Enter a valid basic type - BW IDoc type RSSEND is not same as the SS IDOC

Hi,
I am connecting the ERP system to BW system, and am getting error:
CHECK(context menu source system):
@5C@     BW unknown in source system     RSAR     8
@5C@     The BW IDoc type RSSEND is not the same as the source system IDoc type     RSAR     371
RESTORE(context menu source system):
Information: Enter a valid basic type
Information help:
Enter a valid basic type
    Message no. E0434
Diagnosis
    An entry with the key /BD2CLNT100/LS//RSSEND//// is to be inserted in
    table
    EDP13.
    The value 'RSBEND' is not valid for field IDOCTYP.
Procedure
    Check whether basic type RSBEND exists.
help required

Hi,
Please find the below link may useful.
http://wiki.ittoolbox.com/index.php/Re-Connect_R/3_and_BW
Reg,
Venkat

Similar Messages

IDOC order of columns not same as the data source

Hi,
I am from non SAP background. We are using Informatica to pull data from SAP ECC using the Business Content for Integration by pulling data from IDOCS. Here is my problem:
1) We identified a particular data source (0FI_GL_4) for full mode data pull using Informatica. However, during extraction we found that the order of ports (columns) in the datasource and that generated in the IDOC are not the same. As a result, the loads are failing due to data conversion or mismatch errors.
Question is,how do we ensure that the order of columns in the IDOC generated is the same as that in 0FI_GL_4?
Thanks,
R.

Hi,
Please find the below link may useful.
http://wiki.ittoolbox.com/index.php/Re-Connect_R/3_and_BW
Reg,
Venkat

The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

we are using VS 2013. i have created new build definition and run that created build its getting failed and showing error message as "The type or namespace name 'VisualStudio' does not exist in the namespace 'Microsoft' (are you missing an assembly
reference?)" and "The type or namespace name 'WinComboBox, UITestControl, WinTitleBar.....etc' could not be found (are you missing a using directive or an assembly reference?)". in the error log is showing the error number are "error CS0234
& error CS0246".
Actually i have created build for automation execution from MTM lab environment. i have to assign the build to the test plan. once the build is passed , i will assign to the test plan and run with automation options.
if i build the solution its getting successfully build. but when i run the created build definition it show the error message's.
Could you guide me how to resolve the above error's ?
Thanks in Advance...

Hello Divakar Ponnada,
I have checked the error CS0234 from here:
http://msdn.microsoft.com/en-us/library/0e92xd7b.aspx
It means your project cannot find the proper reference to your type "Visual Studio" from the namespace Microsoft.
May I ask this question, does your build definition means something like the following blog described?
http://www.asp.net/web-forms/overview/deployment/configuring-team-foundation-server-for-web-deployment/creating-a-build-definition-that-supports-deployment
"A build definition is the mechanism that controls how and when builds occur for team projects in TFS. "
If that is the problem, may I ask whether your build agent is in the same machine where you build your application?
The build agent will first search for the reference from its local GAC and if it cannot find it, the error like you said will reports. Please manually build your project from your build agent machine to see the result, or install Visual Studio to your build
agent machine. In that way I think your problem may fixed.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The type or namespace name 'Optimization' does not exist in the namespace 'System.Web'

App_Start\BundleConfig.cs (1): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (4): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (8): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
I'm getting the above errors when attempting to create a remote build.
I've tried the solution found here (http://blog.davidebbo.com/2014/01/the-right-way-to-restore-nuget-packages.html) but no luck.

Hi,
I have an asp.net mvc project in Visual Studio 2013. I'm hosting it on Visual Studio Online.
The project builds fine on my local machine/Visual Studio 2013. When i try to do a build on Visual Studio Online (i created a build definition there), i get similar errors.
App_Start\BundleConfig.cs (2): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\FilterConfig.cs (2): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\RouteConfig.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Controllers\HomeController.cs (9): The type or namespace name 'Controller' could not be found (are you missing a using directive or an assembly reference?)
Global.asax.cs (5): The type or namespace name 'Mvc' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
Global.asax.cs (6): The type or namespace name 'Optimization' does not exist in the namespace 'System.Web' (are you missing an assembly reference?)
App_Start\BundleConfig.cs (9): The type or namespace name 'BundleCollection' could not be found (are you missing a using directive or an assembly reference?)
App_Start\FilterConfig.cs (8): The type or namespace name 'GlobalFilterCollection' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (11): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (16): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
Controllers\HomeController.cs (23): The type or namespace name 'ActionResult' could not be found (are you missing a using directive or an assembly reference?)
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Helpers, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Optimization". Check to make sure the assembly exists on disk. If this
reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL".
Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Deployment, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "System.Web.WebPages.Razor, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35,
processorArchitecture=MSIL". Check to make sure the assembly exists on disk. If this reference is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "WebGrease". Check to make sure the assembly exists on disk. If this reference is required
by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Antlr3.Runtime". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Could not resolve this reference. Could not locate the assembly "Newtonsoft.Json". Check to make sure the assembly exists on disk. If this reference
is required by your code, you may get compilation errors.
C:\Program Files (x86)\MSBuild\12.0\bin\amd64\Microsoft.Common.CurrentVersion.targets (1697): Assembly strong name "System.Web.Mvc, Version=__MvcPagesVersion__, Culture=neutral, PublicKeyToken=31bf3856ad364e35, processorArchitecture=MSIL" is
either a path which could not be found or it is a full assembly name which is badly formed. If it is a full assembly name it may contain characters that need to be escaped with backslash(\). Those characters are Equals(=), Comma(,), Quote("), Apostrophe('),
Backslash(\).

Error on new windows 8.1 project: The type or namespace name 'Foundation' does not exist in the namespace

I upgraded to win 8.1 and VS 2013. I created a new Windows 8.1 C# grid project and tried to compile it and I'm seeing the following error: Error 1 The type or namespace name 'Foundation' does not exist in the namespace [my namespace](are
you missing an assembly reference?)
The errors are in navigationhelper.cs line 59
[Windows.Foundation.Metadata.WebHostHidden] // Foundation has the squigglies
public class NavigationHelper : DependencyObject
and app.xaml.cs line 68 ==> rootFrame.Language = Windows.Globalization.ApplicationLanguages.Languages[0]; which causes this error: Error 2 The type or namespace name 'Globalization' does not exist in the namespace [my namespace] (are you missing
an assembly reference?)
Windows phone and mvc projects are working fine and I've installed all the updates and even tried to fix vs 2013.
Any help Is greatly appreciated.

I did some more investigation and noticed that if I create an app with a "." in the name then this problem occurs. For example create a windows store project with the default name "App1": this will compile.
However if I name the project "App1.Forms" to correspeond with the default namespace I want, then this problem occurs. Still investigating but anyone should be able to repro it with that step.

The type or namespace name 'BusinessData' does not exist in the namespace 'Microsoft.SharePoint' (are you missing an assembly reference?)

I am trying to compile my SharePoint 2010 solution(VS2010) in VS2013 to deploy in SP2013, i have removed all old 14 ref and added 15 ref for microsoft.SharePoint, office.server and other assemblies.
still i am getting "The type or namespace name 'BusinessData' does not exist in the namespace 'Microsoft.SharePoint'
(are you missing an assembly reference?)"
did i miss any step here or any version issue?
any suggestions to resolve
Thanks
S.Venkata Appaji

Hi,
Just confirm that Target Frame work has been changed to 4.5 or not, if not changed it to 4.5 and give it a try. Then also it gives error then check the SP reference, dll properties and check its version(it should be 15.0.).
PS:-You can fine target framework under project properties->Application-> Target Framework.
Regards,
MS

Message type is not populating in the Inbound idoc control record

Hi,
I have created an Inbound Idoc function module and have done the necessary Idoc settings. But, while testing in WE19, I observed that control record is not getting populated with message type and it is dumping.
The settings which I have done in WEDI as follows:
1. Created Idoc segments with necessary fields and released
2. Created Idoc type for the segment type
3. Created message type
4. Assigned message type to basic type
5. In the inbound processing settings,
filled the ALE attributes with the Idoc function module name and input value '0'
6. Assigned FM to basic type and message type
7. Created process code and assigned the process code to message type
Please let me know, the reason for the message type not populating in the control record. Useful answers will be surely rewarded.
Best Regards,
Mallika

Hi,
Maintain partner profile (Transaction code WE20) for the message type you defined in WE81 and put your process code in partner profile and check your logical system settings also in transaction SALE.
Thanks
Rahul

Segment E1EDP36 not active in the DELFOR02 IDOC type.

Hi All,
I have been working with creating extensions for Idoc type DELFOR02 inn ECC 6.0. But for the basic idoc type DELFOR02 , the segment E1EDP36 is not active here.i.e., the idoc generated does not carry data for this particular segement.
This segment depends on entries in a structure xisautoeklwes ( include LEINMF3S, line 130). The underlying table for this structure would be ISAUTOEKLWES(Last Deliveries for FLAB).
Could anyone throw light on how this structure will be filled or how it has to be filled if I can make changes to the customer exit available there.
Thanks,
Savitha Patil

Hi Gearge,
To add custom segments, you should create an extension.
the TCODE is we30.
Refer this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/frameset.htm
Regards,
Ravi

BI Idoc type not same as the source system Idoc type

Hi Experts,
We have refreshed BI 7.0 from production to quality system and while restoring in source system in RSA1 we are getting error message " BI Idoc type ZSZD005 is not the same as source system Idoc type ZSAD008" with ID-RSAR371
Quick response would be really appreciated
Regards,
RaviChandra

Hope this will be helpful for you
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a04af5ab-5737-2b10-67aa-88e25e80b325

Experiencing "The type or namespace name 'DirectoryServices' does not exist in the namespace 'System' (are you missing an assembly reference?)" compilation error

I am just starting to implement a new user login authentication process wherein after prompting user for username & password, I hope to authenticate them againts our company Active Directory user data. Since I am just starting, I only have very few things
done at this point which is how I wanted to work on this so that my development environment is still at its simplest state.
I am using the following for development:
MS-Visual Studios Professional 2013 Version 12.0.30501.00 Update 2, and
MS .NET Framework Version 4.5.50938.
Here are my project solution's current items:
Web.config:
<?xml version="1.0"?>

<configuration>
<system.web>
<compilation debug="true" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
</system.web>
<system.webServer>
<defaultDocument enabled="true">
<files>
<add value="Login.aspx" />
</files>
</defaultDocument>
</system.webServer>
</configuration>
Web.Debug.config:
<?xml version="1.0" encoding="utf-8"?>

<configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">

<system.web>
<compilation xdt:Transform="RemoveAttributes(debug)" />

</system.web>
</configuration>
Web.Assemblies.config:
<?xml version="1.0"?>
<configuration>
<system.web>
<compilation debug="false" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" />
<assemblies>
<add assembly="System.DirectoryServices, Version=4.0.0.0, Culture=neutral PublicKeyToken=b03f5f7f11d50a3a"/>
</assemblies>
</system.web>
</configuration>
Login.aspx:
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="Login.aspx.cs" Inherits="Login" %>
<!DOCTYPE html>
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<div id="loginForm" style="height: 562px; width: 399px; margin-left: 0px" title="Login Form">
    
<asp:Label ID="loginPageLabel" runat="server" Font-Bold="True" Font-Names="Arial Black" Font-Size="Large" Text="Please Log In"></asp:Label>
<br />
<br />
        
<asp:Label ID="loginUsernameLabel" runat="server" Text="Username:"></asp:Label>
   
<asp:TextBox ID="loginUserNameTextBox" runat="server" OnTextChanged="loginUserNameTextBox_TextChanged" Width="213px" Wrap="False" AutoPostBack="True" TabIndex="1"></asp:TextBox>
<br />
<br />
        
<asp:Label ID="loginPasswordLabel" runat="server" Text="Password:"></asp:Label>
   
<asp:TextBox ID="loginPasswordTextBox" runat="server" OnTextChanged="loginPasswordTextBox_TextChanged" Width="212px" Wrap="False" AutoPostBack="True" TabIndex="2"></asp:TextBox>
<br />
<br />
                           
<asp:RadioButton ID="loginUAradioButton" runat="server" Font-Bold="True" OnCheckedChanged="loginUAradioButton_CheckedChanged" Text="TUPSS Associate" AutoPostBack="True" TabIndex="3" />
  
<asp:RadioButton ID="loginAFradioButton" runat="server" Font-Bold="True" OnCheckedChanged="loginAFradioButton_CheckedChanged" Text="Area Franchisee" AutoPostBack="True" TabIndex="4" />
<br />
<br />
<br />
                            
<asp:Button ID="loginSubmitButton" runat="server" Font-Bold="True" OnClick="loginSubmitButton_Click" Text="Log In" TabIndex="5" />
               
<asp:Button ID="loginCancelButton" runat="server" Font-Bold="True" OnClick="loginCancelButton_Click" Text="Cancel" TabIndex="6" />
<br />
<br />
  
<asp:Label ID="loginStatusInstructionLabel" runat="server" Text="Status/Instruction:"></asp:Label>
<br />
  
<asp:TextBox ID="loginStatusInstructionTextBox" runat="server" Height="230px" MaxLength="100" Rows="12" TextMode="MultiLine" Width="360px" EnableViewState="False" OnTextChanged="loginStatusInstructionTextBox_TextChanged" ReadOnly="True" TabIndex="-1"></asp:TextBox>
</div>
</form>
</body>
</html>
Login.aspx.cs:
using System;
using System.DirectoryServices;
public partial class Login : System.Web.UI.Page
private string uName; // user-entered username
private string pWord; // user-entered password
private int loginLoadCycles; // just keeping track of how many times Page_Load is called
protected void Page_Load(object sender, EventArgs e)
if (this.loginUserNameTextBox.Text == String.Empty &&
this.loginPasswordTextBox.Text == String.Empty &&
this.loginUAradioButton.Checked == false &&
this.loginAFradioButton.Checked == false)
this.loginInit();
this.setLoginVisibilityAndFocus();
this.loginLoadCycles += 1;
private void loginInit()
this.uName = String.Empty;
this.pWord = String.Empty;
this.loginLoadCycles = 0;
private void setLoginVisibilityAndFocus()
// Decide on whether or not the Login submit & cancel buttons should be enabled or not
if ( this.loginUserNameTextBox.Text == String.Empty ||
(this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == false) )
this.loginSubmitButton.Enabled = false;
this.loginCancelButton.Enabled = false;
this.loginStatusInstructionTextBox.Text = "Please specify if you are a TUPSS Associate or an Area Franchisee by checking either the 'TUPSS Associate' or 'Area Franchisee' checkbox.";
else
this.loginSubmitButton.Enabled = true;
this.loginCancelButton.Enabled = true;
if (this.loginPasswordTextBox.Text == String.Empty)
this.loginStatusInstructionTextBox.Text = "Now that you have entered your username & type, please enter your password.";
else
this.loginStatusInstructionTextBox.Text = "When you are ready, please select either the Log In button to login, or the Cancel button to abort.";
if (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == false)
this.SetFocus(this.loginUAradioButton);
else if (this.loginUserNameTextBox.Text == String.Empty)
this.SetFocus(this.loginUserNameTextBox);
else if (this.loginPasswordTextBox.Text == String.Empty)
this.SetFocus(this.loginPasswordTextBox);
else
this.SetFocus(this.loginSubmitButton);
protected void loginUserNameTextBox_TextChanged(object sender, EventArgs e)
protected void loginPasswordTextBox_TextChanged(object sender, EventArgs e)
// For some reason, after specifying that the password entry box's textmode to 'Password' setting,
// the UI's password textbox is emptied
this.loginStatusInstructionTextBox.Text = "NOTICE:\nThis application is still under development.\n\n" +
"This is why the password you entered is visible. Once this portion of the application is ready, it will be masked.\n\n" +
"Also, still need to figure out why when changing this to Password entry mode to mask its entered data, password is getting reset.";
protected void loginSubmitButton_Click(object sender, EventArgs e)
this.loginLoadCycles = 0;
this.uName = this.loginUserNameTextBox.Text;
this.pWord = this.loginPasswordTextBox.Text;
if (this.loginUAradioButton.Checked == true && this.loginAFradioButton.Checked == false)
this.loginLADPauthenticate('U'); // authenticate UPS Associates against UPS Corp's Active Directory
else if (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == true)
this.loginLADPauthenticate('A'); // authenticate Area Franchisees against UPS Store's iNet Active Directory
else
// set colors to show that this is an error instead of a status message or instruction
this.loginStatusInstructionTextBox.Text = "ERROR: Cannot log in without specifying if you are an UPS Associate or an Area Franchisee!";
protected void loginCancelButton_Click(object sender, EventArgs e)
this.loginStatusInstructionTextBox.Text = "You have selected to cancel from logging in...";
// Still need to plan what to do when user cancels out of logging in. For now, just initialize class attributes
this.loginInit();
protected void loginUAradioButton_CheckedChanged(object sender, EventArgs e)
String msg = String.Empty;
if (this.loginUAradioButton.Checked == true)
this.loginAFradioButton.Checked = false;
msg = "Thanks for specifying that you are a TUPSS Associate. ";
if (this.loginUserNameTextBox.Text == String.Empty)
msg += "Now please specify your username.";
else if (this.loginPasswordTextBox.Text == String.Empty)
msg += "Now please enter your password.";
this.loginStatusInstructionTextBox.Text = msg;
protected void loginAFradioButton_CheckedChanged(object sender, EventArgs e)
String msg = String.Empty;
if (this.loginAFradioButton.Checked == true)
this.loginUAradioButton.Checked = false;
msg = "Thanks for specifying that you are an Area Franchisee. ";
if (this.loginUserNameTextBox.Text == String.Empty)
msg += "Now please specify your username.";
else if (this.loginPasswordTextBox.Text == String.Empty)
msg += "Now please enter your password.";
this.loginStatusInstructionTextBox.Text = msg;
private void loginLADPauthenticate(char whichActiveDirectory)
String msg = "Authenticating user '" + this.uName + "' with password '" + this.pWord + "' against ";
if (whichActiveDirectory == 'U')
msg += "UPS Corp's Active Directory...";
else if (whichActiveDirectory == 'A')
msg += "The UPS Store's Franchisee Active Directory...";
msg += "\n\nNOTICE:\nThis is still under development.\n\nAt this point, this application is supposed to do something else now but is not yet ready.";
this.loginStatusInstructionTextBox.Text = msg;
this.loginStatusInstructionTextBox.AutoPostBack = true;
// Authenticate using LDAP
protected void loginStatusInstructionTextBox_TextChanged(object sender, EventArgs e)
I confirmed that I have System.DirectoryServices.dll located in
C:\Windows\Microsoft.NET\assembly\GAC_MSIL\v4.0_4.0.0.0__b03f5f7f11d50a3a\ folder and that I as well as System have read as well as read&execute privileges
not only to all folders in its path but also to the DLL file itself.
I would appreciate any help in trying to resolve this compilation error so that I can proceed with implementing LDAP features for this endeavor.
Thanks so much,
hguico @ The UPS Store

Hi,
For web application problem, please post your thread in
ASP.NET forum.
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

The type or namespace name 'Workflow' does not exist in the namespace 'Microsoft.Office' (are you missing an assembly reference

Hi Folks,
I created SharePoint reusable deigner work flow which has just 2 state approval process.
I generated the wsp file with save template option and I successfully imported it into visual studio 2010 I just removed List from the tag and put my custom content type id
<Association Categories>List<Association Categories>
when I build the solution I got erro which mention in the title.
Thanks in advance.....

Hi Shivaprasad,
Check .net version in your project properties, If it isset to .net 2.0, change it to .net version to 3.0 and it should work.
Let me know if it works or not..
Nilesh

The type or namespace name 'Microsoft' does not exist in the namespace 'System'

I got the reference error while building the code.
I have added the system and microsoft.sharepoint reference error. But still showing the same error.
Need help!

Hi
According to the error message, please check that whether the target version of the .NET Framework of your application has been changed.
Please do as follows:
1. Make sure your project is target on .NET 3.5 .
2. Add
the namespace in your code.(using Microsoft.Office.InfoPath)
More information about
Troubleshooting .NET Framework Targeting Errors:
http://msdn.microsoft.com/en-us/library/vstudio/cc668079(v=vs.100).aspx
A sample about
Creating a Basic Form Template with Code for your reference:
http://msdn.microsoft.com/en-us/library/aa942693(v=office.14).aspx
Feel free to reply with the test result if the issue still exists.
Best regards
Patrick Liang
TechNet Community Support

The type or namespace name 'Reporting' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)

I have a Windows app that was built some 7 years ago on a WinXP machine using VS2005. It uses Crystal Reports for the reporting. We recently got new machines with Win7 x64 and I installed VS 2013 Pro. I moved the app to my machine and upgraded
it to that VS version. It previously had a .NET Framework target of version 2.0. I changed the target to version 4.5.
I want to use the MS Reporting instead of Crystal Reports. However, I cannot get the ReportViewer control to show up in the Toolbox.
I downloaded and installed the ReportViewer Runtime 2012. I installed the ReportViewer using the NuGen GUI and console. I tried adding the control to the Toolbox using Tools > Choose Toolbox Items... but it never shows up after I browse to
the Microsoft.ReportViewer.WinForms.dll file and select it. I manually typed 'Microsoft.Reporting.WinForms.ReportViewer' and the intellisense came up fine. But when I build the project I get the error shown in this post's title.
I'm at a complete loss. I've searched all over and tried everything I can find on the subject with no luck.
Can anybody help?
Thanks.

Thank you for taking the time.
The Report Viewer will not appear on the Toolbox, even with references to that assembly. However the Crystal Reports viewer IS in the Toolbox.
I think it may be because Crystal Reports is installed and integrated? I don't know. I just can't get it to work.
Thanks again.
Hello,
From
ReportViewer Controls (Visual Studio), we could get that ReportViewer Controls are included in VS2013, that means we don't need to install that control manually.
To confirm whether this issue is related to your Visual Studio or Crystal Reports, I would recommend you consider testing it with the following ways.
1. Create a simple windows form application, and open a form designer window, and check whether reportviewer is inside the tool box.
If it is available, then we could focus on your project to narrow down this issue.
If it is still missing, we could test it with #2.
2. Uninstall Crystal Reports and disable all add-ins of VS2013, and if possible, you could also uninstall and reinstall VS2013 to make sure the environment is clean enough. Next repeat the steps of #1.
It will be much helpful if you could share the detailed results with us.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The type or namespace name 'SharePoint' does not exist in the namespace 'Microsoft' (are you missing an assembly reference?)_

Hi,
am trying to use simple client object model using console application and have Included the required assembly
microsoft.sharepoint.client
microsoft.sharepoint.client.runtime
and added using directive microsoft.sharepoint.client
then also am getting the error plese help me
thanx in advance

Hi,
From the properties of the project solution, change the platform target to x64, and the target framework to .NET Framework 3.5.
Let me know if you have any doubt.

Cost center not checked during the inbound idoc FIDCCP2

Hi all,
Could you please give any input on this strange issue.
I am testing inbound Idoc FIDCCP2 (GLVOR = 'HRP1' ) with tcode WE19 and when I fill cost center with value 'ZZZZZ' the system post the FI document and deosn't check the cost center like in FB01.
With FB01 I have a error message "Coste center 'ZZZZ 'does not exist on 21.08.2014" and cannot post the document.
Thanks.
Farouk.

Try OSS note 114814.
Regards
Waza

Enter a valid basic type - BW IDoc type RSSEND is not same as the SS IDOC

Similar Messages

Maybe you are looking for