Entering sales quantity into PA during GL posting

Hello,
We would like to be able to post into the value field of sales quantity (profitability segment) during a manual FI posting - F-02. We currently have a characteristic group set up and that is working fine for characteristics. I set up a value field group for sales quantity using KEVFG and assigned it to record type "B" in KEVG3. I've added sales quantity to our PA transfer structure "FI" with transaction KEI2. I still cannot see sales quantity as an option for entry in my F-02 GL entry screen. What am I missing?
Any advice would be appreciated!
Regards,
Lori

Thank you for your quick response.
I do not see the quantity value field on the profitability segment screen of the F-02 GL posting transaction. All I have on that screen are my characteristics that have been set up with my characteristic group. Can I have a value field group show up on the profitability segment screen as well? I have the value field group created and assigned to record type "B". I'm obviously still missing something.

Similar Messages

How to reverse the Batch number which was enter wrongly during GRN posting

Hi Folk,
How to reverse the Batch number which was enter wrongly during GRN posting .
Please revert.
Thank you.

You can either do a transfer posting and move quantity from this batch to another batch e.g. in MB1B with movement 311, or you cancel the entire material document using MBST transaction and redo your receipt correctly.
Then you can flag the wrong batch for deletion in MSC2N.
The batch itself gets deleted physically with the archiving transaction SARA object MM_SPSTOCK

How to post sales quantity to COPA in sales order settlement?

Hi All,
I am facing one problem while sales order settlement. I am settling sales order to COPA (PSG) and while settlement I am not getting sales quantity in COPA.
Other value fields like Revenue(ERLOS), Cost (VRPRS), Discount etc. are getting posted properly into the COPA.
I have done the configuration in PA transfer structure for above settlement. Please advice if anyother setting is missing.
Thanks & Regards,
Yatin

Thanks for reply,
SD Qty.field 'FKIMG'(Invoiced Quantity) has been assiged to COPA value field 'ABSMG' (Sales quantity) in KE4M.
Valuation strategy is also assiged to SAP standrad qty.field ABSMG(Sales quantity).
I have also assigned value field ABSMG(Sales quantity) in PA transfer structure.
Still I am not able to get the quantity field in sales order settlement to COPA.
Please advice if anyother thing needs to check.
Thanks & Regards,
Yatin

IPhone 4 lost all events entered into iPhone during sync

I have a new iPhone 4. I just setup my iPhone to sync with my calendar in Outlook. I had entered 5 events into the iPhone and none of them were in my Outlook calendar after sync and they had been wiped out on my iPhone. The events I entered into my Outlook DID show up on my iPhone. Strange. Am I missing something? This is NOT an Exchange account.

Hi,
A few days ago my iP4 locked up. I did a hard reboot ("home" and "power" buttons). When the phone came back, all of my contacts had gone; however, it them re-synched over WiFi so I have all the details back on my phone... BUT... all of the contact photos have been messed around, so now I have the wrong faces on all of my iP4 contacts (but they are correct on my win7 laptop which I sync from).
Anybody else seen this?
If so, any resolutions to re-sync?
./ukaawe

Can We enter Sales Invoice and Incoming Payment VIA SDK

Dear Experts
We have to develop an integration bridge with retrieve data from excel sheet and upload in SAP , i want to clear is it possible to enter sales invoices and incoming payment via SDK?. If it is possible please guide me about objects name and any reading material for SDK development.
Thanks

Hello,
Yes it is possible with 2 steps:
1. you post the invoice
2. you post the payment
I have already posted into the forum several examples, you may check them:
For invoice + payment
for payment only:
Regards
János

Problems during GL posting in profit center

Hi experts
Here I m facing a problem while doing revenue posting thru F-02,(I created a primary cost element with 11 ) when I entering profit center in field during document entries,a massege comming that"Enter a true account assignment object with revenues"
Message no. KI166
Diagnosis
You made an account assignment for 30001, a revenue element, in controlling area B001 to a cost center or profit center.
System Response
Cost centers and profit centers can carry revenues in the R/3 System as statistics only. To ensure reconciliation between FI and CO for revenue element 30001, a CO account assignment object must record the revenues as a real value. This object type is used for updating to the reconciliation ledger.
In principle, it's possible for the R/3 System to automatically derive this CO account assignment object, the reconciliation object. However, all postings made in CO for costing-based Profitability Analysis are logged in the reconciliation ledger under "reconciliation object". In this manner, the reconcilation ledger identifies the exact values flowing into the operating profit. If you post reconciliation objects during revenue postings to cost centers or profit centers, you must do so while keeping the interpretation of the reconciliation ledger reports in mind. The sums of revenue postings to profitability segments, cost centers, and profit centers cannot be broken down further.
Kindly help
Thanks

Hi,
On a cost center you have costs! In the cost center is possible to block Actual revenues (KS02)
When you post revenue on a cost center you have to see it as negative costs and use cost element type 01.
11 you are using for CO-PA and FLEX (RE)

SE117: General error during acceptance posting

Hello all,
I have ceated a Shipping cost document, account assignment is fully completed.
While I am trying to transfer the shipping cost document, the following error message occurs in the log:
(SE117: General error during acceptance posting)
Can any one please help through the hint on how to get rid of this?
Thank you so much in advance.
Manikonda.P

I too have run into this error message when attempting to transfer a Shipment Cost Document to FI/CO.
It is obvious that this error message is not very descriptive so here is what I did in an effort to resolve:
First, attempt to manually post an FI document using the same G/L Account Assignment used in the SCD that is throwing the error message "SE117: General error during acceptance posting". You can use FB01, FB60, ME21N and then enter a GR, etc. to verify that the account assignment is valid.
What I discovered in my scenario is that the profit center I was using was blocked. Once I used a valid G/L Account + Profit Center Combination the error went away and I was eventually able to transfer the SCD to FI/CO.
Thank you.
Rich
http://www.linkedin.com/pub/4/665/981

Combing multiple sales order into one delivery - help needed!

basically, this is what im doing and maybe someone can direct me in the right direction?
i goto vl10c, enter the shipping point and then goto the sales order tab and enter one sales order in sales document 1st field and then in the second field for sales document i enter the second sales order. it then opens up a list of the 2 sales order and i can check mark one or both sales order here. after i check mark both, im not sure what to do to combine the 2 sales order into one delivery document. anyone???
thanks!

I will suggest you to go through the link [http://help.sap.com/saphelp_erp60_sp/helpdata/en/38/c1853488601e33e10000009b38f83b/frameset.htm]
I request you to search the SD forum before posting the issues. You will get plenty of treads on this subject.
Check the required confiquration for "combing multiple sales order into one delivery" and if still problem persists then you post the error you are getting for resolution.
Best Regards,
Bashir
Edited by: Bashir on Oct 16, 2009 8:58 AM
Edited by: Bashir on Oct 16, 2009 8:58 AM

The transfer of sales plans into CO-PA

At the present time sales plans are created in the several info-structures. There is only the one unit of measure in the each info-structure (for example: mt, meter and others). Further, the number of different units of measure for selling products will increase only, especially for services. It leads to the fact where we have to create new info-structures and have to implement additional customizes and create a new chain for the transfer of data into CO-PA each time a new unit of measure arises. Also it makes more comprehensive the process of the sales plans transfer for the End Users.
We think that it is logically to create the info-structure, to collect there all kinds of units of measure and transfer the data into CO-PA by the one action. Practically we cannot to do it because we have to enter the one base unit of measure into characteristic and key figures customize area (MC7F). And after transferring sales plans into CO-PA all data are reflected in that base unit of measure, although initial data were in the different units of measure.
Also our attempt to transfer units of measure as additional characteristic was fault. In that case the system gave us an error when we were trying to create a task for transfer.
Is there a solution of above problem?

HI,
Are you using Costing based, Accounting based or both of them?
We are already tried to use enhancement COPA0005 but this produces a duplication of segments and a different values of characteristics between what is posted from FI documents and what is posted on COPA document; this situation is not acceptable by client.
Concerning to enhancement COPA0001 i don't know which table i have to refer to for obtaining number of sales order, since accounting document (BKPF) and material document (MKPF) are not yet posted so far. Could you please give me this information?
Thanks a lot in advance for your kind support.
Erasmo

How to upload Sales Orders into B1 from an excel file?

Hi,
I'm a new comer. I'm looking for a program of uploading Sales Orders into B1 from an excel file. Where can I find a reference book for it? Or I appreciate if someone could offer a program sample.
Thanks
ZAP

Hello ZAP.
I do not have such code, but i this link /people/janos.nagy/blog/2010/01/25/exporting--importing-authorization-using-ms-excel-in-sap-b1 you can find an excel example about authorization, and using Single Sign On (SAP B1 must have run with excel)
The method is similar, you can run any DI API operation from excel.
Here is an example to add a sales order
Dim oDoc As SAPbobsCOM.Documents = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
        oDoc.CardCode = CUSTOMER_CODE
        oDoc.DocDate = Today
        oDoc.DocDueDate = Today
        oDoc.Lines.SetCurrentLine(0)
        oDoc.Lines.ItemCode = ITEMCODE
        oDoc.Lines.Quantity = QTY
        oDoc.Lines.UnitPrice = PRICE
        If oDoc.Add <> 0 Then
            MsgBox("Error " + oCompany.GetLastErrorDescription())
        Else
            MsgBox("SAles order added")
        End If
You can repeat the setcurrentline section as many time as lines you have in the SO:
Regards,
J.
Ps: Reference: SDK help and sample programs, which included in every patch.
Edited by: János Nagy on Feb 10, 2010 9:50 AM

Denominator (Divisor) for Conversion of Sales Qty into SKU

Dear Friends,
In our scenario system is converting Confirmed quanity (for ex 57.4 Hrs) (Schedule lines--->Sales--->Confirmed quantity) into Required Quantiy( 0.080 MMN) (Schedule lines--->Sales--->Quantities--->Required Quanity) as per the conversion( i.e 720 hrs equals to 1 MMN) maintained.
Now we want to change this conversion from 720 to 160 hrs. But we are not able to locate the source from where this value is being picked up. I have checked in Material Master Data--->Additional Data--->Units of Measure. There is no maintainance for Hrs to MMN conversion.
Please suggest.
with regards,
S.Dayanand

Dear Friends,
In our scenario system is converting Confirmed quanity (for ex 57.4 Hrs) (Schedule lines--->Sales--->Confirmed quantity) into Required Quantiy( 0.080 MMN) (Schedule lines--->Sales--->Quantities--->Required Quanity) as per the conversion( i.e 720 hrs equals to 1 MMN) maintained.
Now we want to change this conversion from 720 to 160 hrs. But we are not able to locate the source from where this value is being picked up. I have checked in Material Master Data--->Additional Data--->Units of Measure. There is no maintainance for Hrs to MMN conversion.
Please suggest.
with regards,
S.Dayanand

Change BSEG-ZUONR during the Post Goods issue.

Hi
We wanted to Update the BSEG-ZUONR with sales Order no( traverse back to the Original SO during reversal) ( Basically Assignment field (ZUONR) in the Accounting side) after performing the Post Goods issue USING TRANSACTION VL02N.
Is there any user exit which can allow us to update the accounting field ( ZUONR) during the post goods issue ( Tcode VL02N)?
Thanks a lot.

Hi,
you can achieve this using the concept of validation and substitution rules in FI (Check transaction OB28) or below help
http://help.sap.com/saphelp_erp60_sp/helpdata/en/27/06e23954d9035de10000000a114084/content.htm
Hope this helps
Regards
Shiva

How to combine the line items of 2 Sales orders into 1 delivry

how to combine the line items of 2 Sales orders into 1 delivry
and their process, pre-requisites and tcode

The prerequisites are:
1) In the customer master sales area data, shipping tab, there is a field called Order combination. u must tick that.
2) for the two orders, the sold to party & ship to party must be same
3) both orders must have created from same plant & shipping points
4) the line items must have same loading grp.
5) the both orders sheduline line date must be same.
transaction code for the same is VL04.
enter the required data and select the order nos to be processed.
Do reward points if it is useful

Filling billed quantity into FI-CA document (DFKKOPK-MENGE)

Hi,
I need some advice if it is possible "somewhere" in the System (FI-CA) to customize the filling of the billed quantity into FI-CA document. Table DFKKOPK (G/L Account Items in Open Item Account Document) field MENGE - Quantity.
Is this functionality in SAP standard processing or should I use some Event (for example 0061 - Posting: Check Complete Document, Set Customer Fields) to fill out this field.
Thanks for help
Vlado

Hello Vlado,
there is no special activities necessary to transfer the quantity from DBERDTAX-MENGE to DFKKOP-MENGE.
Please check the
event R413,
Field status group XXX for the G/L account, that the field Quantity is possible ( => 'X' Req. entry) and
note1367393.
Best regards.
Christiane

Evaluate button inactive during confirmation posting

Hi Friends,
I am working with SRM5.0.
I have defined a survey and a questionniare for VE during confirmation.
Have assigned a use group and a user with valid email address to the survey
In define events for VE, I have made entries for transaction category "confirmation" and have selected "procedure" as "individual-sel. via button".
I can call the questioonaire from SPRO using right click mouse button on user--> call questionnaire in WEB"
Also required SICF services are active and I am able to perform VE on portal using Vendor List.
With these settings, when I perform the VE for the specified product category, I am finding "Evaluate" button inactive during confirmation posting.
Any hint for my issue? Pls suggest.
Thanks
Regards,
Prashant

Hi Prashant,
1) In define events, trying keying in an "*" for vendor & P.Org, enter the source system as your SRM system. Did you assign the survey & questionnaire in this define events. Enter probability as 100. Then try to post a confirmation.
2) Defining a user group is not mandatory. Hence, you may try to delete this & re-try if point no.1 does not work.
Cheers,
Akash

Entering sales quantity into PA during GL posting

Similar Messages

Maybe you are looking for