Enter button won't work at all on Surface tablet.

Exactly what the title says. I can receive messages but not send them.

Try a Reset: Hold the Sleep/Wake and Home buttons until the screen goes dark and the Apple logo appears
If there is still a problem:
1.Verify that airplane mode is off by tapping Settings > Airplane Mode.
2.Reset the network settings by tapping Settings > General > Reset > Reset Network Settings.  Note: This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings
3.Ensure that your device is using the latest software. To do so, connect your device to your computer and check for updates in iTunes.
4.If your issue is still unresolved, perform a software restore in iTunes.

Similar Messages

Help, my home button won't work at all!!!

Hi,
my home button won't work at all, and when I tried to restart the phone, the message appears that this action won't work unless the phone is on the airplane mode. Can't really read the whole message cause it disappears after a second or so.
I put the phone on the charger and the USB connection also failed.
What happened?

It sounds like it's broken. Assuming you haven't jailbreaked or otherwise hacked it you should try a Restore or a Recovery. If you put it in the cradle and you can't restore it see: http://docs.info.apple.com/article.html?artnum=305797 for Recovery mode.
If this doesn't work call Apple or take it to an Apple store; it probably needs to be replaced.
If it HAS been hacked go to the source of your hacking tools for help; we aren't allowed to discuss it here.

Enter button doesn't work at all help!

The enter key on my Macbook Air does not work at all anymore. I did not do anything differently and nothing happened to it - no spill, did not drop the laptop - nada. I have reset everything to defaults, open the key and clean under it. I am really hoping that it is not a hardware problem - but to ensure that it isnt I need to wear out ALL possible software problem. ANY SUGGESTIONS? please and thank you.

Welcome to the Apple Discussions. Since the Font Book application crashes try deleting its preference file, com.apple.FontBook.plist from your User/Library/Preferences folder. Then try again.
OT

Why is my iPhone 5c's home button not working at all it didn't work once for a few minutes then it was normal again now it won't work at all. HELP

Why is my iPhone 5c's home button not working at all it didn't work once for a few minutes then it was normal again now it won't work at all. HELP

The screen repair was botched. Take iPhone back to place of screen repair, and have them get the home button working again.

My home button won't work

My husband's I-pad has been playing up! His home button won't work, and this keeps happening.

Try a reset ...
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Beyond that, restore the iPad > iTunes: Restoring iOS software

I just installed iOS 6.1.5 and now my power button won't work

After installing iOS 6.1.5 and reinstalling the apps that it deleted from my computer my power button won't work on my iPod touch 4th gen. Any suggestions?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

My buttons won't work on my phone!

My buttons on my phone won't work at all. ANY of them. I have taken the battery out and put it back in several times and still nothing works. I didn't drop it, there was no water in it. It seriously just stopped working. And people call me and send text messages, I can't answer them. But the phone will turn on when i put the battery back in. What do I do?
I also tried leaving it off for a while, left it synched with the computer and charging. Any ideas before I have a fit with verizon?

can you restore a backup with the desktop manager ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Power button and voice control buttons won't work on my macbook pro retina

I found that my power and voice control buttons won't work on my new Macbook pro retina. I can't shut it down or restart it in any way. And Im afraid if I force to shut it down I can't turn on it cuz the power button won't work. What should I do? Any idea???

Please read this whole message before doing anything.
Back up all data.
Quit Facetime and Messages if either is running.
Step 1
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following item from the Library folder to the Trash (either may not exist):
Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
Leave the Library folder open. Log out and log back in. Try the applications again. If they work now, stop here. Close the Library folder.
Step 2
If you still have problems, quit again. In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
com.apple.imdsmsrecordstore
com.apple.imservice
Move them all to the Trash. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash too.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Log out and log back in. Test again.

2 buttons won't work that were created exactly like a many others that work.

I am using Flash CS4 with actionscript 2 to create an interacitve portfolio. I have 2 text buttons that work when I test them with "enable simple buttons." When I publish to IE these buttons won't work. I have created over 50 buttons using the same methods, they all work. Any idea what might be wrong?

I have attached an edited version which shows working buttons and the ones we are having trouble with.
If you publish this in IE, the only button that will work is the last one on the entry page ("Writing"). This is because I have deleted all the other info to reduce the file size
On the next page the "Blog Excerpts" and "English Notebook" links are the ones that have been configured but do not work. The "Home" page on top does work. As you can see, the buttons have all been created the same way.
Thanks for being willing to help work this out.
Mark

My iPod Nano, 4th gerenration buttons won't work anymore, but I can still shake iPod to get song to shuffle... any help?

My iPod Nano, 4th gerenration buttons won't work anymore, but I can still shake iPod to get song to shuffle... any help?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
iOS: How to back up your data and set up as a new device
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My sleep/wake button will not work at all. What to do?

I have and Ipad 2 and I never had a problem with anything until today when early the wake/sleep button will not do any it won't work at all. Please help!!!
-Thanks

and also my phone is disabled on top of that with a red screen!

Hello I went to wipe my 1st generation iPad and then tried to update the iOS now the iPad won't work at all any ideas what I can do?

Hello I went to wipe my 1st generation iPad and then tried to update the iOS now the iPad won't work at all any ideas what I can do?

You can't update the original iPad beyond iOS 5.1.1 so if you were already running that version, there was no reason to wipe the iPad to try to update.
Won't work at all, doesn't tell me the whole story. Does it power up but not respond to anything? Does it not power up at all? Some detailed information in context would really be helpful.
IF the device will not start up, try a reset. Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple Logo appears on the screen.

After installing Maverick my computer, when restarted, only a gray screen appeared. My computer won't work at all...what happened?

After installing Maverick my computer shut down and when it restarted I couldn't get to the home screen. The monitor was grey with some dark grey shapes, it sounded like it was constantly running a program. My computer is sick!! HELP

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

Qosmio x300-130 - ctrl-buttons won't work anymore

Hello everyone
Im having some problems with my ctrl-buttons. They simply won't work anymore, they used to but slowly they became unstable and now they won't work at all.
So now I ask you if there is any way to solve this problem without sending the computer to repairs.
My computer is a Qosmio x300-130 and I have had it for about two months.

Hello
It is really strange issue with those CTRL buttons functionality. Googling around I found several forums where people report about this. Unfortunately nobody has explanation why this happen.
I use Vista and WXP SP3 on my Satellite Pro P300 and until now everything works properly.
I can just imagine some Microsoft update is responsible for this. Try to roll back OS to earlier time using system restore tool.
Please post results.
Lets see if someone else has other advice.

Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

Computer is balky random freezes across apps. Two hard drive cleans later (their scan reveals no hard drive problems) photo shop won't work at all, magic touch mouse inoperable and their diagnoses is corrupted data? Anybody heard of this?

Well, yes, data does get corrupted sometimes.
The trick is finding what data.
By 'cleaned' are you therefor meaning that the drive has been erased and the system re-installed?
Because that's the quickest way to deal with such a situation.
Back up the system first of course,
Add back 3rd party apps one at a time in case one of them is causing the problem.

Enter button won't work at all on Surface tablet.

Similar Messages

Maybe you are looking for