End user releasing own emails based on Policy/Content

Hiya all,
New to this forum and my first post so hello to all
We recently installed a couple of C360 and an M series and they all are working well.
We have also setup Profanity based filtering and as a result many swear words are being rejected.
This is setup using dictionaries.
But we are also getting a high number of false positives and as a result our Techsupport team is inundated with requests to release emails.
I know with SPAM Quarantine there is End-User Quarantine Access but I don’t see this with Policy Quarantine.
The end result I want is for end users to release their own emails blocked based on profanity.
Is this possible?
My apologies if this has been asked in the past.
Ivan.
:D :D

Welcome aboard Ivan!
The main reason there is a separation between ironport spam quarantine(isq) and policy quarantine(aka system quarantine) is that ISQ is mainly used in conjunction with the anti-spam verdict/results. While policy quarantine is used as a result of administrative/company policy(e.g. like a profanity dictionary filter in your case).
Another difference between the two is ISQ is accessible by the end user. Policy quarantine is accessibly only by the admin of the machine.
Here is a KB article that goes over their diffs.
What is the difference between IronPort Spam Quarantine and System Quarantine?
http://tinyurl.com/233qkq
Now, there is a way to tweak it so that the content filter sends it over to the ISQ. Now keep in mind by doing this, you're mixing profanity filter verdicts with anti-spam results. It may be confusing for the end user unless you preprend the profanity stuff with "[Contains profanity]" at the beginning of the subject line.
This Cisco IronPort support portal KB article goes over how to send content filter results over to the ISQ.
Can a Content Filter divert messages to the IronPort Spam Quarantine?
http://tinyurl.com/coebj3
Good luck and let me know if that doesn't address your concern.

Similar Messages

How to send HTML email to End User using OOTB email processs?

Hi,
We are using OOTB Send email process to send email to end user.
Templates has been created inside /etc/workflow/ProjectName/email folder.
Its working properly for plain text email.but for html template ,It send the email with html tags.
Any pointer on how to write html template for OOTB email process and activate email type as html ?
Thanks
Deepika

Thanks Sham..
I am able to send HTML email following above link.
The problem i am facing is,When i am deploying the code through crxde.Code is working fine.
But using maven deploy..Bundle get activated ..But at line:
messageGateway = this.messageGatewayService.getGateway(HtmlEmail.class);
,it gives null Pointer exception.
Any pointer,why its not working from maven deployment.
Regards
Deepika

Auto sort incoming email based on message content and subject

I am trying to do what it says above. I have created a smart mailbox and that will put on copy of the message in the mailbox and one in my inbox. How can I do it so it will be automatically added to that mailbox instead of my inbox?
Thanks,
Daniel

don't use a smart mailbox for this. a smart mailbox is not a real mailbox. it's a saved search and doesn't move messages anywhere. make a regular mailbox and make a mail rule that moves incoming messages to that mailbox based on criteria you want.

WAREHOUSE MANAGEMENT END USER MANUAL

hII,
If any body is having Wareehouse end user manual , Please email to me.
I want to refer for End user training.
Email ID: [email protected]
Regards,
Aysuhika Jain

Hi Nitin
Please find a list of important wm transaction codes
LB01
Create Transfer Requirement
LB02
Change transfer requirement
LB03
Display Transfer Requirement
LB10
TRs for Storage Type
LB11
TRs for Material
LB12
TRs and Posting Change for MLEat.Doc.
LB13
TRs for Requirement
LD10
Clear decentralized inventory diff.
LD11
Clear differences for decentral.sys.
LI01
Create System Inventory Record
LI02
Change System Inventory Record
LI03
Display System Inventory Record
LI04
Print System Inventory Record
LI05
Inventory History for Storage Bin
LI06
Block stor.types for annual invent.
LI11
Enter Inventory Count
LI12
Change inventory count
LI13
Display Inventory Count
LI14
Start Inventory Recount
LI20
Clear Inventory Differences WM ?
LI21
Clear Inventory Differences in MM-IM
LL01
Warehouse Activity Monitor
LLVS
WM Menu
LN01
Number Ranges for Transfer Requirem.
LN02
Number Ranges for Transfer Orders
LN03
Number Ranges for Quants
LN04
Number Ranges for Posting Changes
LN05
Number Ranges for Inventory
LN06
Number Ranges for Reference Number
LN08
Number Range Maintenance:
LP10
Direct picking for PO
LP11
WM staging of crate parts WM
LP12
Staging release order parts (WM-PP)
LP21
WM replenishment for fixed bins WM
LP22
Replenishm. Planning for Fixed Bins
LQ01
Transfer Posting in Invent. Mgmt
LQ02
Transfer Posting in Invent. Mgmt
LS01
Create Warehouse Master Record
Regards
Vikrant

Problem with some user accounts receiving email

We are running Exchange 2003 and having our end users get their email via Outlook Web Access on their Blackberry devices, and are having a problem with just some users. When we go into BIS, we can setup their account just fine, but they never receive any e-mails. They can send e-mails fine also. We have done the following tests:
1. I have setup my AT&T Curve to check my e-mail, works fine.
2. I have three users I'm currently using as my "test group" since this problem began. Two using Verizon Storms, and one using a Verizon Bold. All three can send e-mail fine, one of the storm users can check e-mail, but not the other two.
3. I have setup these accounts on my (known working from test 1) Blackberry Curve, and get the same results. I cannot receive e-mail on either of those two accounts.
I don't see any errors in any logs (unless I am looking in the wrong place). I've even gone throught adsiedit and compared the msexch* settings and they all seem comperable. Any ideas as to what could be causing this?

On the devices browser options, are these settings all identical?
support HTML tables : Yes/Ns
style sheets media type : handheld/Screen
emulation mode : Blackberry/ Openwave (WAP/Openwave gateway/MSIE/MS PocketIE/Netscape)Content mode : WML & HTML / HTML only / WML only
If someone helped you give them kudos. Research all info!

Is there a way to prevent an end-user from changing their own password?

All you guru's out there, I need your help. Is there a way to prevent an end-user from changing their own password? Is there a function or procedure I can create or what?

In this case, you do not want someone (whoever they are DBA etc) to connect as that
particuler user to change the password.Yes, but I wouldn't expect the users to[i] know that password. The connnect would be handled automatically, behind the scenes.
The clear implication of the OP's question and response was that users would not be allowed to change their own passwords. I'm guessing this is in response to a policy that says users mustn't have simple passwords like 123abc or mom. In such a scenario a better approach would be to apply regexp to a user's password to ensure it contains a mix of letters, numbers, punctuation, etc to achieve the desired level of complexity.
So questions, should not be regarded as daft Agreed, but the same is unfortunately not always true of business decisions. As the OP has told us not to ask we cannot know why they want to do this. Personally, I think a user's individual password should always be their responsibility; anything else strikes me as insecure. YMMV.
Cheers, APC

Email notification to end-user only when both resources are provisioned

Hello Gurus,
My client has a requirement where the end-user needs to be sent an email notification as soon as his account gets created in OID and EBS.
So the next time when the user logs in; he should be able to access both his accounts. But the email should be sent only when the 2 accounts are succesfully created.
How can we do that by means of process tasks and adapters?
Can anybody give an idea about how can we provide this functionality in the best way OOTB or custom way (code snippet) ?
Thanks,
- JHB.

Hi
If you are using OOTB connectors for OID and EBS then this requirement can be achieved by using OIM API.
On successful response of 'Create user' in OID or EBS call a custom adapter and check for the provisioned status of other RO i.e. on completion of Create User task of OID, check for prov status of EBS and send the mail accordingly.
If the user is not provisioned to the other resource, then do not send the mail. Otherwise if the user is already provisioned to the other resource, send the mail to the user. This approach is based on the assumption that there is no link between the provisioning to OID and provisioning to EBS.
Correct me if I missed something.
Hope this helps.

Looking for browser-based, end user ad-hoc reports

Hi all. We have need for an easy to use, browser based end-user reporting tool that can be hosted by CF10. We are spending a fantastic amount of time building custom tabular reports for our client and would prefer to give them a tool in our app that let's them build reports whenever they want. Do any of you know of any good reporting tools where the end-user could build their own reports?
Thanks for your help.
-Andy

Hi Andy,
You could try JReport. Its a reporting and data visualization tool that let's anyone of any skill level create and modify their own reports and dashboards. You can even embed them into other applications. Let me know if you want to chat about it.
JReport website: www.jinfonet.com
-Dean
dyao (at) jinfonet.com

Allow users to create reports based on their own selection of fields

Is there a way to allow users to create reports based on their own selection of fields?
And if there is a way, then how?
In access we retrieve all demographic info on one screen and on another screen user can be able to choose specific fields from a list box to import data into file.

Hi,
This can be handled in various ways - but the principles are the same.
You need to apply conditional displays to all of the columns that your user can select and base the display of a column on the value of a field on the page.
You can have a series of Yes/No options - one for each field and base the display on the corresponding field being Yes. Or you can use checkboxes.
However, if you wish to use a multiselect list (which is probably easier as you can dynamically generate the list of field names), you will need to have hidden fields that will store either Y/N or 1/0 (I use ones/zeros) and have the conditional displays watch these fields instead. Populating these hidden fields is a bit more tricky than just having fields on the page that the user can control, but is doable:
1 - Create one hidden field for each field in the report that you want to show/hide. Put these fields in the same region as the select list in a region above the report
2 - Set conditional display values to "Value of Item in Expression 1 = Expression 2" and use the appropriate hidden field for Expression 1 and in Expression 2 enter in 1
3 - Create a page process that runs on submit, and create PL/SQL code something like:
DECLARE
lFields HTMLDB_APPLICATION_GLOBAL.VC_ARR2;
vField VARCHAR2(1000);
BEGIN
:P31_SHOW_EMPNO := 0;
:P31_SHOW_ENAME := 0;
:P31_SHOW_JOB := 0;
:P31_SHOW_MGR := 0;
:P31_SHOW_HIREDATE := 0;
:P31_SHOW_SAL := 0;
:P31_SHOW_COMM := 0;
:P31_SHOW_DEPTNO := 0;
lFields := HTMLDB_UTIL.STRING_TO_TABLE(:P31_FIELDS);
FOR i IN lFields.FIRST..lFields.LAST LOOP
vField := lFields(i);
IF vField = 'EMPNO' THEN
:P31_SHOW_EMPNO := 1;
ELSIF vField = 'ENAME' THEN
:P31_SHOW_ENAME := 1;
ELSIF vField = 'JOB' THEN
:P31_SHOW_JOB := 1;
ELSIF vField = 'MGR' THEN
:P31_SHOW_MGR := 1;
ELSIF vField = 'HIREDATE' THEN
:P31_SHOW_HIREDATE := 1;
ELSIF vField = 'SAL' THEN
:P31_SHOW_SAL := 1;
ELSIF vField = 'COMM' THEN
:P31_SHOW_COMM := 1;
ELSIF vField = 'DEPTNO' THEN
:P31_SHOW_DEPTNO := 1;
END IF;
END LOOP;
END;
4 - Finally, add a button that generates the report - this just needs to submit the page and branch back to the same page
I've used the standard EMP table for this example and my hidden fields are P31_SHOW_fieldname. The code resets the hidden fields to 0, checks if the user has selected the field from the list (P31_FIELDS) and changes the hidden fields value to 1 for all those selected. When the page is re-rendered, the report hides the columns where the hidden field value is 0 and displays those where it is 1. The export option will then only export those fields that are displayed.
You can see an example of this here:
http://htmldb.oracle.com/pls/otn/f?p=33642:31
Regards
Andy

Hosting In-Context on my own server. Better for end-user?

Instead of purchasing a subscription, will I be able purchase and host the software on my own server. Wouldn't that be more econonical and beneficial for the end-user?

Hello kenfordesign,
At this time there aren't any plans to release InContext Editing as a stand-alone software package. It is only available as an online hosted service.
Please consider Contribute: http://www.adobe.com/products/contribute/faq/
or Contribute Publishing Server: http://www.adobe.com/products/contribute/server/faq/
Best regards,
Corey

HT201272 can someone help me with this chat session.Font Size You are chatting with an Advisor now. This chat will be recorded. At the end of the session, you can print the transcript or request a copy via email. Privacy Policy Advisor [4:49 p.m.]: Hi, my

Font Size
You are chatting with an Advisor now. This chat will be recorded. At the end of the session, you can print the transcript or request a copy via email.
Privacy Policy
Advisor [4:49 p.m.]:
Hi, my name is Jacob. It'll be just a moment while I review the comments you provided.
Advisor [4:49 p.m.]:
Hello Machelle, how may I assist you today?
Customer [4:51 p.m.]:
Can you please help me recover the new testament of the bible from media group. The have vanished.
Customer [4:52 p.m.]:
I need to recover the lost purchases I made from media group. I had all of the new testament.
Advisor [4:53 p.m.]:
Thank you for this information, I understand that you are missing some purchases. I do want to apologize for this inconvenience. I will be more then happy to look into this for you.
Advisor [4:53 p.m.]:
Would you be able to provide your Apple ID? This is the email used to sign into the iTunes store.
Customer [4:54 p.m.]:
[email protected]
Advisor [4:54 p.m.]:
Thank you, one moment please.
Advisor [4:56 p.m.]:
Were these individual purchases? If so could you provide the name for each individual purchase?
Customer [4:57 p.m.]:
yes it the new testament books of the bible
Customer [4:57 p.m.]:
genesis etc...
Advisor [4:58 p.m.]:
I apologize, but I am not exactly familiar with the New Testament. Would you be able to provide these names for me so I can locate them on my end?
Customer [4:59 p.m.]:
Genisis Mark Matthew Luke John
Customer [4:59 p.m.]:
Exodus Levitus Numbers
Advisor [5:00 p.m.]:
Just a quick question, were these all audiobooks?
Customer [5:00 p.m.]:
Duetoronomy
Customer [5:00 p.m.]:
Yes from media group
Advisor [5:00 p.m.]:
Okay, are you currently on a computer with iTunes installed?
Customer [5:01 p.m.]:
yes
Advisor [5:02 p.m.]:
Unfortunately, audiobooks and ringtones are the only items on the iTunes store unavailable for re-download through iTunes in the Cloud. What I can go ahead and do is try and re-add these audiobooks back to your download queue for re-download. Please note if they have been removed or modified on the iTunes store they may not be available for re-download. Would this be okay?
Customer [5:03 p.m.]:
yes thank you!
Advisor [5:03 p.m.]:
Excellent, one moment please.
Advisor [5:05 p.m.]:
I apologize but after reviewing your account, it looks like we have already issued 3 exceptions for you to re-download your audiobooks in the past. Back on 02/23/2013. I apologize but we will be unable to do another exception for you.
Customer [5:06 p.m.]:
that down load did include the new books of the bible that I had.
Customer [5:07 p.m.]:
that down load did not have the new testament books of the bible that I had
Advisor [5:07 p.m.]:
While reviewing the notes, this was issued to add all available audiobooks bought on your account. I again apologize but I will be unable to issue another exception to you. As the previous advisor did inform you to make sure to back up your files.
Customer [5:08 p.m.]:
the other advisor did not down load the new testament books. The advisor did not restore all of the books that I had originally brought.
Advisor [5:10 p.m.]:
While looking closer, the books that you are missing are no longer available to be re-downloaded. This is the reason why they were not added back to your download queue when he issued them. Unfortunately, as we do not handle the content on the iTunes store you will need to get in contact with the publisher of the content as they were the ones two remove or modify these books on the iTunes store. If you would like I can provide a link to their support site.
Customer [5:11 p.m.]:
yes they are I saw them.
Advisor [5:11 p.m.]:
They may have been modified by the content owner. This will be the reason why they were not added. As Apple does not control 3rd party content on the iTunes store. You will need to get in contact with them as we are unable to re-add this content back to your download queue.
Customer [5:12 p.m.]:
it is I just looked at it in the itunes store
Customer [5:13 p.m.]:
the material is still the same. The store does have it.
Advisor [5:13 p.m.]:
Machelle, if the items have been modified since you bought them, they will be unavailable for us to issue them back to you. You will need to get in contact with the providers for these books as they are the content owners and we do not have access to issue these back to you.
Customer [5:14 p.m.]:
the are still the same bible books that I purchased at the store.
Customer [5:14 p.m.]:
The audio books are the same. When I buy it again nothing will be different.
Advisor [5:14 p.m.]:
Machelle, I understand this. This is what our records are showing. When the previous advisor tried to re-issue them to you they were unable to as they have been modified on the iTunes store.
Advisor [5:15 p.m.]:
In order to receive further support for this issue you will need to get in contact with Media Group as they are the content providers for these audiobooks.
Customer [5:15 p.m.]:
I will buy them from another source. Don't say they have changed. The books are the same books I brought. They are at the store.
Advisor [5:16 p.m.]:
Machelle, Apple does not handle the content for 3rd party publishers on the iTune

MoonSwan wrote:I've never heard of a validating editor but I was recently wondering what exists that could help me. Aside from emacs, what should I search for to find one of these validating editors?
You can use whatever tool you prefer - for someone already using emacs, emacs is a natural choice. Simple, easy to use online tools exist e.g. http://schneegans.de/sv/
Just upload the file in question ('Validate by file upload' option) and click 'Validate':
The '=' character cannot be included in a name. (723:10)
<Terminal="Terminal">
^
Googling 'xml validation' should give you some more tools / services if this one is not good enough.

I have multiple users & devices on my apple account. How do i set up icloud so we can have our own emails?

I have multiple devices$ users on my apple account. How do I set up icloud so that we can have our own emails?

iCloud isn't designed for multiple users. Everyone involved should have their own separate iCloud account, which means they need a separate Apple ID to create it: and each should be using a separate user account on the Mac to sign into their iCloud account.

Auto-populate form fields based on end user input?

I'm currently attempting to create a new form that has a combo box "Locations" with various options. What I'm looking to do is have another text field auto populate other fields related to that location (such as address, contact information) to save on time and reduce opportunity for end user errors in input.
What are my options for accomplishing such a task? Some form of binding fields with a MS database possibly?
Thanks in advance for any advice and assistance on this matter!

Paul,
The form and (potential) database would be located on a shared drive on the company network in which those that would use the form already have access to.
The pc's that user's would be using have Reader 9.
The pc I'm using for developing this form has LC Designer 8, Acrobat Professional 8, and Reader 9.
Ideally, I would "like" for the end user to have the ability to add new locations, addresses, etc ... in the event it is needed, although this would not be likely to come up.
Based on the software I have on hand, and the need to not incur additional expenses, what would you suggest?
Thanks again Paul!

In search of end user based forums

in search of end user based forums
Any one know of SAP website for (expert) end user Q/A ?
Development is fun and all, but when I need A break from the 011001101000100110100 where do I go?

Interesting question.
You could try the forum or even [Scripting Languages|/community [original link is broken]; here on SDN to get closer to the front end, but I guess the "expert level" would need to be quite advanced before an end user spends more than just a careless mouse-click there.
Otherwise there is the [SAP Design Guild|http://www.sapdesignguild.org] which has a lot of interesting things about the UI. However they closed their forums because of spam, and now point to . Downside: Not much action going on. Upside: You could become top contributor and will a free entry to SDN Community Day with just one post.
Another option worth taking a look through is the [BPX category|/community [original link is broken]; where you might find some .ppt programmers hanging out.
Cheers,
Julius

Enabling end users to create and upload their own layouts for PDF reports

Using the PDF printing features in APEX 3.x and BI Publisher, you can create professional looking report designs with no programming knowledge, simply by using the built-in wizards of the BI Publisher Word Plug-In, and a little knowledge of how to use MS Word. The nice thing about using the Word Plug-In is that even the end users of your APEX applications could potentially do this. The only problem is, that typically those report layouts are stored under the Shared Components of your application, and end users generally don't have access to the Application Builder, all they typically use is your APEX application. So then why not simply add an interface to your APEX application that lets your end users upload their own layouts and dynamically link them to APEX report queries at runtime? I put together a sample application that demonstrates this technique, you can try it out on apex.oracle.com or download the application and try it on your own APEX instance. Here's the link to my Blog with more information:
http://marcsewtz.blogspot.com/2008/05/enabling-end-users-to-create-their-own.html
Regards,
Marc

Hi Marc,
Very nice app. I tried to create a new template with success.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

End user releasing own emails based on Policy/Content

Similar Messages

Maybe you are looking for