End-to-End Workload Analysis: Architecture
Hi there,
I have read in training material about E2E Workload Analysis (from SAP) the following statement:
"On ABAP-based components, the workload related data is extracted from statistical files and is written in BI"
The picture in the training material shows, that e.g. Java and .Net needs a Diagnostics Agent. But for ABAP-based components only a RFC Interface is necessary.
Is it possible to use the E2E Workload Analysis without installing any Agent on the ABAP-System?
And are there any jobs which must be scheduled on the ABAP-System alternatively on the Solution Manager?
If I start the Workload Analysis and chose a ABAP-System, there are no statistical data.
Thanks for your reply!
Best regards,
Andreas
Hi there,
The ABAP systems connect using RFC, but it is just one of the required connections that are maintained among satellite and managing system. (this is actually established in the managed system configuration, step 1).
The actual data is collected by SMD Agent, that pools several other services in the sattelite system itself, such as SAPOSCOL and SAP CCMS.
There's a PDF attached to SAP note 1332428 called TroubleShootingGuideEhP1.pdf, go to page 4. The picture in this page is great to show how everything works. There you can see all the connections.
The answer to your question is no, unfortunately. Make sure you follow the "Managed System Configuration" in the solman_setup, this will ensure you have everything that is needed for workload analysis, including SMD Agent.
Please refer to note 1435043 to address what is needed for Workload Analsysis. Managed system configuration fits in item 5 of this note.
I hope this is helpful for you.
Best regards,
Guilherme Balbinot
Similar Messages
-
End-to-End workload monitor too slow
Hello,
have anyone found that while working with end-to-end workload monitor the perfornance of webdrynpro is really bad and slowly ?
what tool can we use to check performance of solution manager end-to-end worload monitor ?
thanks,
LuisHi Luis,
which LMService are you running ?
you could have a look at the Wily Introscope to check if there is any performance problem.
Have a look at document
Wily Introscope WebView User Guide 8.1
under
http://service.sap.com/diagnostics
-> media library
regards, Javier -
WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection
Hi all SDNers,
Help is needed on error "WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection".
This error occured on RCA -> Extractor FWK administration and go to managed system (PI) and from the log, i can see some extraction failed due to error message " Error when opening an RFC connection"
consequently, JAVA performance data is not appearing in RCA -> workload analysis but work fine for ABAP and adapter engine.
I've followed below notes and perform the troubleshooting step by step by still to no avail:
Note 1332428 - Missing data in service sessions from BI/CCDB
Note 1257308 - FAQ: Using EarlyWatch Alert
Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27
Note 1265070 - Diagnostics - Setup of Managed Systems
Note 1010428 - End-to-End Diagnostics
http://wiki.sdn.sap.com/wiki/display/SMSETUP/WorkloadAnalysis-Noapplicabledatafound
steps that have performed:
restarted agent
enlarge RFC resource cap for solmandiag and none
delete entire SID in SMSY and pull again from SLD, re-setup managed system
restart PI system
i've spent 2 days on troubleshooting this issue but lack of information in SMP and SDN, even in google.
in table E2E_EFWK_STATUS and extractor E2E_JAVA_EXTRACTOR_IF, i see all WLI_ID ended with RC 96, MESSAGE = Error when opening an RFC connection and LASTRECORDS = 0
I strongly believe this is the issue that causing no applicable data found for JAVA data.
fyi, we are on SOLMAN EHP1 SPS27.
Any kind advise is most welcome.
Thanks,
Nicholas ChangGosh! at last i found the solution!!
I appreciate those who tried to help and i''m sharing the solution as i believe this is the purpose of SDN Forum and help others Netweaver Chap who facing the same problem:
Problem faced:
Extractor failed intermittently for WORKLOAD ANALYSIS (Introscope Data) due to error message "Error when opening an RFC connection"
Due to the above error, performance data is not available in RCA workload analysis for J2EE engine.
Possible Solution:
1) Ensure both webadmin & SOLMANDIAG RFC working fine -> SM59 -> TCP/IP
2) go to SE16 -> E2E_RESOURCES and change the resourcecap to 10 for SOLMANDIAG
3) go to /smd/services -> Diagnostic System -> Advanced Setup -> Abap connectivity -> Connection Configuration and change server count to 10
4) Restart webadmin (step 3 & 4 can perform in VA too)
5) set gw/keepalive & gw/reg_keepalive to value 0 in RZ11 (without reboot of instance)
5) again go to SM59 -> TCP/IP -> SOLMANDIAG and put in the gateway host and gateway service correctly, don't leave this empty!!!! -
> This is the main solution to solve intermittent failed RFC for extractor.
Now, go back and monitor the extractor log and you should see no RFC error anymore and wait for 1 hour for the data to populate.
Thanks!
Nicholas Chang, -
Hi All,
I'm trying configure E2E monitoring. I configured all necessary steps, I can see my BI 4.1 system in SLD, also in SOLMAN, all “lights” are green. But if I start Root Cause Analysis>> Ent-to End Analysis>> My system>> Workload Analysis, I see this error "The systems you selected do not contain any software components currently supported by E2E Workload Analysis".It would be better if you can raise the question at Remote Supportability and Monitoring Tools
and or comment in the blog post How to generate and consume an E2E trace with BI4.x (for non-SolMan landscapes)
created by Toby Johnston
Do go through the note 1871260 - The systems you selected do not contain any software
components currently supported by E2E Workload analysis for SAP HANA
Hope they help. -
What is step by step in real time project i.e. end-to-end life cycle?
what is step by step in real time project i.e. end-to-end life cycle?
Hi Vamsi,
The below explanation gives you an idea of what is going to come after what in a software development.
These below stages are know as Software Development Life Cycle/Waterfall Model.
1. System/Information Engineering and Modeling
As software is always of a large system (or business), work begins by establishing the requirements for all system elements and then allocating some subset of these requirements to software. This system view is essential when the software must interface with other elements such as hardware, people and other resources. System is the basic and very critical requirement for the existence of software in any entity. So if the system is not in place, the system should be engineered and put in place. In some cases, to extract the maximum output, the system should be re-engineered and spruced up. Once the ideal system is engineered or tuned, the development team studies the software requirement for the system.
2. Software Requirement Analysis
This process is also known as feasibility study. In this phase, the development team visits the customer and studies their system. They investigate the need for possible software automation in the given system. By the end of the feasibility study, the team furnishes a document that holds the different specific recommendations for the candidate system. It also includes the personnel assignments, costs, project schedule, target dates etc.... The requirement gathering process is intensified and focussed specially on software. To understand the nature of the program(s) to be built, the system engineer or "Analyst" must understand the information domain for the software, as well as required function, behavior, performance and interfacing. The essential purpose of this phase is to find the need and to define the problem that needs to be solved .
3. System Analysis and Design
In this phase, the software development process, the software's overall structure and its nuances are defined. In terms of the client/server technology, the number of tiers needed for the package architecture, the database design, the data structure design etc... are all defined in this phase. A software development model is thus created. Analysis and Design are very crucial in the whole development cycle. Any glitch in the design phase could be very expensive to solve in the later stage of the software development. Much care is taken during this phase. The logical system of the product is developed in this phase.
4. Code Generation
The design must be translated into a machine-readable form. The code generation step performs this task. If the design is performed in a detailed manner, code generation can be accomplished without much complication. Programming tools like compilers, interpreters, debuggers etc... are used to generate the code. Different high level programming languages like C, C++, Pascal, Java are used for coding. With respect to the type of application, the right programming language is chosen.
5. Testing
Once the code is generated, the software program testing begins. Different testing methodologies are available to unravel the bugs that were committed during the previous phases. Different testing tools and methodologies are already available. Some companies build their own testing tools that are tailor made for their own development operations.
6. Maintenance
The software will definitely undergo change once it is delivered to the customer. There can be many reasons for this change to occur. Change could happen because of some unexpected input values into the system. In addition, the changes in the system could directly affect the software operations. The software should be developed to accommodate changes that could happen during the post implementation period.
Reward if helpful.
Thankyou,
Regards. -
No data in RunSAP workload analysis
Hi Experts,
I've installed solution manager 7.0 EHP1 and configured to execute End-to-End Analysis.
And I can use Wily Introscope Workstation to display realtime data and history data.
But in solution manager workcenter, I can't get any data from workload analysis.
I've used t-code CCMSBISETUP to setup BI and everything looks fine.
What other things should I check?
Thanks!Hello,
Please make sure that your system fulfills all the pre-requisites. The following note will point you to the right one depending on the release level of your system:
1274287 End-to-End Diagnostics
Make sure your systems are well defined, as of EHP1 is mandatory the use of SLD. Please check the following document:
http://service.sap.com/diagnostics
Media Library...
SAP Solution Manager Landscape Setup Guide
Further information can be found ate SAP Note 1435043.
1435043 E2E Workload Analysis - No applicable data found
Regards,
Allam Drebes -
Internal error int reply to ClientHello on ACE20 module with end-to-end SSL
Hello, world!
We have weird behaviour of our Cisco ACE20 module configured for end-to-end SSL (initiation+termination) - the module from time to time replies with SSLv3/TLSv1 alert "Fatal: internal error" message to the client right after client have sent 'ClientHello' SSL message. So sometimes SSL connection works and sometimes will be immediately closed due to this fatal error. The behaviour is very similar to the one described below:
CSCtc52085—After a client sends a ClientHello message, the SSL hand shake may fail with a fatal alert internal error sent by the ACE. This behavior is intermittent and may occur under the following conditions:
1. An SSL service is configured with the session-cache timeout command (session reuse).
2. SSL connections are aborted by the client after the client sends a ClientHello message to the service in condition 1 and before an internal resource state is changed. This behavior puts the internal resource in an improper state. This error is very timing sensitive.
3. The next connection that uses the internal resource in the improper state fails with a fatal alert internal error. That connection does not have to go to the service in condition 1 to experience this error because the internal resource is shared by all the SSL services.
Workaround: None.
But we have software version A2(3.1) and this bug must have been resolved in this release (at least it's listed in resolved caveats section of release notes).
Software
loader: Version 12.2[123]
system: Version A2(3.1) [build 3.0(0)A2(3.1)]
system image file: [LCP] disk0:c6ace-t1k9-mz.A2_3_1.bin
Again, we don't have session-cache timeout configured on the ACE.
On the ACE we have following stats:
ACE1/VC_UNIX# sh stats crypto server
SSL Server Statistics:
SSL alert CLOSE_NOTIFY rcvd: 0
SSL alert UNEXPECTED_MSG rcvd: 0
SSL alert BAD_RECORD_MAC rcvd: 0
SSL alert DECRYPTION_FAILED rcvd: 0
SSL alert RECORD_OVERFLOW rcvd: 0
SSL alert DECOMPRESSION_FAILED rcvd: 0
SSL alert HANDSHAKE_FAILED rcvd: 0
SSL alert NO_CERTIFICATE rcvd: 0
SSL alert BAD_CERTIFICATE rcvd: 0
SSL alert UNSUPPORTED_CERTIFICATE rcvd: 0
SSL alert CERTIFICATE_REVOKED rcvd: 0
SSL alert CERTIFICATE_EXPIRED rcvd: 0
SSL alert CERTIFICATE_UNKNOWN rcvd: 0
SSL alert ILLEGAL_PARAMETER rcvd: 0
SSL alert UNKNOWN_CA rcvd: 0
SSL alert ACCESS_DENIED rcvd: 0
SSL alert DECODE_ERROR rcvd: 0
SSL alert DECRYPT_ERROR rcvd: 0
SSL alert EXPORT_RESTRICTION rcvd: 0
SSL alert PROTOCOL_VERSION rcvd: 0
SSL alert INSUFFICIENT_SECURITY rcvd: 0
SSL alert INTERNAL_ERROR rcvd: 0
SSL alert USER_CANCELED rcvd: 0
SSL alert NO_RENEGOTIATION rcvd: 0
SSL alert CLOSE_NOTIFY sent: 0
SSL alert UNEXPECTED_MSG sent: 1
SSL alert BAD_RECORD_MAC sent: 0
SSL alert DECRYPTION_FAILED sent: 0
SSL alert RECORD_OVERFLOW sent: 0
SSL alert DECOMPRESSION_FAILED sent: 0
SSL alert HANDSHAKE_FAILED sent: 2
SSL alert NO_CERTIFICATE sent: 0
SSL alert BAD_CERTIFICATE sent: 0
SSL alert UNSUPPORTED_CERTIFICATE sent: 0
SSL alert CERTIFICATE_REVOKED sent: 0
SSL alert CERTIFICATE_EXPIRED sent: 0
SSL alert CERTIFICATE_UNKNOWN sent: 0
SSL alert ILLEGAL_PARAMETER sent: 0
SSL alert UNKNOWN_CA sent: 0
SSL alert ACCESS_DENIED sent: 0
SSL alert DECODE_ERROR sent: 0
SSL alert DECRYPT_ERROR sent: 0
SSL alert EXPORT_RESTRICTION sent: 0
SSL alert PROTOCOL_VERSION sent: 0
SSL alert INSUFFICIENT_SECURITY sent: 0
SSL alert INTERNAL_ERROR sent: 16
SSL alert USER_CANCELED sent: 0
SSL alert NO_RENEGOTIATION sent: 0
SSLv2 client hello received: 0
SSLv3 client hello received: 0
TLSv1 client hello received: 68
SSLv3 negotiated protocol: 0
TLSv1 negotiated protocol: 68
SSLv3 full handshakes: 0
SSLv3 resumed handshakes: 0
Cipher sslv3_rsa_rc4_128_md5: 0
Cipher sslv3_rsa_rc4_128_sha: 0
Cipher sslv3_rsa_des_cbc_sha: 0
Cipher sslv3_rsa_3des_ede_cbc_sha: 0
Cipher sslv3_rsa_exp_rc4_40_md5: 0
Cipher sslv3_rsa_exp_des40_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_md5: 0
Cipher sslv3_rsa_exp1024_des_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_sha: 0
Cipher sslv3_rsa_aes_128_cbc_sha: 0
Cipher sslv3_rsa_aes_256_cbc_sha: 0
TLSv1 full handshakes: 33
TLSv1 resumed handshakes: 0
Cipher tlsv1_rsa_rc4_128_md5: 68
Cipher tlsv1_rsa_rc4_128_sha: 0
Cipher tlsv1_rsa_des_cbc_sha: 0
Cipher tlsv1_rsa_3des_ede_cbc_sha: 0
Cipher tlsv1_rsa_exp_rc4_40_md5: 0
Cipher tlsv1_rsa_exp_des40_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_md5: 0
Cipher tlsv1_rsa_exp1024_des_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_sha: 0
Cipher tlsv1_rsa_aes_128_cbc_sha: 0
Cipher tlsv1_rsa_aes_256_cbc_sha: 0
Total SSL client authentications: 0
Failed SSL client authentications: 0
SSL authentication cache hits: 0
SSL static CRL lookups: 0
SSL best effort CRL lookups: 0
SSL CRL lookup cache hits: 0
SSL revoked certificates: 0
Total SSL server authentications: 0
Failed SSL server authentications: 0
Session headers extracted: 0
Session headers failed: 0
Server cert headers extracted: 0
Server cert headers failed: 0
Client cert headers extracted: 0
Client cert headers failed: 0
Headers truncated: 0
Redirects due to cert not yet valid: 0
Redirects due to cert expired: 0
Redirects due to unknown issuer cert: 0
Redirects due to cert revoked: 0
Redirects due to no client cert: 0
Redirects due to no CRL available: 0
Redirects due to expired CRL: 0
Redirects due to bad cert signature: 0
Redirects due to other cert error: 0
Internal error: 27
Handshake FlushRX operations: 0
Handshake FlushTX operations: 0
Xscale messages rcvd from ME: 1313330
Xscale messages sent to ME: 2041768
Finish msg split across ssl recs: 0
Fasttx msg ring full: 0
SSL_ME tx msg ring full: 0
N2 encrypt_record: 0
N2 decrypt_record: 144433
N2 random: 439915
N2 handshake_hash: 878094
N2 hash: 0
N2 gpop_master: 291164
N2 gpop_import_master_secret: 5
N2 gpop_pkcs1v15enc: 144430
N2 gpop_pkcs1v15enc_crt: 0
N2 gpop_finish: 291140
N2 gpop_verify: 0
N2 gpop_pkcs1v15dec: 0
N2 gpop_pkcs1v15dec_crt: 146752
N2 rsa_server_full: 15
N2 resume: 12
UXP A: 24576
UXP B: 0
The "Internal error" counter increases with failed connections.
Printscreen from wireshark attached.
Maybe someone has the problem like ours? I have no idea how to troubleshoot these "internal errors"... :-(
Thanks for your replies.Thanks for your reply.
The problem is not server-related, I have exactly the same situation if I do SSL termination only, with unencrypted connection between ACE and backend servers (another servers, with blank apache installed and listening on 443 port for non-SSL traffic) - generally speaking, it works, but often with these "internal errors" - not suitable for production.
Here is the output from the commands
# show np 1 me-stats -E0
SSL Server Statistics:
SSL alert CLOSE_NOTIFY rcvd: 0
SSL alert UNEXPECTED_MSG rcvd: 0
SSL alert BAD_RECORD_MAC rcvd: 0
SSL alert DECRYPTION_FAILED rcvd: 0
SSL alert RECORD_OVERFLOW rcvd: 0
SSL alert DECOMPRESSION_FAILED rcvd: 0
SSL alert HANDSHAKE_FAILED rcvd: 0
SSL alert NO_CERTIFICATE rcvd: 0
SSL alert BAD_CERTIFICATE rcvd: 0
SSL alert UNSUPPORTED_CERTIFICATE rcvd: 0
SSL alert CERTIFICATE_REVOKED rcvd: 0
SSL alert CERTIFICATE_EXPIRED rcvd: 0
SSL alert CERTIFICATE_UNKNOWN rcvd: 0
SSL alert ILLEGAL_PARAMETER rcvd: 0
SSL alert UNKNOWN_CA rcvd: 0
SSL alert ACCESS_DENIED rcvd: 0
SSL alert DECODE_ERROR rcvd: 0
SSL alert DECRYPT_ERROR rcvd: 0
SSL alert EXPORT_RESTRICTION rcvd: 0
SSL alert PROTOCOL_VERSION rcvd: 0
SSL alert INSUFFICIENT_SECURITY rcvd: 0
SSL alert INTERNAL_ERROR rcvd: 0
SSL alert USER_CANCELED rcvd: 0
SSL alert NO_RENEGOTIATION rcvd: 0
SSL alert CLOSE_NOTIFY sent: 0
SSL alert UNEXPECTED_MSG sent: 0
SSL alert BAD_RECORD_MAC sent: 0
SSL alert DECRYPTION_FAILED sent: 0
SSL alert RECORD_OVERFLOW sent: 0
SSL alert DECOMPRESSION_FAILED sent: 0
SSL alert HANDSHAKE_FAILED sent: 0
SSL alert NO_CERTIFICATE sent: 0
SSL alert BAD_CERTIFICATE sent: 0
SSL alert UNSUPPORTED_CERTIFICATE sent: 0
SSL alert CERTIFICATE_REVOKED sent: 0
SSL alert CERTIFICATE_EXPIRED sent: 0
SSL alert CERTIFICATE_UNKNOWN sent: 0
SSL alert ILLEGAL_PARAMETER sent: 0
SSL alert UNKNOWN_CA sent: 0
SSL alert ACCESS_DENIED sent: 0
SSL alert DECODE_ERROR sent: 0
SSL alert DECRYPT_ERROR sent: 0
SSL alert EXPORT_RESTRICTION sent: 0
SSL alert PROTOCOL_VERSION sent: 0
SSL alert INSUFFICIENT_SECURITY sent: 0
SSL alert INTERNAL_ERROR sent: 0
SSL alert USER_CANCELED sent: 0
SSL alert NO_RENEGOTIATION sent: 0
SSLv2 client hello received: 0
SSLv3 client hello received: 0
TLSv1 client hello received: 0
SSLv3 negotiated protocol: 0
TLSv1 negotiated protocol: 0
SSLv3 full handshakes: 0
SSLv3 resumed handshakes: 0
Cipher sslv3_rsa_rc4_128_md5: 0
Cipher sslv3_rsa_rc4_128_sha: 0
Cipher sslv3_rsa_des_cbc_sha: 0
Cipher sslv3_rsa_3des_ede_cbc_sha: 0
Cipher sslv3_rsa_exp_rc4_40_md5: 0
Cipher sslv3_rsa_exp_des40_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_md5: 0
Cipher sslv3_rsa_exp1024_des_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_sha: 0
Cipher sslv3_rsa_aes_128_cbc_sha: 0
Cipher sslv3_rsa_aes_256_cbc_sha: 0
TLSv1 full handshakes: 0
TLSv1 resumed handshakes: 0
Cipher tlsv1_rsa_rc4_128_md5: 0
Cipher tlsv1_rsa_rc4_128_sha: 0
Cipher tlsv1_rsa_des_cbc_sha: 0
Cipher tlsv1_rsa_3des_ede_cbc_sha: 0
Cipher tlsv1_rsa_exp_rc4_40_md5: 0
Cipher tlsv1_rsa_exp_des40_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_md5: 0
Cipher tlsv1_rsa_exp1024_des_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_sha: 0
Cipher tlsv1_rsa_aes_128_cbc_sha: 0
Cipher tlsv1_rsa_aes_256_cbc_sha: 0
Total SSL client authentications: 0
Failed SSL client authentications: 0
SSL authentication cache hits: 0
SSL static CRL lookups: 0
SSL best effort CRL lookups: 0
SSL CRL lookup cache hits: 0
SSL revoked certificates: 0
Total SSL server authentications: 0
Failed SSL server authentications: 0
Session headers extracted: 0
Session headers failed: 0
Server cert headers extracted: 0
Server cert headers failed: 0
Client cert headers extracted: 0
Client cert headers failed: 0
Headers truncated: 0
Redirects due to cert not yet valid: 0
Redirects due to cert expired: 0
Redirects due to unknown issuer cert: 0
Redirects due to cert revoked: 0
Redirects due to no client cert: 0
Redirects due to no CRL available: 0
Redirects due to expired CRL: 0
Redirects due to bad cert signature: 0
Redirects due to other cert error: 0
Internal error: 0
SSL Client Statistics:
SSL alert CLOSE_NOTIFY rcvd: 0
SSL alert UNEXPECTED_MSG rcvd: 0
SSL alert BAD_RECORD_MAC rcvd: 0
SSL alert DECRYPTION_FAILED rcvd: 0
SSL alert RECORD_OVERFLOW rcvd: 0
SSL alert DECOMPRESSION_FAILED rcvd: 0
SSL alert HANDSHAKE_FAILED rcvd: 0
SSL alert NO_CERTIFICATE rcvd: 0
SSL alert BAD_CERTIFICATE rcvd: 0
SSL alert UNSUPPORTED_CERTIFICATE rcvd: 0
SSL alert CERTIFICATE_REVOKED rcvd: 0
SSL alert CERTIFICATE_EXPIRED rcvd: 0
SSL alert CERTIFICATE_UNKNOWN rcvd: 0
SSL alert ILLEGAL_PARAMETER rcvd: 0
SSL alert UNKNOWN_CA rcvd: 0
SSL alert ACCESS_DENIED rcvd: 0
SSL alert DECODE_ERROR rcvd: 0
SSL alert DECRYPT_ERROR rcvd: 0
SSL alert EXPORT_RESTRICTION rcvd: 0
SSL alert PROTOCOL_VERSION rcvd: 0
SSL alert INSUFFICIENT_SECURITY rcvd: 0
SSL alert INTERNAL_ERROR rcvd: 0
SSL alert USER_CANCELED rcvd: 0
SSL alert NO_RENEGOTIATION rcvd: 0
SSL alert CLOSE_NOTIFY sent: 0
SSL alert UNEXPECTED_MSG sent: 4108
SSL alert BAD_RECORD_MAC sent: 0
SSL alert DECRYPTION_FAILED sent: 0
SSL alert RECORD_OVERFLOW sent: 0
SSL alert DECOMPRESSION_FAILED sent: 0
SSL alert HANDSHAKE_FAILED sent: 63355
SSL alert NO_CERTIFICATE sent: 0
SSL alert BAD_CERTIFICATE sent: 0
SSL alert UNSUPPORTED_CERTIFICATE sent: 0
SSL alert CERTIFICATE_REVOKED sent: 0
SSL alert CERTIFICATE_EXPIRED sent: 0
SSL alert CERTIFICATE_UNKNOWN sent: 0
SSL alert ILLEGAL_PARAMETER sent: 0
SSL alert UNKNOWN_CA sent: 0
SSL alert ACCESS_DENIED sent: 0
SSL alert DECODE_ERROR sent: 0
SSL alert DECRYPT_ERROR sent: 0
SSL alert EXPORT_RESTRICTION sent: 0
SSL alert PROTOCOL_VERSION sent: 0
SSL alert INSUFFICIENT_SECURITY sent: 0
SSL alert INTERNAL_ERROR sent: 37662
SSL alert USER_CANCELED sent: 0
SSL alert NO_RENEGOTIATION sent: 0
SSLv2 client hello received: 0
SSLv3 client hello received: 0
TLSv1 client hello received: 0
SSLv3 negotiated protocol: 0
TLSv1 negotiated protocol: 4062020
SSLv3 full handshakes: 0
SSLv3 resumed handshakes: 0
Cipher sslv3_rsa_rc4_128_md5: 0
Cipher sslv3_rsa_rc4_128_sha: 0
Cipher sslv3_rsa_des_cbc_sha: 0
Cipher sslv3_rsa_3des_ede_cbc_sha: 0
Cipher sslv3_rsa_exp_rc4_40_md5: 0
Cipher sslv3_rsa_exp_des40_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_md5: 0
Cipher sslv3_rsa_exp1024_des_cbc_sha: 0
Cipher sslv3_rsa_exp1024_rc4_56_sha: 0
Cipher sslv3_rsa_aes_128_cbc_sha: 0
Cipher sslv3_rsa_aes_256_cbc_sha: 0
TLSv1 full handshakes: 4015344
TLSv1 resumed handshakes: 0
Cipher tlsv1_rsa_rc4_128_md5: 0
Cipher tlsv1_rsa_rc4_128_sha: 0
Cipher tlsv1_rsa_des_cbc_sha: 0
Cipher tlsv1_rsa_3des_ede_cbc_sha: 0
Cipher tlsv1_rsa_exp_rc4_40_md5: 0
Cipher tlsv1_rsa_exp_des40_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_md5: 0
Cipher tlsv1_rsa_exp1024_des_cbc_sha: 0
Cipher tlsv1_rsa_exp1024_rc4_56_sha: 0
Cipher tlsv1_rsa_aes_128_cbc_sha: 4062020
Cipher tlsv1_rsa_aes_256_cbc_sha: 0
Total SSL client authentications: 0
Failed SSL client authentications: 0
SSL authentication cache hits: 4059147
SSL static CRL lookups: 0
SSL best effort CRL lookups: 0
SSL CRL lookup cache hits: 0
SSL revoked certificates: 0
Total SSL server authentications: 4059888
Failed SSL server authentications: 0
Session headers extracted: 0
Session headers failed: 0
Server cert headers extracted: 0
Server cert headers failed: 0
Client cert headers extracted: 0
Client cert headers failed: 0
Headers truncated: 0
Redirects due to cert not yet valid: 0
Redirects due to cert expired: 0
Redirects due to unknown issuer cert: 0
Redirects due to cert revoked: 0
Redirects due to no client cert: 0
Redirects due to no CRL available: 0
Redirects due to expired CRL: 0
Redirects due to bad cert signature: 0
Redirects due to other cert error: 0
Internal error: 20380
Handshake FlushRX operations: 0
Handshake FlushTX operations: 0
Xscale messages rcvd from ME: 12092768
Xscale messages sent to ME: 0x0176adac
Finish msg split across ssl recs: 0
Fasttx msg ring full: 0
SSL_ME tx msg ring full: 0
N2 encrypt_record: 0
N2 decrypt_record: 4015344
N2 random: 8148797
N2 handshake_hash: 4322635
N2 hash: 0
N2 gpop_master: 4041700
N2 gpop_import_master_secret: 0
N2 gpop_pkcs1v15enc: 4041700
N2 gpop_pkcs1v15enc_crt: 0
N2 gpop_finish: 4031710
N2 gpop_verify: 0
N2 gpop_pkcs1v15dec: 0
N2 gpop_pkcs1v15dec_crt: 0
N2 rsa_server_full: 0
N2 resume: 0
UXP A: 24576
UXP B: 0
# show np 1 me-stats "-shttp -v"
HTTP Statistics (Current)
Unknown msgs received: 0 0
Data rx msgs received: 288293958 4
TCP proxy rx msgs received: 9816884 1
Ack trigger rx msgs received: 0 0
TCP event rx msgs received: 52961189 2
Dest decision tx msgs received: 55155089 1
LB dest decision tx msgs received: 0 0
Close tx msgs received: 83942817 0
Inspect allow tx msgs received: 0 0
Inspect drop tx msgs received: 0 0
DRAM blocks read: 577612022 16
Buffers dropped: 2702255 0
Regex states read: 38438408 25
Unproxy cancellations: 0 0
Redundant closes: 2990271 0
Internal errors: 0 0
Conn mismatch errors: 2748628 0
Exception with close: 6 0
Dest errors: 1 0
Total Packet count (Tx & Rx): 490169937 8
Stop regex: 12 0
(Context 5 Statistics)
Parse result LB msgs sent: 121180 0
Drop: LB queue full: 0 0
Parse result Inspect msgs sent: 0 0
Drop: Inspect queue full: 0 0
TCP data msgs sent: 96215 0
TCP queue full: 0 0
SSL data msgs sent: 516306 0
SSL queue full: 0 0
TCP fin msgs sent: 939 0
TCP rst msgs sent: 147 0
SSL fin msgs sent: 102907 0
SSL rst msgs sent: 38548 0
Bounced fin msgs sent: 1481 0
Bounced rst msgs sent: 2 0
Unproxy msgs sent: 25333 0
Drain msgs sent: 113966 0
Reuse msgs sent: 2304 0
Particles read: 1448314 0
HTTP requests: 121688 0
Reproxied requests: 17680 0
Headers inserted: 3825 0
Headers removed: 51 0
Headers rewritten: 0 0
HTTP redirects: 0 0
HTTP chunks: 42154 0
Unproxy conns: 25325 0
Pipelined requests: 0 0
Pipeline flushes: 0 0
Whitespace appends: 0 0
Response entries recycled: 24493 0
Second pass parsing: 0 0
Vserver mismatch errors: 5 0
Analysis errors: 0 0
Static parse errors: 20 0
Max parselen errors: 0 0
Resource errors: 75 0
Invalid path errors: 0 0
Bad HTTP version errors: 0 0
Header insert errors: 75 0
Header rewrite errors: 0 0
Invalid policy errors: 0 0
Invalid rserver errors: 0 0
Recycled requests: 0 0
SSL header insert success: 0 0
SSL header insert errors: 0 0
SSL spoof header deleted: 0 0
Drop: RST pipelined request: 0 0
There's nothing in ACE logs.
Forgot to mention - we are running ACE in one-arm mode, but I don't believe it makes a difference. -
SAP HANA Modeling Sample end to end Project
Dear All,
I got trained on SAP HANA Modeling and BODS recently, and in process of learning SAP BO. My core is SAP EP and don't have indepth knowledge on SAP BI and Functional aspects.
I am working on few sample applications but I would like to do a Sample end to end project on real time scenarios/POC's.
Do you have any sample requirement documents that helps to do a end to end project(real time scenarios) . Does SAP store any piolet project requirement specs for public use which help to gain real time experience.
Kindly help me on this.
Thanks & Regards,
Rajeev Bikkanihi look into this
Role of a Functional Consultant in an End To End Implementation
1. Functional consultant is expected to generate knowledge about the current business process, design current business flows, study current business processes and its complication, in all we can say getting through with current business setup. Flow diagrams and DFD are prepared, most of the time in Vision format, all this forms the part of AS IS document.
2. Everything configured has to be documented as per their categories in the form of predefined templates, these have to be then approved by the team leads or who ever the consultant is reporting to.
3. Mapping and GAP analysis is done for each module, I have seen people defining integration after mapping, gap analysis and configuration is done, but as per my experience in implementation, it is a simultaneous process.
4. Before starting configuring future business processes in SAP, the DFD/ERD are prepared, this documentation is called TO BE, which can be also siad as the result of mapping and gap analysis.
5. Sometimes Functional consultants are also expected to prepare test scripts for testing the configured scenarios.
6. End user manual and user training is also expected from F.Consultants.
The project normally starts off with a Kick off meeting in which the team size, team members, reporting system, responsibilities, duties, methodology, dates and schedules, working hours which have been predicided are formally defined. -
FR End To End KeepAlive Vs ATM OAM
Hi,
Actually we have an infrastructure like the one that is represented in the image below.
The Local Router has two TGU's with DLCI 20. The Remote Sites can be connect to one TGU or to another one.
On both Sites we have the End To End KeepAlive to make an ISDN to be ready when the FR link goes down.
We need to migrate the actual infrastructure to a E3 - 34mbps link over ATM and the Architecture will become the follow:
In This way the TGUs will "collapse" in the new 34mbps ATM link.
The ISP in this architecture needs to "switch" ATM/FR Packets between the Local Router Vs Remote Routers.
Now the question...the doubt...
If We enable the OAM on the sub-interfaces that we'll create on the Local Router (one for each remote router), the "compatibility" between the EEK and OAM is effective?There is no support for end-to-end keepalive in ATM/FR inteworking.
Note, ATM and FR are both are obsolete techonolgies today. You should look for a pure IP solution, e.g MPLS for best results. -
RFC Connection Error (for end-to-end Monitoring)
Hi,
I am configure End-to-End monitoring in XI 3.0 SP20, PMI does't show data in end-to-end monitoring... anyway!!! I check RFC connection PMI
RFC destination name: PMIXQA90020080827
in TEST connection I am getting an error: "Group PUBLIC not Found" where may I define that PUBLIC to solve this problem please let me know.... thanks
and what is Group PUBLIC in RFC ??? what does it do???
Is there any notes I can read for related issue, please help me out this
Thanks a lot in advanced
Edited by: issue2008 issue on Aug 28, 2008 10:03 AMThanks for reply... SURE I can tell you
Connection Type: 3 R/3 connection
ScreenShot shows blow:
http://www.flickr.com/photos/25222280@N03/2806290586/sizes/o/
Thanks
Edited by: issue2008 issue on Aug 28, 2008 10:20 AM -
Hi All,
We are using Business Objects XI R2 SP2 and were using Vintella End to End SSO SSO with SQL Server 2005 Database.
Yesterday we created a new service account for SQL Server and ran the SetSpn with this account.
We are able to SSO to Infoview but when we are running crystal report on demand we are getting error "The database logon information for this report is either incomplete or incorrect"
If we schedule the report and give database logon credentials it works fine.
Are there any other changes that need to be done.
Please assist.
Thanks in advance for your help.
V.Since you didn't change your bo config the problem is probably with Microsoft. Open a case with them if you have to. You can try opening a case with us as well to make sure there are no options on the BO side.
Try putting this http://support.microsoft.com/?id=262177 BO server and SQL server
Regards,
Tim -
Hello All,
Attached is the link explaining SAP Transportation Management Overview and a system demonstration of End to End Process Flow.
Link:
TM Overview + End to End Process Flow - YouTube
Thanks and best regards,
NavinVery Good Demo Navin
-
Performance end to end testing and comparison between MPLS VPN and VPLS VPN
Hi,
I am student of MSc Network Security and as for my project which is " Comparison between MPLS L3 VPN and VPLS VPN, performance monitoring by end to end testing " I have heard a lot of buzz about VPLS as becoming NGN, I wanted to exppore that and produce a comparison report of which technology is better. To accomplish this I am using GNS3, with respect to the MPLS L3 VPN lab setup that is not a problem but I am stuck at the VPLS part how to setup that ? I have searched but unable to find any cost effective mean, even it is not possible in the university lab as we dont have 7600 series
I would appreciate any support, guidence, advice.
Thanks
ShahbazHi Shahbaz,
I am not completely sure I understand your request.
MPLS VPN and VPLS are 2 technologies meant to address to different needs, L3 VPN as opposed as L2 VPN. Not completely sure how you would compare them in terms of performance. Would you compare the performance of a F1 racing car with a Rally racing car?
From the ISP point of view there is little difference (if we don't want to consider the specific inherent peculiarities of each technology) , as in the very basic scenarios we can boil down to the following basic operations for both:
Ingress PE impose 2 labels (at least)
Core Ps swap top most MPLS label
Egress PE removes last label exposing underlying packet or frame.
So whether the LSRs deal with underlying L2 frames or L3 IP packets there is no real difference in terms of performance (actually the P routers don't even notice any difference).
About simulators, I am not aware of anyone able to simulate a L2 VPN (AtoM or VPLS).
Riccardo -
Cannot get end-to-end single sign-on to work in CR XI
Post Author: yarg
CA Forum: Authentication
Hello,
I'm looking for some help please. I have used Crystal Reports XI fairly extensively over the past year (designing reports mainly), and have now been tasked with getting CR Server XI up and running so that team members can view reports pertaining to them via a web browser. I have installed CR Server XI on a Windows Server 2003 VM and have followed every single step in the admin guide on pg285 about how to implement end-to-end single sign-on using Kerberos.
However, every time I try to access InfoView I get prompted for AD credentials. Single sign-on just is not working and there are no visible error messages to indicate why. Could anyone please offer suggestions? Even telling me whether there is any sort of log file which I can check to see what's happening behind the scenes would be very helpful.
Many thanks in advance,
GraemePost Author: colin mackenzie
CA Forum: Authentication
Hello Graeme.
Have you tested it with using the user settings under the Enterprise Authentication?
Does your reports and objects work for the user when connected with the "Enterprise Authentication Type? -
Error in End-to-End Monitoring
Dear All,
when i click display on End-to-End Monitoring, and then not accepting any user etc and the following error message come up
Logon failed error
Call of URL http://sapxi:50010/sap/bc/bsp/sap/spi_monitor/monitor.do terminated due to error in logon data.
Note
Logon performed in system XID .
Logon performed for client 100 and language EN.
What can I do?
Check the validity of your SSO ticket for this system.
If you do not yet have a user ID, contact your system administrator.
error code: ICF-LE-http-c:100-l:3-T:21-C:3-U:5-P:-L:7
HTTP 401 - Unauthorized
Please help.
Regards,
Venkat.Dear All,
As per your suggestion,I have used PIRWBUSER,
In Runtime Workbench -> configuration (with user PIRWBUSER) i see "A monitoring configuration for the selected XI domain does not yet exist" and a table with 2 component are checked.
When i try "Save Configuration", it writes " RFCDEST_NOT_CREATED".
and I try to use Runtime Workbench -> end-to-end monitoring.But i get "No process defined for this domain ", when "Display".
Please suggest me,how to procced.
Sridhar:user is aleady having the SAP_XI_MONITORING role.
Regards,
Venkat.
Maybe you are looking for
-
As well as this I no longer seem to have a digitally signed driver. I have no idea if this is linked to the problem as well. Can anyone help? thanks
-
SMTP Portlet - Address lookup not working
I've installed the upgraded SMTP portlet and configured the OID Configurations according to the directions. When I try to look up an address, the address window pops up, but there is nothing there. The '%'is in the search box. I click search, but no
-
Property performance issues cpu 40%
All We are using a tableView with maybe 10+ SimpleIntegerProperty or SimpleStringProperty fields on our object to update values on the table. When we push data into the table we are seeing the CPU at 40%. When profiling the application all of the iss
-
!!! How do i retrieve images that by accident got in the trash-bin
When I wanted to delete 1 picture from a slideshow, i wasn't aware that i selected 890! images. So when almost all my pics were gone i clicked 'undo' from the 'edit' menu. And then aperture crashed... After starting it up again all these images are i
-
Upgrading Iphoto 7.5.1 to 9.4.1
I want to upgrade from my original Iphoto (7.5.1) to 9.4.1. App store sells 9.4.1 which is fine, but when I click to buy it, it states that my current Iphoto 7.5.1 did not come from the app store, which I know-- It came with the Imac in early 2008.