Enhancement Request for Reports

I did search; sorry if I missed a similar request.
I would like the ability to associate a report with a specific connection to avoid the connection selection. Reports not associated would still show the connection selection dialog. Thanks.

Hi,
We do have a more general enhancement logged to identify a "default" connection overall. I'll log this to the mix as well.
-kris

Similar Messages

  • Enhancement request for VAT Report of Customer and Vendor.

    Hello SAP Gurus,
    Have enhancement request for adding new fields in existing VAT report of Customer and Vendor like user id, GL account etc.
    As I am fresher, can you please help me that how I need to approach. Thanks for your support.
    Regards,
    Saleem

    Hello Saleem,
    Almost all fields required for VAT reporting are available in standard tax report
    S_ALR_87012357 .
    You have to configure the layout from the selection screen as below
    regards
    pb

  • (Request for reporting available) is not coming in Cube

    Hi All,
    I have Cube & DSO.
    I  added fields in DSO & Cube.
    Cube1 has Aggregrates built on it.i added 5 infoobjects on it, Now when i load data from DSO to Cube(Request for reporting available) is not coming up. i cant do reporting on it. can anyone help.
    thanks in advance,
    Kiran.

    Hi ....
    Have you done the Roll up ?
    Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
    Regards,
    Debjani....

  • Request for reporting  available icon is missing !

    Hi,
    I have an infocube which has been uploaded by ODS and the data load was successful. 
    But--
    The request for reporting available Icon is missing in the request.
    Prior to this dataload, yes there were falided requests which i had deleted before uplaoding it self.
    Why i am not seeing the icon?
    Raj

    Hi Raj,
    If you are using BI 7, then in the mange tab of the infocube check in the extream right ....
    otherwise it should appear...
    if you are talking abt ODS then you might have missed the step to activate data in ods.
    hope this helps..
    cheer's
    HVR.

  • "Request for Reporting available " is not displayed after loading the data.

    Hi
    A DSO feeds the data to a cube and DSO. In dso reporting sysmbol is present. However in the cube "Request for Reporting available " is not present in the manage tab of the cube.
    Please advise on this.
    Regards
    loyee

    Hi,
    What is the status in Monitor. If it is ok, go to manage of the infocube,
    in that screen on the menu, Environment --> Automatic Request processing. Then you will get three check boxes.
    Click the first check box, (Set Quality status to OK). If you aggregates,  choose second box.
    Hope this helps.
    Regards,
    Rama Murthy.

  • Simultaneous data activation in cube - request for reporting available

    Hi,
    I'm on BW 3.5.
    I am loading several million records to a cube, processing is to PSA first and subsequently to data target.
    I have broken the load up into 4 separate loads to prevent caches from filling up and causing huge performance issues.
    When I load all the data in a single load, it takes 10 hours to load.  When I break it up into 4 loads it takes 3 hours.
    My problem is that during the loading from PSA to data target, the first data load becomes green and ready for reporting before the last one has finished loading, and so the users get inaccurate report results if they happen to run a report before the last request activates.
    Is it possible to get all 4 requests to activate simultaneously?
    I have tried adding an aggregate to the cube, no good.
    I have tried loading the 4 loads to the PSA in sequential order in the process chain, and then loading from PSA to data target simultaneously (side by side), no good.
    Does anyone have a solution?
    Many thanks,
    Paul White

    Hi ....
    Have you done the Roll up ?
    Since aggregates are there on that cube....until and unless you do the roll up that request will not be available for Reporting...
    Regards,
    Debjani....

  • Enhancement Requests for AWM10g

    Hi, before I start in on the enhancement requests I want to say that I am pretty impressed with AWM10g. Definitely a huge step forward in creating AWs. Having said that, I think there are a few enhancements that could be done to the tool to make it even more user friendl.
    Note that these are in no particular order, just ones I came up with while using the tool. I'll add any others that I come across.
    Please don't take this as nit-picking - just trying to help make it better.
    Thanks!
    Scott
    1. On dimension hierarchy types, instead of "value based" call it a "parent / child based" (thats what everyone knows it as)
    2. When creating levels, allow more than one level to be created at a time (currently it closes the dialog after each level is created, forcing you to go back and choose "create levels" over and over again). This may be as simple as having a "Save and create another" button or something.
    3. When typing names in the "system name" boxes, it would be nice if we could simply type the descriptions using spaces, and have the system name automatically replace with an underscore. Right now its a bit tedious to remember to type all names using underscores.
    4. In "mapping" view, move HELP, APPLY, and REVERT buttons off of bottom status bar and up to the top toolbar. There is lots of unused space at the top, creating a second bar at bottom just eats up screen real estate
    5. On "create dimension" dialog, no need for an entirely separate tab for "implmentation details" (that only has two values - generate unique keys or use the existing keys). Put this on the front tab so users don't have to keep selecting over to it (unless of course there are additional values that can show up there?)
    6. Mapping dimensions with multiple hierarchy - seems odd that we have to remap shared levels. Is it possible to make this where you would map all the values in the first hierarchy, and then only map the "missing" levels in the second hierarchy? Seems like an opportunity for hosing things up
    7. Drag and drop ordering when setting up the dimensions in a cube would be nice. Interface is the same as prior version of AWM (pretty clunky)
    8. Bug - when typing in any "name" field, if you highlight the entire field and delete all characters, under the "description" fields only a single character gets deleted.
    9. When there are multiple hierarchies for a given dimension, some sort of visual indicator of which one is set as default (without having to drill into details of each one)
    10. Its difficult (impossible?) to resize panes (for instance, when doing the mapping). Seems like sometimes I click on something by accident (other than the < and > arrows) that resizes the panes, and then I can't figure out how to get them back (other than exiting and restarting)
    11. When writing template out to same name as one that exists, AWM2 is not giving a "do you want to overwrite" prompt
    12. Some sort of clear visual indicator or message when a dimension is not completely "mapped". I had a dimension where I mistakenly forgot to map the leaf level dimension member. I didn't find out about it until I ran a load and the load blew up.
    13. On the XML logging at the end of a load process, the dialog box isn't big enough to show entire error messages if they occur. Since I haven't found a way to actually write the output to a txt file, this makes it hard to debug what is wrong with a solve.

    Anthony - thanks! In the meantime, I've come up with a few more requests / suggestions (and will probably have a few more yet to come...)
    Thanks again!
    Scott
    1) Rather than just showing the "working" bar while a load / solve is going on, would it be possible to replace this with some sort of functionality that queries against the OLAPSYS.xml_load_log table? And perhaps allow the user to click "refresh" or have it auto-refresh at a certain number of minutes so that users can actually see the progress being made?
    2) Since CATALOG view is no longer available, remove the options to have AWM write the log files

  • Is it possible to send a request for report pagination?

    Hi,
    I have a page with 3 regions.
    Only one of these regions is displayed depending on a special request.
    This works fine as long as we don't push the select list for report pagination.
    Do we have any possiblities to send a request when we select another rowrange from the pagination select list?
    At the moment we don't get a request after selecting a new pagination.
    The result is that after the pagination there is no region displayed.
    Thanks in advance
    Ulrike

    Ulrike - For reasons like this, it's best not to use REQUEST to control page rendering behavior. Passing an item value so that it stays in session state gives you more flexibility, e.g., P1_SHOW_REPORT:YES.
    Scott

  • Enhancement request for more fine-grained templates

    JHeadstart version : 10.1.2.0
    I like to have the possibility to define templates on the level of table rows. If I am correct, currently the 'lowest' level of a .jtt template is the $FORM_ITEMS$ token. According to the userguide this token "is used to indicate the place where a form must be generated". My question is now: How can I influence this generation process? For example, I want to embed text-items within <c:if's in order to conditionally set a text-item attribute. Am I right to conclude that on this "deeper" level of a jsp (for instance table-row level), it is not possible to define templates?
    If so, I want to request an enhancement for a further 'fine-graining' of the templating technique.
    Thanks and greetings, Erik
    Message was edited by:
    ekerkhov

    Erik,
    Yes, this is not possible in he current release.
    Your enhancement request has already been implemented for the JDev10.1.3/Faces release. We will the support two kinds of tokens, one that outputs all items as it is today ($FORM_ITEMS$ or $TABLE_ITEMS$), and one token that refers to an individual item. This reference can be bpoth on index number and name:
    FORM_ITEM_1 or
    FORM_ITEM_DepartmentName
    This will allow you to layout the items exactly as you want.
    Note that in the 10.1.3 release, we will also support item-level templates where you can add code to conditonally render items.
    Steven Davelaar,
    JHeadstart Team.

  • Transport request for Report

    Dear Experts,
    I have built a query/ report (in Development System) in Bex. I need to move that report to test system. How to do that? I haven't got any transport request for that. Do i need to create a transport request for that? Could you  give me step by step what to do and how to do, please?
    Thanks,
    Riya

    Riya,
    Please don't ask the same question in different threads, esp as you have not closed out a lot of your previous threads:
    urget please moving to testing system

  • Request for reporting available after rollup. Why not before?

    Hi,
    In infocubes with aggregates, a dataload is not available for reporting until you roll-up the aggregates. This is very unwanted behaviour and we'd like to have the loads available at all times, with or without a rolled up aggregate. All our aggregates are rolled up in the same process chain block after all loads are done. This means that data will not be available for reporting until all loads have finished, something our customers complain about.
    Because parallel rollup jobs collide, rolling up up after every infopackage would make our loadschedule very unflexible (difficult to plan parallel processes).
    Is this possible (by changing a setting somewhere) to change this and make load available for reporting at all times, or is this one of SAP's standard programming decisions without any workarounds?
    Cheers,
    Eduard

    Aggregates data is maintained in aggregate tables.
    Unless, you roll it up after every data load, the aggregate data wont be correct and it wont be consistent with the data in the cube.
    YES< the roll up job will not be complete unless the loading job is compete.
    One suggestion is to review the process chain jobs and see if you can reshuffle the jobs.
    But aggregate roll up has to happen after data loading job of that cube on which aggregate is built .
    Ravi Thothadri

  • Enhancement request for the jsp visual editor

    Hello -
    With respect to the visual editor, could the rendering of adf faces command buttons work the same if you use the TextAndAccessKey instead of Text to define the button text? In 10.1.3, using TextAndAccessKey will cause the buttons to render as either thin buttons without any text (but with 'normal' button height) or barely noticable 'dots' about the size of a comma. (When I see the "dots" it is usually a button in a table selection component.)
    With the buttons appearing "empty", I need to click around a bit and examine the button in the property inspector to make sure that I am working with the correct button.
    Thanks,
    -- Scott

    Hi,
    Open wss_mediumtrust.config & wss_minimaltrust.config. SharePoint 2013(C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\config\).
    Find in wss_mediumtrust.config:
    <SecurityClass
     Name="SqlClientPermission"
     Description="System.Data.SqlClient.SqlClientPermis sion, System.Data,
     Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
    Copy and paste it in to the <SecurityClasses> node of wss_minimaltrust.config.
    In the PermissionSet section of this configuration file, add the following:
    Find in wss_mediumtrust.config:
    <IPermission class="SqlClientPermission" version="1" Unrestricted="true"/>
    Copy and paste it in to the a <PermissionSet> node of wss_minimaltrust.config.
    Here is a similar thread for your reference:
    https://social.msdn.microsoft.com/Forums/en-US/a1c8f2bf-2575-40b4-87f1-4f98462b3234/request-for-the-permission-of-type-systemdatasqlclientsqlclientpermission-systemdata-version?forum=tfssetup
    Best Regards
    Dennis Guo
    TechNet Community Support

  • Enhancement Request for Period End Closing

    Hi All,
    When using Segmented Chart of Accounts, the Period End Closing procedure does not allow you to select different GLs from various companies.
    The Trial Balance for example, does allow you to select the different GL sets by pressing Find in the Selection Criteria.
    In cases where there is a different Retained Earnings accounts for each company on the same Chart of Accounts, you are forced to perform the Period End Closing on a single Retained Earnings account for ALL the companies.
    Please can this be enhanced much like the Trial Balance.
    Kind Regards
    Tanveer

    Tanveer,
    you could try use more than one retained earning account. But in the report, there is expanded button where you can choose the posting various date. I also suggest to post your message to the other forum within business one forum as suggested in the note but I am not sure it will be fulfilled quickly. Maybe in the 2 or 3 or even 5 years later who knows.
    Submit a ticket to SAP support to know the work around.
    Rgds,

  • Enhancement Request for RFC 4021 Support in Mail

    I'm not sure if this is appropriate for this forum, or complies with the click-through agreement which neither I nor the vast majority of anyone here probably read, but here it goes.
    Mail does not appear to support RFC 4021. In particular, there are several header fields that are used by various applications that Mail cannot create in messages, and provides no means for adding in. Of interest to me is the Sensitivity header, which flags the message as having a particular sensitivity. This is used by at least one product (Cisco IronPort) through which mail flows in corporate networks with the device. If it sees this header it will automatically save the message off and send a new email with a URL that the original recipients can use to retrieve the secured message. Now, all of this is done outside of Mail and is a feature of the IronPort product. All that Mail, or any email application needs to do, is to include the appropriate header field.
    I created a support case, but there is no such feature for setting the sensitivity of an email. If it is appropriate for me to do so, I would encourage you to head over to http://www.apple.com/feedback and send feedback asking for support of RFC 4021, either through an explicit GUI interface to set the sensitivity of email or through the ability to include arbitrary headers and values so that future header fields can be added without Apple having to update the application constantly. If it's not appropriate for me to do so, then I would not encourage you to head over to http://www.apple.com/feedback and provide such feedback
    I'd also be interested if anyone knows how Mail processes email, and in particular sending email. My particular example unfortunately includes an exchange server (2007), so I'm guessing that it is not processed by postfix or any other application, and is sent directly from Mail to Exchange. If it were, I supposed it may be possible to include an entry in /etc/postfix/header_checks to look for a header that CAN be included via Mail, such as a BCC to a specific fictitious address, and REPLACE it with the appropriate header field. If anyone is aware of how Mail actually processes email outbound to an Exchange server I'd be interested in those details.
    Thanks,
    Fred Reimer

    I'm not sure if this is appropriate for this forum,
    Mail does not appear to support RFC 4021
    To request an enhancement, try: http://www.apple.com/feedback/macosx.html

  • 6600slide /S40 Enhancement Request for Calendar an...

    Hi experts, I am using calendar in active standby mode, and would really appreciate if calendar takes more than 3 lines from display. Does anyone know how to?
    Following is copied the same request (old 2 years already) from Reinhard (he mentioned 6300 before)
    Thanks
    The 6600 is an excellent phone. I like it very much. I would like to see the following improvements (ideally implemented as a Software Upgrade):
    Active Standby & Calendar
    Active Standby is divided into 4 areas (in Personalise View), for which you can individually set content options. When you set Calendar as content option, only 1 or 2 calendar entries max are displayed (as much as fits into that content area). If the areas below the Calendar area is free, the Calendar should flow over into the empty content areas below it, so that more Calendar entries can be displayed.
    Regards,

    Hi there
    since you seems to be using the calendar actiively, maybe you could help me. I use my calendar in the 6300 everyday but have this problem, when i synchrinize with my Outlook 2007. All my contacts sync perfectly and so do messages, but when i try to sync my calendars (6300 to/from Outlook) it only works the first time. When I open the sync calendar in the pc suite, the sync button is not active. I've tried to reconnect the phone, but it is still not active. On top of the window it says that the phone is not connected, but if I switch to contacts the phone is connected and so it is with the other facilities. Last time i solved the problem by reinstalling pc-suite, but now i have the same problem again. This is quite annoying and **bleep** me of.
    Hope some of you can help me.
    Regards
    John

Maybe you are looking for