Enable syslog debug level 7 and send logs to syslog

Hi,
on cisco ASA, I've to enable syslog debug level 7 and send logs to syslog. how to do that?

Unless you have been fiddling with logging levels previously, most ACE's will be using the cisco default logging, and at debug/7 level most of those will generate syslog entries.  Don't forget that "show access-list" will show hits counts for the individual entries as well, independently of any syslog output.
Lastly, if a reload is an option, in your situation what I would do if modifying 3k lines was needed is:
  1) copy startup-config a.txt
  2) export a.txt by TFTP or SSH or USB or whatever
  3) edit the configuration using offline tools with regular-expression capabilities such as textpad (windows) or vi or emacs or perl or ...
  4) import the revised b.txt config
  5) copy b.txt startup-config and reload
-- Jim Leinweber, WI State Lab of Hygiene

Similar Messages

  • Enabling ALSB debug level logging

    Within my proxy services I have added some DEBUG level log statements, however, these do not seem to get logged to either my standard out log or my application log. If I switch them to WARN or ERROR, I get them logged.
    I verified in Operational Settings on my proxy service logging is enabled at level DEBUG or above.
    I think something maybe within WLS itself might be preventing the logs. If within the WLS console I switch debug logging on for everything (Debug tab on the server screen), I do see my log statements, among other things. Unfortunately I cannot figure out which one of the hundred or so items actually enables the debug logging just for ALSB's debug statements.
    Has anybody else figured out the right combination of things to get ALSB to log the proxy service debug statements?

    Thanks. That was already enabled but checking it made me think of another thing. I have been watching the console you get when you start up your server from the automatically created shortcuts. Instead, I checked the actual log file for the server and the debug statements do in fact get written there. The console that comes up must be standard error, hence, only the warnings and errors.
    Thanks for leading me to the answer.

  • How do I read in a 1 Hz pwr level file and send it out at 1Hz to the signal generator?

    I would like to be able to read in a 1 Hz file and use the format into string and send it out at 1 Hz to a signal generator to vary the levels to match a timestamp. I was trying to use the format into string but I can't figure out how I could read in this file.
    00:00.0
    -113.586
    00:01.0
    -113.598
    00:02.0
    -113.61
    00:03.0
    -113.622

    If the file is a .csv file as you said in your other post, then you should just be able to use Read From Spreadsheet File, making sure to set the delimiter to comma rather than tab. If it's a small file, you can just read in the whole thing, then use a loop with a Wait For Millisecond Multiple node (the metronome) to send the data once every second.
    If the file is very large, and you don't want to read it all at once, you can tell the Read From Spreadsheet File node to read only one line at a time. Put the read node and the data sending node in the same While loop, and use a shift register to carry the Mark After Read value from one iteration into the Offset or Mark At Start terminal in the next iteration. That way, you start reading each line at the end of the previous one. Use some form of flow control (such as a Stacked Sequence Structure) to make sure things happen in the right order - read data, wait for the right time, send data. 

  • Configuring syslog and generating logs for a particular period.

    Hi...
    I have configured syslog server and the loggin enabled on ASA device... I want to generate the complete logs for a particular period of time. How can I generate this report.. Please help me

    Hello,
    I have an idea how it might work, but it is not certainly the best solution so if you will not find any other, this might work for you.
    Enable sending logs to syslog server:
    logging source-interface loopback    
    logging
    configure EEM script to run "show log" periodicaly:
    event manager applet test
    event timer watchdog name test_name time 60 ! in seconds -> every minute
    action 1.0 cli command "show log"
    Best Regards
    Please rate all helpful posts and close solved questions

  • Sending Logs to Multiple Syslog Servers

    Hi Team ,
    is it doable to send log messages recorded on various cisco devices to multiple syslog servers by discriminating the severity level ?, for example I want to send all the critical and alerts logs to x.x.x.x server, but for other severities, I want to send the logs to y.y.y.y server.
    Thanks.

    Hi Team ,
    is it doable to send log messages recorded on various cisco devices to multiple syslog servers by discriminating the severity level ?, for example I want to send all the critical and alerts logs to x.x.x.x server, but for other severities, I want to send the logs to y.y.y.y server.
    Thanks.

  • Trouble in Syslog Validation (send log)

    I am doing a project to to capture the Syslog from the switches and routers, so for most of devices i can generate the syslog by giving the command " send log" and so that i would receive the same locally as well in the tool.
    Note : These devices are in production.
    We have a monitoring tool " Stablenet v6.72" i think syslog is also the same(same utility in Stablenet)
    The problem iam facing is, for many devices i am not able to give the test command as they are running an IOS c3560-ipbase-mz.122-25.SED1.bin.
    I have configured the syslog server on all the devices and there is reachability and port 514 is opened though,
    I do make you know that we have many firewalls in the network and i belive tat all the devices have reachability to the Syslog server, ( My firewall blocks the Ping traffic and traceroute traffic) so i unable to find out which firewall blocks.( if it is so)
    Please let me know how do i validate remaining 1200 devices. :(
    Please help me,
    Nithin M

    Hi Nithin
    my advice is to issue a command on each device that will initiate a syslog message. At least this way you can be sure its working, since you will always expect the same kind of syslog message. I know for example if you have the syslog severity set to level 5 you will get "configuration change" messages.  To set your level enter this command: 
    'logging trap notifications'
    And then , by entering into config mode ( "conf t" ) as well as exit out of config mode a CONF_I syslog message will be sent immediately as you exit out configuration mode.
    hope it helps.
    Cheers
    Pierre

  • EA4500: how to send logs to syslog or via email?

    Hello,
    I absolutely need to collect the router logs and send them to a syslog daemon or via email.
    How xan I achieve that?
    Thanks

    The router does not have the feature where you can save the logs to a notepad, why not click on Open in Browser and then copy and paste the results to a notepad or wordpad so that you can go ahead and send it thru email.
    Please check link below how to enable logs in the router:
    Title: Enabling the Logs feature of the Linksys Smart Wi-Fi Router using local access
    Article ID: 26579

  • Send logs to syslog

    How to send weblogic server ---- access.log,server.log,server.out to sys log on solaris.

    The router does not have the feature where you can save the logs to a notepad, why not click on Open in Browser and then copy and paste the results to a notepad or wordpad so that you can go ahead and send it thru email.
    Please check link below how to enable logs in the router:
    Title: Enabling the Logs feature of the Linksys Smart Wi-Fi Router using local access
    Article ID: 26579

  • How to configure IPS 4240 - K9 to send log file to syslog server

    I am looking for the commands in how to configure IPS 4240-k9 to send log file to SYSLOG server. If anybody has or came across similer issue please advice.
    Thanks in advanced.

    Ali -
    I am sorry to tell you, but the Cisco IPS Sensors do not send Syslog messages. Your only options for sending signature event information are:
    SDEE (an TLS Encrypted XML formatted message) the sensor is the SDEE Host and your event receiver (MARS, IME, Intelitactics, etc) is the client.
    SNMP Traps - You need to set the "Action" on each signature you want the sensor to send a trap.
    - Bob

  • [svn:bz-trunk] 10057: Update the sample configuration to include a comment to warn people not to use debug level logging in production .

    Revision: 10057
    Author:   [email protected]
    Date:     2009-09-08 10:58:36 -0700 (Tue, 08 Sep 2009)
    Log Message:
    Update the sample configuration to include a comment to warn people not to use debug level logging in production.
    Modified Paths:
        blazeds/trunk/resources/config/services-config.xml

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • Enabling netlogon debug logging

    Windows Server 2008 r2
    i'm trying to isolate the cause of a frequent account lockout and was reading this article
    troubleshooting the PSS way where it suggested to enable netlogon debugging.
    a question comes to mind, if that gets enabled it would surely consume disk space, can the location of the logs be redirected elsewhere?

    What you could try is to limit the log file:
    https://technet.microsoft.com/en-us/library/cc957336.aspx?f=255&MSPPError=-2147217396
    Than if you batch the folliwing lines in a scheduled task and save te location to a network drive. You should be able append it. It would could doubles. But it should not be a problem to filter those out.
    type
    netlogon.log |find /i  "0xC000006A“ >> Z:\badpassword.txt 
     type netlogon.log |find /i  "0xC0000234“ >>Z:\lockedout.txt
    anather solution you could check is :
    http://www.lazywinadmin.com/2013/10/powershell-report-ad-missing-subnets.html

  • Cannot log in to Nationwide internet banking in Firefox. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorer

    Question
    Cannot log in to Nationwide internet banking. I get the front page but Login says internet banking is not working. Next screen says it's ok and sends you back to the first screen, which says it isn't. Works throughInternet explorer

    That issue can be caused by corrupted cookies.
    *https://support.mozilla.org/kb/Cannot+log+in+to+websites
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"

  • How to enable JIT debugging on my Windows 7 (64 bit) computer? I keep getting different Errors popping up on my computer about debugging different programs and that JIT debugging must be enabled!

    How do I enable JIT debugging on my Windows 7 (64 bit) computer? I keep getting different Errors popping up on my computer and the latest one says when I attempted to watch a DVD video with VLC media player but this isn't the first error this week saying
    that JIT debugging must be enabled and I don't know how to do that : ( "Microsoft Visual C++  Runtime Library"  Assertion Failed! Program C:\Program Files (x86) VideoLAN\VLC\vlc.exe  File: vm.c
    Line: 1765
    Expression: pgcit != NULL
    For information on how your program can cause an assertion failure, see the Visual C++ documentation on asserts.
    (Press Retry to debug the application- JIT must be enabled)

    Hi Rhondavas77,
    To enable/disable Just-In-Time debugging
    On the Tools menu, click Options.
    In the Options dialog box, select the Debugging folder.
    In the Debugging folder, select the Just-In-Time page.
    In the Enable Just-In-Time debugging of these types of code box, select or clear the relevant program types:
    Managed, Native, or Script.
    To disable Just-In-Time debugging, once it has been enabled, you must be running with Administrator privileges. Enabling Just-In-Time debugging sets a registry key, and Administrator privileges are required to change that key.
    Click OK.
    More information is here.
    http://msdn.microsoft.com/en-us/library/k8kf6y2a(v=vs.85).aspx
    Best Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • When i try to activate my imessage it just keeps saying veryifing then it stops and send me back to log in screen

    when i try to activate my imessage it just keeps saying veryifing then it stops and send me back to log in screen

    Try:
    iOS: Troubleshooting FaceTime and iMessage activation

  • Full Backups, Level 0 Backups, and Archived Logs

    We have an active Oracle server and a standby Oracle server. We keep the standby database up to date with a cron script. The script tells the active database to do 'alter system switch logfile;'. We then rsync the archived logs to our standby server and have rman apply them.
    This works everyday except Monday (of course!) and it only recently started failing on Mondays. The only change was that our Sunday backups used to be 'Full' backups but are now 'level 0' backups. Ever since that change, the first attempt to apply the archived logs to the standby server after the level 0 is taken on the active server gives us something like this:
    ORA-00308: cannot open archived log
    '/opt/oracle/flash_recovery_area/ORCL/archivelog/2012_04_16/o1_mf_1_60519_%u_.arc'
    ORA-27037: unable to obtain file status
    Of course, the file is not there and doesn't exist on the active server either. And of course, the nightly level1 backups fo not give us problems applying archived logs to the standby database the rest of the week.
    The only way I know to recover from this is to apply the level 0 backup or take a new level 0 and apply it. After that, all subsequent archive logs just work. Any idea why changing from Full to Level 0 would break this? The Oracle docs insist that a Level 0 is identical to a Full except that level 1s can reference them as parents. This simply cannot be true based on what I'm seeing! I really want to keep the level 0 backups in play if possible. Level 1 cumulatives wont be useful without them.

    Here are the RMAN settings:
    CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
    CONFIGURE BACKUP OPTIMIZATION OFF; # default
    CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
    CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
    CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
    CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
    CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
    CONFIGURE MAXSETSIZE TO UNLIMITED; # default
    CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
    CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
    CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
    CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/102/dbs/snapcf_ORCL.f'; # default
    I'm not sure how changing ARCHIVELOG BACKUP COPIES would help. Can you give me a little more information about how that setting comes into play in this situation?
    I actually don't want an archive deletion policy here. We have this done in script three days after the needed archive logs have been applied. Is it possible that the we're deleting archivelogs too soon? Would we ever need to reach back in time to previously applied archive logs to apply new ones?
    The %u does resolve, but this message isn't showing it. Here is that same log entry plus a few previous entries that show it does resolve.
    ORA-00279: change 1284618956 generated at 04/13/2012 15:30:05 needed for thread
    1
    ORA-00289: suggestion :
    /opt/oracle/flash_recovery_area/ORCL/archivelog/2012_04_16/o1_mf_1_60518_%u_.arc
    ORA-00280: change 1284618956 for thread 1 is in sequence #60518
    ORA-00278: log file
    '/opt/oracle/flash_recovery_area/ORCL/archivelog/2012_04_13/o1_mf_1_60517_7rjzox
    0l_.arc' no longer needed for this recovery
    ORA-00279: change 1284618958 generated at 04/13/2012 15:30:05 needed for thread
    1
    ORA-00289: suggestion :
    /opt/oracle/flash_recovery_area/ORCL/archivelog/2012_04_16/o1_mf_1_60519_%u_.arc
    ORA-00280: change 1284618958 for thread 1 is in sequence #60519
    ORA-00278: log file
    '/opt/oracle/flash_recovery_area/ORCL/archivelog/2012_04_13/o1_mf_1_60518_7rjzox
    0x_.arc' no longer needed for this recovery
    ORA-00308: cannot open archived log
    '/opt/oracle/flash_recovery_area/ORCL/archivelog/2012_04_16/o1_mf_1_60519_%u_.ar
    c'
    ORA-27037: unable to obtain file status
    Linux-x86_64 Error: 2: No such file or directory
    Additional information: 3

Maybe you are looking for