Entering a component name in column New Name causes ecxeption

Hi peoples,
It's not the first time i encounter this problem.
I select a basic action in the Test Case Editor. Then i select it and try to enter a component name in the column 'New Name'. After entering the first tokens suddenly an error message pops op with this text:
3004: Unexpected error occurred.
org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.IllegalArgumentException: Comparison method violates its general contract!)
Closing the test case, open it again and try again to select the basic action and enter a component name leads again to this error message. I probably will have to restart Jubula.
I am using Jubula_8.1.00294
I will attach a file with the whole error message, a screenshot and a log file.
Hope you can tell me if something can be done to prevent this. It is pretty annoying.
many thanks in advance,
Jurjen

Hi Jurjen,
Thanks for mentioning this. Would you be so kind as to enter a ticket in the Jubula bugzilla with the information you've mentioned here as well as:
- what platform you are working on
- whether you can say anything about the reproducibility of it
Best regards,
Alex

Similar Messages

In order to download the new iTunes update I have to enter my administrator name and password. When I enter the correct name password it won't put me through. How do I fix this?

In order to download the new iTunes update I have to enter my administrator name and password. I am having trouble.

Hi johnsherrard,
If your iPhone is currently disabled due to a password issue, you may find the following article helpful:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
Regards,
- Brenden

BP Fact sheet: how to translate component name?

Hello
At my customer BP fact sheet is custimized to include a custom component. The component name is Z-custom and the description in english is "custom". If I log on to the web UI in english I can see the title on the windo "custom". But if I log on in other languages it is empty.
This is because there was no translation to the component name before. I added the translations in SPRO - Maintain Fact Sheet but still nothing is shown in the web UI. I also checked BSP_WD_CMPWB but found no place for translation.
Can anyone help? It must be something really quick ans stupid !!
Sotiris
Edited by: Sotiris Hatzis on Jul 6, 2011 12:26 PM

Actually I also made some other changes in transaction BSP_WD_CMPWB (like titles of columns) but these changes are not shown either onthe Web UI.
Do I need to activate something, or run something?
Sotiris

Where do I enter PPP user name and PPP password?

Where do I enter PPP User Name and PPP Password when installing a new modem? I followed directions for installation but a dialog box asking for those items didn't come up.
I reset the Wi-Fi on the System Preference > Network Pane after turning off all my wireless devices, MBP, iPad, iPhone, Canon MG5320 printer/scanner, and HP LaserJet Professional P2606N (this printer is connected via ethernet to AirPort Extreme).
I did this because of the following message:
Another device on the network is using your computer’s IP address (192.168.0.1)
Following directions I unplugged the PK5001Z Modem, plugged it back on, and then turned on each wireless device, one at a time so that unique IP addresses would be created for each one. This worked, but now I'm trying to get our Smart HD Samsung TV to connect to the internet.
Setting up the IP Internet settings, we are using the Network Name and entering its IP address manually and also having the setup find the IP address automatically. It connected to the modem but couldn't complete the connection to the internet.. Also use a Guest Network, but that didn't work either.
Is the PPP User Name and PPP Password still necessary? It was given to me by our service provider and was original in 2012.
Bonnie

I found the Modem GUI Logo setup on the web for my modem using the address of my IP address with http://xxxxxxxxx.
Everything looks good.
The internet connection with the TV is still a problem.

Pass Component Name to Generic "Condition" w/o hardcoding it

Hi, thanks in advance for your help.
I'd like to create a generic PL/SQL "Condition" statement which references the Component Name of the component executing the Condition - without hardcoding the component name in the query. In other words, a statement which I could plug in to any component's Condition clause without hardcoding the name for each component. Is there a Substitution String, application variable or some other mechanism I can grab which has this value?
What say ye Oracle... Can I get there from here?

I'm not sure it does require an enhancement request, since I'm pretty sure you could code that using authorizations right now.
For example, assuming that you have different levels of users (e.g. level 1, level 2, level 3 etc), where -
Level 3 is the lowest level
Level 2 can do everything level 3 can do, plus a bit more
Level 1 can do everything level 2 can do, plus a bit more
Then you could define a table mapping users to levels (e.g. "Joe" is level 2).
Then in your Application you create authorization levels for Level 1, Level 2, Level 3 etc (i.e. you're specifying that a user must be at least Level 2 to see this item etc).
You create a new item and assign it an authorization level of 'Level 2', therefore only users who are Level 2 and above will be able to see the item.
Obviously I've missed out a huge chunk of the implementation here ;)

Error:-Please enter a company name to use within the iTunes Store

Hi ,
I have registered for iOS developer program (99$) one .
Now I am trying to block the app name which i will upload soon . When i go to itunes connect and create a new app and provide all the information needed, I get the error "Please enter a company name to use within the iTunes Store."
Can someone help me out on this ?

I have the same error, but I think we will get no solution for this problem.
You've get no answer here and the Apple support also doesn't send an answer how to solve the problem.
BTW I have also Windows 7 and the newest version of iTunes 64-bit.
Greetings Mike

Trying to enter a screen name

I am being asked to enter a screen name somewhere in photoshop touch but every name I answer is met with the message that the name is unavailable. What gives? I've tried about 20 names, all rejected.

No problem. Photoshop Touch is a lot of fun to play with (I think) and makes a great mobile companion to it's big brother on the desktop. It's surprisingly powerful and I think you'll find there are a lot of features packed in to it. That said, tablet apps are a new thing for many of us, so don't feel bad if you get a little disoriented at first: there's new hardware, new operating systems, new terminology, etc. - we're all learning.
Once you have PS Touch installed on your tablet, the only place (that I know of) where it should prompt you for anything like a name is when you want to connect to the Creative Cloud - that provides a very handy way to move files between the Tablet and your desktop computer, so you'll want to explote that option. When you do, you'll need to "sign in" to the Creative Cloud using an Adobe ID (account) to access the Creative Cloud. If you have trouble with that, feel free to post a question here.
Cheers and have fun.

How to enter a website name in smartform

Hi,
I want to enter a website name in hypertext format. Can anyone tell me how to do this in smartform.
Thanks,
Rose.

Create a text node, then under general attributes tab after delete field option insert url button is available.
Regards

How to find out the Target Component name and Target view name

Hi All Expert,
                  I want to know ,how to find out the target component and target view in WEB UI,when i click on a field which shows as a hyper link in WEB UI .At GUI level ,i know the how it will work.Any way to find out the component name and view name which is show the details of that field at GUI level .IF you go to transaction CRMD_ORDER then open the service contract id .then goto the item level value .there is 1 service data tab is available at item level.there is two button is available.first one is available time and second one is response time .if i click on any button then one popup is open which is shows the details of that button.I dont know how to find out the component name and view name from GUI level.
Thanks in Advance....
Vishwas Sahu

Hi Vishwa,
             The control would be something like this for navigation in Get_p_xxx method u mention as link and u mention a event name which gets triggered on the click of this hyperlink. So your GET_P_XXX method would have the following code:
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = 'EXAMPLE'.
Now you have to create a method as EH_ONEXAMPLE at your IMPL class and within which you would give an outbound plug method. Within the outbound plug the target data would be filled in the collection and window outbound plug would be triggered.
This is a huge topic and i have just mentioned you basic things.
Regards,
Bharathy.

Type '[component name]' in CSS selector '[component name]' must be qualified with a namespace

I've recently upgraded my SDK to allow me encorporate other features such as the Text Layout Framework and such. To avoid issues i've had to make Flash player 10 as required, which is where the problems are occuring in my main project.
We knew the switch would cause some issues, and we now have a lovely batch of 100+ Warnings, that are all along the lines of
Type '[component name]' in CSS selector '[component name]' must be qualified with a namespace
all the warnings are on line locations that have no reference to the component they are talking about.. so i'm kinda stumped on what to do. Anybody else run into this issue before?
cheers

<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
      xmlns:s="library://ns.adobe.com/flex/spark"
      xmlns:mx="library://ns.adobe.com/flex/halo" >
<fx:Style>
@namespace s "library://ns.adobe.com/flex/spark";
@namespace mx "library://ns.adobe.com/flex/halo";
Button
    // The warning
</fx:Style>
<s:Button label="提交" textAlign="center" height="30"/>
</s:Application>
I think you have use flex4.
Please change the code to :
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
      xmlns:s="library://ns.adobe.com/flex/spark"
      xmlns:mx="library://ns.adobe.com/flex/halo" >
<fx:Style>
@namespace s "library://ns.adobe.com/flex/spark";
@namespace mx "library://ns.adobe.com/flex/halo";
s|Button
    // ok. The is style for spark button }
mx|Button
    //ok. The is style for halo button
</fx:Style>
<s:Button label="提交" textAlign="center" height="30"/>
</s:Application>

I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html a

I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html and use another ftp client to upload (to the same server) but this is tedious and making minor changes is painful. Have you encountered this and found a solution?

Hi Susan,
In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
- Abhishek Maurya

How to force user to enter supplier/customer name in captial letters in R12

Dear all,
Could anyone pls advise how to force user to enter supplier/customer name in captial letters in R12? Can I do it using OA framework personalization?
HY

Pl post exact versions of OS and EBS.
The ability to do this exists in forms (professional user interface) using forms personalization, but does not exist in the OAF (self-service) interface, AFAIK. See related MOS Doc 399892.1 (Is It Possible To Restrict Employee Name Entry To All Upper Case in the PUI And SSHR ?) for some details.
Pl confirm by opening an SR with Support.
HTH
Srini

Cannot enter my full name in mail account preferences

iMac 24-inch, Early 2008, OS 10.8.2: When I send email from my icloud email account, some recipients report seeing only my email address in the from line at the top of the email without my real name. I opened Mail preferences and the Full Name: box is greyed out and reads "Your Name" instead of my name under the accounts tab. How can I unlock and access this box to enter my real name? BTW, I went to the iCloud website, logged in, and went to the account prefs under the web based iCloud mail prefs. This box was editable and already showed my name. I deleted it and re-entered my full name. When i returned to the Mail app on my iMac, the Your Name box still reads "Full Name" in grey, un-editable. I tried a test email sent to my husband's email and it still reads just my email address without my name at the top. How do I fix this? Thank you in advance.

Go into your icloud preferences and uncheck mail. Give it a minute or so, then check it out.
I tested that after changing my full name on the website. The name updated in my mail.app, but not until I unchecked/rechecked.

How to get the component name in webdynpro

Hi all,
how can i get the name of the webdynpro component. The component is being displayed in the portal. Now i need the component name for this.Can any one suggest of how to get this.
Regards,
Kalyan Chakravarthi.M

Hi ,
get the object of IF_WD_COMPONENT , by calling the method wd_get_api( ) of wd_component attribute , then call the method GET_COMPONENT_INFO( ) ,it will return the object of IF_WD_RR_COMPONENT in that call the method GET_NAME( ) .
Regards
Yash

Can I verify a field-symbol using its component name?

Hello experts,
I am looping at my field-symbol and I need to know what are its component name.
I need to create an IF or CASE statement checking whether the field-symbol's
component name is equal to that of the value that I declared. I want to do
something like this:
LOOP AT <fs_dyntable> ASSIGNING <wa_dyntable>.
ASSIGN COMPONENT sy-index OF STRUCTURE <wa_dyntable>
        TO <component>.
        IF sy-subrc <> 0.
          EXIT.
        ENDIF.
if component name = '2000'.
    condition...
elseif component name = '1999'.
    condition...
elseif component name = '1998'.
    condition...
endif.
endloop.
Again, thank you guys and take care!

Hi,
I am not clear on your doubt , but you can use field-symbol fields like below:
* if <component>-fld1 = '2000'.
condition...
elseif <component>-fld1 = '1999'.
condition...
elseif <component>-fld1 = '1998'.
condition...
endif.
endloop.
LOOP AT x_table ASSIGNING <wa_table>.
IF <wa_table>-fld1 EQ 100.
-----your code
ENDIF.
ENDLOOP.
Regards
Appana

Entering a component name in column New Name causes ecxeption

Similar Messages

Maybe you are looking for