End user ability to disable/enable video capabilities

Customer is using Cisco IP phones (79XX) and CUVA for video.
When they don't want to use video for a specific call, they just turn off video at the beginning of the call, but in this case they still get a black screen.
Is there any way to prevent this black screen from appearing when the call is just an audio call?
If the only way is disabling video capabilities in the device, is there any way in which the end user can do it without contacting administrator?
Thanks in advance.
Best regards,
Carmen

Defer FP updates.
See attached.
Ben
Note: Before LV 7.0 the deferment stop FP updates. In post LV 7.0, the defer force one update before the deferment becomes effective. See release notes.Message Edited by Ben on 06-23-2005 07:31 AM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
DeferFPUpdates.JPG ‏32 KB

Similar Messages

"Adobe Acrobat is blocked" - Where to I accept the end user agreement which will enable me to access Pdf documents on the web?

I keep getting this message when trying to open documents from the web:
"Adobe Acrobat is blocked" -
Where to I accept the end user agreement which will enable me to access Pdf documents on the web?
The Adobe website recommends this: (did not solve the problem)
Safari 7 and 6.1 block PDFs | Acrobat, Reader
Thanks for any help solving this annoying problem!
OSX 10.9.3
Safari 7.0.4
Acrobat Pro 11.0.0

Hello Isakten:
Thanks so much for your reply!
I already have Adobe Reader 11.0.7 and Adobe Acrobat Pro 9 installed.
Following your instructions, I then selected Reader as the desired Adobe product to open all PDFs. and save that choice. Still no difference, the same black screen and statement about the EULA shows up…
http://www.nhgastro.net/patients.html
BTW, this is the website that I was accessing……note the link to download and print the pdf which triggers the EULA page.
and also downloaded the latest version of Reader via their link….but to no success…..
This all started by itself months ago, I did no newer installs or settings changes, none……
Any other thoughts?
Thanks so much,
Steve

End user permission ignored

Hello,
I have a problem with an end user permission that seems to get ignored: I wanted to demonstrate the usage of the end user permission and assigned a role to a User (for simplicity's sake as an entry point, no worksets, pages etc. involved) and enabled end user permission on the role for that particular user.
Now when that user logs in he gets to see the according entry in the navigation bar as expected. However if I disable the end user permission, log out and again log in the user, he stills sees the link. The end user permission setting is simply ignored. Can someone shed light onto this, could there be something wrong with the installation)?
I don't think this is an issue of permission inheritance (the role permissions are set explicitly anyway) or overlapping permissions due to membership in several groups - the user is only member of the single standard group 'authenticated users'.
Regards,
Sebastian
P.S. What's the use of a role assignment to a user without end user permission anyway (I mean why the option)? What happens if you don't add permissions on a Role for a certain user at all (I tried it, but the effect is the same as described above - end user permission seem to be irrelevant)?

Hi Robert,
thanks for your answer and for the link (and I thought I had read everything). I am not so sure however if I really understand the term 'runtime environment' for a user. I thought runtime vs. design-time meant the difference between the content a user sees when he is actually using the portal and the content an administrator has access to in the portal content catalog, i.e. a meta-environment accessible only through certain tools like the permission editor or similar.
I don't understand what you want to express with "<i>It's used to restrict ... end user runtime environment</i>" and why the "Page Personalization" is an example.
I realize that for roles the availability for a user is solely defined by the assignment of that role to the user - end user permissions have no effect on this. Confusing, because I tought this availability (i.e. showing links in the toplevel or detailed navigation) was what was meant by 'runtime environment' but I seem to be wrong here.
The docu says "<i>for roles the end user permission setting does enable you to define which users/groups/roles are able to preview the role content using the portal design-time tools</i>". Again, I am confused, I thought this was exactly the meaning of design-time environment.
Great if you or someone else could comment on this..
Regards,
Sebastian

Accessing Work Items assigned to other users from end user page

Hello Experts,
We are using Sun IDM 6.0 SP1 at our client place. Most of the applications integrated with IDM are manually provisioned, in the sense, once after all the necessary approvals are received the request will be assigned to a group of provisioners, they will manually connect to the requested application and create the account in native system. There are more than 100 such provisioners in the organization.
Current design is to assign a work item to all the provisioners (like Multi approval) and once a provisioner assigns the request to himself then the corresponding work item will be taken out from other provisioners approval queue. These provisioners login to end user page of Sun IDM to access their approval queue as only the end user page is SSO enabled.
Because of the large number of requests in the system (more than 50k) and each request having 100 work items, the number of work items in the system is huge and thus the performance of the system is very poor so we are working to change the design to bring down the number of work items in the system.
Customer is not convinced to have a dedicated person who can get all these work items in his queue and assign it to the appropriate provisioner, they are looking to have a solution something similar to the current one in which all the provisioner can see all the requests in the system and they can pick from it and assign to them.
So we are thinking to create a generic id in the system and assign all the work items to that id, and make changes to the “end user work items list” file so that all the provisioner can see the work items that are assigned to them as well as that generic id.
But for some reason I’m not getting the work items assigned to other users in the end users page. I have tried assigning all the capabilities to logged in user and tried some code changes in “end user work item list” page.
Please share if you have any sample code which can list the work items assigned to other users in end user page. Also please let me know if there is any better alternate to this problem.

Hi,
There is a option to find and get other user's workitems. Please check the attestation and remediation tab. Use the form portion from attestation page and add it in the Work item list form. This will enable to the user to search for another user's workiteams and assign it to him/her manually. (The user needs to be assigned proper admin rights)
To get all the workitems, in the system, you will need to query the repository for all the workitems.... but not sure it will be a good idea in your case as the volume is very high.
Hope it helps
Regards
Arjun

How can i disable debug information from the end user

By changing debug flag in the url to YES it is possible to view debug information. i want to disable debug information, so that end user could not see debug information. can anyone please tell me the solution.

Sundhar,
when you export the application select Debugging:No
It's one of the available properties together with Build Status, Export Comments, Export Supporting Objects Definitions and so on.
Bye,
Flavio
http://www.oraclequirks.com

End user have ability to change font style in text field of interactive pdf form?

Does the end user of an interactive pdf form able to change the font style, i.e.: make something bold or underline a word in a text field?
I am making a form with text fields and the end user would like the ability to make something bold or underline it.. I do not see anywhere in acrobat that allows styles to be changed.
I have created the form in Indesign > saved it as an interactive pdf and brought it into Acrobat.

Thank you for the quick response! Do you set this in Indesign before exporting or do you set this in Acrobat? I am in Acrobat 10.1.10 and when I go to properties it doesn't give me 'options' to choose from.

Enabling end users to create and upload their own layouts for PDF reports

Using the PDF printing features in APEX 3.x and BI Publisher, you can create professional looking report designs with no programming knowledge, simply by using the built-in wizards of the BI Publisher Word Plug-In, and a little knowledge of how to use MS Word. The nice thing about using the Word Plug-In is that even the end users of your APEX applications could potentially do this. The only problem is, that typically those report layouts are stored under the Shared Components of your application, and end users generally don't have access to the Application Builder, all they typically use is your APEX application. So then why not simply add an interface to your APEX application that lets your end users upload their own layouts and dynamically link them to APEX report queries at runtime? I put together a sample application that demonstrates this technique, you can try it out on apex.oracle.com or download the application and try it on your own APEX instance. Here's the link to my Blog with more information:
http://marcsewtz.blogspot.com/2008/05/enabling-end-users-to-create-their-own.html
Regards,
Marc

Hi Marc,
Very nice app. I tried to create a new template with success.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

Enabling end - user access in Sun One Web Server 6.1 SP2

Hi,
I am new to Sun One Web Server 6.1 SP2 and I can't figure how to enable the end user access so that the end users can change their password.
On iPlanet 6.0 SP2, in the Distributed Admin page, I could enable Distrubuted Administration as well as end user access on the webserver. The end users could then change their own password. I can't find a similar feature in Sun One Web server 6.1 SP2.
Could anyone out there tell me how to get this done?
Thanks in advance!

Hi,
I just found from release notes that End user administration feature (which was under Distributed Administration ) is no longer supported in Sun One Web Server 6.1. [Problem ID 4865295 in release notes]
Could anyone provide a workaround to get over this and allow the end users to change their passwords?
Many thanks in advance,
auporna.

How to disable end user personalisation for all webdynpro application.

Dear Experts,
I have a requirement where I have to disable the end user personalization of each and every
webdynpro application in my server.
I know how to disable the personalization of a single application or a single component, but my requirement is to disable the personalization of all applications.
Request you to please suggest.
Warm Regards,
Upendra Agrawal

Hi,
As per SAP help,
Customizing: User-Independent, Client-Wide Modifications
While a single user u2013 during a personalization process u2013 can manipulate his or her own settings, an administrator has the option of executing Customizing settings for all users. Technically, this procedure is not different from personalization; both take place at runtime of an application. The difference lies in the range of the settings. In addition, for these global settings an application must run in a special administration session. This is always automatically the case if an application was started in the portal in the preview session. Independently of the portal, you can start an application in the following manner from within the workbench in administration mode:
Double-click the name of the application in the object list.
In the Web Dynpro Applications menu in the upper, left-hand corner of the Workbench window, choose Test Execute in Admin Mode .
The configuration mode is passed to an application as the sap-config-mode=X URL parameter.
Note
All the adjustments made by the administrator in admin mode are stored as client-specific. Presently no option is available for structuring smaller user groups on an administrative basis. Since cross-client adjustment applies to the respective configuration, the structuring of smaller groups can be implemented currently through the maintenance of different configurations.
End of the note.
You start personalization by calling up the context menu for the respective UI element in your application. In the corresponding context menu for an administrator (that is, with URL parameter sap-config-mode=X), in addition to the standard settings administrators have the option within a UI element container to sort either single lines (Grid, Matrix aund RowLayout) or single elements (FlowLayout).
Note
Administrators require special authorization for client-wide modifications. This can be a developer authorization or the special authorization S_WDR_P13N. You cannot create configurations at design time with this authorization, but you can make modifications at runtime.
End of the note.
These modifications are valid for all users but take place in the current client only.
Thanks,
Chandra

Enable the UAC settings for Domain Controller / Member servers and for end user systems

Hi
We are working on hardening the security for all Domain Controllers / Member Servers and end users systems. As part of it we would like to know the best practice for UAC settings for each of these servers. There are 8 settings related to UAC and as of now
we configured just "User Account Control: Behavior of the elevation prompt for standard users" as disabled for the servers OU. Also not sure about other settings and how it affect the normal operations like installing Windows updates / applications
through SCCM or manually on servers or end user systems and other stuffs.
We are looking for experts opinion on this. Thanks in advance
LMS

Hi LMS,
Would you please let us know the current situation? Just check if Martin’s suggestion was helpful for you.
If any updates, please feel free to let us know.
Just additional. Please refer to the
User Account Control Grouping in the following article. It will provide some links about those different UAC settings. Please click those links and read related articles. In these articles, will provide
Security considerations that may help you to configure those settings.
Security Options
http://technet.microsoft.com/en-us/library/jj852268.aspx
Hope this helps.
Best regards,
Justin Gu

Enable the visibility of parameter to particular end user

Hi all,
I have created one report, in that i am using parameter selection.
Now my requirement is parameter selection should not be enabled for me and other users, but it should be enabled for a particular end user.
Thanks,
Ranjith C.

PARAMETERS : p1 type char10, p2 type char5.
at SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    if screen-name CP '*P1*' and sy-uname = 'USER_NAME'. "required username
     screen-active = 1.
    elseif screen-name CP '*P1*' and sy-uname NE 'USER_NAME'.
     screen-active = 0. " this will make the entire field disapper .. screen-INPUT =0 only makes it not editable..
    endif.
    MODIFY SCREEN.
   endloop.
posting a better code...
Edited by: Soumyaprakash Mishra on Nov 10, 2009 4:56 PM

Enabling Usage Rights for End User with Reader

When I "Enable Usage Rights in Adobe Reader," utilizing Adobe
Acrobat Pro 9, which functions are restricted for the end user?
Specifically, if one cell property in Acrobat has a
"Calculate" function, will the calculation perform properly in
Adobe Reader 9 for the end user?

Thank you for your posting. These forums are specific to the
Acrobat.com website and it's set of hosted services, and do not
cover the Acrobat family of desktop products. Please visit the
following forums for any questions related to the Acrobat family of
desktop products:
http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
Note: Once Reader enabled certain functions like editing a
PDF,inserting or deleting the pages will be restricted at end user
part.Apart from this "Calculate" function will support both Acrobat
as well as Reader application.

How to enable end users to escalate requests outside of newScale - end user view of delivery plan

How do you communicate to end users in a large organization, the procedures for escalation a request that is late or urgent. The views of the delivery plan available to users don't give them muche detail about who is doing the work.
I'm curious how other people communicate the escalation procedures - per service - to the end users that submit them? for instance, our unix admin team is pretty swamped and not meeting their OLAs reliably. They want to provide a way for the Appdev/IT users to know how to escalate requests that are late and urgent/important.
When a user submits a unix admin service on a req, if the user knows where to look in myservices, they can see the delivery plan, but enough detail to know who is doing the work. (we submitted an enhancement request a while ago to provide an options for a "full disclosure" view of the delivery plan). Even if they have enough access to service manager to find the req number and see the service manager view of the delivery plan, they still only see the service team/queue name, which might not be enough info for them to make a call or send an email.
We are discussing a few options and was curious what others are doing:
1. Update the Service description to include a contact distribution list for the fulfillment team (for requests with simple plans) or the service owner team for complex delivery plans.
2. Create a custom email template to be sent at start of delivery plan. Ccurrently we have a generic email that covers most requests, but are thinking of creating emails that provides service-specific escalation information.
3. Create an intranet page with escalation information by service, and perhaps including this as a link off the myservice home page or the service description.
The scope of this question is more around infrastructure requests that are fulfilled by centralized groups, not how end users escalate phone or computer requests. Our service-desk generally not involved in support of infrastructure requests, although they woudl probably be the escalation point for end-user requests
-Brian
running 2009.sp2

create a CSI program (from ITIL) that will be empovered to fix the issues with Unix admins, ie hire more people.
Dont fix process issues with technology, fix the process itself

What Plug Ins enable you to interface with End Users through TFS?

Hello. Currently I am operating off two systems; Managed Service Desk (IT Help Desk tickets) and TFS for more of our development projects. In order for me to get rid of the first application I need to find a plug in that will interact with TFS and allow
me to make responses to my end audience without them needing a license for TFS. This solution (plug in) will allow my end users who are stakeholders to put in requests, bugs, user stories and allow me to respond to them through the plug in.
Any recommendations?
Thank you.

Hi Laura,
Thanks for your post.
What’s the version of your TFS?
In TFS 2013 Update 4, you can add the users to Stakeholder group using Change access levels feature in TFS Web Access, the stakeholders can view and edit work items, but they cannot request feedback. For more information, please refer to
this document:
https://msdn.microsoft.com/en-us/library/jj159364.aspx.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Disable Query Builder Tool access to end users

Hi,
Did any of you block the Query Builder Tool access to your end users?
In our Netweaver 2004s BI implementation, we have a special need to restric the access to Query Builder Tool. Mostly our users are using BEx Analyzer tool (Front end service pack- SP12). Any ideas in this regards would be highly appreciated? Of course I can restrict access on the back end that our end user is only able to read the Query. What I am looking what is, how to stop the user even from launching Query Builder tool?
Thanks
Jay Lakshmanan

Hi Altera,
If the role doesnt give access to transaction RRMX and if none of the Reporting Auth Objects (S_RS_COMP, S_RS_COMP1, S_RS_FOLD) exists, than the user will not have access to Query Builder.
Hope it helps.
Please award points if it is useful.
Thanks & Regards,
Santosh

End user ability to disable/enable video capabilities

Similar Messages

Maybe you are looking for