page of global items and then again switch to Appication 105 or click to the next button and then manually set pg_min_row=1 in URL.
One more question - is this forum the right place to report bug suspicions, or is there some other special place for that?
Best regards,
Andres

Empty report returned from WEBI and Crystal report when using external hier

Hi,
WEBI and Crystal report build from BEX query returned empty report when we used external hierarchy 0PROFIT_CTR. In BEX we don't have any problems with it.
No authority check is perfomed on the hierarchy when we start the report in WEBI/Crystal. Only check on the hierarchy is performed when the root authorization is assigned to the user

We using BO4 SP12

Report with online template runs online, but exports empty report.

I created a simple Table template using the online template builder. The report consists of four columns. It runs fine in online mode, and displays the data. When I try to export this report to any other format, while still viewing the table in the browser, it exports an empty report! Only the title is visible, no data rows.
Just another example of how bad this software is. Every day it's a different bug!

It's the conditional highlighting that breaks the report. I made it so a few rows were emboldened based on the value of one column. Nice feature, Oracle.

Despite using "USER_EXIT" command, getting an empty report when ran the concurrent program.

Hi,
In my report I am using "OE_ORDER_HEADERS_V" view in my data group query. This view is operating unit(OU) specific so, i am using "USER_EXIT" commands in before report and after report triggers correctly.
Despite making above two setups when i ran my concurrent program from front end getting an empty report.
Please help in fixing this.
Thanks
Sandeep.G

Hi All,
Solved the issue !!!
Reason: I am writing report for custom application(XXKES) where i diddn't checked my profile(mo: Operating Unit).
which is 912.
And my OM responsibility is in 204 OU so, this is resolved by changing the OU profile of my custom application to 204.
Next you do this on custom app. make sure your all other coordinating apps are also having same OU profile.
Regards
Sandeep.G

Displaying report info

Dears,
i use pl/sql to display my report info
DECLARE
   v_counter     INTEGER         := 0;
   v_line        VARCHAR2 (4000);
   v_rec_in_row INTEGER         := 10;
   lpar varchar2(50);
   env varchar2(15);
BEGIN
   HTP.prn ('<table>');
   HTP.prn ('<tr>');
   HTP.prn ('<td>');
   lpar:=v('P48_LVAR');
   env:=v('P48_RA_TEST');
   CASE
    WHEN lpar='SERVERS'
                THEN
                  FOR c IN
                      ( SELECT '<table width="">'
                         || '<tr><td><a href="f?p=200:46:7343887876276495::NO::P46_TEST,P46_TABLE:'||s.SERVER_NAME||'"><img src="#WORKSPACE_IMAGES#folder.GIF"/>'||s.SERVER_NAME||'</td></tr>'
                         || '</a></table>'
                         AS emp
                          FROM SERVERS s,ENV_SERVERS es
                     WHERE s.SERVER_NAME=es.SERVER_NAME
                     AND es.ENV_NAME LIKE decode(env,'ALL','%','ITT','itt','UAT','uat','DEV','dev','PROD','prod','%')
                          ORDER by 1)
                          LOOP
                           v_line := v_line || c.emp || '</td><td>';
                           v_counter := v_counter + 1;
                           IF v_counter = v_rec_in_row
                           THEN
                               HTP.prn (v_line);
                               HTP.prn ('</td></tr><tr><td>');
                               v_line := NULL;
                               v_counter := 0;
                           END IF;
                       END LOOP;
                       HTP.prn (v_line);
                       HTP.prn ('</td></tr></table>');
      WHEN lpar='ALIAS'
            THEN
                  FOR c IN
                      ( SELECT
                           '<table>'
                         || '<tr><td><a href="?p=200:46:7343887876276495:::::"><img src="#WORKSPACE_IMAGES#folder.GIF"/>'||a.ALIAS_NAME||'</td></tr>'
                         || '</a></table>'
                                  emp
                         FROM ALIAS a , SERVERS s,ENV_SERVERS e
                     WHERE a.ALIAS_SERVERNAME=s.SERVER_NAME
                          and s.SERVER_NAME = e.server_name
                     and e.env_name LIKE decode(env,'ALL','%','ITT','ITT','UAT','UAT','DEV','DEV','PROD','PROD','%'))
                              LOOP
                                v_line := v_line || c.emp || '</td><td>';
                                v_counter := v_counter + 1;
                                IF v_counter = v_rec_in_row
                                THEN
                                    HTP.prn (v_line);
                                    HTP.prn ('</td></tr><tr><td>');
                                    v_line := NULL;
                                    v_counter := 0;
                                END IF;
                            END LOOP;
                            HTP.prn (v_line);
                            HTP.prn ('</td></tr></table>');
END CASE;
END;But sometimes i have more than 600 records to display , and the display is not user friendly.
Is it possible to display report on 3 pages? with the same query?
Thx.
Celio

Convert it to a standard report with a custom report template, using PL/SQL function returning a SQL Query to switch between the 2 queries, and [this technique|http://htmldb.oracle.com/pls/otn/f?p=23415:2:0] to get the required layout. As it's a standard report you can use standard pagination.

Avoid to display empty report viewer window?

<p>Hi,<br />We use CR4E with Thick Client environment.<br />First we prepare a report as ReportClientDocument.<br />Then we display this with the Crystal Report thick-client viewer.<br />According to the report parameter it is possible that the report does not find data.<br />In this case an empty report viewer window is displayed. We want to avoid that.<br />Is there a way to check the report if it find data or not (e.g. catch the SQL of report). </p><p>Thx. Peter </p>

Hallo, I´ve got the same problem.
I want to pass only specific values to
the report. But when I try to launch the viewer,
a parameter field page is displayed. When
I click on "OK" without entering some values the
report is displayed correctly. How can I turn
of displaying this page?
Thanks

SDK reports under "Collector Base" generates empty report

Hi,
I am trying to develop some custom reports which are very similar to
the ones under "Collector Base" directory.
Is there a document on how to make use of those reports?
My problem is that, even if I build the report (eg. Top 10 report)
without any modification when I upload the report to the Sentinel Log
Manager and run, it generates empty report, i.e. the title and footers
exist but there is no event data inside the charts.
What am I doing wrong?
Thanks.
hkalyoncu
hkalyoncu's Profile: http://forums.novell.com/member.php?userid=63527
View this thread: http://forums.novell.com/showthread.php?t=451659

Hi Hakan,
The reports under Collector Base aren't actually intended to be used as
standalone reports - they are templates that are used when constructing
a Collector Pack for a particular Collector. During that build process,
the vendor and product name associated with the Collector are injected
into the report to filter the data. So I'm guessing that what you're
seeing is an artifact of the template not being "converted" into a real
report.
You can probably still use these as starting points, but look in the
report definition specifically for variables that talk about
VendorProduct - I think you'll find such a variable in the query that
you'll have to remove.
DCorlette
DCorlette's Profile: http://forums.novell.com/member.php?userid=4437
View this thread: http://forums.novell.com/showthread.php?t=451659

Nessus returned an Empty report

Hi Archers,
I have just installed nessus, register, update plugins, create newuser.
Everything seems to be ok.
But when I run gui nessus client, and perform a scan, I got the following error: "nessusd returned an empty report" after 2 seconds.
Try to google and solve this issue but the problem is still there. I try to run nessus client in the same PC with server or in different PC, but the problem is still exist.
Any solutions?
Thanks

I tried the auto increment part to it gives an error saying the id cannot be null.
Further when I am trying to enter it says duplicate key error.
Do you have a sample for autoincrement field in jbosscmp-jdbc.xml.
It would be of great help to me.

Suppress empty report?

Dear all,
is there a way to generate a report instance only if there hits in the recordset? This would avoid sending empty reports. My first idea work-around was to create a report doing a count on the recordset and fire an event in case of hits. This would then trigger the original report. Unfortunately I could not find a way to fire events depending on the number of rows in the recordset.
I'm ob CR XI Server Rel 2
Any help is highly appreciated!
Best regards,
Tilman

Dear all,
found another work-around...
I use a running total to count the number of rows.
In the report footer I add an expression "1/running total". For empty reports a division by 0 will occur and causing the report to fail.
Any better solution? Please!
Bye,
Tilman

Server Monitor doesnt't report info, memory, drives and network

Sermer Monitor connects OK to the server but most of the Info page is empty, displaying 2 dashes only in the fields. It only displays the LOM IP address and the Last update field. Even not the serial number! Also, on the Memory page the Slot shows None. The same situation on the Drives and Network pages. Just as if the server has no hard drives or network interfaces at all. Everything else seems to be OK -- Power, Temperature, Blowers and Security - all display meaningful information.
I am sure that the missing things were displayed sometime in the past, but now they have vanished. I can also restart or power off/on the server. But I cannot get the System Profiler Report or maybe I am stupid and don't know how to see it, because the log says - Apple System Profiler report received from server.
Maybe this is of no relevance but it is also not possible to get any Reports from the server using the ARD program. It just sits there waiting for the report but it never comes
Any ideas?

I found a solution that worked for me.
I shut down the server and did a warm and cold reset of the LOM with the Console and IPMITool command from my Administration Client.
ipmitool -H <ip of LOM-Port> -U <username> -P <password> mc reset (warm|cold)
For a description see 'man IPMITool'
After restarting the server all information was shown.
Matthias

Empty report - info?

Similar Messages

Maybe you are looking for