Enchancements for sales order header

HI,
I have created a new field Backorder Reason in the additional data tab B (Screen number 8309) for the sales order header.The new field is of input/output field.The new field should be able to select the values and save the sales order.I have done upto here.
Could any one please suggest how to disabled this field only for the Tcode 'VA03'.
It should be enabled for Tcode 'VA01'.
Thanks,
Nagendra

Hi...
try to capture through which transaction user is executing(VA01, VA02, or VA03). write IF condition like if transaction code is not "VA03" then display.
Regards
KP.

Similar Messages

Enchancements for sales order header - VA01

Hi,
Could any one suggest is it possisble to enhance the additional data tab B(Screen number 8309) of the sales order header like below mentioned.If its possisble please suggest the procedure.
I need to create a new field in the screen number 8309 of VA01 with drop down box, a possisble list of 7 entries to be provided and if cursor is placed on a value of the list a box(item Box) should be open with the list of possisble values again like this there will be 3 items box and finally the user should be able to select the field and save it.
For EX just like Go->header->Additional functions->Additional data B.
Regards,
Nagendra

Hi Nagendra,
First append the requisite custom field in the structure of VBAK (since the Additional Tab B is for Header data).
Go to screen number 0312 in program SAPMV45A and develop the screen layout along with the Custom Field of VBAK structure, as it is done in normal module pool programming.
Then in the PAI and PBO section of the screen define PAI and PBO modules or use the already defined modules.
Then double click on the module and create the modules in Inlcudes MV45AOZZ (PBO) and MV45AIZZ (PAI). Write your requisite code in the created PAI and PBO modules.
In case the screen field name does not match with the table field name (e.g., let us say that the custom field in table VBAK is "ZZCUSTOM" and the screen field is "CUSTOM1"), the field value from the structure/table (i.e., assign VBAK-ZZCUSTOM to the screen.) has to be assigned to the screen field (CUSTOM1) in the PBO module and in the PAI module the value from the screen field has to be assigned back to the structure/table field.
In PAI : VBAK-ZZCUSTOM = CUSTOM1.
IN PBO : CUSTOM1 = VBAK-ZZCUSTOM.
But if the screen field name is VBAK-ZZCUSTOM then the above assignments need not to be done. It will be handled by the system itself.
As for the list box, while defining the screen layout, define the field property as list box.
But I dont think that the second list of possible entries is not possible by using listbox.
Instead you can do define a normal F4 help for the 1st list of possible entries. Then when the user selects a entry you can call a modal screen (i.e., pop up screen) with the 2nd list of possible values. When a user selects a entry from this list you can put that value in the screen field.
Hope this helps.
Regards,
Abhisek.

Table Name for Sales Order Header Text.

Hi.
Whats the Table name for Sales Order Header Text???
Reg,
Amol

Hi Amol,
please Try to check the below link
http://scn.sap.com/thread/1361272
http://scn.sap.com/thread/416757
https://scn.sap.com/thread/1909247
https://scn.sap.com/thread/811915
Regards,
Gurunath

How to create a sap script for sales order header items?

Hi friends i am totally new to scripts i have got a task where i have to create a sap script for sales order header items details, the clue that i have got is to create using MEDRUCK but i have got no idea please can any body help me with this task with any sample sap script?
Points will be rwwared with out fail Thks in advance.

Hi,
The Standard Form NAme is RVORDER01
Regards
Sandipan

Bdc for sales order header text

we need to write a bdc program for va01. In that we need to
upload header text also .
So please kindly tell me how to upload flat file to va01 along with
header text.And how we need to declare the flat file.
if it is not possible through bdc then tell me how to do with bapi.
thank you so much for all the replies

Hi,
Using BDC, You can not uplaod sales order header text. You can upload the header text using FM
CREATE_TEXT.
Here giving sample code. This code is written for Material master text. You change this code according to your requirement
REPORT ZMM_INSERT_LONGTEXT.
*Internal table to hold long text...
DATA:
BEGIN OF T_UPLOAD OCCURS 0,
    MATNR LIKE MARA-MATNR,             " Material number
    ID(2) TYPE C,                      " Identification
    LTEXT LIKE TLINE-TDLINE,           " Long text
END OF T_UPLOAD,*Internal table to hold long text....
T_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE.DATA:
   W_GRUN LIKE THEAD-TDID ,            " To hold id
   W_OBJECT LIKE THEAD-TDOBJECT VALUE 'MATERIAL',
                                       " To hold object id
   LV_VALUE(70).                       " Value to hold material number
START-OF-SELECTION.* This perform is used to upload the file
PERFORM UPLOAD_FILE.* This perform is used to place the text in MM02 transaction
PERFORM PLACE_LONGTEXT.
*&      Form create_text
* This routine used to create text in MM02 transaction
* Passed the parameter w_grun to P_C_GRUN
*                 and lv_value to P_LV_VALUE
FORM CREATE_TEXT USING    P_C_GRUN
                           P_LV_VALUE. DATA:
    L_ID LIKE THEAD-TDID,
    L_NAME(70). MOVE : P_C_GRUN TO L_ID,
         P_LV_VALUE TO L_NAME. CALL FUNCTION 'CREATE_TEXT'
       EXPORTING
         FID               = L_ID
         FLANGUAGE         = SY-LANGU
         FNAME             = L_NAME
         FOBJECT           = W_OBJECT
*      SAVE_DIRECT       = 'X'
*      FFORMAT           = '*'
       TABLES
         FLINES            = T_LINE
      EXCEPTIONS
        NO_INIT           = 1
        NO_SAVE           = 2
        OTHERS            = 3
IF SY-SUBRC <> 0.
    CLEAR LV_VALUE.
ELSE.
    DELETE T_LINE INDEX 1.
ENDIF.ENDFORM.                    " create_text*&---------------------------------------------------------------------*
*&      Form upload_file
* This routine is used to upload file
* No interface parameters are passed
FORM UPLOAD_FILE . CALL FUNCTION 'UPLOAD'
   EXPORTING
*     CODEPAGE                      = ' '
*     FILENAME                      = ' '
      FILETYPE                      = 'DAT'
*     ITEM                          = ' '
*     FILEMASK_MASK                 = ' '
*     FILEMASK_TEXT                 = ' '
*     FILETYPE_NO_CHANGE            = ' '
*     FILEMASK_ALL                  = ' '
*     FILETYPE_NO_SHOW              = ' '
*     LINE_EXIT                     = ' '
*     USER_FORM                     = ' '
*     USER_PROG                     = ' '
*     SILENT                        = 'S'
*   IMPORTING
*     FILESIZE                      =
*     CANCEL                        =
*     ACT_FILENAME                  =
*     ACT_FILETYPE                  =
    TABLES
      DATA_TAB                      = T_UPLOAD
     EXCEPTIONS
       CONVERSION_ERROR              = 1
       INVALID_TABLE_WIDTH           = 2
       INVALID_TYPE                  = 3
       NO_BATCH                      = 4
       UNKNOWN_ERROR                 = 5
       GUI_REFUSE_FILETRANSFER       = 6
       OTHERS                        = 7
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. SORT T_UPLOAD BY MATNR ID.
ENDFORM.                    " upload_file
*&      Form place_longtext
* This routine places the text in MM02 transaction
* No interface parameters are passed
FORM PLACE_LONGTEXT . LOOP AT T_UPLOAD.    T_LINE-TDFORMAT = 'ST'.
    T_LINE-TDLINE = T_UPLOAD-LTEXT.
    APPEND T_LINE.    IF T_UPLOAD-ID EQ 'BT'.
      MOVE T_UPLOAD-MATNR TO LV_VALUE.
      MOVE 'GRUN' TO W_GRUN.                   "Test ID for Basic data text
      PERFORM CREATE_TEXT USING W_GRUN LV_VALUE.
    ENDIF.    IF T_UPLOAD-ID EQ 'IT'.
      CLEAR W_GRUN.
      MOVE T_UPLOAD-MATNR TO LV_VALUE.
      MOVE 'PRUE' TO W_GRUN.                      "Test ID for Inspection text
      PERFORM CREATE_TEXT USING W_GRUN LV_VALUE.
    ENDIF.    IF T_UPLOAD-ID EQ 'IC'.
      CLEAR W_GRUN.
      MOVE : T_UPLOAD-MATNR TO LV_VALUE,
             'IVER' TO W_GRUN.
                                                  "Test ID for Internal comment
      PERFORM CREATE_TEXT USING W_GRUN LV_VALUE.
    ENDIF.
ENDLOOP.ENDFORM.                    " place_longtext

BADI for sales order header level data

Is there any BADI which will give me the sales order header level data? I need net price of the sales order in header level. KOMK structure does not contains the net price value.

My requirement is:
I am writing a pricing routine for calculating ZSMR condition value in sales order header level. The formula for calculating is (NET PRICE / NET SALES COST) / NET PRICE.
I can't use VBAK because I have not saved the sales order yet. I need to use some structure.
Which structure contains the net price of the sales order in header level. KOMK structure does not contains the net price value.
Edited by: dossgs on May 21, 2010 4:08 PM

Table for Sales Order Header Text

Hi,
I want Table Name for Sales Data -> Header Text.
Path--
When we open the Sales order, Click on Display Document Header Details --> Here select the Text tab. Here, see the written text in Form Header (1st option).
I want that table Name which contain the Header Text. Because If header text is more than 1 line, where it stores??
Plz. help

Hi,
Text data are stored in tables STXH (Header) and STXL(Item).
But you can't find the exact text in these tables as the text are stored in binary form.
You need to use function module READ_TEXT to read any document texts.
Check the link [Use FM READ_TEXT to Read the Various Text|http://www.sap-img.com/abap/use-fm--read-text-to-read-the-various-text.htm] which explains how to use this module to read the text.
Regards,

Default Output Type for Sales Order Header

Hi Guru
I created 2 output types for hardcopy printout and for mail.
I want both should be selected as default when a sales order is created. (using NACE)
Output will be manually from VA02 -> issue output to. Here I must get 2 output types.
As of now, this is manual process.
Please help.
sunil Kolambkar.

Hi Sunil,
For this you need to maintain condition record for output type. for the sales order type, [V V11].
Do the output determination in the same way as Pricing procedure determination.
OUTPUT DETERMINATION:
SPRO- IMG- Basic Functions- Output Control- Output Determination- Output Det using Cond Tech- Output Det for Sales Documents & output det for billing documents.
Create Condition Table: select the field Sales Doc Type from field catalog & Save
Maintain Access Sequence: 4-digits code & description.
Assign condition table to access sequence. Select Accesses line item and Go To Fields. Fields will display the fields we have selected in the condition table i.e. sales doc type.
Maintain Output Types:
AF00: Inquiry
AN00: Quotation
BA00: Order Confirmation
LD00: Delivery
Select BA00 & Copy & Rename. Give the same 4-digit code as given to acc seq.
You Can Maintain:
Languages of Output
Partners (to whom we want to send output)
Print Program- print specification
Sap Script- layout
Assign Output Types to Partner Functions: go to new entries & assign your output type to partner functions.
Maintain Output Determination Procedure: V10000 (Standard Procedure). Go to new entries & create your own 6-digit code with descp. Select the procedure & go to Control Data. Here mention the output type i.e. cond type & leave requirement and manual only columns as blank.
Determination Rule: link the 6-digit procedure code to doc types.
Create Condition Records: VV11. Select document type and click on Communication. Mention partner function, medium, time. Output device: LP01, Spool request Name: SD_003, Suffix 2: order_confir & flag on print immediately.
Once you press enter you will come across 2 key combinations:
Sales organisation/ Customer Number: fill SO, Customer No, Partner Function Abbreviation, Partner to whom the output should be sent, time, medium, language. {It contains: Sales Orgn, Customer, Partner Function (The abbreviated form of the name that identifies the Partner) (During output determination, the system determines the recipient of the output from the master record for the specified partner function. In this field, you can explicitly specify a recipient that will override the standard partner. There must also be a master record for the partner that is specified explicitly.), Medium, Time & Language.}
Order Type: Document Type, Partner Function (abbreviation), Partner, Medium, Time & Language.
Hope this would be helpful.
Regds,
Rupali

Updating processing log for sales order header output

I want to prevent a custom sales order confirmation from printing when the order has not been approved. When the user requests the form to print in the background, I want to update the processing log to have a red light and a message indicating the order has not been approved, so it cannot be printed. When I pass an error message to the protocol processing, the update is terminated and my changes to the sales order are lost. Is there a way to update the processing log, show the red light, and not get the hard error?
Thank you in advance.
Jay

Setting the return code after the protocol update did the trick.

How to update the sales order header & item data in TM system

Hi Experts,
Greetings!
I need your help,I have a one requirement sales order data came from ECC these sales order data need to update in TM Sales order header table as well as item table also these fields are additional fields.
Can anyone please guide me I am very new in TLM .
Thanks in advance.
Thanks&Regards,
Siva.

Hi Siva
"/SCMTMS/TRQ~ROOT" is for sales order header and "/SCMTMS/TRQ~ITEM" is for details.
I assume you need to
enhance the structures for these nodes to hold your add. fields;
and do the same for the input parameter of service TransportationRequestRequest_In (which is used to create OTR) from PI side;
Pass the add. fields during service call (impelment in ERP system);
Map the fields from service paremeter to node attribute (implement in TM system, BAdI /SCMTMS/TRQ_SE_TPNRQ_REQ~CHANGE_MODIFICATION create modification table for the input parameter).
I cannot find source code for all of that; hope it helps.
Sensen

Which table stores the Sales Order--Header--Texts--EDI Text?

Hi Experts,
I hv a requirenment regarding the Sales Order -> HEADER -> TEXTs -> EDI Text-Int, so, I need to hv some Orders(#). which does hv this text on them, for as test data.
So, I am looking which table stores, this text for my_sales_oders_12345678.
[ actually, i got some info from sdn, like,
Table TTXOB -> stores Texts: application object for Sales order header it is always VBBK i.e. field TDOBJECT = VBBK.
Now all the text types i.e. text ids are stored in table TTXID
So fetch all text ids(TDID) from this table based on TDOBJECT = VBBK. And its descriptions are stored in TTXIT table.
but, no use this ]
thanq
Edited by: Srinivas on Jul 10, 2008 11:06 PM

Hi Srinivas,
Generally to access the text we use READ_TEXT function Module.
we need to pass the four parameters
ID
LANGUAGE
NAME
OBJECT
You can find these parameters in the sales order it self.
Goto ---> Header ---> Texts
Now double click on the text it takes you to the Text Editor. You can find the screen Display Form Header . In this goto Menu Path Goto ---> Header. You get a screen Text header. Here you can find the these parameters.
Text Name
Language
Text ID
Text Object
You need to pass these parameters to the function Module to text the text.
You can also fins the text in Table STXH
Best regards,
raam

Need function module for Sales order overall status

Dear Team,
Our requriement is we need to capture sales orders overall status 'compleated' in header and item datat details.
Could you please let me know what are function modules available for to get the over all status for sales orders, (header and item)
Thanks & Regards,
MK.

Hi MK,
Use any of this FMs.
C1CE_VBUK_READ
SD_VBUP_READ_WITH_VBELN
WCB_VBUK_READ
Note that the values are in table VBUK and you can do a select statement from that table to get what you need.
Regards,
Peter

How to pass header text in bapi for sale order

hai to all
i am using BAPI_SALESORDER_CREATEFROMDAT2 to create sale order
i can find order_text in tables parameters for creating item texts
but in my senario i have to maintain header text
please advice me how to proceed
rgds
vijay

Hi Vijay,
As I mentioned <b>it is very much possible to create sales order header text with this BAPI only</b>.
Just check out following working code:
REPORT yab_testso .
DATA: orderheaderin LIKE bapisdhd1,
orderitem TYPE TABLE OF bapisditm,
wa_orderitem TYPE bapisditm,
orderitemx TYPE TABLE OF bapisditmx,
wa_orderitemx TYPE bapisditmx,
orderpart TYPE TABLE OF bapiparnr,
wa_orderpartner TYPE bapiparnr,
ordertext TYPE TABLE OF bapisdtext,
wa_text TYPE bapisdtext,
orderret TYPE TABLE OF bapiret2,
wa_ret TYPE bapiret2,
lv_lines type i.
orderheaderin-doc_type = 'ZZOR'.
orderheaderin-sales_org = 'SS01'.
orderheaderin-distr_chan = 'SH'.
orderheaderin-division = 'ST'.
wa_orderpartner-partn_role = 'SP'.
wa_orderpartner-partn_numb = '1000000342'.
APPEND wa_orderpartner TO orderpart.
wa_orderpartner-partn_role = 'WE'.
wa_orderpartner-partn_numb = '1000000342'.
APPEND wa_orderpartner TO orderpart.
wa_orderitem-itm_number = '10'.
wa_orderitem-material = '000000111000000185'.
wa_orderitem-target_qty = '10'.
APPEND wa_orderitem TO orderitem.
wa_text-text_id = '0012'.
wa_text-langu = 'E'.
wa_text-text_line = 'Test for text creation'.
APPEND wa_text TO ordertext.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
SALESDOCUMENTIN               =
    order_header_in               = orderheaderin
ORDER_HEADER_INX              =
SENDER                        =
BINARY_RELATIONSHIPTYPE       =
INT_NUMBER_ASSIGNMENT         =
BEHAVE_WHEN_ERROR             =
LOGIC_SWITCH                  =
TESTRUN                       =
CONVERT                       = ' '
IMPORTING
SALESDOCUMENT                 =
TABLES
   return                        = orderret
   order_items_in                = orderitem
ORDER_ITEMS_INX               =
    order_partners                = orderpart
ORDER_SCHEDULES_IN            =
ORDER_SCHEDULES_INX           =
ORDER_CONDITIONS_IN           =
ORDER_CFGS_REF                =
ORDER_CFGS_INST               =
ORDER_CFGS_PART_OF            =
ORDER_CFGS_VALUE              =
ORDER_CFGS_BLOB               =
ORDER_CFGS_VK                 =
ORDER_CFGS_REFINST            =
ORDER_CCARD                   =
   order_text                    = ordertext
ORDER_KEYS                    =
EXTENSIONIN                   =
PARTNERADDRESSES              =
describe table orderret lines lv_lines.
READ TABLE orderret into wa_ret index lv_lines.
IF wa_ret-type = 'S'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / wa_ret-message_v2.
ENDIF.
Hope it helps.
Regards,
Akshay Bhagwat
Note: Pls reward points if this helps you.

What's the name of FM for getting Sales Order Header / Item Status info

Hello All:
Do you know what's the name of Function Module for getting Sales Order Header / Item Status Overview ? Any sample code will be very much appreciated.
Basically, I am trying to create a Webpage where user can enter the Sales Order document number and will return the Sales Order: Status Overview.
Thanks,
Dipankar Biswas

Thanks everybody ! Appreciate for your prompt response. I was also looking for some sample code, and I did find some on. And here is one. I still have to try the code, but here is for all your reference:
*& Report ZBAPI_SALESORDER_GETSTATUS *
*& Read and Display the Sales Order Items and Status of the Order *
REPORT zbapi_salesorder_getstatus NO STANDARD PAGE HEADING LINE-SIZE 200 LINE-COUNT 33(3).
TABLES: vbap. "Sales Document Item Data.
DATA: wa_bapireturn TYPE bapireturn,
wa_bapisdstat TYPE bapisdstat,
it_bapisdstat LIKE STANDARD TABLE OF wa_bapisdstat.
TYPES: BEGIN OF ty_mat_name,
matnr TYPE makt-matnr,
maktx TYPE makt-maktx,
END OF ty_mat_name.
DATA: wa_mat_name TYPE ty_mat_name,
it_mat_name LIKE TABLE OF wa_mat_name WITH KEY matnr .
PARAMETERS: p_vbeln LIKE vbap-vbeln DEFAULT 5573.
START-OF-SELECTION.
SELECT matnr maktx FROM makt INTO TABLE it_mat_name.
CALL FUNCTION 'BAPI_SALESORDER_GETSTATUS'
EXPORTING
salesdocument = p_vbeln
IMPORTING
return = wa_bapireturn
TABLES
statusinfo = it_bapisdstat.
IF wa_bapireturn IS INITIAL. " Successful Execution.
WRITE: / 'Document No: ' COLOR 1, 20 'PO Number : ', 40 'Status' , 50 'Delv.Stat',60 'Item No', 80 'Material', 90 'Material Description', 130 'Net Price' COLOR 2.
ULINE.
LOOP AT it_bapisdstat INTO wa_bapisdstat.
WRITE: / wa_bapisdstat-doc_number. " Sales Document Number.
READ TABLE it_mat_name INTO wa_mat_name WITH KEY matnr = wa_bapisdstat-material.
WRITE: /20 wa_bapisdstat-purch_no, " Customer Purchase Order Number
40 wa_bapisdstat-prc_stat_h, " Processing Status
50 wa_bapisdstat-dlv_stat_h, " Delivery Status
60 wa_bapisdstat-itm_number, " Item Number
80 wa_bapisdstat-material, " Material
90 wa_mat_name-maktx, " Material Description
130(10) wa_bapisdstat-net_price. " Net Price
CLEAR wa_bapisdstat.
ENDLOOP.
REFRESH it_bapisdstat[].
ELSE.
WRITE: wa_bapireturn-message.
ENDIF.

Creating multiple partner function for a sale order @ header level

Hi All,
I have a requirement where in i have to create more than one partner funtion for a sale order @ header level. But the system did not allow this sort of scenario and i got the error,
Partner function ZZ can only occur 1 times in procedure TA (Sales Document Header)
the function module that was giving this error was SD_PCHECK_PARVW_COUNT_OK
here the function module checks if a partner function already exists if so it throws that error. This also updates the VBPA table where partner function is one of the key fields.
Our issue is that we have to allow the system to enable posting 2 or more partner function for the same sale order. It was also verified that the unique key was unchecked during configuration.
is there any other way of over coming this issue as we are updating the standard table. Is it possible??
Thanks a lot in advance for your reply....

I believe this is a configuration setting, based upon the details of your post. Typically, a sales order can have multiple partner functions, but usually the partner type is not duplicated at a single level (header or one item). For example, it would not be logical to have multiple ship-to partners at the header level...these would be unique at the item level, if required.
Speak to your SD functional specialist about the configuration controls for partners, if you must have more than one partner with parvw = ZZ, for the entire order (header level).
Edited by: DaveL on Aug 23, 2011 3:00 PM

Enchancements for sales order header

Similar Messages

Maybe you are looking for