Denominator (Divisor) for Conversion of Sales Qty into SKU

Dear Friends,
In our scenario system is converting Confirmed quanity (for ex 57.4 Hrs) (Schedule lines--->Sales--->Confirmed quantity) into Required Quantiy( 0.080 MMN) (Schedule lines--->Sales--->Quantities--->Required Quanity) as per the conversion( i.e 720 hrs equals to 1 MMN) maintained.
Now we want to change this conversion from 720 to 160 hrs. But we are not able to locate the source from where this value is being picked up. I have checked in Material Master Data--->Additional Data--->Units of Measure. There is no maintainance for Hrs to MMN conversion.
Please suggest.
with regards,
S.Dayanand

Similar Messages

How to fill conversion table TAUUM in BW for conversion of Sales Order Type

When importing sales order data from SAP ECC to SAP BI, conversion routine AUART can be used to convert Sales order Type from its internal representation to an external representation. (For example, the standard sales order has an internal Sales Document Type code TA, and an external code OR).
The standards SAP conversion routine AUART uses table TAUUM as a lookup table. This table has lots of data in SAP ECC, but it is empty in SAP BW.
How can we copy data from table TAUUM in ECC to table TAUUM in BW?
Do we have to create a maintenance view on the table, and type in the entries? Or is there a more automated way?

Hi Jay,
Make sure the extract structure is active. You can check the same from LBWE > 11: SD Sales BW> MC11VA0STI is active.
If the extract structure is active. Inorder to fill the setup table. First delete the setup table for the application area 11 from SBIW transaction. Then fill the set-up table for the application area 11 as you did for deliveries.
Then check whether data source is pulling data.
Let me know if there is an issue even after following the above steps.
Thanks & Regards,
Namrata

Conversion of binary string into headecimal

Ho will i convert binary string into hexadecimal fromat

HI,
Thanks but the above module is not present my system.
I have number which needs to be converted into binary first and then into Hex.
I have written it code for conversion of decimal number into Binary.But i am not able to convert it into Hex.
My rough code is ....
types : begin of t_temp,
        r1 type i,
        end of t_temp.
data : ty_temp type standard table of t_temp ,
       wa_temp type t_temp.
DATA : num TYPE i,
       temp1 TYPE string,
       temp2 TYPE string,
       temp3 TYPE string,
       temp4 TYPE x.
temp1 = 0.
temp2 = ''.
num = 64.
while num ne 1.
temp1 = num MOD 2.
num = num / 2.
If temp1 = 1.
    num = num - 1.
endif.
concatenate temp1 temp2 into temp2 .
endwhile.
temp1 = 1.
concatenate temp1 temp2 into temp2 .
condense temp2 no-gaps .
WRITE : temp2 .

Order type for conversion of planned order

Hi gurus,
I have configured 6 different order types for PPPI and not maintained any default order type for conversion of planned order into process order. But when I am trying to convert planned order into process order by branching out from MD04 to COR7 via the popup window, default order type PI01 gets selected which cannot be changed. However, if I am converting the planned order into process order directly through COR7, then choice of order type is available.
Could you please tell me how to ensure choice of order type while branching from MD04 to COR7?
Regards,
Abhik

Hi Datta
The order type is selected as below
First it will look for any scheduling profile is maintained. If so it will select default from the profile.
Next if the profile is not there it will look for any scheduler is assigned in material master. Through the scheduler it will select the profile and default order order type.
Next it will look in plant parameter. With conversion from plan order to prod order order type
Next it will look in MRP group conversion order type, if you have mainted it in Material master.
This is the sequence. Please check have to maintained any of these.
Hope this is clear
Regards
J . Saravan

Combing multiple sales order into one delivery - help needed!

basically, this is what im doing and maybe someone can direct me in the right direction?
i goto vl10c, enter the shipping point and then goto the sales order tab and enter one sales order in sales document 1st field and then in the second field for sales document i enter the second sales order. it then opens up a list of the 2 sales order and i can check mark one or both sales order here. after i check mark both, im not sure what to do to combine the 2 sales order into one delivery document. anyone???
thanks!

I will suggest you to go through the link [http://help.sap.com/saphelp_erp60_sp/helpdata/en/38/c1853488601e33e10000009b38f83b/frameset.htm]
I request you to search the SD forum before posting the issues. You will get plenty of treads on this subject.
Check the required confiquration for "combing multiple sales order into one delivery" and if still problem persists then you post the error you are getting for resolution.
Best Regards,
Bashir
Edited by: Bashir on Oct 16, 2009 8:58 AM
Edited by: Bashir on Oct 16, 2009 8:58 AM

ME22N Show Numerator for Conversion of Order Price Unit into Order Unit

I hide Price in Me22n, when we do this, system hide the "Numerator for Conversion of Order Price Unit into Order Unit", but i want show this field on screen.
This field is : in Me22n -> view "Quantites/Weights "->"Order Unit <-> Ord. Price Unit".
How do i for this?

Hi Paul,
The field for Denominator for Conv. of Order Price Unit into Order Unit is MEPO1311-BPUMN and for Numerator it is MEPO1311-BPUMZ. Try hiding only the Denominator field using Loop at Screen. <CODE> ENDLOOP and see.
Hope that it helps. Reward if useful.
Thanks and Regards,
Maddineni Bharath.

Quantity conversion check failed for one item; all qty lines deleted

Hi IS Oil Experts,
Iam using the BAPI "BAPI_GOODSMVT_CREATE_OIL" for posting goods movement. I filled the additional quantities and unit of measures also in the BAPI table, But when tried to execute, Iam getting the error, "Quantity conversion check failed for one item; all qty lines deleted"
Please anybody tell me what is the error from end for resulting this message.
Thanks in advance
Prathib

Dear you!
I also get the issue that you meet. Can you help me to process it, Please/
Best regards, Huy.

I can no longer sign into Paypal Shipnow to print labels for non ebay sales.

Does anyone know how to print Canada Post shipping labels through Paypal for non ebay sales? I used to be able to do this but cannot figure out how to do it. My link does not work anymore.I called Paypal and they said to type Paypal.com/shipnow into the browser but that leads me to a log in page and after I log in I am at my Paypal summary page.Thanks in advance for your help.

nancyschina wrote:
Does anyone know how to print Canada Post shipping labels through Paypal for non ebay sales? I used to be able to do this but cannot figure out how to do it. My link does not work anymore.I called Paypal and they said to type Paypal.com/shipnow into the browser but that leads me to a log in page and after I log in I am at my Paypal summary page.Thanks in advance for your help.Please see: http://community.ebay.ca/t5/Seller-Central/I-m-Looking-for-a-Link-to-a-Blank-Shipping-Label-in-PayPal/m-p/308445#U308445

How to upload Sales Orders into B1 from an excel file?

Hi,
I'm a new comer. I'm looking for a program of uploading Sales Orders into B1 from an excel file. Where can I find a reference book for it? Or I appreciate if someone could offer a program sample.
Thanks
ZAP

Hello ZAP.
I do not have such code, but i this link /people/janos.nagy/blog/2010/01/25/exporting--importing-authorization-using-ms-excel-in-sap-b1 you can find an excel example about authorization, and using Single Sign On (SAP B1 must have run with excel)
The method is similar, you can run any DI API operation from excel.
Here is an example to add a sales order
Dim oDoc As SAPbobsCOM.Documents = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oOrders)
        oDoc.CardCode = CUSTOMER_CODE
        oDoc.DocDate = Today
        oDoc.DocDueDate = Today
        oDoc.Lines.SetCurrentLine(0)
        oDoc.Lines.ItemCode = ITEMCODE
        oDoc.Lines.Quantity = QTY
        oDoc.Lines.UnitPrice = PRICE
        If oDoc.Add <> 0 Then
            MsgBox("Error " + oCompany.GetLastErrorDescription())
        Else
            MsgBox("SAles order added")
        End If
You can repeat the setcurrentline section as many time as lines you have in the SO:
Regards,
J.
Ps: Reference: SDK help and sample programs, which included in every patch.
Edited by: János Nagy on Feb 10, 2010 9:50 AM

Actual sales qty forecast quantity in a single period calculation

hi experts,
i have a report requirement to display the report in below format in bex.
Jan-05     Feb-05     Mar-05     Apr-05     May-05     Jun-05     Jul-05     Aug-05     Sep-05     Oct-05
ACT     ACT+FC     FC     FC     FC     FC     FC     FC     FC     FC
3,361       3,807       4,833       4,069       4,491       5,935       4,776       4,926       6,386       6,898
312       342       457       381       393       544       439       445       634       676                                                          4,340       5,029       5,132            4,890           5,011             4,910             4,111            2,367             4,432
say for example we are february
in the bex report it has to display Actual sales qty for jan and act+forecast for feb and remaining months till december it has to display forecast quantities.
how can i achieve that in bex?
NOTE: ACTUAL SALES QTY, FORECAST QTY are two different keyfigures.
regards

******Actuals
when 'ACC_SAL'.
      if i_step = 2.
        loop at i_t_var_range into st_var_range where
                                    vnam = 'UV_CAL'.
          st_range-sign = 'I'.
          st_range-opt = 'BT'.
          st_range-low = st_var_range-low. "cper.
**** Get Current Week.
*DT = DT - 27.
          CALL FUNCTION 'DATE_GET_WEEK'
            EXPORTING
              DATE         = DT     "SY-DATUM
            IMPORTING
              WEEK         = week
            EXCEPTIONS
              DATE_INVALID = 1
              OTHERS       = 2.
**** Get previous week
          DT = DT - 7.
          CALL FUNCTION 'DATE_GET_WEEK'
            EXPORTING
              DATE         = DT   "SY-DATUM - 7.
            IMPORTING
              WEEK         = PRV_WK
            EXCEPTIONS
              DATE_INVALID = 1
              OTHERS       = 2.
          if week+4(2) = 01.
            st_range-low = PRV_WK.
            st_range-high = PRV_WK.
          else.
            st_range-high = PRV_WK.
          endif.
          append st_range to e_t_range.
        endloop.
      endif.
*******Forecast
    when 'UNCONDDP'.
      if i_step = 2.
        clear: st_range, st_var_range.
        loop at i_t_var_range into st_var_range where vnam = 'UV_CAL'.
          st_range-sign = 'I'.
          st_range-opt = 'BT'.
          CALL FUNCTION 'DATE_GET_WEEK'
            EXPORTING
              DATE         = SY-DATUM
            IMPORTING
              WEEK         = week
            EXCEPTIONS
              DATE_INVALID = 1
              OTHERS       = 2.
          st_range-low = week.
          st_range-high = st_var_range-high.
          append st_range to e_t_range.
        endloop.
      endif.

How to load budgeted sales dollars into SAP.

hello experts
we are using ecc 5.0
pl advise how how to load budgeted sales dollars into SAP
thnks
vinod

Hello,
Budgets are like threshold figures where your actuals cannot exceed your budgets.
Whereas, planned data is for variance analysis with your actuals.
You can configure the cost center planning so that the user can upload the data through KP06 or KP26
This is controlled by planning are in your planning profile. You need to use "Cost ctrs: Cost element/activity inputs" planning area for this purpose.
Hope you are conversant with Integrated excel upload.
To do integrated excel upload of cost center plan data.
IMG ==> Controlling ==> Cost Center Accounting ==> Planning ==> Manual Planning User Defined Layouts - Create your own layout or copy from standard layout and change it.
IMG ==> Controlling ==> Cost Center Accounting ==> Planning ==> Define User Defined Planner Profiles
Copy the SAPALL to ZSAPALL. You cannot change SAPALL as it is standard.
In ZSAPALL planner profile, select proper planning area and enter your layout.
Tick Integrate Excel.
Once the popup for KP06 comes, you need enter the data and save it. It would generate the file name.
With the same file name you need upload the plan data by using KP06.
In KP06
Extras ==> Excel Planning ==> Upload
Select the file as prepared in accordance with format at the time of generating the file name.
Hope this solves your problem.
Please let me know if you need futher help.
Regards,
Ravi

Custom Report For Excise On Sales

hi friends,
i need custom report for excise on sale like below format, can you please guide me to prapare FS for below requirement.
Material Code And Discriptiion
Sales Order No
Delivery No
Billing No
Accounting No
Excise Invoice No
Sold to Party
Billed Qty
gross value
bed
ecess
cess
she
total excise duty
invoice value
Regds
Ashwini

dear friend,
you can try the standard t-code SDO1 and change the layout
good luck!

Unconfirmed line items of a sales order into account in credit management

Hi Gurus
Updated the customer orders via prog. RVKRED09.
There is only one open order for this customer = 720662. My question is: in the credit master the sales value/credit exposure is USD 77.100,00. The order is for USD 105,900.00 .
Found out that line item 20 is not confirmed in the schedule lines. So the value in the sales value/credit exposure equals item 10 and 30. So my 1question is: Where is the setting that does not take unconfirmed line items of a sales order into account in credit management?
Thanks in advance
Regards
Nalini Iyer

Hi nalini
Even though , you create a sales order for that line item , but if that item is not confirmed then the value wont be considered. into credit exposure. .
But once it gets confirmed then the value will be taken into credit exposure..
Regards
Srinath

Restriction of number of POs for a single Sales Order

Hi,
Currently, For a Single Sales Order multiple Purchase Orders are being created. Now, the Client wants to restrict number of Purchase Orders for a Single Sales Order that means, he wants only 1 Purchase Order for 1 Sales Order. Could you guys suggest how can I do this..? Is there any configuration for this ? Please suggest.
A quick reply would be very helpful.
Thanks in advance.

Hi Pavan,
In VA01 once you enter into the document and give the sold to party name below that you can see PO No there give only one PO no and and PO date based on the requested quantity the sale order will be created subsequent delivery and billing will happen.
Regards
Ram

Order Related Proforma Invoice for Free delivery Sales Order Type

Dear All ,
The requirement is as given below :
We need to create an Proforma Invoice for Free Delivery order type (FD) . The item cat is TANN with
Pricing              B
Billing Relevance    A
The Pricing procedure is Free of charge - Zvar6. with R100 % dicount condition type .
Created Proforma ZF9 with doc pric "C". Maintained copy control .Between ZF9 and FD ( order related biling).with the following :
Copying requirements   008 Item/ord.pro forma
Data VBRK/VBRP         000
Billing quantity     C
Pricing type         G
The condition record is R100 is captured in the order and the net value becomes zero . But when i create Proforma Invoice ZF9, the Dicount condition R100 is not copied into the Billing document ( ZF9). I am not able to understand where the mistake is .
Can any one give their inputs .
Thanks in advance
Veera

Hello Veera
kindly check whether free good determination is activated for the combination sales org, dist channel, division, document pricing procedure(C), cust pricing procedure, free goods pricing procedure.
thank you
Anirudh

Denominator (Divisor) for Conversion of Sales Qty into SKU

Similar Messages

Maybe you are looking for