Engent, Who could help about selection-screen.

Below is the code!
CALL FUNCTION 'DATE_CREATE'
    EXPORTING
      anzahl_tage = 7
      datum_ein   = sy-datum     "
    IMPORTING
      datum_aus   = gdf_wadat.   "
SELECT-OPTIONS: p_wadat FOR likp-wadat
DEFAULT sy-datum to gdf_wadat.
All I want to do is to set the low as currenct system date
then the high as seven days later.
But, by using the code above I could not do that!
God help me! Thank you very much!

Hello Minghan,
I see that you have registered just a few hours back. Welcome to SDN.
Coming to your requirement, you do not need a Function Module call at all. Try this out.
tables likp.
select-options: p_wadat for likp-wadat.
initialization.
p_wadat-low = sy-datum.
p_wadat-high = sy-datum + 7.
append p_wadat.
Hope this helps,
Regards,
Anand Mandalika.
P.S. : Since you are a new member here, I should like to introduce you to the Forum Etiquette. Answering the queries you make in SDN requires some time and effort from the person(s) who take up your question. So when you get an answer that you find to be useful, please do reward it accordingly by clicking on the Yellow star icon in the reply. It is an SDN way of saying Thank You! For more information, you can refer to the weblog https://weblogs.sdn.sap.com/pub/wlg/680. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]

Similar Messages

I used to update my iPhone 4S applications whenever a new update is available, but at this time, "unknown error" displays after entering my apple id password. Anyone who could help, whom they might have experienced? Thanks

I used to update my iPhone 4S applications whenever a new update is available, but at this time, "unknown error" displays after entering my apple id password. Anyone who could help, whom they might have experienced? Thanks

Hi Christianjr,
When you say you reset your network settings, what do you mean, exactly?
I saw another post on this issue, and the poster indicated that they resolved the problem by turning off their cellular date option and wifi options in Settings, and then turned them back on.
Also, resetting your phone may help - press the Home and Power buttons at the same time and continue to hold both down until the Silver Apple appears. Once it is back up, click on the update option and see if it fixes the problem.
If none of those things work, then need to have details on what you did to reset your network settings....
Cheers,
GB

Restricting values F4 help in selection screen-Urgent

Hi,
can anyone pls tell how can I ristrict the values for search help in any field in selection screen.
please tell me the way to hide some values in F4 help in selection screen so that user can not see those data for selection.
Regards

i think u can not hide the data.........
create own f4 help............restrict the data and then pass it the f4 internal table....
fro exp;;;;;
types : begin of ty_tab,
 post_code1 like adrc-post_code1,
 end of ty_tab.
data : it_tab type ty_tab occurs 0.
data : lt_field type table of dfies,
 lw_field type dfies.
select post_code1 from adrc into corresponding fields of table it_tab.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
 exporting
 retfield = 'POST_CODE1'
 dynpprog = sy-repid
 dynpnr = sy-dynnr
 dynprofield = 'LI_LIST1'
 value_org = 'S'
 tables
 value_tab = it_tab
 field_tab = lt_field
 exceptions
 parameter_error = 1
 no_values_found = 2
 others = 3.
if sy-subrc <> 0.
 message id sy-msgid type sy-msgty number sy-msgno
 with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
Regards
Anbu

Hi its urgent...help on selection screen parameters

Hi all,
I need help on selection screen parameters.
requirement is that,
i am having input fields for material, plant ,start date and end date and a check box and an input field for getting the txt file.
when i select the checkbox, it should ignore the mandatory fileds in the selection screen.
and when i get the file input, it should take the input data material, plant, start date and end date from the flat file and populate the corresponding input fields in selection screen.
How to do this..
thanks in advance.

Hi ..
While declare the Matnr, Plant etc dont use the OBLIGATORY addition.
instead of the based on the value of check box validate them .
AT SELECTION-SCREEN.
IF c_box = ' '.
<< validate for mandatory fields>>
endif.
REWARD IF HELPFUL.

Search help in selection screens for interactive report

A search help can only be assigned to DB table.
So my doubt is can it also be used for seletion screens created for an interactive report?
If yes what is the procedure.. Please give me one example at least...
waiting for your valuable suggestions.....
Thanks,
regards,
Chinmay

Hi Chinmay,
I suppose your requirement is to give search help to selection screen elements.
Here is the code.
REPORT ZSHAIL_F4HELP .
parameters: name(10) type c .
TYPES: BEGIN OF VALUES,
 CARRID TYPE SPFLI-CARRID,
 CONNID TYPE SPFLI-CONNID,
 END OF VALUES.
dATA: PROGNAME LIKE SY-REPID,
 DYNNUM LIKE SY-DYNNR,
 DYNPRO_VALUES TYPE TABLE OF DYNPREAD,
 FIELD_VALUE LIKE LINE OF DYNPRO_VALUES,
 VALUES_TAB TYPE TABLE OF VALUES.
at selection-screen on value-request for name.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
 tabname = 'DEMOF4HELP'
 fieldname = 'CARRIER1'
SEARCHHELP = ' '
SHLPPARAM = ' '
 DYNPPROG = PROGNAME
 DYNPNR = DYNNUM
 DYNPROFIELD = 'CARRIER'
STEPL = 0
VALUE = ' '
MULTIPLE_CHOICE = ' '
DISPLAY = ' '
SUPPRESS_RECORDLIST = ' '
CALLBACK_PROGRAM = ' '
CALLBACK_FORM = ' '
SELECTION_SCREEN = ' '
IMPORTING
USER_RESET =
TABLES
RETURN_TAB =
EXCEPTIONS
 FIELD_NOT_FOUND = 1
 NO_HELP_FOR_FIELD = 2
 INCONSISTENT_HELP = 3
 NO_VALUES_FOUND = 4
 OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
AT SELECTION-SCREEN OUTPUT.
PROGNAME = SY-REPID.
DYNNUM = SY-DYNNR.
CLEAR: FIELD_VALUE, DYNPRO_VALUES.
FIELD_VALUE-FIELDNAME = 'CARRIER'.
APPEND FIELD_VALUE TO DYNPRO_VALUES.
I hope your query is solved.
If so,please award points.
Regards,
Sylendra.

HT1386 WHILE SYNCHING iPHONE 3 WITH iTUNES. MY 1700 CONTACTS VANISHED FROM iPHONE AND iTUNES. I AM RUNNING AROUND TO GET IT RESTORED. ANYONE THERE WHO COULD HELP. HOW CAN I RESTORE AND GET MY CONTACTS BACK.

WHILE SYNCHING iPHONE 3 WITH iTUNES.
MY 1700 CONTACTS VANISHED FROM iPHONE AND iTUNES.
I AM RUNNING AROUND TO GET IT RESTORED. ANYONE THERE WHO COULD HELP.
HOW CAN I RESTORE AND GET MY CONTACTS BACK.

Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
pinto123 wrote:
i did every thing you said and when i went to restore this is what happened: the ipod software update server can not be contacted. make sure your network settings are correct and your network connection is active, or try again later. what do i do to restore. i used the last way to do it the dfu

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

I have internet optic fiber connection and I'm trying to configure it with my Airport Express but doesn't works, appears that I have IP and DNS, as I'm a computers dummy , who could help me to configuration it, please?

You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception.

Hi Experts, a question about search help in selection screen?

Hi Experts,
I have a selection screen and two parameters, one is plant and another is material, what I want is as following:
the user select a plant and when he select the material the material should be in the plant he has filled in, how can I handle this? detail help, thank you in advance.
Kind regards
Dawson

Hi,
Check the below code.
tables: t001k.
For Identification Number
DATA: BEGIN OF it_bwkey OCCURS 0,
 bwkey LIKE t001k-bwkey,
 END OF it_bwkey.
data: v_bukrs(4).
For Run date
DATA: BEGIN OF it_bukrs OCCURS 0,
 bukrs LIKE t001k-bukrs,
 END OF it_bukrs.
DATA it_ret LIKE ddshretval OCCURS 0 WITH HEADER LINE.
SELECTION-SCREEN: BEGIN OF BLOCK main WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS: p_bukrs(4) TYPE c.
SELECT-OPTIONS s_bwkey FOR t001k-bwkey NO INTERVALS.
SELECTION-SCREEN END OF BLOCK main.
INITIALIZATION.
SELECT DISTINCT bukrs FROM t001k INTO TABLE it_bukrs.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_bukrs.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING retfield = 'BUKRS'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'P_BUKRS'
value_org = 'S'
TABLES value_tab = it_bukrs
EXCEPTIONS parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR s_bwkey-low.
TABLES: t130r.
DATA: BEGIN OF dynpfields OCCURS 0.
INCLUDE STRUCTURE dynpread.
DATA: END OF dynpfields.
DATA : sy_repid LIKE sy-repid,
 sy_dynnr LIKE sy-dynnr.
CLEAR dynpfields.
REFRESH dynpfields.
dynpfields-fieldname = 'P_BUKRS'.
APPEND dynpfields.
sy_repid = sy-repid.
sy_dynnr = sy-dynnr.
CALL FUNCTION 'DYNP_VALUES_READ'
EXPORTING
dyname = sy_repid
dynumb = sy_dynnr
TABLES
dynpfields = dynpfields
EXCEPTIONS
OTHERS = 01.
IF sy-subrc = 0.
READ TABLE dynpfields WITH KEY fieldname = 'P_BUKRS'.
IF sy-subrc = 0.
v_bukrs = dynpfields-fieldvalue.
ENDIF.
ENDIF.
SELECT bwkey FROM t001k INTO TABLE it_bwkey WHERE bukrs = v_bukrs.
DELETE ADJACENT DUPLICATES FROM it_bwkey.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
retfield = 'BWKEY'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'S_BWKEY'
value_org = 'S'
TABLES
value_tab = it_bwkey
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
*MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Regards,
Kumar Bandanadham

ABAP Help: Dynamic Selection Screen

Hi,
I have a requirement to be able to pick the list of fields in a selection screen. (List processing)
Similar to SE16 choosing "fields for selection".
I've debugged SE16 and realized it deletes the report and regenerates a new report with the updated selection screen.
I could not do the same as it will also delete all the variants users have created in the report.
Has anyone done something similar before?
What is the best approach for this scenario?
Regards,
Michael Pang

Hi Michael
Hoping you have solved your problems with ALVs, I think it may be helpful to inspect FMs "FREE_SELECTIONS_INIT" and "FREE_SELECTIONS_DIALOG" for this issue. They have some Function Module Documentation.
If you are dealing with logical databases, then only in the INCLUDE program DBldbSEL of logical database ldb, you can use some selection-screen definition variants as:
1.SELECTION-SCREEN BEGIN OF VERSION vers TEXT-xxx.
2.SELECTION-SCREEN END OF VERSION vers.
3.SELECTION-SCREEN EXCLUDE ... .
4.SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE dbtab.
5.SELECTION-SCREEN FIELD SELECTION FOR TABLE dbtab.
6.SELECTION-SCREEN DYNAMIC SELECTIONS FOR NODE node.
7.SELECTION-SCREEN FIELD SELECTION FOR NODE node.
You can get more info from SAPHelp for these...
*--Serdar

Search help for selection screen

Hi experts,
I have a selection screen - and the user want that the asearch help will be :
For example: Equi-eqtyp with search help: eqtyp_sh_wd or
equi-matnr with search help mat1.
how can i do this?
thanks,
Michal.

Hi, Michal
Are you talking about some thing like bellow ?
PARAMETERS: eqtyp TYPE equi-eqtyp MATCHCODE OBJECT eqtyp_sh_wd,
matnr TYPE equi-matnr MATCHCODE OBJECT mat1.
Please Reply if else.
Faisal

One question about Selection screen

Hi experts,
I am writing a report, on the selection screen, I need to input the file path and then do the file upload.
My question is about how to check the file path I put is correct or not? If it is incorrect, I want to get a message and the cursor still in the field and don't jump to the next page.
How can I do like that?
Any one has any suggestion, please help me.
Thanks in advance.
Regards,
Chris Gu

Hi Chris,
    do it this way: check my code after calling gui_upload what condition i am using.
parameters:
p_file type rlgrap-filename.          " File name
*           AT SELECTION-SCREEN ON VALUE-REQUEST EVENT
at selection-screen on value-request for p_file.
perform get_file_name.
*                       AT SELECTION-SCREEN EVENT
at selection-screen on p_file.
perform validate_upload_file.
* Form GET_FILE_NAME
form get_file_name.
call function 'F4_FILENAME'
   exporting
     program_name        = syst-cprog
     dynpro_number       = syst-dynnr
     field_name          = ' '
   importing
     file_name           = p_file.
endform.                               " GET_FILE_NAME
* Form VALIDATE_UPLOAD_FILE
form validate_upload_file.
data:
    lw_file type string.              " File Path
lw_file = p_file.
call function 'GUI_UPLOAD'
    exporting
      filename                    = lw_file
      filetype                    = 'ASC'
      has_field_separator         = 'X'
      dat_mode                    = 'X'
    tables
      data_tab                    = t_final_data.
IF sy-subrc ne 0 and t_final_data is initial. " here message if file path is wrong
    Message 'File not found' type 'E'.
ELSEIF sy-subrc eq 0 and t_final_data is initial.
    Message 'File empty' type 'E'.
ENDIF.
endform.                               " VALIDATE_UPLOAD_FILE
With luck,
Pritam.
Edited by: Pritam Ghosh on May 8, 2009 8:57 AM

Regarding Search help on selection-screen field

Hi there,
I am working on custom tables.
I have a requirement to maintain search pattern on a selection-screen field.
selection-screen parameter: p_name which is company name filed from Z table.
By giving a string like Holl* and by pressing F4 on the field p_name it has to popup a dialogbox having list of company names starting with Holl.
Thanks in advance.
-Tulasi

Hi
Go through the link given below :
How to create a search help for my own fields in selection screen
F4 search help on report selection screen
also try :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'VKORG'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_VKORG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
TABLES
VALUE_TAB = T_TABLE1
FIELD_TAB = field_tab
RETURN_TAB = RET_TAB
DYNPFLD_MAPPING = DYN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
With Regards
Nikunj shah

Def a value in sear help of select screen generated by HR report category

Hi all,
Ive developed a HR report in which Ive used LDB PNP.. Now they are going to use this report for a particular company.
so in the report selection screen when they choose f4 help of personnel area i.e. field PNPWERKS, I need to default a value X for company code input field(BUKRS). so that the user can select personnel area pertaining to this company (code - X).
How can I achieve this? (defaulting a selection value in standard search help)
Thanks,
Rajan U

Hi Rajan
You can still do this in the initialization.
The memory id for the company code is 'BUK' and for plant it is 'PBR'. So in the Initialization event you can do like below. Here I am defaulting both the company code and plant.
insert personnel area code from user own data
GET PARAMETER ID 'PBR' FIELD werksid.
IF NOT werksid IS INITIAL.
    pnpwerks-sign = 'I'. pnpwerks-option = 'EQ'.
    pnpwerks-low = werksid. APPEND pnpwerks
ENDIF.
insert company code from user own data
GET PARAMETER ID 'BUK' FIELD bukrsid.
IF NOT bukrsid IS INITIAL.
    pnpbukrs-sign = 'I'. pnpbukrs-option = 'EQ'.
    pnpbukrs-low = bukrsid. APPEND pnpbukrs.
ENDIF.
Let me know if this helps.
Regards,
Vijay V

About selection screen validation

Hi all,
        I have query regarding a selection screen.
        I have one field in a selection screen where i ve put the matnr field as a parameter from MARA table.
         My requirement is that when I will select any material by pressing F4 and select the value the corresponding material description will come automatically in another field which I had taken in the Selection screen.I must get it automatically without any push button or execute button.
         Now where I have to write the logic of the code and at which event of the report .
         Please experts help me.
With regards,
Abir.

REPORT ZSRIM_TEMP10.
tables : mara,makt.
data : v_maktx type makt-maktx.
parameters : p_matnr type mara-matnr,
             p_maktx type makt-maktx.
AT SELECTION-SCREEN OUTPUT.
if p_matnr is not initial.
   select single maktx from makt into v_maktx
         where matnr = p_matnr and spras = sy-langu.
    p_maktx = v_maktx.
endif.
I am sorry, this code will works only if you click any enter key etc.. then only Description will appear.
Regards
Srikanth.
Message was edited by: Srikanth Kidambi

Search help on selection screen.

I have a selection screen with
Report name
Variant name
Variant fields
Variant fields is attached to a search help 'Z_Search_variant' and this search help fetches values based on "Report name" "Variant name" on the selection screen.
I am using
AT SELECTION-SCREEN ON VALUE-REQUEST FOR Variant_field
PERFORM f4_help_variant.
FORM f4_help_variant.
call function 'F4IF_FIELD_VALUE_REQUEST'
exporting
   tabname                   = space
   fieldname                 = space
   SEARCHHELP                = 'Z_SEARCH_VARIANT'
SHLPPARAM                 = 'REPORT'
DYNPPROG                  = ' '
DYNPNR                    = ' '
DYNPROFIELD               = ' '
STEPL                     = 0
VALUE                     = Report
MULTIPLE_CHOICE           = ' '
DISPLAY                   = ' '
   SUPPRESS_RECORDLIST       = 'X'
   CALLBACK_PROGRAM          = SY-REPID
CALLBACK_FORM             = ' '
SELECTION_SCREEN          = ' '
IMPORTING
USER_RESET                =
TABLES
    RETURN_TAB                = return_tab
EXCEPTIONS
FIELD_NOT_FOUND           = 1
NO_HELP_FOR_FIELD         = 2
INCONSISTENT_HELP         = 3
NO_VALUES_FOUND           = 4
OTHERS                    = 5
How do I pass value to this search help? Currently I do not see this FM allowing this option? Any other options?

Hi Vinita,
wat i figured out from your problem is u need how to get values from FM so u can do it in this way..
READ TABLE it_return INTO wa_return INDEX 1.
IF sy-subrc = 0.
    wa_output-vkorg = wa_return-fieldval.
ENDIF.
IF wa_output-vkorg IS NOT INITIAL.
    MODIFY it_output FROM wa_output INDEX row_id   * it_output is final ITAB
              TRANSPORTING vkorg.
ENDIF.
CALL METHOD c_alv->refresh_table_display.
CLEAR: wa_return,it_return[],wa_output.

Engent, Who could help about selection-screen.

Similar Messages

Maybe you are looking for