Enabling CFS for IIS sites

Hello, can I enable CFS for some sites in IIS and disable it
for others? Or should CFS be enabled for all the sites once it is
installed?
Thanks,

I suppose if you wanted to turn off CF for a particular site
in IIS, you could remove the application extensions.
(Please note - I have not tested this method myself... this is
just an educated guess)
On Server 2003, open IIS, right click on the site in the left
hand window and choose [properties]
Click the [Home Directory] tab
Click the [Configuration] button under the Application
Settings section. The "Application Configuration" menu will appear
Under "Application extensions" scroll down to the .cfc .cfm
and .cfml entries.
Make note of the executable path, then [Remove] all three
entries
If you need to re-create them again later, just [add] the
mappings back through this menu
The executable path is usually
C:\CFusionMX\runtime\lib\wsconfig\jrun_iis6.dll
Verbs: All Verbs
and check the box that says "Script Engine"
Luck!

Similar Messages

How to enable cookies for the site I am on? (WinXP)

I have several questions about cookies. I hope it's OK to post them all at once, rather that each one in a separate topic.
1. Cookie Prompt
I would like to configure FF so that whenever a website tried to store a cookie, FF will prompt me with these options:
a. Always allow.
b. Allow for this session only.
c. Never allow.
Is that possible? If so, what are the settings? If not, is there any chance this will be added at some point? This would make life so much easier. What I do now is copy the URL top the clipboard, then open the Privacy setting dialog and paste the URL into the exceptions window.
I didn't see any way to attach images to this post, so I put a screen shot of my current privacy settings in this DropBox folder:
https://www.dropbox.com/sh/2le075i5wn6maaa/U8ob-Q7FIJ
2. Format of Exceptions
What's the correct format of the entries in the Exceptions dialog? For xyz.com, is it "xyz.com"? "www.xyz.com"? ???
3. Toolbar Icon
Is there a toolbar icon I can add to put the current website in the Exceptions list?
Thanks

To manage cookie exceptions for the site listed in the address bar (a page may contain elements from many servers that all set cookies, this only applies to the main site), you can use the Permissions tab of the Page Info dialog. To open that, you can use any of these:
* right-click > View Page Info > Permissions
* Tools menu > Page Info > Permissions
* click the globe or padlock icon in the address bar > More Information > Permissions
It's a bit more than 1 click...

How to enable cookies for a single web page or site?

How do I enable cookies for just one site or web page, without enabling cookies for ever site?

They should be enabled out-of-the-box, but it's worth checking.
Gingerbread: Menu > More > Settings > "Privacy & Security" section
On newer versions of Android, the menu may be organized differently, but hopefully you can still find Settings.

How do I enable cookies for certain web sites?

How do I enable cookies for certain sites?

Hi mmerritt,
You should take a look at the Knowledge Base article [[Enabling and disabling cookies]]. It will show you how to set an exception so that you can enable cookies for a particular site.
Hopefully this helps!

Enable Flash for only selected sites

Flash implementation sucks and will eventually be replaced by HTML 5 functionality.
Most sites today work without Flash but a few still require them. The ones that do not need flash will in most cases use it anyway if Flash is enabled. To be able to use all sites one has to have Flash enabled for all sites.
To speed Firefox up and be able to migrate away from Flash completely I would like the option to by default have Flash disabled and to manually enable it for certain sites only. This would both speed up the browsing experience and the general migration from Flash to HTML 5.

You can inspect and manage the permissions for all domains on the about:permissions page or for the domain in the currently selected tab by clicking the "Site Identity Button" (globe/padlock) on the location bar and "More Information" to open "Page Info" and go to the Permissions tab.
*https://support.mozilla.org/kb/how-do-i-manage-website-permissions
*Tools > Page Info > Permissions
You can disable click-to-play to be able to select which plugins are allowed on specific web pages (enable, disable, ask). 
Set the plugins.click_to_play pref to true on the about:config page.
*http://kb.mozillazine.org/about:config

Safari for Windows will not log into IIS sites with Windows Authentication

Safari for Windows will not log into IIS sites with Windows Authentication enabled. The IIS log has thousands of login attempts from Safari that result in 401 errors.
I disable Windows Authentication on IIS and it works fine. The problem with that is that my Windows clients stop working properly with seemless logins when I disable this.
The expected behavior is that Safari will work with basic authentication when NTLM does not work. That would result in a password prompt followed by a successful login instead of Safari stopping at "Loading" while hammering the IIS logs.
It does this on all machines that I have tried.
Any ideas or is this a bug?

I noticed that as well. I have to wonder if it's due to not making note of the the different end of line characters between Mac OS X and Windows in code.

Site to Azure replication - always get errors when trying to enable protection for a virtual machine

I just setup my Azure account with Storage and Azure Site Recovery.
All the servers are registered and I can see my host server configurations in Azure.
But as soon as I can try to Enable Protection, after about 10 minutes I always get this error
Unable to complete the request. Operation on the xxx.xxx.local server timed out.
Try the operation again. (Provider error code: 2924)
(But the way the xxx.xxx.local server is the name of the underlying Hyper-V host running SCVMM and my test machine to be protected. Is that the right machine Azure should be communicating with?)
This happens if I initiate the protection from Azure or from SCVMM.
The server I want to enable protection for is quite small and there appears to be no problem with my Internet connection.
Prerequisites check
Identifying replication target work okay
And after the failure, Updating Provider states also completes okay
Would folks have an idea where else I could be looking?
Thanks

Hi, can you please check if network proxy settings configured in the Microsoft Azure Recovery Services Agent are correct. This agent running on the Hyper-V host needs to be able to reach Azure. (You can find more details about this here: http://blogs.technet.com/b/virtualization/archive/2014/07/07/azure-site-recovery-authenticated-proxy-server.aspx)
If that is correct, please look at event logs at “Applications and Services Logs->MicrosoftAzureRecoveryServices->Replication” and
traces at a location like C:\Program Files\Microsoft Azure Recovery Services Agent\Temp.
Sudhakar [MSFT]

IIS Site migration to Plesk

Hello, I have my IIS web server running on a Windows 2008 machine. I want to migrate one of the SSL sites(which has its database running on Mircosoft SQL server 2008r2) to another server because of the huge traffic and logs it generate. The new server
that I've got had IIS,sql server 2012 and Plesk panel already installed. When I tried restoring the data and databases, it doesn't show up. I've installed .net framework 4 and mvc 3 since its a .net site. But it just doesn't load, shows a blank page, and when
I tried to browse the foler using localhost, it showed 403 forbidden error and the issue might be with default document or directory listing. I enabled directory listing and checked the default document, but there's nothing. Does this have anything to
do with Plesk being installed, because even the default iis site shows the Plesk panel. Please help asap.
pf

Hi pf,
About the 403 forbidden error, it seems to be plesk issue. Please refer to the document which might help you resolve the issue:
http://knowledge.3essentials.com/web-hosting/article/1120/Access-is-denied.-Exception-from-HRESULT-0x80070005-E_ACCESSDENIED-Error-with-Plesk-9.5.html
If not working, I suggest you could enable Failed Request tracing in iis to troubleshoot it. For more information, please refer here
http://www.iis.net/learn/troubleshoot/using-failed-request-tracing/troubleshooting-failed-requests-using-tracing-in-iis
If the issue persists, as other mentioned, you post in IIS forums for better support.
Regards.
Vivian Wang

Office Web Apps Server IIS site disappeared?

I deployed an Office Web Apps server on a dedicated VM to be used for Lync 2013. After the initial installation / set up, I confirmed the discovery URL. It worked fine.
However, after one point in time, PowerPoint Presentations stopped working. When trying to share a PPT presentation, the Lync client popped up a message saying "Sorry, we couldn't upload <ppt file name> because we're having trouble connecting
to the service. If this keeps happening, try contacting your support team". I've done many many Lync and Office Web Apps install myself previously, and never had a message pop up like the one I saw in this case.
I tried going to the Web Apps discovery URL again, and it didn't get anywhere. I got on the Web Apps server and all the IIS sites were wiped.
I tried uninstalling the Office Web Apps server and reinstalling, but from that point on, IIS sites for Web Apps just would not appear under IIS manager.
Has anyone had similar issue with Office Web Apps?
Thanks,
Andrew Shin, TechNet Forum replies

Hello,
Maybe the windows update is active and configured to Automatically download and installed update of Office Web Apps and this behavior just breaking your setup.
Try
remove the farm of WAC
Install SP1
and start new deployment of farm.
Link SP1
http://www.microsoft.com/en-us/download/details.aspx?id=42547
How update your farm Office Web Apps
http://technet.microsoft.com/en-us/library/jj966220(v=office.15).aspx
Hugs[]s
Robson Hasselhoff - Follow me @Robk9e

SharePoint 2013: A web analytics report is not available for this site.

Hello,
I have SharePoint Server 2013 and the enable usage data collection is enabled. There is usage logs and data being generated, but SharePoint says there is not data available.
A web analytics report is not available for this site. Usage processing may be disabled on this server or the usage data forthis site has
not been processed yet.
What can I do?
Thanks,
Paul
Paul

hi,
Web Analytics is now part of the 2013 Search.
You can refer the below links, :
http://blogs.msdn.com/b/chandru/archive/2013/08/31/sharepoint-2013-web-analytics-report-where-is-it.aspx
http://www.collabshow.com/2013/05/23/sharepoint-2013-analytics-a-big-step-backward/
http://usamawahabkhan.blogspot.com/2013/06/sharepoint-2013-analytics-features-how.html
if you wanna use API, there is a blog,which talk about the same:
retrieve Search Analytics Reports
using SharePoint 2013 API:
http://radutut.wordpress.com/2013/01/27/how-to-get-search-analytics-reports-programmatically-in-sharepoint-2013/

Sharepoint warmup script for https sites

we want to warm up https site which is based on sharepoint 2010.
When we run some sample powershells it shows access forbidden error so we are not able to warm up https site.
Its slow on first load so need some warmup script for https sites.
sharepointer

Just ensure that the service account that you use to trigger the Powershell scripts has access to IIS and SharePoint. Most often, the SharePoint Farm account would be used for scheduling the warm up scripts on the WFE server.
I trust that answers your question...
Thanks
C
http://www.cjvandyk.com/blog

Internet connexion problem for remote site in Site to site VPN asa 5505

Hi all
I'm configuring a site to site Ipsec VPN in 2 sites using ASA 5505 V 8.2, The VPN is working fine i can ping machine in the 2 sides but the problem is the remote site dont' have internet.
The architecture is, we 2 site Site1 is the main site and Site2 is secondary site there will be Site3, ...
The internet connection is based in Site1 and site2 and site 3 will have internet connection through Site1. Site1, Site2 and Site 3 is interconnected by Ipsec VPN.
Here is my ASA 5505 Configuration :
SITE 1:
ASA Version 8.2(5)
hostname test-malabo
domain-name test.mg
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd ta.qizy4R//ChqQH encrypted
names
interface Ethernet0/0
description "Sortie Internet"
switchport access vlan 2
interface Ethernet0/1
description "Interconnexion"
switchport access vlan 171
interface Ethernet0/2
description "management"
switchport access vlan 10
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.1.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 41.79.49.42 255.255.255.192
interface Vlan10
nameif mgmt
security-level 0
ip address 10.12.1.100 255.255.0.0
interface Vlan171
nameif interco
security-level 0
ip address 10.22.19.254 255.255.255.0
ftp mode passive
dns server-group DefaultDNS
domain-name test.mg
object-group network LAN-MALABO
description LAN DE MALABO
network-object 192.168.1.0 255.255.255.0
object-group network LAN-BATA
description LAN DE BATA
network-object 192.168.2.0 255.255.255.0
object-group network LAN-LUBA
description LAN DE LUBA
network-object 192.168.3.0 255.255.255.0
access-list interco_1_cryptomap extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.1.0 255.255.255.0 192.168.3.0 255.255.255.0
pager lines 24
mtu inside 1500
mtu outside 1500
mtu mgmt 1500
mtu interco 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
icmp permit any inside
icmp permit any outside
icmp permit any interco
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
nat (interco) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 41.79.49.1 1
route interco 192.168.3.0 255.255.255.0 10.22.19.5 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map interco_map0 1 match address interco_1_cryptomap
crypto map interco_map0 1 set pfs group1
crypto map interco_map0 1 set peer 10.22.19.5
crypto map interco_map0 1 set transform-set ESP-3DES-SHA
crypto map interco_map0 interface interco
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto isakmp enable interco
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 192.168.1.0 255.255.255.0 inside
telnet 10.12.0.0 255.255.0.0 mgmt
telnet timeout 30
ssh 192.168.1.0 255.255.255.0 inside
ssh 10.12.0.0 255.255.0.0 mgmt
ssh timeout 30
console timeout 0
management-access interco
dhcpd option 3 ip 192.168.1.1
dhcpd address 192.168.1.100-192.168.1.254 inside
dhcpd dns 41.79.48.66 8.8.8.8 interface inside
dhcpd enable inside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password eY/fQXw7Ure8Qrz7 encrypted privilege 15
tunnel-group 10.22.19.5 type ipsec-l2l
tunnel-group 10.22.19.5 ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 60 retry 5
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect dns
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect snmp
inspect icmp
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:5aa0d27f15e49ea597c8097cfdb755b8
: end
SITE2:
ASA Version 8.2(5)
hostname test-luba
domain-name test.eg
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
description "Sortie Interco-Internet"
switchport access vlan 2
interface Ethernet0/1
description "management"
switchport access vlan 10
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 192.168.3.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address 10.22.19.5 255.255.255.0
interface Vlan10
nameif mgmt
security-level 0
ip address 10.12.1.101 255.255.0.0
ftp mode passive
dns server-group DefaultDNS
domain-name test.eg
object-group network LAN-MALABO
description LAN DE MALABO
network-object 192.168.1.0 255.255.255.0
object-group network LAN-BATA
description LAN DE BATA
network-object 192.168.2.0 255.255.255.0
object-group network LAN-LUBA
description LAN DE LUBA
network-object 192.168.3.0 255.255.255.0
access-list outside_1_cryptomap extended permit ip 192.168.3.0 255.255.255.0 192.168.1.0 255.255.255.0
access-list inside_nat0_outbound extended permit ip 192.168.3.0 255.255.255.0 192.168.1.0 255.255.255.0
pager lines 24
mtu inside 1500
mtu outside 1500
mtu mgmt 1500
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside) 0 access-list inside_nat0_outbound
route outside 0.0.0.0 0.0.0.0 10.22.19.254 1
route outside 192.168.1.0 255.255.255.0 10.22.19.254 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
aaa authentication ssh console LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
crypto map outside_map0 1 match address outside_1_cryptomap
crypto map outside_map0 1 set pfs group1
crypto map outside_map0 1 set peer 10.22.19.254
crypto map outside_map0 1 set transform-set ESP-3DES-SHA
crypto map outside_map0 interface outside
crypto ca trustpoint _SmartCallHome_ServerCA
crl configure
crypto ca certificate chain _SmartCallHome_ServerCA
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet 10.12.0.0 255.255.0.0 mgmt
telnet timeout 30
ssh 192.168.3.0 255.255.255.0 inside
ssh 10.12.0.0 255.255.0.0 mgmt
ssh timeout 30
console timeout 0
management-access outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
username admin password eY/fQXw7Ure8Qrz7 encrypted privilege 15
tunnel-group 10.22.19.254 type ipsec-l2l
tunnel-group 10.22.19.254 ipsec-attributes
pre-shared-key *****
isakmp keepalive threshold 60 retry 5
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect ip-options
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
service-policy global_policy global
prompt hostname context
call-home reporting anonymous
call-home
profile CiscoTAC-1
no active
destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
destination address email [email protected]
destination transport-method http
subscribe-to-alert-group diagnostic
subscribe-to-alert-group environment
subscribe-to-alert-group inventory periodic monthly
subscribe-to-alert-group configuration periodic monthly
subscribe-to-alert-group telemetry periodic daily
Cryptochecksum:185bd689118ba24f9a0ef2f7e80494f6
Can anybody help why my remote site can't connect to Internet.
REgards,
Raitsarevo

Hi Carv,
Thanks for your reply. i have done finally
i used no crypto ipsec nat-transparency udp-encapsulation in my end router only.
and in remote access VPN i have enabled UDP for client configuration. the most imprtant is i have given IP add of same LAN pool to VPN user,
Regards,
Satya.M

How to configure webserver plugin for IIS to fwd request to multiple server

Hi,
Have configured Sun One webserver plugin for IIS is configured as per the documentation - http://docs.sun.com/source/816-7156-10/agplugin.html
Have a requirement to forward the request to three different servers
Eg : http://www.host1.com/app1
http://www.host2.com/app2
http://www.host3.com/app3
Getting bad gateway error when this is configured in sun-passthrough.properties file
serverpool1.server=http://www.host1.com
serverpool1.passthrough=/app1
serverpool2.server=http://www.host2.com/
serverpool2.passthrough=/app2
Is this configuration wrong?
Thanks

First, set the user back to www or whatever it was. To do namebased virtual hosting, you'll need to change two things. The first is to add a NameVirtualHost directive to /etc/httpd/sites/virtualhostglobal.conf
This is one of the VirtualHost stanzas from my Linux box, you just have to adjust the paths for your machine:
<VirtualHost www.mydomain.com>
ServerAlias mydomain.com
ServerAdmin [email protected]
DocumentRoot /usr/people/httpd/html/www
<Directory /usr/people/httpd/html/www>
Options Includes
AllowOverride AuthConfig
</Directory>
ScriptAlias /bin /usr/people/httpd/cgi-bin/www
ScriptAlias /cgi-bin /usr/people/httpd/cgi-bin/www
</VirtualHost>
Restart Apache and you should be good to go. If there are errors, could you post them from /var/log/httpd/error_log ?
Roger

My iPod touch was stolen and recovered. I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly

My iPod touch was stolen and recovered. I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate

If the thief enabled activation lock on the device, then there is nothing that can be done. Only the password for the Apple ID that it is locked with can disable activation lock.

Mobile Url for a site gives an error

when i try to access the mobile site of a SharePoint 2010 site it gives me the following error:
<input name="__EVENTARGUMENT" type="hidden" /> Error
Object reference not set to an instance of an object.
The mobile Url contains _layouts/mobile/mblwiki.aspx this site has wiki feature enabled

Hi Omar,
According to your description, my understanding is that the error occurred when you access the mobile URL for SharePoint site.
I recommend to append "?Mobile=1" to the end of the URL of the SharePoint site
to access the mobile view to see if the issue still occurs, such as
http://MyServer/MySite/default.aspx?Mobile=1.
If the error still occurs, I recommend to check if the mobile view is activated for SharePoint.
http://technet.microsoft.com/en-us/library/ff393832(v=office.14).aspx
More reference:
http://msdn.microsoft.com/en-us/library/office/ms462572(v=office.14).aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Enabling CFS for IIS sites

Similar Messages

Maybe you are looking for