Enhancing NUMBER_GET_NEXT when RETURNCODE is 1

Hi,
When NUMBER_GET_NEXT return '1' we know that critical value reached. This return code set within NUMBER_GET_NEXT >> PERFORM LOCAL_BUFFER routine.
Requirement: when ever NUMBER_GET_NEXT returns '1' i have to send a mail to some fixed mail id. Though SAP gives an informatin message, but when in any background job function module NUMBER_GET_NEXT returns '1' , user will not be able to see that message.
according to my analysis as there is no exit , badi or enhancement. So it is not possible other than changing FM with access key.
As this FM called every where I have to write only within FM. not outside of this FM.
Please tell me if it is possible in any other way.
Regards,
Manab.

Hi,
could you, please, tell how did you manage to create implementation for enhancement spot BADI_NUMBER_GET_NEXT?
Within this spot there is already existing enhancement implementation WDK_NUMBER_GET_NEXT, but it does not allow to make any changes.
If I create my own enhancement implementation and when I try to create Badi implementation, it generates the following error message "BAdi is internal SAP; implementation in customer namespace not allowed".

Similar Messages

Only BADi is used in enhancement spot when customer createion?

Only BADi is used in enhancement spot when customer createion?

Only BADi is used in enhancement spot when customer createion?

Difference between implicit enhancement and explicit enhancement

What is the difference between implicit enhancement and explicit enhancement .

Hi Peters,
Implicit enhancement option
Throughout the ABAP system, enhancement options are automatically available at certain pre-defined places. Some of the implicit options are:
u2022 At the end of all the programs (Includes, Reports, Function pool, Module pool, etc.), after the last statement
u2022 At the beginning and end of all FORM subroutines
u2022 At the end of all Function Modules
u2022 At the end of all visibility areas (public, protected and private) of local class
To view all the implicit options available in a source code, choose u2018Edit -> Enhancement Operations -> Show Implicit Enhancement Optionsu2019 from the editor.
Befor that you click on the spiral icon button in the application toolbar
Explicit enhancement option
The Implicit enhancement options are provided at specific source code places explicitly by SAP (Note that these enhancement definitions can also be created by partners and customers in their code).
There are two types of Explicit Enhancement options available. One which can be provided at a specific place - called Enhancement Point, and another which can be used to replace a set of statements u2013 called Enhancement Section. For this, we now have two new ABAP statements, viz.
u2022 ENHANCEMENT-POINT
u2022 ENHANCEMENT-SECTION
When the Enhancement-Section is implemented, only the implementation gets executed and the original code doesnu2019t get executed. This is a new technique, which didnu2019t exist previously in any of the old ways of enhancing, to exclude any standard SAP code from execution. Because of this, there can be only one active implementation of an Enhancement-Section. On the other hand, there can be multiple active implementations of an Enhancement-Point, in which case all the implementations will be executed with no guarantee in the order of execution.
For more information check the following link
[http://help.sap.com/saphelp_nw70/helpdata/en/94/9cdc40132a8531e10000000a1550b0/frameset.htm]
Thanks,
Surya

How do I prevent the Darker Shade Box (color shift) around Vector Objects when Printing

Sorry in advance for the novelette. I am absolutely mystified and frustrated and would love some help! I've been working on this problem for about 30 hours over the last 4 days to figure out what the heck is happening and cannot find an answer through various forms of research.
Basically, when I print a JPEG, I am getting this area (a box) of darker shaded coloring around my heart and love text. I've tested it a million different ways and am at a loss as to what the problem is ... is it an application problem, a color profile problem between my applications and printer, an improper way that I saved my file, etc.
Here is a photo I took of the image printed out (so it is slightly skewed from camera distortion):
The details:
(1) I create graphic art and sell it online. I save all of my printable art as JPEG files because of my customer base (diy hobbyists that print on their home printers without much knowledge base nor graphic design software).
(2) I use both Adobe Illustrator (AI) and Photoshop Elements 11 (PSE11) to design and save my artwork.
(3) I insert JPEG images into Microsoft Word 2003 documents to "test print" since most of my customers use home printers to print. Since most people have this basic software, it is a good gauge of the kind of print out they might get using the same or similar software.
(4) My PSE11 color profile setting is the default sRGB. I have test printed many times and I get the truest colors with this color profile.
(5) My AI color settings are normally also an sRGB color mode, but on occasion, I use a CMYK color mode if I am creating a larger document that I know the customer will need to take to a professional printer to print out.
(6) I do my home printing (for proofs) on an Epson Stylus Photo 1400 (which has the 6 color ink cartridges).
(7) Until this printing problem occurred on this test print out, I always used the "photo enhance" option when I designate settings for my printer via the Microsoft Word documents.
IMPORTANT: This is when I have the color shift?? or color rendering issues?? and it is the only time. If I use the regular ICM/ICC color profile of sRGB, the printing issue doesn't occur. Instead, I have a solid color background instead of this one with the strips of lighter color on the top and bottom. However, I can't control how the customer prints, so I need to feel confident that whatever color profile setting they use, they will not run into this problem. I even test printed the documents over at FedEx and the darker box/color shift did not occur.
(8) The document in question only has 3 sets of objects: the heart, the solid colored rectangle colored background and the text. All 3 objects are vectors, they are at 100% opacity and there are no "special effects" applied.
(9) The image was entirely created in AI this time and exported as a maximum quality JPEG file, although you will see below that I tried many ways to create and save the file so that I didn't have the color band borders on top/bottom.
(10) I regularly use AI for part of my art, then I drag it to my PSE11 open document and it becomes a Vector Object (it cannot by copying/pasting into a PSE11 document). I also regularly export AI images as PNG files, then insert them into an open PSE11 document. This printing issue has not occurred until recently. Here is an example of a very complex AI image I created, then inserted into PSE11 just to add the background (the Teddy Bear and books are AI vector objects) that were exported as PNG files then inserted into PSE11 to integrate with the background image - I test printed with Photo Enhance and had no printing issues:
So, from the research I have done, it looks like it is a color rendering or color space issue with conflicting color profiles in the same document. I checked my color profile settings and both sRGB and CMYK were set to embed ICC color profiles.
I tried changing AI settings to Preserve Numbers (ignore linked profiles) for CMYK, but that didn't work.
I also checked and made sure that not only the document setup showed the sRGB color profile, but that all the objects within the document also were converted to sRGB as well for consistency. That didn't work.
I tried converting the document to CMYK along with the vector objects. That didn't work.
I tried saving the heart image as a PNG file alone, the "love" text as a PNG file alone, both the heart and text together as a PNG files alone. Once saved as PNG files, I inserted them into an open empty PSE11 document - as I normally do. I then added the background color I wanted. That didn't work - the print still showed the color changes.
I tried dragging each vector object separately and even as a group and got the same color change issue when printing.
I tried "expanding" and "outlining" the text before exporting as JPEG, before exporting as a PNG and before dragging as a vector object into PSE11. Expanding the text did not help the situation.
I tried exporting as Adobe PDF, then opening in PSE11, then resaving as JPEG. That didn't work.
I tried flattening transparency (even though there is no transparency in the AI file). That didn't work.
I tried rasterizing the image. That didn't work.
Thinking that the file might be corrupt, I started from scratch and redesigned the same heart and love text. Unfortunately, I had the same problem as before. At this point, my AI started becoming buggy and would not open new files. It happened repeatedly and I decided it was best to uninstall and reinstall AI (and maybe that would fix the problem).
I created just the heart in AI, then inserted it into an open PSE11 document (both after exporting as PNG and also by dragging as Vector Object from AI). It seemed to work. I could both drag the vector into PSE11 from AI and export from AI as a PNG, then insert into open PSE11 document with a background color - and it printed a solid background.
So, I thought that reinstalling and setting back to defaults worked. But, then I added the love text around the heart and tried exporting as JPEG files and the same problem continued to recur. Whether I dragged as a Vector object into PSE11 (the heart object and love text separately and also another time with the vector objects dragged as a group) or saved them as PNG files and inserted into PSE11 - I got the different shades of color on what should be a solid background. I even tried saving the PSE11 as a PSD file first, then resaving as JPEG and I tried saving as PNG and printing and this didn't help solve the problem.
I really think it is some color conflict issue but I can't figure it out. I am definitely not very knowledgeable about color profiles and how to sync all my devices, however, as I mentioned, this was not an issue until recently (and I think??? I recall changing the CMYK setting from Preserve Numbers to embed color profile a month or so ago - however, it should have been solved when AI went back to its defaults upon reinstall).
The reason I believe it is a color rendering/color space issue is because I could see the color output when I saved the JPEG with CMYK color profile versus sRGB color profile and the sRGB colors were much richer, not surprisingly. The top and bottom colors matched the sRGB printout and the middle darker box section matched the CMYK printout.
I am sure it is something fundamental or simple and I am completely overlooking it. I wish it were just a transparency issue, because people know how to fix or do workarounds for it. But, there are no vector objects with any transparency ...
If I missed some detail, I apologize. Any help would be a dream come true at this point! lol
Thank you!

Okay, I got motivated to try again. From doing a bit more research on troubleshooting AI printing problems, the Adobe article talks about print drivers. It was advised to uninstall and reinstall the print driver if the printing issue persists. So, I did. Unfortunately, I still had the same result after reinstalling and trying a test print! Ugh.
So, as Jacob said upfront, I seem to have an overactive print driver that is trying too hard (and it is a non-postscript printer which I realize is part of the problem).
There are so many variables in my situation as to how I create art and save/export art. I sometimes work solely in AI, sometimes solely in PSE and sometimes I use both programs to create. Consequently, I will:
(1) export directly from AI as JPEG if I am not adding PSE11 artwork.
(2) export directly from AI as PNG if I plan on inserting that image into PSE11 to add to artwork I have created in PSE11.
(3) drag vector objects as a Smart Objects directly from AI to PSE11 to add to artwork I am creating in PSE11 if I know I will playing with the vector object and resizing in PSE11.
So, I did a test print using scenario 2, where I inserted the heart and love text PNG (AI created vector object) into an old PSE11 document. This old document already had a vector object from AI with a solid background and I knew it printed correctly. So, after inserting this new PNG from AI into this old document, it printed correctly using the photo enhance mode.
However, I haven't had a chance to actually create new art in the older AI files (that I know print properly), resave as something else and try another test print (either by exporting as JPEG and printing in Word or by exporting as PNG file and inserting into PSE11 document, then saving as JPEG and printing in Word).
After testing the different possibilities of ICM settings within my printer, I found that the JPEG images printed out with the truest colors and best quality if I simply selected "no color management" from the printer. Shocker, huh? lol
MY SOLUTION: So, what I think I will simply do is add an instruction sheet with the printables I sell, explaining that the color profile setting should never be handled by the printer so make sure to turn off color management by printer (and if they feel they must use the printer for color management, make sure the setting is sRGB since I embed that color profile in my JPEG's).
Edited to add: Since my issue was never about how I could print a successful image (I knew I could simply change the color profile settings), but rather about how to make sure that customers would get consistent and high quality print outputs of my digital images, this seems like the best approach.
I don't think I will every really know exactly why I am now getting color shifts in the "photo enhance" mode when I did not have this problem a couple months ago - applying the same methods of creating artwork. I was concerned that I was saving/exporting using incorrect or mismatched color settings or something of that nature. However, since I went through the process of making my color spaces the same for everything, and I still have issue, clearly that is not the culprit. The only thing I can do to solve the problem and it is a straightforward solution anyway -> is to educate the buyer on how to print successfully (don't use photo enhance! ha ha).
Thanks again to everyone who chimed in and offered advice!

BADI having multiple enhancement implementations

Hi,
The requirement is to have multiple implementations of a BADI. In the program i have to call each of the implementations of this specific BADI.
Is this how to do it.
1. Firstly i just know the enhacement spot details like the BADI name and the interface name. With this information i want to find all the enhancement implementations that exists for the given BADI name or interface name.
I tried the following method, but does not seem to work.
CALL METHOD cl_exit_master=>create_obj_by_interface_filter
EXPORTING
    inter_name                = 'IF_SSP_USER_SETTINGS'
   method_name               =
   flt_val                   =
   internal                  = SXRT_FALSE
   caller                    =
   delayed_instance_creation = SXRT_FALSE
IMPORTING
    exit_obj_tab              = lt_EXIT_OBJ_TAB
2. Once i get all the enhancement implementations, i want to call them one by one, i.e. a specific method of each of them.
Am i right in what i am doing given my requirement as stated above. If not, please direct me as to how i can achieve it.
Thanks and Regards,
Madhura Lobo

Arun,
Many thanks, and you're right about having different enhancement sets active, although you can control which enhancement set is active via the BADI COMPONENT...something...
However, in my case I shall remove the other two unused enhancement sets as this is just asking for trouble, if they remain.
I must admit I would like to see more control, perhaps a warning, to say that there is already an active enhancement set when you create a new one. This can easily happen when you have multiple developers on the project, of which some are junior.
Anyway, your time is much appreciated.
Jason

Delete customized enhancement objects issue

Hello everyone!
I'm quite new to SAP, and I was trying to make an enhancement to display additional field in the Product Header area. I did some steps, but at some point wanted to start again and delete enhancement. When I've tried to do that with the button "Delete component enhancement" warning message appeared that enhancement is not empty. Then I went to tc sm34 cluster BSPWDVC_CMP_EXT and deleted controller substitutes and enhancement definition there. After that I wanted to delete obsolete objects from the Z package and that's the point where the issue comes in. When I select, for example, BSP Application or classes created by wizard, and try to delete them, GUI just hangs. No errors, no warnings. If I try to create enhancement again without deleting obsolete objects, it asks me if I want to overwrite the BSP application, that was created with my first attempt. If I choose yes, it hangs in the same manner.
Is there a way to solve this? Please advise.
Thanks in advance,
Alex.

I've actually followed note 1122248, but at the step: "Then go to the BSP components in the ABAP workbench (SE80) that are used to store the enhancements. Search for the obsolete objects and delete them" GUI just hangs.
In addition, even if I try to create new package, or class, or even save a program in a local object GUI hangs. Is it some global problem?
Regards.

Line drawings distorted by Adobe Reader's Thin Line Enhancement feature

I am working with InDesign CS6 on an engineering textbook with approximately 1300 line drawings. When a pdf exported from InDesign is viewed in Adobe Reader XI, the line widths of the drawings are distorted by Reader's Thin Line Enhancement feature. The default setting for Thin Line Enhancement in Reader is on. I understand that Reader's user features cannot be controlled by a document. Is there anything I can do in InDesign to would reduce the effect of Reader's Thin Line Enhancement on the image quality?
(Ironically, the art work drawn in Illustrator in a pdf and exported from InDesign looks fine in Google Chrome, but wretched in Adobe Reader!)

Thank you for your response. The textbook is to be printed and presented as an ebook. The print version is not a problem nor is the ebook version when viewed in a pdf viewer other than Adobe Reader, or in Adobe Reader in the non-default state with the Thin Line Enhancement feature disabled.
I attempted to resolve the Adobe Reader Thin Line Enhancement problem by increasing line widths and ensuring that interrupted lines segments were aligned. Sadly, the overall size of the illustrations limits the the maximum width of the thinnest lines and Thin Line Enhancement problem persisted.
The reason I ask if there is anything which can be done within InDesign to counter the distortion of Reader's Thin Line Enhancement is the following observation. An MS Word document with the same illustrations embedded as png graphics and saved as a pdf does not suffer the Thin Line Enhancement distortion when viewed in Adobe Reader. I am hoping that whatever is done when MS Word saves a document as a pdf can be replicated when InDesign exports a pdf. Unfortunately, I am constrained by my publisher to link rather than embed the graphics. I have experimented linking eps, Illustrator, and pdf graphics files but they pdfs exported from InDesign were distorted when viewed in the default configuration of Adobe Reader.
I must disagree with your assertion that the only correct way to view the pdf is in Adobe Reader. Adobe Reader distorts the images unless the user has disabled the Thin Line Enhancement. I believe that I am a typical user of Adobe Reader in that I was unaware that the feature existed until recently. I mistakenly presumed that what may have been distorted graphics were simply poor quality graphics. Given my choice, I would hope that none of the future readers of the text use Adobe Reader, but, unfortunately, I know that many will. That is why I am attempting to resolve this problem.

Enhanced Fields in IDoc Message Type CRMXIF_ORDER_SAVE_M

Dear Experts,
I have enhanced the Business Transaction with EEWB and is used in Complaint Handling scneario. Now, I need to send the IDoc for the complaints. So, I have used the Message Type CRMXIF_ORDER_SAVE_M for this. But this message type does not have the Custom Fields which were enhanced. When I searched on the internet, I found the solutions to Re-generate the IDoc after adding fields in CRMXIF_CUSTOMER_H Segment. But when I try to do that it is asking for Access Key. I think there must be another way.
Please guide me.
Regards,
Sreenivas Raju.

Hey Sreenivas,
Standard provided Idoc will not have segments for Z fields that you add using AET/EEWB. How did you try to regenerate Idoc? You need to use transaction BDFG to generate a custom Idoc.
Follow the steps below.
1. Create a Z function group.
2. Run BDFG. Enter 'CRMXIF_ORDER_SAVE' in parameter for function Module and press enter. It will list the available message types including 'CRMXIF_ORDER_SAVE_M'
3. Press Create button in application toolbar. A popup will come. Give a name for new message type. Another popup will come, give names for inbound/outbound functions using the Z FG you created, suitable development class and press enter.
4. Now view your message type. Go to the idoc type and release it.
5. Finally selecting your new Z message type, go to menu Edit->Idoc Type and Segment Type->Release. Release your objects. There may be a few popups, respond accordingly.
6. Maintain partner profile settings. Process code will be APLI or APLM as per your need.
Voila!! You have your new message type having segments for Z fields.
Let me know the outcome.

How to use Enhancement Framework in ECC 5.0 and 6.0

hi
is there any good tutorials on enhancement framework? i have gone through the help but its not very clear. if anyone has stepby step guide will be useful.
~Suresh

This is an old question... but i think it is very useful for the developers if anyone search it and find my answer relevant like it with immediate effect.....
What is Enhancement Framework?????????
Enhancement Framework is the new paradigm to bring all enhancement techniques under one roof. It can also be switched using Switch Framework. The following are different enhancement technologies available under this framework.
• Source Code Enhancement
• Function Group Enhancement
• Class Enhancement
• Kernel-BADI Enhancement
Semantically related enhancement options are grouped under a ‘Simple Enhancement Spot’. ‘Composite Enhancement Spot’ contains one or more of Simple and other Composite Enhancement Spots. On the other hand (implementation side), various related implementation elements are grouped under a ‘Simple Enhancement Implementation’. A ‘Composite Enhancement Implementation’ can contain one or more of Simple and other Complex Enhancement Implementations.
1.Source Code enhancement
Whenever enhancement needs to be incorporated directly into the ABAP source code, this technology shall be provided. Implementing this technology is also called as Source Code Plug-In. There are two types of Source Code enhancements possible.
• Implicit enhancement option
• Explicit enhancement option
>>>Implicit enhancement option
Throughout the ABAP system, enhancement options are automatically available at certain pre-defined places. Some of the implicit options are:
• At the end of all the programs (Includes, Reports, Function pool, Module pool, etc.), after the last statement
• At the beginning and end of all FORM subroutines
• At the end of all Function Modules
• At the end of all visibility areas (public, protected and private) of local class
******Note that, in order to implement any of these Source code enhancements, you need to be in the ‘Change Enhancement mode’ (the spiral icon available in the editor). Technically the source code plug-in implementations are stored in a separate include program and not as part of the original source program.***********
>>>>Explicit enhancement option
The Implicit enhancement options are provided at specific source code places explicitly by SAP (Note that these enhancement definitions can also be created by partners and customers in their code).
There are two types of Explicit Enhancement options available. One which can be provided at a specific place - called Enhancement Point, and another which can be used to replace a set of statements – called Enhancement Section. For this, we now have two new ABAP statements, viz.
• ENHANCEMENT-POINT
• ENHANCEMENT-SECTION
When the Enhancement-Section is implemented, only the implementation gets executed and the original code doesn’t get executed. This is a new technique, which didn’t exist previously in any of the old ways of enhancing, to exclude any standard SAP code from execution. Because of this, there can be only one active implementation of an Enhancement-Section. On the other hand, there can be multiple active implementations of an Enhancement-Point, in which case all the implementations will be executed with no guarantee in the order of execution.
we mainly use above framework .......if nybody need further and more information let me knw...

Search help in screen enhancement

Hello Guys iam having a requirement in which i need to select value in the newly enhanced field .when i select the value corresponding text should be appear besides that value.i developed two different ztables for value and the text and these 2tables are maintained by view.can anybody help me in achieving my requirement .ur help will be greatly appreciated.
Regards
Janapathi

Hello,
Use FM 'F4IF_INT_TABLE_VALUE_REQUEST' ....
Regards,
Vishu

How to enhance/modify standard module in PBO

hi
In Program SAPLBARM
screen no. 0800
i want to add my code in PBO MODULE set_dynpro.
can you post your valuable replies with the procedure how to add my code.?
shall i go for access key, or with enhancement.
note: when i tried to add code with new enhancement it is giving syntax error.( because we have to add code in module ... end module)
standard code is:
IF rm61b-budat IS INITIAL.
    MOVE sy-datlo TO rm61b-budat.
ENDIF.
IF rm61b-bldat IS INITIAL.
    MOVE sy-datlo TO rm61b-bldat.
ENDIF.
Mycode will be
IF rm61b-budat IS INITIAL.
    MOVE space TO rm61b-budat.
ENDIF.
IF rm61b-bldat IS INITIAL.
    MOVE space TO rm61b-bldat.
ENDIF.
waiting for replies
Thanks
surya

Many thanks for your help.
I managed to set a new standard web template based on 0ADHOC but now I've found a new issue: in the WAD, I have created a new web template also copied from 0ADHOC. This web template will embed a query and the web report will be executed from WAD, not from BEx. The problem is that the different buttons (Save View, Bookmark, Variable Screen, Export Excel, Export to CSV, etc)don't seem to work when I click on them once the report is showing the results.
Can you please give me any idea on what's happening and if there's anything else I should do?
Many thanks in advance.
Inma

SC Webdynpro Enhancement Post Exit impacts to BBP_PD_SC_GETDETAIL

Hi,
SC delivery address Webdynpro component Enhancement Post Exit Method defaults c/o name, phone and email fields using
existing attribute field. In this scenario values are populated on the screen and saved to the database. But in the Doc check BADI BBP_PD_SC_GETDETAIL will not retrieve the c/o name, email and phone while saving the shopping cart. SAP responded saying that i have to perform update in post exit. Below are the classes/Methods referred by SAP.
"/SAPSRM/IF_CLL_MAPPER~UPDATE" from class /SAPSRM/CL_CH_WD_DODM_SHIPTO,
there is a method call "CALL METHOD lo_pdo_shipto->update_item_partners
Issue is still not resolved after using above methods.
But if user manually enters a vlaue there is no issue everything works fine. Issue is only when system defaults and as per SAP screen changes are not picked unless it is updated. Not sure what update means?
In web dynpro enhancement framework when code is written in post exit is there any update process for buffers to be done? if so can you let me know how?
Thank You,
Vineela

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Enhanced slideshows in iWeb

What exactly are "enhanced" slideshows (when using a .mac account)?
I am trying to figure out how to create the "reflection" effect I have seen on several iweb sites (with the black background).
Thanks for the help.

In every iWeb template is a "Photos" page from which a slideshow can easily be created. The slideshow is displayed on a black background and each photo has a "reflection" effect - as you noticed. Here's what iWeb's Help says about it:
Drag photos to a Photos template. If you're adding more than a few photos, this method is an easy way to organize photos and include captions. The Photos templates also include a Start Slideshow button so that your visitors can view your photos as a slideshow.
To add photos and captions using a Photos template:
Click the Add Page button (shown above) or choose File > New Page.
In the template chooser, select a template in the list on the left, choose Photos from the thumbnails on the right, and then click Choose.
Drag photos (from the Finder or the Photos pane of the Media Browser) to the photo grid on the Photos page.
You can drag individual photos, multiple photos (by Shift-clicking or Command-clicking), or a whole album. As you drag over the template, a blue rectangle indicates the area of the photo grid. The first photo you add replaces all the placeholder photos on the page. The photo grid holds up to 99 photos.
Note: If you drag a photocast (a published album), the URL for the RSS feed is also added to the page.
To add a caption to a photo, click the placeholder text below a photo and type a caption.
You can change the number of columns and the height of captions using the Graphic Inspector.

Break point in enhancement

hi all,
How do we set a break point in a enhancement.
When i try to create a break point I am getting a message
'THE POSITION OF THE BREAK POINT CANNOT BE DETERMINED'
I know that the code in the enhancement point is in a include program.
but how do i know the name of that program?
can i set the break point in the include program?
Thank you,
Krishna dev

>
Suresh Datti wrote:
> I'm on ECC6 (NW07 SP14) & so far did not have any problems setting up either session or external breakpoints.
>
> ~Suresh
I am on ECC6.0 and same release, i am also able to setting the break points both session and external. But not on ENHANCEMENT SPOTS.
If there is any include in the implementation then i can go to that include program and able to see the break point. But not on ENHANCEMENT or inbetween ENHANCEMENT and ENDENHANCEMENT.
Do you know why..? I tried even before. I thought there is some problem..

ENHANCEMENT SPOT implementation - STEPWISE

Hello all,
I wanted to implement enhancement spot in standard SAP code.I will be thankful if somebody can tell me the steps to implement ENHANCEMENT spot.
Thanks.

Hi Sandeep
I will share some basic knowledge on them
Enhancement points are regions where can insert our code to suit customer needs...Spots are subsets of points and created inside these points..for an enhancement point multiple active spots can exist
For enhacement-sections : the main idea is to provide a spot to customise the existing process..eg:SAP has done a select criteria..but you need to filter it more by adding a where condition..in that case SAP suggests using Enhancement sections..At any time the first active enhancement section works...even if multiple sections are created(though ideally multiple sections are not allowed to be created)..if you do the procedure below you can see that enhancement-section when a spot is created for it...the code in the parent section is copied and given in the editable mode
Creating spots implementations for points/sections are given below................................................................
to Create a spot in the standard code...click on the spiral icon..screen changes to a different color...place cursor on ENHANCEMENT-POINT/ENHANCEMENT-SECTION keyword of the spot you require to create implementation for...righ click -> "enhancement implementation -> "create" -> a table control comes -> at the bottom "CREATE" button to be clicked" ...give a name and text in customer name space and save -> select the same name just given in the table control ..press 'Tick' .....you will get a space where code can be written..write the code.....save and activate
Also check the following blogs on enhancement framework
/people/thomas.weiss/blog/2006/01/24/what-the-new-enhancement-framework-is-for-150-its-basic-structure-and-elements-for-beginners
/people/thomas.weiss/blog/2006/03/15/the-new-enhancement-framework-part-2--what-else-you-need-to-know-before-building-an-enhancement
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
/people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
Reward if helpful and revert back for clarifications
regards
Byju

Enhancing NUMBER_GET_NEXT when RETURNCODE is 1

Similar Messages

Maybe you are looking for