End point creation problem

Hi,
I created a web service in my development system using se37 and SAP created the endpoint for me and the webservice works great when i call from outside. I transported the web service to QA system but I guess SAP doesn't transport the endpoint. So i went into SOAMANAGER to create the end point. After i created the point I tried to call the web service from the outside system and i noticed that the structure of the web service has changed and i am getting errors too. My question is, can i transport the end point? not sure maybe some one had a problem with sap generated endpoint & SOAMANAGER created end point.
Thanks

Here is what i get inside the HTML
This issue is also happening in DEV system.
when sap creates the end point the service name looks like this (in DEV)
<wsdl:service name="Z_MOBILE_INVLISTINGService">
if i remove the endpoint and create manually in SOAMANGER the XML shows the service name like this (in DEV)
<wsdl:service name="Z_MOBILE_INV_LISTING">
The word 'Service' at the end is removed.
Thanks

Similar Messages

Error during end point creation in SOAMANAGER

Hi All,
I haveto create an endpoint to a consumer proxy created by me. For this, I choose the "WSDL Based Configuration" option for the creation of logical port in the SOAMANAGER. The provider proxy wsdl url is in this form "https://uxai1q0m.wdf.sap.corp:44376/sap/bc/srt/...". However, when I provide this WSDL URL, try the option "Show/Hide proxy settings", and put the host, port and the user and password for the provider system. Once I do this, I get a error message:
Error in WSDL access: Exception occurred in communication framework:Error in HTTP Framework: cl_http_client->send() rc=1 http://uxai5q0m.wdf.sap.corp:50076/sap/bc/srt/wsdl/...
Can anyone help in resolving the error??
Best Regards,
Debashree

Try the following:
Please add the user name and password in sap/bc/srt/wsdl
2. enter the webaddress in the filter entries in SICF --> client --> proxy setting --> Global setting tab under "No proxy for the following address"
Regards,
Firoz.

Error while creating the end point ICMON_UI_WS - SP11

Hi All,
We have upgraded the SAP Solution Manager 7.1 SP04 to SP11.
Currently i am working on system preparation.
solman_setup -> System preparation -> 5.3 Enable Web Services getting the below error
CX_URLAPI_URL_EXCEPTION : Error during End Point creation
Long Text(1)
Error during End Point creation.
Text(2)
CX_SRT_WSP_CONFIG : Error when reading variant "ICMON_UI" of service
definition "ICMON_UI": Web service object does not exist
Also checked the note :1900781 - Missing services required by Solman Setup System Preparation Step 4.3 Enable Web Services.
But this note is available for download.
Any idea about this issue.
Rg,
Karthik

Hi
Try out these point
1. Take the backup of the folder .dtc ,.dtr in your home directory.Delete .dtr & .dtc folders in your directoryt,hen try to create it.
2.Check NWDS, WebAS, NWDI, and its compatability ? Which versions are you running now?
3. [Connect to DTR Fails |http://help.sap.com/saphelp_erp2005/helpdata/en/69/21244134a56532e10000000a1550b0/frameset.htm]
4 . See the Note : 939041 & 772755
Best Regards
Satish Kumar

Problem getting parameter values at the service end point

I am having problem getting parameter values at the service end point. I created service end point and this method is having 35 parameters and then i created test client file using Sun One Studio 5. but when i run this test client and make a call to service it sends wrong value to first three parameters to the service end point. I tried all the way round but it gave me same sort of problem. I change the order of parameters change the names of parameters but it didn�t work. And then i started chopping of parameter from the left side. And my problem is solved when my parameter list reached to 12 from 35. So is it a bug or some problem with my configuration or some thing else.
I am using sun one studio 5 with sun one app 7. My service end point does very simple thing. It only takes out put of the parameter to the server log file. And my wsdl file seems all right. There is no conflict with the count and data type of the parameter information it contains.
�     Service End Point Definition (in EJB)
public java.lang.String setNewAddress(java.lang.String propertyName, java.lang.String status, java.lang.String PMSCode, java.lang.String streetNumPrefix, int streetStartNum, java.lang.String streetStartNumSuffix, int streetEndNum, java.lang.String streetEndNumSuffix, java.lang.String streetName, java.lang.String streetType, java.lang.String streetSuffix, java.lang.String localityPrefix,java.lang.String localityName, java.lang.String postcode, java.lang.String stateCode, java.lang.String countryCode, java.lang.String description, java.lang.String coordinateAccuracy, int longitude, int latitude, java.lang.String planNumber, java.lang.String lotPrefix, int lotNumber, int siteID, java.lang.String countryName, java.lang.String parishName, java.lang.String section, int portionNum, int crownAllotNum, int titleVol, java.lang.String folio, java.lang.String esa, int aliasID, int aliasTagID,String ID) {
System.out.println(propertyName);
System.out.println(PMSCode);
System.out.println(streetNumPrefix);
........ taking printout of all the paramters
�     This is my WSDL file
<?xml version="1.0" encoding="UTF-8"?>
<definitions name="NMService" targetNamespace="urn:NMService/wsdl" xmlns:tns="urn:NMService/wsdl" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/">
<types/>
<message name="NMServiceServantInterface_setNewAddress">
<part name="String_1" type="xsd:string"/>
<part name="String_2" type="xsd:string"/>
<part name="String_3" type="xsd:string"/>
<part name="String_4" type="xsd:string"/>
<part name="int_5" type="xsd:int"/>
<part name="String_6" type="xsd:string"/>
<part name="int_7" type="xsd:int"/>
<part name="String_8" type="xsd:string"/>
<part name="String_9" type="xsd:string"/>
<part name="String_10" type="xsd:string"/>
<part name="String_11" type="xsd:string"/>
<part name="String_12" type="xsd:string"/>
<part name="String_13" type="xsd:string"/>
<part name="String_14" type="xsd:string"/>
<part name="String_15" type="xsd:string"/>
<part name="String_16" type="xsd:string"/>
<part name="String_17" type="xsd:string"/>
<part name="String_18" type="xsd:string"/>
<part name="int_19" type="xsd:int"/>
<part name="int_20" type="xsd:int"/>
<part name="String_21" type="xsd:string"/>
<part name="String_22" type="xsd:string"/>
<part name="int_23" type="xsd:int"/>
<part name="int_24" type="xsd:int"/>
<part name="String_25" type="xsd:string"/>
<part name="String_26" type="xsd:string"/>
<part name="String_27" type="xsd:string"/>
<part name="int_28" type="xsd:int"/>
<part name="int_29" type="xsd:int"/>
<part name="int_30" type="xsd:int"/>
<part name="String_31" type="xsd:string"/>
<part name="String_32" type="xsd:string"/>
<part name="int_33" type="xsd:int"/>
<part name="int_34" type="xsd:int"/>
<part name="String_35" type="xsd:string"/></message>
<message name="NMServiceServantInterface_setNewAddressResponse">
<part name="result" type="xsd:string"/></message>
<portType name="NMServiceServantInterface">
<operation name="setNewAddress" parameterOrder="String_1 String_2 String_3 String_4 int_5 String_6 int_7 String_8 String_9 String_10 String_11 String_12 String_13 String_14 String_15 String_16 String_17 String_18 int_19 int_20 String_21 String_22 int_23 int_24 String_25 String_26 String_27 int_28 int_29 int_30 String_31 String_32 int_33 int_34 String_35">
<input message="tns:NMServiceServantInterface_setNewAddress"/>
<output message="tns:NMServiceServantInterface_setNewAddressResponse"/></operation></portType>
<binding name="NMServiceServantInterfaceBinding" type="tns:NMServiceServantInterface">
<operation name="setNewAddress">
<input>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></input>
<output>
<soap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" use="encoded" namespace="urn:NMService/wsdl"/></output>
<soap:operation soapAction=""/></operation>
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" style="rpc"/></binding>
<service name="NMService">
<port name="NMServiceServantInterfacePort" binding="tns:NMServiceServantInterfaceBinding">
<soap:address location="http://localhost:80/NMService/NMService"/></port></service></definitions>
�     I followed steps given this example. http://developers.sun.com/prodtech/javatools/jsstandard/reference/docs/s1s5/stockapp.html.
If some one know what is wrong. Is it me or some thing wrong with the method I followed. But I am sure that I followed exactly the same method as it given in examples. So if some one can guide me
Thanks

I just found that there is a bug with Sun One Studio 5. It creates faulty JSP file to test the client for the web services. With above problem I tested my web services using different developing environment such as Jdeveloper 10g. I created client stub using wsdl file generated by sun one studio. And made call to my web service and all the parameter reached perfectly at service end point. And then I used stub class created by sun one studio for the client and made the same call. And it also went well. So the problem is with the test application (JSP File) sun one creates for my web service.
This is the majore problem i faced during the development. But still there is many problem along with this which is not seriouse enough but requires attension. I would like sun developers to make sun one studio IDE simpler and handy .

Watch Folder End Point Problem

Hi,
I'm currently evaluating LiveCycle ES and having problems with watched folder end point.
I use the Sample - Barcoded Forms: RouteOnDataEntry process and have added and configured the watched folder end point for the process.
When I copy the RouteOnDataEntry PDF form to input folder, it manage to pick up the file, but the PDF is moved to failure folder. Here is the information I get from the failure.log:
Failure Time----Wed Aug 15 17:30:16 PDT 2007
source location ---- Reason of failure is-----Failure to invoke the job RouteOnDataEntry
Failure to invoke the job RouteOnDataEntry
Invocation error.
javax.jms.JMSException: Could not create a session: javax.resource.spi.CommException: javax.naming.NameNotFoundException: XAConnectionFactory
Could not create a session: javax.resource.spi.CommException: javax.naming.NameNotFoundException: XAConnectionFactory
ALC-DSC-600-000: com.adobe.idp.dsc.provider.service.scheduler.impl.SchedulerRuntimeException: Failure to invoke the job RouteOnDataEntry
I check the jboss server log file and see a lot exception regarding javax.naming.NameNotFoundException: XAConnectionFactory.
Please advise what is the cause and how to solve this problem.
Thanks
Fadly

Hi,
My requirement is to develop a standalone java program to convert Word documents to PDFs using Adoble LC ES.
I found the code from the Adobe LC ES documentation. Please help me what's wrong in the code.
I don't understand what i'm missing in the code...The "test.doc" file
is there in the given location with proper data and Document object is not "NULL". Program is able to connect to Adobe LC Server. No issues with connection. But why the error ??
Code & exception are below :
CODE:
import java.io.File;
import java.util.Properties;
import com.adobe.idp.Document;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
import com.adobe.livecycle.generatepdf.client.CreatePDFResult;
import
com.adobe.livecycle.generatepdf.client.GeneratePdfServiceClient;
public class GeneratePDFFromNativeFiles {
public static void main(String[] args)
Properties ConnectionPropsForSOAP = new Properties();
ConnectionPropsForSOAP.setProperty("DSC_DEFAULT_SOAP_ENDPOINT",
"http://workspace-d.web.abbott.com:8080/soap/services/
ConvertAllFileTypesToPDF?wsdl");
ConnectionPropsForSOAP.setProperty("DSC_TRANSPORT_PROTOCOL", "SOAP");
ConnectionPropsForSOAP.setProperty("DSC_SERVER_TYPE", "JBoss");
ConnectionPropsForSOAP.setProperty("DSC_CREDENTIAL_USERNAME",
"epaspdfgen");
ConnectionPropsForSOAP.setProperty("DSC_CREDENTIAL_PASSWORD",
"epaspdf1");
ServiceClientFactory factory =
ServiceClientFactory.createInstance(ConnectionPropsForSOAP);
try{
String currentDirectory = System.getProperty("user.dir");
String sourceDocPath="/test.doc";
String resultDocPath ="/bin/arg/util/simpleFTP/test.pdf";
String inputFilePath = currentDirectory+sourceDocPath;
File file = new File(inputFilePath);
String adobePDFSettings = "Standard";
String securitySettings = "No Security";
String fileTypeSettings = "Standard";
GeneratePdfServiceClient gps = new
GeneratePdfServiceClient(factory);
Document inputDoc = new Document(file,true);
CreatePDFResult docResult=gps.createPDF (inputDoc, inputFilePath,
fileTypeSettings, adobePDFSettings,
securitySettings, null, null);
Document createdDocument = docResult.getCreatedDocument();
createdDocument.copyToFile(new File(currentDirectory
+resultDocPath));
catch (Exception e) {
e.printStackTrace();
System.out.println("Error OCCURRED: " + e.getMessage());
EXCEPTION:
ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal
error.
at
com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapAxisDispatcher.throwExceptionHandler(So apAxisDispatcher.java:
207)
at
com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapAxisDispatcher.doSend(SoapAxisDispatche r.java:
125)
at
com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send(AbstractMessageDispat cher.java:
57)
at
com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:
208)
at
com.adobe.livecycle.generatepdf.client.GeneratePdfServiceClient.createPDF(GeneratePdfServ iceClient.java:
172)
at
arg.util.simpleFTP.GeneratePDFFromNativeFiles.main(GeneratePDFFromNativeFiles.java:
73)
Caused by: ALC-DSC-002-000:
com.adobe.idp.dsc.RequiredParameterException: Parameter: inputDocument
is required.
at
org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:
221)
at
org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:
128)
at
org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:
1087)
at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown
Source)
at
org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown
Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl
$FragmentContentDispatcher.dispatch(Unknown Source)
at
org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown
Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
at org.apache.xerces.jaxp.SAXParserImpl$JAXPSAXParser.parse(Unknown
Source)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
at
org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:
227)
at org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
at org.apache.axis.Message.getSOAPEnvelope(Message.java:424)
at
org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:
62)
at org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
at org.apache.axis.client.Call.invokeEngine(Call.java:2765)
at org.apache.axis.client.Call.invoke(Call.java:2748)
at org.apache.axis.client.Call.invoke(Call.java:2424)
at org.apache.axis.client.Call.invoke(Call.java:2347)
at org.apache.axis.client.Call.invoke(Call.java:1804)
at
com.adobe.idp.dsc.provider.impl.soap.axis.sdk.SoapAxisDispatcher.doSend(SoapAxisDispatche r.java:
123
Please help me.
Thanks a lot.
VJ.

Problem setting project end point (can't access the end point marker)

I can't seem to set my project end point because the slider control that adjusts the spacing of the measures is obstructing my pointer from being able to click on the end point marker. Any hints as to how I can move the coation of this slider control so that I can access the end point marker with my pointer?

6ftmama wrote:
FYI - the end point marker now turns into a bracket when you hover over it.
THe End-of-Project Marker doesn't change at all. What you see is a change of the Mouse Pointer.
This is called a "Click Zone" where the Mouse Pointer changes to different shapes when moving over or click on an object or an area in the window.
Here the Mouse Pointer changes to "Trim Tool" or "Resize Tool".
Pointer Tool:
Resize Tool:
It is the same Tool wne you move the Mouse Pointer of the right edge of a Region to resize its length.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

TS1702 Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a

Maps program does not work. In standard it only shows a grid. If I ask for a route it shows start and end point and three route boxes but nothing else. It does show directions. If I switch to hybrid it shows to routes but no roads. Background is a blur.

Do you have a question? This is a user to user help forum. Apple is not here only other users like yourself. You don't report problems to Apple here.
By the way, it might help if you indicated where you are located.
To complain to Apple use http://www.apple.com/feedback/ipad.html

Exporting line end point coordinates?

Hi,
I'm in desperate need of a script to export the coordinates of lines, or paths, it doesn't really matter, into a text document.
I've set my ruler up so the 0,0 is in the center of the image, because I need both 0,0 and -0,-0 to work for what I have in mind, basically using a document as a large Cartesian grid, which you can then extract coordinates of 'edges' or end points of lines from.
A little background on why I need it, for anyone curious. I figured out a way to build new worlds/maps for a game that generates terrain based on 'boundaries', which are drawn on, in a 2d plane, but I need coordinates to map these boundaries correctly. I could do it manually, where I'd hover my mouse over every edge or end of the line point, but this would save a LOT of time.
I'd be insanely grateful if anyone can help me out. I've tried looking for scripts or other software, but haven't been successful at all for what I really need.
The way I have my document setup is, 1 pixel per cm, 16384x16384cm. It's quite large, so most 'graph' software won't work for it. The grid itself works fairly well, I just need a decent way to export the coordinates from it.
Thanks in advance!
Edit:
Here, I made an example of a rectangle to give you guys the idea of which coordinates I'd need:
http://i.imgur.com/VILOwrL.png

Don't appologize, I was stuck on cm because I thought there wasn't another way, I only figured out after JJMack mentioned it, that it's possible purely by pixels.
First time working with coordinates, I'm in total new territory.
The above works great, except now I've stumbled across 2 new problems, sorry to make it so complicated!
What I have now, slightly tweaked what you gave me:
var dataFile = new File('~/desktop/exportData.txt');
var doc = app.activeDocument;
    for(var c =0; c<doc.layers.length;c++){
       doc.activeLayer= doc.layers[c];
var pathItem = doc.pathItems[doc.pathItems.length-1];
var dataStream = "";
for(var subPathIndex = 0;subPathIndex<pathItem.subPathItems.length;subPathIndex++){
    for(var pointIndex = 0;pointIndex<pathItem.subPathItems[subPathIndex].pathPoints.length;pointIndex++){
                dataStream = dataStream+doc.activeLayer.name+'\t';
        dataStream = dataStream+pathItem.subPathItems[subPathIndex].pathPoints[pointIndex].anchor+'\t'+'\r';
        dataStream = dataStream+'\r';
dataFile.open('w');
dataFile.write(dataStream);
dataFile.close();
But this outputs this:
Background     4222,0
Background     2963,-3550
Background     4330,-4210
Background     6450.3937,-2459
Background     6141,2387
Background     4834,2891
Background     3970,924
Which made me realize, that the paths aren't bound to a layer (It's been a while since I've used paths), so it'll just use the Background layer. There is no way around that, right? Since this script only targets layers, it'll ignore path names, which brings me to another question, is it possible to use the same thing, only for saved paths? So if you had 2 paths, one named P1 and the other P2, that it would display it like:
P1     4222,0
P1     2963,-3550
P1     4330,-4210
P1     6450.3937,-2459
P2     6141,2387
P2     4834,2891
P2     3970,924
And the other thing, because I'm using a loop now, which basically repeats the \r after ever coordinate, there isn't a way to collect all coordinates and display them in a chain, basically, and then using the \r after all the coordinates for one path is exported, before it moves on to the next path, or? Basically like the post previous to this, except with paths, instead of layers.
Thank you guys so much for helping me though, would been completely lost without it.

Playing Quicktime with Multiple Start End Points

Hello
I posted a message a few days which I received help on
regarding starting and ending a Quicktime movie from various points
in the movie. Now I have a new problem which I cannot fix at all..
Here is the problem:
I have a Quicktime movie on stage and 10 various buttons that
contain a generic script which allows input of start and end points
for each button to trigger the movie. Initially just doing this
with one button is successful.
However, multiple buttons all with the same generic code make
the movie freeze up completely. My guess is that they are all
fighting each other for control. Maybe I need something in the code
which allows the button that is being used to play the movie to
keep control.
Here is the code I use for each button, the movie is on frame
15.
property pQT,pStart,pEnd,pFrame, pVolume
on beginSprite me
sprite(me.spriteNum).color=rgb (255,255,255)
cursor 0
if integer(pQT).ilk=#integer then pQT=integer(pQT)
end
on mouseUp me
sound(3).volume=sprite(15).volume
sprite(15).volume=pVolume
sprite(pQT).movieTime=pStart
sprite(pQT).movieRate=1
cursor 0
end
on mouseEnter me
sprite(me.spriteNum).color=rgb (173,24,41)
sprite(me.spriteNum).cursor=280
end
on mouseLeave me
sprite(me.spriteNum).color=rgb(255,255,255)
sprite(me.spriteNum).cursor=0
end
on mouseDown me
sprite(me.spriteNum).cursor=290
end
on enterFrame me
if sprite(pQT).movieTime>=pEnd then
sprite(pQT).movieRate=0
end if
end
on getPropertyDescriptionList me
if not the currentSpriteNum then exit
vPDList=[:]
setaProp vPDList, #pQT, [#comment: "Which QT sprite",
#format: #integer, #default: 0]
setaProp vPDList, #pStart, [#comment: "Range start",
#format: #integer, #default: 0]
setaProp vPDList, #pEnd, [#comment: "Range end", #format:
#integer, #default: 0]
setaProp vPDList, #pVolume, [#comment: "Volume", #format:
#integer, #default: 0]
return vPDList
end getPropertyDescriptionList
Any help is much appreciated. (not a lingo expert)
Andy

Many thanks Mike
Works fantastically.
I just thought I would post the finished code - well, tweaked
ever so slightly from Mike's orginal for anybody wanting a nice
little behaviour for controlling a Quicktime movie.
(watch out for page breaks etc - should be 68 lines)
property pQT,pStart,pEnd,pFrame,
pVolume,pMyControl,pReturnMarker
on beginSprite me
sprite(me.spriteNum).color=rgb (255,255,255)
cursor 0
if integer(pQT).ilk=#integer then pQT=integer(pQT)
pMyControl=0
end
on mouseUp me
sound(3).volume=sprite(pQT).volume
sprite(pQT).volume=pVolume
sprite(pQT).movieTime=pStart
sprite(pQT).movieRate=1
pMyControl=1
cursor 0
end
on mouseEnter me
sprite(me.spriteNum).color=rgb (173,24,41)
sprite(me.spriteNum).cursor=280
end
on mouseLeave me
sprite(me.spriteNum).color=rgb(255,255,255)
sprite(me.spriteNum).cursor=0
end
on mouseDown me
sprite(me.spriteNum).cursor=290
end
on enterFrame me
if pMyControl then
if sprite(pQT).movieTime>=pEnd then
sprite(pQT).movieRate=0
pMyControl=0
go pReturnMarker
end if
end if
end
on getPropertyDescriptionList me
if not the currentSpriteNum then exit
vPDList=[:]
setaProp vPDList, #pQT, [#comment:"Which QT sprite",
#format:#string, #default:0]
setaProp vPDList, #pStart, [#comment:"Range start",
#format:#integer, #default:0]
setaProp vPDList, #pEnd, [#comment:"Range end",
#format:#integer, #default:0]
setaProp vPDList, #pVolume, [#comment:"Volume",
#format:#volume, #default:0]
setaProp vPDList, #pReturnMarker, [#comment:"Return to
Marker", #format:#marker, #default:0]
return vPDList
end getPropertyDescriptionList

Recovery Point creation fails because change traking has been marked inconsistent

I have a Hyper-v Cluster that is backed up using DPM 2012 SP1, for the last week when recovery point creation attempts to run I receive the following error message.
Change Tracking has been marked inconsistent due to one of the following reasons
1. Unexpected shutdown of the protected server
2. Unforeseen issue in DPM Bitmap failover during cluster failover of one or more datasources sharing the tracked volume. (ID 30501 Details: The parameter is incorrect (0x80070057))
After this error it performs a consistency check, it completes and a backup is stored, but as soon as it does another recovery point creation it fails again with the same error.
I have a Server 2012 R2 Hyper-v cluster with 2 virtual hosts and a quorum disk acting as the deciding vote. The backups completed for a month prior to this with no problems. No event seems to have triggered this problem it is just completely out of the blue.
I have update roll-up 8 on DPM and have both hosts within the cluster updated. They seem to consistently fail on one virtual host and intermittently fail on the other virtual host.
The event logs do not have any errors other than Event ID 1 VDS basic provider

Hi,
Lets see if cleaning up all the filter bitmaps clears up the problem.
To get to a clean state please delete DpmFilter* files from “System Volume Information” using following steps.
1. Open an administrative command prompt and run:
       C:\>fltmc unload DpmFilter (run on all cluster nodes)
2) From one of the Cluster nodes, run:
       C:\>psexec -s cmd (psexec is
www.sysinternals.com tool used to run cmd under system account)
3) In this new command prompt (running as system) run:
       C:\>CD C:\ClusterStorage
       C:\ClusterStorage>For /d %i in (volume*) do del /s "%i\System Volume Information\DpmFilter*"
Note: The * includes (DPMFilterBitmap{Guid}, DPMFilterStatus, DPMFilterLog, DPMFilterTrace*)
4) verify files are deleted by running
        “dir /s /b DpmFilter*”
        exit
5) Then load the filter again on all nodes
       C:\>fltmc load DpmFilter (on all cluster nodes)
6) Run DPM Consistency check against all the VM's to re-start normal protection.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Defining End point

Hi all,
I have a standalone XI 2.0 and my scenario is
file - XI - idoc (R/3)
i have the flat file in my XI box and im using inbound file adapter.
but i have a problem in defining the end point .
im getting an error message like
end point not defined for the sender system
my sender system is XI and my receiver system is R/3
im using file inbound adapter and idoc outbound adapter.
i have defined the end point for the receiver system as idoc.
wht will be my sender system endpoint .
if any has any idea pls help me.
thankx,
shree

Hi Shree,
Yes, it's true that in your case the flat file my in fact reside on the XI machine. However, from an XI point of view, you must still register the file adapter first within the SLD and then do the appropriate configuration within XI as Bjorn mentioned. Consider a situation where you may have a file to file scenario with XI performing transformation in the middle...in this case you need two "logical" systems here even though they are installed on the same physical box. One for the first file adapter instance and another for the second file adapter instance.
Good luck!!!
...Scottd

Solution: order delivery message for each end-point of many end-points

Hello,
Does anyone can help me find a solution to a problem I have.
Scenario: I have to develop a project with the OSB, and between the various services that I have to develop one have the following requirements.
I have a system that has multiple end-point (sub-systems; 1200 sub-systems), to whom I send a message (and only one), and these must be delivered in order (sequentially for each sub-system) .
These messages came from a JMS queue (could be topic).
Can anyone give some tips, how can I develop my components (proxy service) in order to ensure the delivery of messages in sequence for each sub-system without having to deploy multiple proxy service (one for each sub-system).
Thanks for any help.
Miguel

Hi Miguel,
Strange requirement but easy to implement. Create a XML which has all the end-points in it (you may create a simple structure line <EndpointList><Endpoint>EndPoint1</Endpoint><Endpoint>EndPoint2</Endpoint>.......</EndPointList>). Upload this xml as a X-Query resource in OSB. Use For each action in message flow (in request-response pipeline) and traverse on each and every EndPoint node in above created XML and from inside that use use publish/dynamic publish action.
Use Routing options: Modify any or all of the following properties in the outbound request: URI, Quality of Service, Mode, Retry parameters, Message Priority.
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/userguide/modelingmessageflow.html
http://download.oracle.com/docs/cd/E13159_01/osb/docs10gr3/eclipsehelp/tasks.html#wp1111432
Make sure that in the EndPointList XML you put the end-points in the sequence you want.
Regards,
Anuj

How do emulate multiple calls to same end point in Composite Test Suite

Can any one help with a problem I face with a composite test suite? I have a composite that has 5 main activities and after each activity it logs a status in a business database. This uses the same end point each time to log a status just passing a different status at each point.
When I create a test in the SOA Suite test suite I can create an Assertion for the first status call to check that the status us being created correctly but the second time the end point gets called the status is different and therefore the overall test fails.
Does anyone know how I can create multiple assertions in a test for the same end point in the same test?

Hi battlFrog,
>>I want to change the end point address to this service that is now in the solution, but not sure what the address would be.
What do you mean about the above message? I wonder if you want to let the client to reference to the service which is now in the solution, but not pointing to a service on your test server. If so, first please try to make sure that service
which is now in the solution can work well. After that please try to use the "Add Services Reference" to help you reference the service which is now in the solution. Once it finishes, you can get the correct endpoint address in your client config
file.
Besides, if your service is a self-host application, you can change the service address in the service side by modifying the baseaddress, if your service host in the IIS, you can modify the service address by doing some IIS configuration.
If I have misunderstood you, please feel free to let me know.
Best Regards,
Amy Peng
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Unable to access following end point(s)

Hi All,
I am facing very strange thing in my BPEL.
Third party is sending message to my SOA BPEL process.Starting point of the (input variable place) is not showing the message for some inputs from third party.For some input messages of third party, BPEL is taking messages properly and it is also showing messages.It is also executing whole process propely.
But some For some inputs(problem related inputs)It is showing below thing at the input message(receive activity):
<message>SOA returned no detail.</message>
But That BPEL process is having further transform and assign activities in that.The contents of the message is coming in those activities (but strange thing is it is not coming in BPEL intial activity.).
Note : What I observed from some input messages(for BPEL that I am getting problem) , payload size is very high.So SOA is not able to show or load messages properly.
I am also getting'
'Unable to access following end points' along with the errors'.I think it may be related SOA infra memory issue'
Please help me in this as I am stuck in production issue.It is very urgent.
Is there any way I can make my BPEL try access large payloads? I think it is the problem of not accepting large payloads.

Hi karan,
Thank you very much for your reply to my question.I will also try to change the message size by informing my client SOA admin people according to you.
Regarding the scenario that you are asking , I already mentioned clearly above(When I first posted this question).Anyways I am again copying those details below:
Starting of Scenario explanation:
I am facing very strange thing in my BPEL.
Third party is sending message to my SOA BPEL process.Starting point of the (input variable place) is not showing the message for some inputs from third party.For some input messages of third party, BPEL is taking messages properly and it is also showing messages.It is also executing whole process propely.
But some For some inputs(problem related inputs)It is showing below thing at the input message(receive activity):
<message>SOA returned no detail.</message>
But That BPEL process is having further transform and assign activities in that.The contents of the message is coming in those activities (but strange thing is it is not coming in BPEL intial activity.).
Note : What I observed from some input messages(for BPEL that I am getting problem) , payload size is very high.So SOA is not able to show or load messages properly.
I am also getting'
'Unable to access following end points' along with the errors'.I think it may be related SOA infra memory issue'
Please help me in this as I am stuck in production issue.It is very urgent.
Is there any way I can make my BPEL try access large payloads? I think it is the problem of not accepting large payloads.
ending of Scenario explanation:

Refresh Callable Object if changes are made to VC Start/End points

Looking for some guidance on how to refresh a callable object once I have already brought it into my application.
I have a VC application that I can use as a callable object during my GP process. During design time, I can select it and see the start and end points. I then can map those values and use them in the GP.
If I go back and change the VC application (make a change to the start or end point ... like a new variable or name change) how do I get my GP to recognize that there is a new version of the VC application? Currently I have had to delete the CO and rebuild it...Id rather the tool tell me the version has changed and that I need to remap/group my values.
Note that if I change anything between the start or end point in the VC application there is no problem, since all the GP cares about are those start/end points and how they relate to the rest of the process.

Hello Mike,
It´s a pitty but there is no way to "update" VC based callable objects in GP, (in webdynpro callable objects there is an "update" button that allows to do that) , but with Visual Composer Callable Objects the only way is to create a new one.
Regards,
Marco.

End point creation problem

Similar Messages

Maybe you are looking for