Enabling/Hiding Services in ESS

Hi All,
My requirement is to enable/ hide some services based on company code in ESS.
I want to know is it possible in portal. If yes, request you to let me know how can i achieve this.
Thanks,
Santosh

Hi ,
Just the the below steps to enable or hide service in ESS.
Step 1,Activate Appintegrater to enable ABAP service configuration.
Goto System admin ->System config ->service configuration ->Application - >drill down " com.sap.portal.appintegrator" - > Right click on Common_Configuration - click on configure - > set true for Use_customerEXIT_parameterProvider. than go back to com.sap.portal.appintegrator right clidk and click on Administration and do Restart.
Step 2.Employee Self-Service Web Dynpro ABAP - > iViews - > Navigation Services - > Overview ( Right Click) Preview
U will see the ESS Page.
Step3 : Right click we will see option setting for current configuration.Here u can do u UI level customization.Instead of doing in LPD_CUST Tcode in ECC.
Wtih regards
Seranjeeve Kumar

Similar Messages

Hide certain services in ESS and MSS

Dear friends
We want to hide certain services in ESS and MSS we are on ECC 6.0 and EP 7.0
In ESS career and job, purchasing, work environment, life and work events, corporate information
In MSS we want to hide Budget, Projects, Planning
In Team also we want to hide services like employee working time (approve time sheet data), performance management, competency management, hcm process and forms, in recruitment (create new candidate assessment), organization
Please let me know where and how to hide these services in ESS and MSS
Thank you

Hello,
For hiding the links in both ESS and MSS, you need to make changes in Home Page Framework.
For this go to transaction SPRO and navigate to
Cross-Application Components - Home page Framework.
I suggest not to delete the standard one instead see and create new iView with new parameters.
Hope this helps.
Cheers-
Pramod

Unable to call WSS (WS-Security) enabled Web Service using UTL_DBWS

We are attempting to call a WSS (WS-Security) enabled Web Service from PL/SQL using the UTL_DBWS package (see [http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_dbws.htm#CHDIDGJH] ). We are doing this in similar fashion to [http://www.oracle-base.com/articles/10g/utl_dbws10g.php] with calls to utl_dbws.create_service, utl_dbws.create_call and utl_dbws.invoke.
Using this method we can successfully call an unsecured Web Service, but calls to WSS-enabled Web Services fail. We are currently using Oracle Database 10.2.0.3.
The failure we are getting is:
ORA-29532: Java call terminated by uncaught Java exception: javax.xml.rpc.soap.SOAPFaultException:
com.sun.xml.wss.XWSSecurityException: Message does not conform to configured
policy ( AuthenticationTokenPolicy(S) ): No Security Header found;nested
exception is com.sun.xml.wss.XWSSecurityException:
com.sun.xml.wss.XWSSecurityException: Message does not conform to configured
policy ( AuthenticationTokenPlicy(S) ): No Security Header found
Apparently UTL_DBWS does not support calling WSS enabled services, although this doesn't appear to be an officially recognised position. Does anyone know if Oracle are planning to support this soon (if ever)? Looking at Re: Calling WS from PL/SQL using WS-security suggests that support has been considered before, but not yet realised.
Thanks,
Tom

Having raised a Service Request with Oracle support on this, I got the following response from Oracle Development (On unpublished bug [8542959|https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=BUG&p_id=8542959]):
Development has confirmed that WS-Security is not supported through UTL_DBWS. They have also acknowledged that this is not documented and they will change the official Oracle documentation will reflect this fact. From what is being stated, it would appear that there is no plan to support the use of WS-Security through UTL_DBWS in any release in the near future.
So, in short, without developing your own home-grown SOAP request, there is no way to call a WSS enabled web service from within PL/SQL.
-Tom

Jabber for Mac 9.2 - Enable Differentiated Services?

In Preferences>Calls>Advanced there is a setting called Enable Differentiated Services for Calls.
What does this setting actually do? I cannot find the setting referenced in any Jabber Mac docs on CCO.

Cisco SE confirmed "no BFCP for Jabber for Mac 10.0 using IM&P 10x, this feature is not committed"

Error while accessing services of ESS/MSS tabs - URGENT

Hi,
When i am accessing the services under ESS, MSS tabs ie, Leave request, My expenses etc.... i am getting the following error.
A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
Please contact your system administrator.
User XYZ does not exist in this period:
com.sap.pcuigp.xssfpm.java.FPMRuntimeException: User XYZ does not exist in this period
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:111)
     at com.sap.pcuigp.xssfpm.java.MessageManager.raiseException(MessageManager.java:121)
     at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.initPernr(FcEmployeeServices.java:257)
     at com.sap.pcuigp.xssutils.pernr.FcEmployeeServices.onInit(FcEmployeeServices.java:220)
     at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServices.onInit(InternalFcEmployeeServices.java:249)
     at com.sap.pcuigp.xssutils.pernr.FcEmployeeServicesInterface.onInit(FcEmployeeServicesInterface.java:135)
     at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface.onInit(InternalFcEmployeeServicesInterface.java:183)
     at com.sap.pcuigp.xssutils.pernr.wdp.InternalFcEmployeeServicesInterface$External.onInit(InternalFcEmployeeServicesInterface.java:243)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.xss.tra.fc.utils.FcTraUtils.onInit(FcTraUtils.java:264)
     at com.sap.xss.tra.fc.utils.wdp.InternalFcTraUtils.onInit(InternalFcTraUtils.java:297)
     at com.sap.xss.tra.fc.utils.FcTraUtilsInterface.onInit(FcTraUtilsInterface.java:122)
     at com.sap.xss.tra.fc.utils.wdp.InternalFcTraUtilsInterface.onInit(InternalFcTraUtilsInterface.java:212)
     at com.sap.xss.tra.fc.utils.wdp.InternalFcTraUtilsInterface$External.onInit(InternalFcTraUtilsInterface.java:428)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.xss.tra.fc.allmytrips.FcTraAllMyTrips.onInit(FcTraAllMyTrips.java:247)
     at com.sap.xss.tra.fc.allmytrips.wdp.InternalFcTraAllMyTrips.onInit(InternalFcTraAllMyTrips.java:543)
     at com.sap.xss.tra.fc.allmytrips.FcTraAllMyTripsInterface.onInit(FcTraAllMyTripsInterface.java:115)
     at com.sap.xss.tra.fc.allmytrips.wdp.InternalFcTraAllMyTripsInterface.onInit(InternalFcTraAllMyTripsInterface.java:348)
     at com.sap.xss.tra.fc.allmytrips.wdp.InternalFcTraAllMyTripsInterface$External.onInit(InternalFcTraAllMyTripsInterface.java:420)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:889)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1082)
     at com.sap.xss.tra.vc.allmytrips.VcTraAllMyTripsInterface.onInit(VcTraAllMyTripsInterface.java:164)
     at com.sap.xss.tra.vc.allmytrips.wdp.InternalVcTraAllMyTripsInterface.onInit(InternalVcTraAllMyTripsInterface.java:205)
     at com.sap.xss.tra.vc.allmytrips.wdp.InternalVcTraAllMyTripsInterface$External.onInit(InternalVcTraAllMyTripsInterface.java:399)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:563)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:437)
     at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:195)
     at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
     at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:429)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:700)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:269)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:772)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:707)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
     at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
     at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
     at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1248)
     at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:353)
     at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:551)
     at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:595)
     at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:826)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
     at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
     at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
     at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:723)
     at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
     at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
I am able to access in QAS but not in DEV or Prod.

VV,
This could be case when the payroll for the user XYZ has not be updated till the current period, in which you are trying to access the ESS or MSS tabs.
You can try this.
1. Go to the transaction - PC00_mxy_CLSTR
where xy refers to the MOLGA or the country coding for which the payroll is run.
Observe there till which period for the user XYZ the payroll has been run.
2. If the payroll has not been run for the current period.
Go to transaction PC00_mxy_CALC and by entering the parameters, run the payroll and try doing the same.
Hope this helps!
Regards.
Sandeep Tudumu

Failed boot after enabling devmon service with systemctl

I've recently reinstalled Arch and in trying to get a proper automount solution working I was playing with udevil and devmon. First I disabled and uninstalled ldm, which wasn't working as I wanted. Then installed udevil via pacman. I couldn't find proper instructions at first so I ran:
# systemctl enable [email protected]
and then rebooted. But that didn't work. Then I found something saying to run:
# systemctl enable [email protected]
So I disabled devmon@ and enabled devmon@MYUSERNAME then rebooted.
As the system was shutting down it seemed to get stuck at a part about trying to save a random seed. I walked away for 10 minutes but when I came back nothing had changed so I hit the hard reset button. As it rebooted I could just barely see a whole lot of red [FAILED] signs flashing past my screen. When the screen comes to rest I am greeted by this. Once it gets to this point it doesn't accept any input from the keyboard except for Ctrl-Alt-Del which seems to cleanly reboot.
So far I've booted my arch install cd and run the following on all my partitions along with trying the -p, -r and -a options.
# fsck /dev/sda2
Nothing I ran seemed to produce any output that would suggest there are any problems or anything like an error code 8, which I've read elsewhere is an operational error, whatever that means.
Next I read up about chroot and gave that a go. I chrooted into my arch install and decided to disable the devmon@MYUSERNAME service and uninstall udevil incase that was interfering somehow. I also checked out the journalctl per the screenshots instructions but didn't really understand it. Also not sure on where that log information is stored so I can upload it here.
Any help would be appreciated.
Last edited by greatant (2013-06-11 11:02:07)

I've not made any progress with this issue. I've decided it has to do with the random seed, but I can't find any information on it via ArchWiki, searching the forum or google.

I am unable to re-enable bonjour services to view my shared library on my PC from my Mac

I am unable to view my shared music library from my Mac on my PC (running Windows 7). When I check in the sharing preferences, it says "The Bonjour services has been disable. Bonjour is required to share music with others. Please re-enable the service to use this feature." Yet when I check the services in the system configuration, it says that Bonjour is enabled and running. I have also checked in the msconfig and it says Bonjour services are running. I have also performed a complete reinstall of iTunes and that did not help. I'm looking for a solution. Thanks.

hello,
You mean you can open firefox but cannot connect to the internet?
Or you just cant open firefox?

How to Remove & Re-Enable Web Services on LaserJet printers supporting ePrint

If your LaserJet printer has been disconnected from or failed to connect to Web Services, you may need to power cycle your printer to reconnect. If that does not resolve the problem, you can remove web services, wait 30 seconds, then re-enable web services to re-establish your connection to ePrint and Print Apps. Note: this last step will result in a new email address being assigned to your printer.
How do I remove HP Web Services for my LaserJet printer?
Print a configuration page from your product, and locate the IP address.
At your computer, open a Web browser and type the product IP address into the address line and press Enter. The HP Embedded Web Server opens.
Click the HP Web Services tab.
Select the option to disable Web Services.
How do I enable or re-enable HP Web Services for my LaserJet printer?
To use HP ePrint, you must first enable HP Web Services. Re-Enabling Web Services uses the same procedure as enabling the Web Services.
Print a configuration page from your product, and locate the IP address.
At your computer, open a Web browser and type the product IP address into the address line and press Enter. The HP Embedded Web Server opens.
Click the HP Web Services tab.
Select the option to enable Web Services.
When Web Services are enabled, ePrint information appears in the HP Embedded Web Server. Look for the e-mail address that is automatically assigned to the product. The product also prints an HP Web Services information sheet that contains this e-mail address and instructions
If you were unable to register your printer in www.hpeprintcenter.com within 24 hours of printing your information sheet, you must re-enable the printer code by reprinting your information sheet. The information sheet will also provide your email address if you have forgotten it.
How do I print the Web Services Information Sheet for my LaserJet printer?
You can only add the printer to your HP ePrintCenter account within 24 hours after printing the information sheet. You can re-print the information sheet at any time from the printer control panel.
Print a configuration page from your product, and locate the IP address.
At your computer, open a Web browser and type the product IP address into the address line. The HP Embedded Web Server opens.
Click the HP Web Services tab.
Click the Print Information Sheet button.
I am an HP employee.

To help improve the organization and information sharing in this forum this post/discussion has been closed and replaced.
Please see this post: <link to new “Enable Disable Web Services on your printer” post.
If after reviewing the post above you still have questions/issues with your web-connected printer, you can either review and comment in existing posts in this forum that report issues like yours, or if necessary start a new post requesting assistance.
Miles
HP Employee

HT5594 After updating to iOS7 on my iPhone4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

After updating to iOS7 on my iPhone 4 I cannot enable location services. How do I enable location services? I have tried turning off restrictions but that did not work.

I finally just resolved this after not being able to enable location services since upagrading to iOS 7. Posting the solution here 'cause I couldn't find it anywhere else.
I enabled Restrictions under Settings > General > Restrictions and created a passcode (I'm not sure if this was part of the solution, but it wasn't enabled for me by default.)
In Restrictions, under Privacy, Location Services was set to "Allow Changes" (This still didn't solve the issue of the greyed-out Location Services switch though - I still couldn't turn it on.)
Also in Restrictions, I also switched "Find My Friends" to "Allow Changes"
Once I did step 3, the switch under Settings > Privacy > Location Services was no longer greyed out and could be switched on.
Hope this helps!

I can't get paddy power app to open after enabling location services?

i have reinstalled twice. keeps telling me to enable location services. have done several times and restarted. also cleared cache. same problem with betfair app. ipad 3 and latest iOS.

Sounds like a Codesign issue. From terminal, type:
codesign -vvv /Applications/iTunes.app/
You should see:
/Applications/iTunes.app/: valid on disk
/Applications/iTunes.app/: satisfies its Designated Requirment
But if you see:
/Applications/iTunes.app/: a sealed resourse is missing or invalid
[lists reources]
You can either delete the offending resouces (risky) or try redownloading and reinstalling the latest iTunes.dmg from Apple. Try the reinstall first.

Adding Silverlight-enabled WCF Service failed with error code 50

Hello everyone,
I am very new to Silverlight ,and I am working on silverlight with WCF.
When I tried to add a silverlight-enabled WCF service. I kept getting the error
Method failed with unexpected error code 50.
I am working with Silverlight 5 and VS 2013 ,I have no idea about it. I appreciate that if anyone can help?
Thank you

Hi,
Please make sure your wcf is valid.
Here are some resources which could help you:
https://msdn.microsoft.com/library/cc838234(VS.95).aspx
http://www.codeproject.com/Articles/262164/Using-WCF-Service-with-Silverlight#_articleTop
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

TS1368 itunes and app store say cannot connect - I reset all the settings, enabled location services so the

I reset all the settings, enable location services so time and date would be auto, update iOS, re-entered network key - cannot connect to app store continues

You must not be connected to the internet via wifi.
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Blank page displaying when clicking on the service in ESS

Hi All,
MyExpenses & Leave Request services under ESS is displaying blank page when i log into the portal with test user. When i log in with my user id , both are opening and working properly.
all the remaining services are working properly. for some users, it is working properly and for some users it is displaying blank page.
To work the service properly with the test user, what properties or authorizations i have to set in portal / backend.
pls post answers. This is the third time i am posting this question. I did not get answers for this... its very urgent issue.
Regards,
Vila.

Hi,
The problem seems to be due to lack of proper authorisation.
Go to Portal content->Contents provided by SAP->Open the permission editor of the folder 'End User Content'.
Therein enter eu_role and check the box corresponding to the end-user. Now assign the users eu_role and ESS role.
If everyone is going to use ESS, then 'End User content' to the Group 'Everyone' with read access and then assign the ESS role to the 'Everyone' group.
Hope this helps !
Regards
Srinivasan T

How can i enable ldap service in my system?

How can i enable ldap service in my system?while running my prgram i am getting an error connection refused why?

hi
thanks for u r kind attention.
i want execute simple jndi program on WinXPwhich uses ldap sevices.
in the JNDI Tutorial it is given that u can make use of ldap service provided by JDK.i am using a latest version of jdk.
where the programs for enabling ldap sevice is located in JDk ?how can i enable it?
and also i have down latest releases of openLDAP software?if the earlier is not possible u tell me how to configure openLDAP?
thanks in advance

Calling a WSSE Enabled Web Service Through a Java Proxy Class

I am trying to create a client that can access a WSSE enabled web service through
the generated java proxy. For now all I am asking for in the .wsse file is the
username and password with the line <token tokenType="username"/>. In the client
I am setting the username and password token exactly as the BEA documentation
describes:
UserInfo ui = new UserInfo("myuser", "mypassword");
session.setAttribute(WSSEClientHandler.REQUEST_USERINFO, ui);
Yet I am getting the following error message when I try to run the client:
java.rmi.RemoteException: SOAP Fault:javax.xml.rpc.soap.SOAPFaultException:
EJB Exception: ; nested exception is:
com.bea.wlw.runtime.jws.wssecurity.exception.WLWWSSEException: Policy
requires Message to contain UsernameToken, UsernameToken not found in the Message.
Can anyone tell me what I am missing?
Thanks,
John

Hi John,
In your standalone client, use the following two properties to send a
user name and password to the service so that the client can
authenticate itself: javax.xml.rpc.security.auth.username
javax.xml.rpc.security.auth.password
See the docs [1]
Hope this helps,
Bruce
[1]
http://edocs.bea.com/wls/docs81/webserv/security.html#1073863
John H wrote:
>
I am trying to create a client that can access a WSSE enabled web service through
the generated java proxy. For now all I am asking for in the .wsse file is the
username and password with the line <token tokenType="username"/>. In the client
I am setting the username and password token exactly as the BEA documentation
describes:
UserInfo ui = new UserInfo("myuser", "mypassword");
session.setAttribute(WSSEClientHandler.REQUEST_USERINFO, ui);
Yet I am getting the following error message when I try to run the client:
java.rmi.RemoteException: SOAP Fault:javax.xml.rpc.soap.SOAPFaultException:
EJB Exception: ; nested exception is:
com.bea.wlw.runtime.jws.wssecurity.exception.WLWWSSEException: Policy
requires Message to contain UsernameToken, UsernameToken not found in the Message.
Can anyone tell me what I am missing?
Thanks,
John

Enabling/Hiding Services in ESS

Similar Messages

Maybe you are looking for