Cost center not checked during the inbound idoc FIDCCP2

Hi all,
Could you please give any input on this strange issue.
I am testing inbound Idoc FIDCCP2 (GLVOR = 'HRP1' ) with tcode WE19 and when I fill cost center with value 'ZZZZZ' the system post the FI document and deosn't check the cost center like in FB01.
With FB01 I have a error message "Coste center 'ZZZZ 'does not exist on 21.08.2014" and cannot post the document.
Thanks.
Farouk.

Try OSS note 114814.
Regards
Waza

Similar Messages

Message type is not populating in the Inbound idoc control record

Hi,
I have created an Inbound Idoc function module and have done the necessary Idoc settings. But, while testing in WE19, I observed that control record is not getting populated with message type and it is dumping.
The settings which I have done in WEDI as follows:
1. Created Idoc segments with necessary fields and released
2. Created Idoc type for the segment type
3. Created message type
4. Assigned message type to basic type
5. In the inbound processing settings,
filled the ALE attributes with the Idoc function module name and input value '0'
6. Assigned FM to basic type and message type
7. Created process code and assigned the process code to message type
Please let me know, the reason for the message type not populating in the control record. Useful answers will be surely rewarded.
Best Regards,
Mallika

Hi,
Maintain partner profile (Transaction code WE20) for the message type you defined in WE81 and put your process code in partner profile and check your logical system settings also in transaction SALE.
Thanks
Rahul

Cost Center not flowing in the GL view

Hi Friends,
The users have made the entries in the system and defined the Cost centers in the respective fields, while posting the documents. However, when we run the GL Report thru FAGLL03, we notice that the Cost Centers do not get displayed in the Report. On further checking the documents posted we find that the cost centers are maintained in the 'Entry View' but these do not flow to the GL view. This is resulting in the values not getting picked up in the Report Painter Form which is based on the table FAGLFLEXT. How can we chek and waht needs to be done on the config side to enable the values to be flown in the GL view as well and get maintained in the table FAGLFLEXT.
Thanks for the Help.
Regards

Hi Nikhitha,
As advised by Guarav earlier, the cost center scenario has been maintained and in the GL Cost center field has also been included. But still the cost center is not displayed in the GL view.
Is there anything else to be checked in this case.
Regards,

Cost center budget checking during purchase request creation

Hi experts,
My user want to able budget cheking when creating PR or when release the PR using PR release strategy.
Is there any tool or which setting I have done for it ?
Thanks

The Funds Management of FI need to be activated. The budget is allocated against each GL account . When ever the commitment is created (for example Purchase requisition, Purchase order) , the budget is allocated . When ever the budget is consumed , we can customize the message(Error,Warning) based on the business requirement....
When ever PR or PO is created , then it will be subjected to release. In case we want to use SAP std functionality , the budget can be checked at the creation stage of PR or PO , and not at the release stage.
Regards
Mani

Cost center not visible in PR05

Dear All,
I have a situation. This employee was transferred from one company code to another with new cost center. When he was in the previous company code, he has created an expense report and saved but NOT submitted. Now the cost center is not visible in the PR05 screen, however in simulation it is showing the correct cost center (previous cost center). Kindly let me know why this cost center is blank, as per the SAP standards, it should show the cost center which is active during that period of time when he creates the trip.
Regards,
LNB

Hi,
In PR05 the cost center at line item will not show if the default cost center from the employee master data is taken. You can check at the table level which cost center is taken for the trip level. The table is PTRV_SCOS. It is not very clear what is the issue you are facing. Pls provide more details like screen shot OR some more description.
Regards,
Vijay

Segment E1IDBW1 is missing for the inbound idoc type PAYEXT

Hello,
the above segment is missing in the inbound idoc - basic type pexr2002.
I have checked in TC-we30 and its available there.
but still the idoc is getting generated without this segment.
can someone suggest.
thanks
Arun

Hi All,
I have a similar query to that of Penny. We are able to get the standard IDOC to generate with segment E1IDBW1. It contains the standard fields INPWEEMP, INPWTXT1, INPWTXT2. However, we have a requirement to manipulate the standard contents of these fields. We wanted to use user exit EXIT_SAPLIEDP_002 to do this.
I have maintained user exit EXIT_SAPLIEDP_002 but when we enter this on creation of the IDOC the segment E1IDBW1 does not seem to be available in table EDIDD_TABLE for manipulation. Can you advise please if (1) you were able to get E1IDBW1 available to edit in exit EXIT_SAPLIEDP_002 and (2) were you able to manipulate the contents of INPWTXT1, INPWTXT2 etc?
We have done the following steps:
- BTE 2441 is available on our release
- house bank has been setup as an In House Cash Center which allows E1IDBW1 to be generated
- entry has been maintained in table FEDICUS with Message Type = PAYEXT, BasicType = PEXR2002, Extension = Blank, Seg Type = E1IDBW1
- code maintained in ZXF08U04
The system enters ZXF08U04 but E1IDBW1 is not available there for manipulation.
Can you advise what we might be missing please?
Thanks and regards
Mike

How to get the inbound idoc for the newly created inbound Idoc FM

Hi,
I have created a new function module to process the Inbound idoc. I need to have a idoc to check my function module, whether it is working fine or not. How I can get the data. Do I need to have the idoc from the partner ? Please help me ASAP.
Thanks,
sreenivas.

Hi Sreenivas,
Go to WE19 and get any of the your present idoc with the idoc type
then go to BD20...execute the same idoc...and there you can create the IDoc, and process the same with the Inbound function module tab..( give the FM you are using as the process code.)
from there you can do the debugging aswell of that FM
Thanks

KI222 - Inappropriate Cost Center Not Valid Error Message

Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0). I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009. (where aaaa = the appropriate controlling area and ccccc = the cost center). Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999). The cost center is valid on the posting and entry date I'm passing in the BAPI header.
Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI. Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
Thanks,
Randy

Hello,
Go to OKKS and set your controlling are correct.
Then go to KS03
See the from validity. If there from date is in past then there should not be any issue.
Make sure that your entry is using current date not old dates in the data using BAPI
You can switch off the message for the time being.
Go to OBA5 and application area KI and message number 222.
Switch off the message for online and batch entries.
This is only for temporary purpose till you pass on your BAPI. But this is not suggest to do it in production system, as this is deviating from standard functionality.
If the message is not available in OBA5, first go to OBMSG transaction code add the message there to the application area (tick switch off message check box) and then come to OBA5 to switch off the message.
Regards,
Ravi

Error KI222 - Cost Center Not Valid for Date

Iu2019m having a problem goods issuing material to a cost center (movement type 201) via a call of the BAPI_GOODSMVT_CREATE BAPI (ECC 6.0). I can post a specific material / plant / storage location / cost center combination without issue via MB1A but when attempting to call the BAPI processing the exact same data, I get the error message KI222: Cost center aaaa/ccccc does not exist on 05/14/2009. (where aaaa = the appropriate controlling area and ccccc = the cost center). Iu2019ve checked the validity dates on the cost center via KS03 and all looks fine (the cost center is valid until 12/31/9999). The cost center is valid on the posting and entry date I'm passing in the BAPI header.
Any ideas what I may be doing wrong or if thereu2019s some field Iu2019m not appropriately selecting / flagging in the BAPI. Iu2019m using the BAPI successfully for several other movement types (701, 702, 551, 552).
Thanks,
Randy

are you sure that the posting and document dates you submit with the BAPI are correct?

Cost Center not appearing in FAGLL03

Dear Forum,
We have come accross a peculiar situation. The GL Document is posted using the Non-Statistical Order as well as Cost Center. However, when we veiw the Expense GL Account using the T Code FAGLL03, we cannot see the Cost Center, but can view the Profit Center. But when we view the Exepnse GL Account using the T Code FBL3N we can see the Cost Center. What could be the reason for this? Is it becuase of the use of internal Order in the document? This abnormal behaviour is being observed only in case of document with Internal Order and not in case of other documents posted with Cost Centers but without Internal Orders. What do we need to check to understand this behaviour?
Would appreciate your help in this regard.
Regards

Check the below thread:-
[Re: Cost center missing in FAGLFLEXT;
Regards,
Gaurav

User Exit for Cost Center authority check in reservation & service entry sh

Hi,
We want to have cost center authority check in reservation & SES. Whcih exit should we use for this purpose.
BTW, we tried the same in SES via the user exit SRVREL componet EXIT_SAPLEBND_003 for Change to Comm. Structure for Release Strategy Determination in the include ZXMLUU10 . Since then the Release strategy for SES is not effecting . Even after blocking the entire code by commenting it, the strategy is not effective. We are able to accept the SES using the Flag Button but without any strategy. How to revive the release strategy.
Thanks & regards,
KT Varkey

Hi Ramki,
Thanks for the advice. The problem is solved except that for Cost Centre authority check for SES. Tried SRVESLL but it doesn't work. Any other exit or any specific advice to make SRVESLL work for KOSTL check.
Best regards,
KT Varkey

Infotype Header Data - Cost center- System to read the latest data

Dear Group Members,
I am modifying Infotype Header data and calling Cost center (Field - KOSTL) in header data via modifying header data in table T588J. The cost center values appears on the header data (As stored in Infotype 0001) however it appears with the oldest data. i.e. if the employee cost center had been changed after his joining system does not picked up the Latest data/ Latest cost center value.
Any one on how to resolve this issue with SAP Standard functionality.
Regards
VISHAL SAXENA
SAP Specialist - HCM

Hi,
The answer to your question lies in table V_582A_B. You can either access it through SM30 or by following IMG path:
SPRO>Personnel Management>Personnel Administration>Customizing User Interfaces>Change Screen Header>Header structure per infotype
There is a u201Cchoose datau201D indicator for each infotype. If that is checked, the header displays data as per the start date of infotype displayed; otherwise, it shows data valid as of system date. Please bring up SAP help on the field by F1 for more information.
Also check table T588H (data selection field) as it has some dependencies for the above mentioned settings. The table can be brought up from:
SPRO>Personnel Management>Personnel Administration>Customizing User Interfaces>Change Screen Header> Infotype header data selection control
Hope this helps.
Donnie

Cost component not splitting at the time of Rune the tine of Cost Estimate

http//
Hi,
We are in developing phase for Product costing for coal mine project ,
we have raise coal material with Non component BOM , and Routing is only one activity with 400- Raised Coal Qty-MT ,
We upload the plan with Production cost center -activity type and cost element ( as per cost component -we have 10 cost component as per below )
RM - Blasting
Production Overhead
Power - Main
Stores,Spare,Consum
Repairs & Maint
Lease & Hire Char-PM
Power - Auxiliary
Depreciation
Over Burden
Development
we done the plan for Amount and Qty by KP06,KP26 and update plan price but system not calculate the cost component splitting in cost estimate as per planning while only one item showing for all cost to Production Overhead cost component
Production Overhead cost component which assign the secondary cost element which is assign to activity type 400
can any one help me to how we can resolve this issue
Please find attached document

Hi,
Here I am providing the necessity and importance of splitting structure, will share the configuration steps once you go through the following and get the comfort level.
                  Expense Analysis and Splitting in Manufacturing Cost Centers
Introduction In SAP Cost center work as a cost responsibility center, where all the expenses and cost are stored and analyzed for the purpose of management decision making.
The cost could be fixed or variable in nature. The difference between variable and fixed costs can be made in various ways in product costing in CO module.
Fixed costs represent the static costs incurred by the organization, which doesn’t change on the basis on manufacturing activities, which remain constant irrespective of production activities like rent for the premises, salaries of office staff etc.
On the other hand, variable cost varies based on the level of production activities; if production activities increase then variable cost also increased like electricity consumes raw material charges etc.
However all the variable cost doesn’t vary in direct proportion by quantity of goods produced.
In this document will try to define; how the Expenses analysis and splitting of cost done in manufacturing cost centers.
From controlling prospective, fixed cost remain constant regardless of operating activities, but if these factor changes, variable cost will fluctuate.
Basically raw material costs represent variable cost, but in this document main focused will be given to distinguish fixed and variable activity cost.
The segregation between fixed and variable cost is optional and is derived from the configuration and master data configured in cost center accounting and overhead accounting.
Activity Price:
There are different methods that could be used in cost center accounting to determine the activity price. The simple way is the manually enter “Fixed” and “Variable” Activity cost (KP26).
However there are other methods used in Cost center Planning and Budgeting that automatically calculate the fixed and variable activity price.
Here the focused will be given on Planning and Budgeting activity and automatic calculation of plan activity rate in cost center.
This method aggregate planned costs by cost element and capacity by plan unit to calculate the activity price.
Activity independent costs are segregated among different activities based on Splitting Structure, while activity dependent cost directly used for the purpose of variable activity rate calculation.
Fixed Activity Cost:
In product costing all those cost, which doesn’t vary based on the activities in manufacturing cost will represent fixed cost.
In a manufacturing cost centers there may be two or more activities performed.
To calculate the activities rate, the fixed costs are distributed to various activities on the basis of Splitting Structure defined for cost center.
Variable Activity Cost:
Variable activity cost, which directly depend upon the activity type and fluctuate based on increase or decrease in manufacturing activities. In SAP variable activity cost are directly linked to the respective activity.
Activity Prices: Fixed and Variable Split
In Cost Center Accounting dividing the cost between Fixed and Variable requires appropriate split to be made in the cost entered for the activity. The process is described below:
i. Variable cost would be planned at activity level and expenses should be maintained at cost element in the manufacturing cost center by assigning activity and cost element combination.
In other word, the expenses should be planned on Activity type at the time of primary cost planning (KP06).
Then the variable activity rates are calculated on Total cost planned at Activity divided by Total number of activity planned at that cost center (i.e. capacity in KP26)
ii. Fixed cost would be planned at independent of activity type. These costs are maintained in KP06 at cost element level on manufacturing cost center.
Then the fixed costs are distributed on various activity types on the basis of Splitting structure defined at OKEW.
In Splitting Structure we define the rules, how the fixed cost will be distributed to Activities. For the purpose of this document, considering split of fixed cost on the basis of Capacity maintained in KP26.
Regards,
Pavan kumar Arvapally

KO88 - Error when settling for Cost Center AND Auc for the same Internal Or

Hi Experts,
We need to configure Investment Internal Orders that could settle to both Cost Center and Auc, but each assignments with different Source Cost Elements
We did the following:
1. Created Auc Class
2. Created Investment Profile "IMOBIL" and assigned to Auc Class, flagging Auc
3. Created Allocation Structure "CV" with two assignments:
01, Source = Cost elements 7000000000 to 7999999999, receiver AUC "by cost element"
02 Source = Cost elements 4000000000 to 4999999999, receiver CTR "by cost element"
4. Created Model Order, filling the Investment Profile IMOBIL created in step 2.
5 Created Settlement Profile ZCV0001, assigning Allocation Strucutre CV, allowing CTR and AUC for receivers, default receiver is "FXA", doc type "AA".
6 Created ORder Type CV01, assigning Settlement Profile ZCV0001.
When I post only for Asset Expenses (Source Cost element 7, Assigment 01), the settlement through KO88 correctly settles to AUC, and also creates the settlement rule for cost center (i'm using the strategy to create from Responsible Cost Center).
But when I post for Asset Expenses (cost elements 7, receiver AUC) AND General Expenses (Source Cost element 4, receiver CTR), KO88 generates an error KD506, saying that for Assigment 02 - AUC I didnt define a settlement cost element.
1. Assignment 02 is not AUC, is CTR;
2. I flagged "by cost element", so I don't need a settlement cost element. And also, I was able to post to AUC when the source posting was only for cost element 7.
Did you face any problem like this?
I cannot find out what is the missing configuration, or if it is a program error...
Kind Regards
Mayumi Blak

Hi Ajay
I already created Source Structure and assigned to my Setllement profile (so I assigned Allocation Structure AND Source Structure).
I don't understand when you say that I need to assign the Source Sutrcture in each rule....because the Source structure is in the Settlement Parameters valid for both rules...
When I post to Asset Expenses only for the internal Order, the 2 rules (CTR and AUC) are created when I run KO88 (but only AUC rule is settled). This is OK.
The problem is when I post for both General Expenses AND Asset Expenses, the system is not recognizing that I have 2 source structures, neither is findind that for CTR AND AUC the Settlement cost elements are the original cost elements.
I'm thinking about changing message KD506 to warning, do you know if this can help?
Kind Regards
Mayumi Blak

Creating Delivery based on the Inbound IDOC received.

Hi all,
I have a requirement where in, Outbound Delivery for Sales order is to be created based on the inbound IDOC received from a third party. The standard idoc type DELIVERY03, requires the Delivery Number for updating the order but it cannot create a delivery number.
Can any one suggest which IDOC type can be used for this or if there is any alternative solution?

Hi,
You can use FM IDOC_INBOUND_WRITE_TO_DB to create an inbound IDoc.
CALL FUNCTION 'IDOC_INBOUND_WRITE_TO_DB'
    EXPORTING
      PI_STATUS_MESSAGE       = I_EDIDS
    IMPORTING
      PE_IDOC_NUMBER          = DOCNUM
      PE_STATE_OF_PROCESSING = STPROC
      PE_INBOUND_PROCESS_DATA = I_TEDE2
    TABLES
      T_DATA_RECORDS          = I_EDIDD
    CHANGING
      PC_CONTROL_RECORD       = I_EDIDC
    EXCEPTIONS
      IDOC_NOT_SAVED          = 1
      OTHERS                  = 2.
Check the following link:
http://www.sapbrain.com/TUTORIALS/TECHNICAL/IDOC_tutorial.html
<b>Reward points</b>
Regards

Cost center not checked during the inbound idoc FIDCCP2

Similar Messages

Maybe you are looking for