Enable E-mail functionality for RFQ/PO.

Hi All,
I have a requirement to enable E-mail functionality to send the PO/RFQ output to the Vendor. Whenever we go to the messages in the PO ME22N or ME23N & click on the out message, we should get a pop up asking to enter the E-mail address.
Please let me know what settings do we need to do?
-Muneer.

Hi,
Purchase order via e-mail in SAP system can be done , there are some configurations and pre-requisites to do as follow:
1. You must maintain an e-mail address in the address in the vendor master.
2. The same applies to your own user master. You also have to specify an e-mail address there in order to identify the sender.
Note that it is not possible to change the e-mail address of the vendor via the SAP purchase order transaction (ME21N, ME22N, and so on). The system only uses the e-mail address of the vendor that is maintained in the vendor master!
3. For the output type for default values, a communication strategy needs to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the Customizing via the following path: (SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy). As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
4. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
5. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
6. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
7. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node.
For more details, check out the OSS note :191470
Regards,
Biju K

Similar Messages

Anyway to selectivily enable/disable bluetooth function for selected apps like papago in iphone.

Hi,
Anyway to selectively enable/disable bluetooth function for selected apps like papago navigator in iphone.
I want to maintain bluetooth connectivity to car headset for handsfree driving while papago navigator on ky iphone continuously guide me on the road using the iphone speaker. So when someone called me on the phone, it will use the car headset. is there such as apps?
Rgds,
Kpk

Hi,
In pageflow definition, "Train Stop-->Skip" property controls the enable/disable state.
If Skip value is true (it can be controlled with EL expression) than related link and button in train components are disabled.
They are enabled other If Skip value is false (It is default).

Automated mail function for sales order acknowledgement

Hi Friends,
We have a requirement for automated functionality for sending mail to the sold to customers when the order is first saved.
We already have a customer program to convert into PDF and mail directly.
But this is to automatically send the mail to sold to customer. I think for acknowledgement we have already a existing outputtype.
I understand that we need to maintain the mail address over the customer master of the sold to.
Apart from this, is there that we need to maintain to have this automated functionality of sending mails.
I had tested with existing Z otuput type by changing the transmission medium to 5 and entering my own email id where it prompts to enter mail id. But it wont send any mails.
Just wondering if we have any determined steps that i can follow.
thanks in advance.
Best Regards,
Ram

Hi:
Order acknowlegement output BA00 or your copy of this one is capable of using medium 5 to send SMTP mail to an external address ( even PDFs can be attached is your want). When you trigger the medium 5 output, did the output get process successfully and you get a green light in your output screen? If not, have a look to see if a communication strategy is assigned. If yes, your configuration is OK. What is missing is mostly likely that Basis have not set up SAPCONNECT to send SMTP mail externally for you.
Frank

Enable Dual control function for FBZ2

Hi,
Its related to Dual control functionality for vendor master data. I got a issue, if I change the sensitive fields for a vendor master and run F110, then it shows exception that vendor master not yet confirmed.
IS it possible to post outgoing payment through transaction FBZ2, in this case?
I have seen some transactions where the clearing document was posted by transfering the payable amount to intercompany or offsetting account and making payment later, without getting any exception, eventhough vendor master change not yet confirmed.

hello, anisha.
like you, i have also wondered what the payment block in the customer master is for. after reading the documentation and asking an FI consultant, i gather that this block is apparently used to prevent automatic payment transactions for a customer.
again, why anyone would want to automatically post payments for a customer is an issue i wish to explore. perhaps this applies to scenarios where very many customers pay the exact invoice amount or have the payments guaranteed? or perhaps to prevent automatic offsetting of a customer/vendor account?
regards.
Edited by: jonathan y on May 6, 2009 10:23 AM

E-mail functions for Custom Extensions

Hello,
Is there a way to use the e-mail functions that P4P uses, including reading the config file, in a Custom Extension?
Thanks, in advance.

you can use something like the following
//If you want to get the current user's email (as the From):
var currentUser = userService.UserContext.User.ContainedUser as IUser;
string from = currentUser.email;
// To get the email info of the originator from a spec, access the SpecSummary's Originator property, which is an IUser, and then get the email property of the user.
string to = <yourSpec>.SpecSummary.Originator.email;
string subject = "...";
EmailService().SendMessage(from , to, subject, body);
private static IUserService GetUserService()
return AppPlatformHelper.ServiceManager.GetServiceByType<IUserService>();
private static IEmailService EmailService()
return AppPlatformHelper.ServiceManager.GetServiceByType<IEmailService>();

Enabling the Export function for a distribution list in 'Private folders'

Dears,
Could someone please guide to the appropriate authorization that would allow the 'Export...' function for a distribution list created in a folder under 'Private folders' - Transaction : SBWP
The option is dimmed, although the user used has the SAP_ALL profile.
Thanks.
Reda

click file/publish settings/flash/actionscript settings and make sure frame 1 is set as the export frame.
if that's already set, don't use test scene.

E-Mail Functionality for PO's

Hi Every Body,
I am working on email functionality.
=> (Requirement) Sending the PO Order Ouput to vendor via email in the form of PDF fom.
=> I am getting some problem while receiving mail in the OUTLOOK.
=> I am getting mail in the form of "TEXT Fomate" with special character instead of "PDF Formate".
For Your Information.
=> I am using following functional module.
CONVERT_OTF - PDF Conversion FM
SO_NEW_DOCUMENT_ATT_SEND_API1 - E-Mail FM.
=> Unicode is Mandatory.
If any body is aware of this problem, provide some inputs to me to go ahead forward
Thanks & Regards,
Naga.

Hi Naga
Firstly , As you are getting problem while receiving mail through Outlook , and as you are getting mail in text format, then you need to check the Conversion OTF - PDF
.Secondly also check what is the condition record you have maintained for the output type. with e-mail only or any other transmission medium
Finally check in the output type wheather you have assigned any smartform data , if assigned then go to smartform and check how the text conversion has been maintained
Regards
Srinath

Mail functionality for entry made

Hi,
AT the time whenever employees (created as vendors) account get hit,we want to send mail to them.
Is there any std functionality by which we can inform them about their account statement.
I know this can be done by exits & all, But if any standard is there then I want to use that.
Your help will be highly appreciated.
Regards,
Meenakshi

Hi,
No std workflow is available.
regards

How to use Mail functionality OPTT in the Schema

Dear All,
We have a requirement where we need to send a mail to the Time Administrator if Time Evalution ends in Error. We have implemented the functionality OPTT MAIL option in the schema, but it is not sending the mail to Time Administrator. We have maintained the Time Administrator table T526 with the SAP ID.
Could anybody tell us, we have to do anyother configuration to enable the mail function
Thanks in Advance
Rajesh.S

Hello Folks,
Can anyone please let me know How to send a mail notification to the Time Administrator.
In the Schema, OPTT MAIL 1 has declared.
The Time Administrator is maintained in T526 table.
Do we need to do other than above to send mail.
Kindly let me know.
Note. The COLER function is not used in the Schema.

Oki Printer scan to mail function - which settings for icloud?

I am using an Oki MC560 multifunction printer.
It also has a scan-to-mail function which i now intend to use with my @me.com address.
Unfortunately i can't find any information what to enter in the setup.
At least in the preferences it only suggests a server number (like 192.168.3.5), not a name (like smpt.me.com).
Does anybody know the correct preferences for that printer or where to get it?
Oki itself couldn't provide me that information.
Thanks a lot.

Incoming server: imap.mail.me.com
Outgoing server: smtp.mail.me.com
username: your email address
smtp server port: use defaults. SSL Enabled
All this means practically nothing
1. "Incoming server: imap.mail.me.com"
     (Tried To set-up new mail account with this - nothing)
2. "Outgoing server: smtp.mail.me.com"
     (Is already set to this!)
3. "username: your email address"
     (where?)
4. "smtp server port: use defaults. SSL Enabled"
     (Where? There is no "default setting" in Mail 2.1.3)
My mail settings are all messed up and need to be completely re-set.
I need more descriptive instructions (illustrated), if possible, for setting up a new mail account in Mail 2.1.3 that will work with the new iCloud.

How to enable push mail for gmail in iphone 6 plus

how to enable push mail for gmail in iphone 6 plus

Tommacgr wrote:
You can setup gmail account in iphone as exchange so the trick is simple and easy and push notification work after instantly . Just follow this steps http://email.about.com/od/iphonemailtips/ss/Set_Up_Push_Gmail_in_iPhone_Mail_Ste p_by_Step_Screenshots.htm
You can only set up a Gmail account as an Exchange account if you have a paid account. Google dropped Exchange support for free accounts two years ago. That link is just a bit outdated.

How do I enable the "fn + enter" key to work as an "insert" function for windows on my mac laptop?

how do I enable the "fn + enter" key to work as an "insert" function for windows on my mac laptop?

enable /disable function within the Bootcamp control panel within Windows Vista or 7

CC with external mail for RFQ and PO

Dear All,
Mails are triggered to the vendors for RFQ and PO. The Purchase department does not get any report or system confirmation if the mails are successfully triggered or not. Having a CC to the external mails would confirm that the mails have been triggered by the system. Can we have a CC for all the external mails getting generated for the RFQs and POs? Is this technically feasible?
CC : can be user sending the RFQ or PO.
Regards
Sushant

Dear All,
Mails are triggered to the vendors for RFQ and PO. The Purchase department does not get any report or system confirmation if the mails are successfully triggered or not. Having a CC to the external mails would confirm that the mails have been triggered by the system. Can we have a CC for all the external mails getting generated for the RFQs and POs? Is this technically feasible?
CC : can be user sending the RFQ or PO.
Regards
Sushant

For users having problems with Mail functionality...

Hello! I have been having problems with Mail functionality as well, so, I took a few steps to see if I could solve the problem on my own.
My problems were:
Mail would freeze when sending mail, or, when I pressed quit, it would freeze.
If I toggled between inboxes too much it would freeze up.
Even after trying the many techniques others offered on this board, Mail still froze up. So.. here's what I did:
1.) Turn off the auto-retrieve mail function in the preferences/general menu. Set it to a manual check. Just check it yourself every once in awhile. It may not be as convenient, but it works, trust me.
2.) Under the fonts and colors menu, set all three fonts to the SAME font (mines Century Schoolbook, but anything works) and turn off fixed-width font. Sometimes mail has a tough time decoding and working with texts, and causes it to freeze.
3.) Clean our your main inbox! Place the emails that you want to keep, but don't need to be in your inbox in a new folder on your inbox bar (mines aptly named 'Saved Messages.' That way, when you open up Mail to your default account, it doesn't have 1,000+ messages to index. Also, try to keep the inboxes from having more than 100-200 messages per. It seems to frown on any more than that.
After trying these three easy, steps, restart mail and see if things run smoother. I have had no problems since these changes, and mail runs a ton better. Plus you don't have to worry about deleting your library/mail folder anymore. Let me know if things work out so I can see if my theory is a universally proven thing. Thanks and good luck!
iMac G5 20" Mac OS X (10.4.5)

Good question. I have worked very little with IMAP other than as a testing device, so, on a daily routine I cannot say how it would function. However, I can only expect that by having the option to download all emails for offline viewing selected, you are right in it being a lag creator. Another suggestion would be, if you are running a single-computer setup, to have the account delete emails from the server after recieving them on your computer. Thus, you reduce the risk of repeat downloads or unnecessary build-up on the server end. DO NOT select this option if you run multiple computer set ups on one AppleMail account system or you will cause some discrepancies and/or data loss from system to system. Or, if you have emails redirected from a seperate server to Mail (i.e. I redirect mail from my university email account into Mail so that I don't have to go to the web-mail site to check it--> just like Gmail or Yahoo etc etc) you won't be able to check them from the web-based email system if you have the system delete them. Ok that sounded confusing. Solution: have the system remove emails from the server after a week (or any period of time, just not immediately) so that, in the off-chance you need to use the online system, you will have access, and will give you a chance to check the emails on other systems without a threat of data corruption (by corruption i mean that frustrating feeling you get when you can't find that super important email that was in your inbox just 10 seconds ago on your desktop etc.)
I will see if I can learn anything more about IMAP Ernie. Its definitley the biggest problem source for Mail, POP and .Mac being simple and functional as long as you don't play with the settings too much. As far as the issue of Offline viewing goes, try turning it off and seeing how Mail functions.
BEFORE you turn it off, however, I recommend saving all of your emails in your inbox as a text file or something so, in case the server burps and has a brain flatuence, you don't lose anything. Been there, done that, thrown the books against the wall in a frustrated rage.
My only reserve about the Offline Viewing is whether or not Mail will, when you click "recieve mail," have to re-download the emails from the server each time. If so, then it may end up taking longer and lagging more. The issue here is obviously minimizing the amount of activity between Mail and the email server without jeapordizing information on the server or multiple Mail programs on the same account. When we can find that balance, I think Mail's potential will be realized. Keep the questions coming.

Mail account for: shortname is not enabled

After migrating over from 10.5, my Open Directory users are unable to access email. All other services are working. The recurring pattern is "mail account for: <shortname> is not enabled". Any ideas, even crazy ones?
[Mail Access log]
auth(default): od(pseudonym,127.0.0.1): auth mech=CRAM-MD5
auth(default): od(pseudonym,127.0.0.1): username=pseudonym, challenge=<[email protected]>, response=df109a3ef93c61c1e2b7fc4fb1f67fa4
auth(default): od(pseudonym,127.0.0.1): mail SACL is enabled; overriding settings in user record
auth(default): od(pseudonym,127.0.0.1): found user in local table: user=pseudonym
auth(default): od(pseudonym,127.0.0.1): mail account for: pseudonym is not enabled
auth(default): client out: FAIL 113 user=pseudonym
imap-login: Aborted login (auth failed, 1 attempts): user=<pseudonym>, method=CRAM-MD5, rip=127.0.0.1, lip=127.0.0.1, secured
[User Record from Workgroup Manager]
<?xml version="1.0" encoding="UTF-8"?>
<dict>
<key>kAPOPRequired</key>
<string>APOPNotRequired</string>
<key>kAltMailStoreLoc</key>
<string></string>
<key>kAttributeVersion</key>
<string>Apple Mail 1.0</string>
<key>kAutoForwardValue</key>
<string></string>
<key>kIMAPLoginState</key>
<string>IMAPAllowed</string>
<key>kMailAccountLocation</key>
<string>server.example.org</string>
<key>kMailAccountState</key>
<string>Enabled</string>
<key>kPOP3LoginState</key>
<string>POP3Allowed</string>
<key>kUserDiskQuota</key>
<string>0</string>
</dict>
I've already had to update the dovecot.conf once <http://support.apple.com/kb/HT3792>, but I can't tell if this is on the Dovecot side or the OD side.

Many thanks to Apple Enterprise Tech Support.
The access control list for mail was not set to all users and groups.
To fix:
(1) In Server Admin, select the server.
(2) Select the 'Access' panel.
(3) Select the 'Mail' service'
(4) Set the radio button to 'Allow all users and groups'.
Previously I'd had mail restricted to 'only users and groups below'.

Enable E-mail functionality for RFQ/PO.

Similar Messages

Maybe you are looking for