Enterprise setup and software

Dear friends,
I own a couple shoes retail stores. The information I get is through notebooks and paper material in general.
I would like to setup a database which will store data like customers, products, warehouse, etc.
I cannot use software to enhance accounting, since Greek law don't accept random developer ERP software, but the ones the gorvenment has approved.
Nevertheless, I don't care about enhancing accounting at the moment, I just wish to get better information route.
Would you propose a hardware (hardware & networking) and software setup that will effectively serve my information needs ??
After some googling, I think that a mac server running lightspeed and several iPads will serve me well...
Are there better alternatives ???
Thanks

Mac (does not need to be a server) runnig filemaker and couple of ipads with filemaker also loaded. up and running with 20 mins.

Similar Messages

WPA2 Enterprise setup question

I have been trying to complete a WPA2 Enterprise setup, and I have hit a wall in troubleshooting. The current setup has two SSIDs, but the users only use one of these SSIDs, and that one is setup as WEP (I know...I know). I have been tasked with getting the users on a stronger security setup, and I thought that the best way would be to have them use WPA2 Enterprise, and they would authenticate to the network using their Active Directory user name and password.
I have been trying to get the secondary SSID converted over to do this, but I am stuck. I have setup the access point (Cisco 1140) the way that I believe should work, and I have also went through the Radius server (Microsoft Server 2008 R2) and set it up with some suggestions I have ran while researching.
I am hoping someone can see what I am doing wrong, or guide me to setup a more secure connection. My networking/Cisco skills are intermediate so there are things that I miss or could improve on at times.
I am attaching the config on the access point, and some screen shots off of our Radius server.
The radius server is 10.90.9.9
SSID that I am trying to configure is AAA
AP IP address 10.90.6.6
Please let me know if there is any information that I am missing. I will get it to you right away.
Edit - One thing I didn't include was that we don't have a certificate for this. Preferably I would like to set this up without a cert, and just have them authenticate with the user/pass from AD. If a cert is needed though, I can get one. Thanks :)
Thanks.

Hi Brent,
Here is a working configuration for similar requirement using ACS as RADIUS server. Hope it is useful for you to get this working.
http://mrncciew.com/2013/11/14/autonomous-ap-with-external-radius/
Pls do not forget to rate our responses if it is useful to you.
HTH
Rasika

Wireless setup WPA2 and software

Problem. I have about 25 airport extreme base stations put around our school. There seems to be one problem. We moved our network to WPA2 and have a radius server all setup and working. everything is working perfect except when we try to get 25 ibooks working on one airport. After about 19 or 21 connect the seems to be a problem with the airport and it locks up. What is going on, i think that these airports can handle about 50 encrypted users. And about this software Airport management utility and software, where do i get it, would help my setup.
thanks

The Airport Management Tools software package is available via the link under the heading "Additional Resources" at http://www.apple.com/support/airport
Several people have noted problems with Base Stations in multiple Base Station setups, which seem to be related to use of firmware version 5.6. These problems seem to go away with use of the previous version 5.5.1 (which of course doesn't support WPA2) - get it at:
http://www.apple.com/support/downloads/airportextremefirmware551formacosx.html

Optimal setup HDD and Software Settings

I am doing a system reload to setup one of my systems to be
dedicated to video editing and effects. My Hardware is:
MB: P6t Delux V2
OS: Win7 64bit
CPU: I7 920 (Stock no OC)
GPU: Nvidia 285
RAM 12GB @1600
HDD 1: 500GB 7200 RPM
HDD 1: 500GB 7200 RPM
HDD 1: 1TB 7200 RPM
HDD 1: 1TB 7200 RPM
HDD 1:1.5TB External USB for backups only
Software I user Premiere Pro CS5, After Effects CS5, SoundBooth CS5 and Photoshop CS5. My question for software is how to best set it up. I have seen many caching/Scratch setups and various CPU Ram allocations and honestly I am a bit confused by it. Also the render Performance vs Memory seems to make no difference in render times. Is one better to select over the other? I use Dynamic Linking a lot so I am not sure if that makes a difference in anything.
I know all this info can be found in various threads in the forum but I get some conflicting info as I read through them.
One last question. Should a reboot be done prior to exporting? I might spend hours doing effects and cuts and I am concerned the RAM gets a little full so I reboot before I render because it gives me a warm fuzzy, but is it really necessary?
Thanks in advance... TJ

Thanks for the reply.. Can you recommend or direct me to the software settings in Premiere and AE?
***EDIT*** One other thing. Would I get much of a performace boost by upgrading my GPU to a 485 or my CPU to a 950?

What is the best setup (cords, hardware and software) for converting tape cassettes to mp3 using iMac?

I have a huge collection of tape cassettes that I want in my iTunes library. I want to know what the best cords, hardware (type of Tape cassette player/recorder) and software to use.

It depends on what kind of inputs your Mac has:
If your iMac is a 2012 or older model it probably has an audio line input, in which case you can directly connect your tape deck outputs to your iMac. Generally this requires a cable with 2x RCA male connectors on one end and 1x 1/8" (3.5mm) stereo male connector on the other end.
If you have a more recent iMac that does not have a line input you will need to get a USB audio interface like a Focusrite Forte, but in these cases you will need to pay attention to the kind of cable inputs the USB device has.
In both cases you will need recording software. There are many choices. I have used Sound Studio with great success for tapes, vinyl and live recordings. (Note: if you are using a USB audio interface it may come with its own recording software.)
Pay attention to whether or not your tapes were recorded with or without Dolby B or C noise reduction; and also whether or not your tape deck supports none, Dolby B or Dolby C - getting each tape matched with your deck settings makes a big difference in the results. And depending on how quality conscious you are you may also want or need some noise reduction software, in which case I suggest looking at Wave Arts MR Noise, SoundSoap or Audacity.
You might also consider just purchasing selected CDs instead of investing in all the work required to set up, record, edit & clean up recordings from some of your old tapes.

New user - questions about email setup and synchronization

Hi,
I'm a not-particularly-techno-savvy new owner of a BlackBerry Curve 8900. My questions are:
1 I seem to only have the option to use a work email account with a BB Enterprise server and not the option to create or add an email addy. How do I resolve this?
2 I've installed the BlackBerry Desktop Manager but when I try to synchronize data from my device - organiser stuff and contacts - I get a message saying there are no applications configured, with subsequent instructions as to how to do this but I then have to choose from a huge list of folders and other stuff and have no idea what to do!
I'm really hoping someone will be kind enough to try and help as I'm floundering dreadfully.
Thanks in advance.
Jan

Jan,
When you install Desktop Manager it gives you the option to setup with an enterprise server or internet email, I can't tell from your post which you have.
However, to pick the applications to sync, assuming you have Desktop Manager 4.7,
open Desktop Manager
Click on Synchronize on the left side of the screen
On the next screen that opens, choose Synchronize under the word "Configure" (also put check marks in all the boxes that will allow you to check)
On the next screen to open choose Synchronization on the "right" side
In a couple of seconds another screen will open up where you can choose what applications to sync (calendar in Outlook, tasks in Outlook, Contacts in Outlook etc) just choose each program you need to sync and choose the program on your PC to use such as Outlook.
I also have the 8900 and it syncs with my Outlook 2003 for contacts, calendar, memo and tasks.
Hope that helps.
Steve

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."

Hi.
I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
Steps I have taken:
* installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
* The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established. Please check your setup and try again."
Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?).
Then how about the Infrared option? I see on the PDA it has a red area that one can "beam" info. Is this the same as Infrared or my 2nd option?
I love my Visor and want to continue using it, but need to backup the valuable info!
Any help with this would be greatly appreciated!
THANKS!!!!!
Post relates to: Visor Pro

Hello lwalbring and welcome to the Palm forums.
Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option. Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico. This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2. Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2. The software is free and the link is all the way at the bottom of the screen.
Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter. Some laptops still have IR ports and most desktops don't.
Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
Alan G

Free? Setup and Connection in "Get Connected"

Just to see if anyone had the "No connection Fee" experience with the recent BT's promotion in their "Get Connected" package.
My BT line was installed on 28th Jan after joining above promotion which was due to expired end of Jan 2010 and was extending, probably still going, in which the setup and connection fees are waived if signed up for 18 months, which I did.
The first bill came at beginning of Feb showing the full connection fee of £124.99, I had to call BT to sort this out, the voice at BT said, oops, discount show have been given, admin error !! The money will be credited in the next bill (28th Feb) and the options I was given were
1) Pay the full bill (as I've DD setup to do so already) then get the credit in my next bill - no chance, I rather keep the money in my pocket!!
2) Cancel the DD, suspend the payment, wait for next bill (with the credit), then everything will sort itself out - this was the option I then agreed.
However, I have lost out the discounts on line rental (From DD and paperless billing) and I can't setup the account till the Feb bill has been paid.
So from a BT admin error, it cost me both time (to sort this out on the phone and re-setup the DD) and money due to loss of rent discounts (and I don't know when I can setup the DD as the website is not allowing me to do it currently, may be due the the Account is being suspended).
What a hassle, all from a BT admin error !!

The situation is getting more and more in BT's favour!!
This month's bill (dated 28th Feb '10) has eventually available online on 2nd March. Correct, the £124.99 connection charge has been reversed but on the date of the credit, from the basic Weekend only package, I'm now on Evening & Weekend Package costing an extra £2.99 per month - which I absolutely do not need !!
So I phone up and eventually spoke to a very nice gentleman in Billing Section, agreed to the, yet an operator error by enterring a "wrong" code causing the upgrade of Calling Plan. Also agreed to credit me with the manual payment processing fee of £1.50. Unfortunately, after over half an hour on the phone, not able to change my Calling Plan Back and said he'll have to pass it onto someone else to sort out the next day, which would be acceptable as he did genuinely want to help.
I kept a close eye on the Calling Plan details online over the last 2 days, all the changes (and credits) have been actioned and can be seen online, great, I thought, until I looked at the calling plans page. I'm now on 2 plans costing me a total of £23.08 per month !!!!
The Weekend only plan is £11.54/month which is correct, but I'm also on "the weekend + free connection package" also costing £11.54/month giving a total of £23.08 per month, I assumed this will start from the previous change date as requested by me.
The only way to explain all this is the BT System has been program in such a way that doesn't matter how had the operator tries, the end only way the changes can be accepted is by charging more month per month !!
Come on software guys (or is it management?), please sort this out, this is not accetable !!

Oracle BPM Enterprise Standalone and Active MQ

Initial question was how to setup Oracle BPM Enterprise Standalone and Active MQ.
After many hours of searching, I found that it's a simple fix, of adding the the ActiveMQ jar to BPMEnterpriseHome/ext folder.
Edited by: Del Hass on Aug 30, 2012 11:19 AM

Found my own Answer and included it in OP

Got new miniMac servers with 2x750GB drives. How to setup and confirm RAID mirror?

Literally just got shiny new miniMac Server with the dual 70GB internakky hard drives/disks with
OS X 10.7.$ LION pre-installed. What a nice machine in a super cool box!
Seemed to bootup and run fine!
Now my issue (there will be more for this MAC newbie):
A. How to setup AND more importantly (item B below) CONFIRM that a RAID MIRROR is working?
Want nothing fancier than 2-nd drive is exact duplicate of 1-st drive at all times.
That is, an 'active and full up-to -the second" backup of the main 1-st drive.
I have done nothing to 1-st drive as it came from APPLE.
When I try to setup RAID set using DISK Utility, I get message about system(1-st drive) can't be used in a RAID or such.
yet I can add 2-nd drive to what I tink is a RAID set and then 'Enable' it.
It seems to add another entry to thr left-side of drves list panel but not sure that 1-st and 2-nd drives are BOTH in the new
"RAID SET' or that the set just consists of the "single" 2-nd disk?
B. I don't think that 1-st drive data is actually being duplicated to 2-nd drive.
For instance, how do I know that it was 'caught up' to match 1-st drive AND then is
staying caught up?
C. A 'RAID UTILITY' Icon brings up a not-available message, but I think that is because I don't
have HARDWARE RAID controller, just software RAID, correct?
D. What is 'Time Machine' and how does it play into this? I do assume that somehow/someway I need to
have off-machine backups also to be truly protected? How would a 2-nd identical miniMAC server be best
deployed to back each other up, in addition to their own internal RAID-ed disks that items above address?
My whole point of buying 2x750GB disks was to have mirror RAID set and
(foolishly) assumed that factory would set it up that way.
Please help me get setup right so when the inevitable crash happens,
I have some chance of recovering from it.
Regards,
Paul T
emai: [email protected]
Apple ID: N3UD
Phone: 610-613-0610

A. What are you adding to the RAID: a partition or a hard drive? You can only add hard drives to a RAID. RAID Utility should confirm that your RAID is working
B. No, I don't think so
C. It's because you haven't got RAID hardware.
D. Time Machine is a backup system in external drives. If you want, you can do backups in a external hard drive.

Ask the Expert: Enterprise Design and Deployment of Multicast

Welcome to this Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about Cisco enterprise design and deployment of multicast solutions.
The enterprise world is evolving to be overcome with large throughput capacity and record numbers of users connecting to the network. Mechanisms such as multicast, which allows for a minimization of throughput for multiple users subscribing to the same stream, are a welcome addition. Applications such as enterprise all-hands video streaming, trading applications, mass operating system deployment, and custom implementations can put a strain on the network if done via unicast. Multicast can minimize this strain by replicating a single stream for subscription by multiple parties who would like to receive the same information. For this Ask the Expert event, Patrick Lloyd, CCIE R&S no. 39750 and a network consulting engineer with Cisco’s Enterprise Advanced Services Delivery Team, will answer questions about multicast design and implementation based on best practices and prior experience with large enterprise deployments.
Patrick Lloyd is a network consulting engineer for Cisco’s Enterprise East Advanced Services team, working to support and lend his expertise to a number of financial, insurance, healthcare, and consulting customers. In his four years of experience, he has lent design expertise to multicast networks ranging from 500 Cisco devices and 20K users to upward of 4500 Cisco devices and 50K users. Patrick is certified with his Cisco Certified Internetworking Expert no. 39750 in the Routing and Switching track and also has achieved certification in CCNA Security and Securing Cisco Routers and Switches as part of the CCNP Security track. Patrick received his MS degree in networking and systems administration from Rochester Institute of Technology in Rochester, NY, and his BS degree in computer science from Eastern Connecticut State University. He frequently gives customer-based knowledge transfers.
Remember to use the rating system to let Patrick know if you have received an adequate response.
Because of the volume expected during this event, Patrick might not be able to answer every question. Remember that you can continue the conversation in Network Infrastructure under the subcommunity WAN, Routing & Switching shortly after the event. This event lasts through September 12, 2014. Visit this forum often to view responses to your questions and the questions of other Cisco Support Community members.

Thanks for the question! This is actually a good one that I've encountered with a couple customers in the past, the tradeoff between a flood and prune type design, as opposed to the shared tree -> shortest path tree sequence. As per Cisco best practice, we are actively trying to get customers to implement sparse mode, going so far as to not support PIM dense mode in our data center products. And for good reason! The last thing you want is a chatty protocol within the data center which is flooding traffic out to receivers who may or may not be interested in it every 3 minutes. Instead, you're much better off having interested receivers join a stream, have your RP connect the interested senders and receivers, and then transition to the shortest path between source and destination.
That being said, if you're studying for CCIE or looking to get experience in how multicast works, dense mode should at least be a lab exercise!
Links for reference as to the difference in PIM modes:
Dense Mode Operation:
http://www.cisco.com/en/US/docs/ios/ipmulti/configuration/guide/imc_pim_dense_rfrsh.pdf
Pim Modes and explanation of each:
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3750x_3560x/software/release/12-2_53_se/configuration/guide/3750xscg/swmcast.html#wp1077051
A great slide deck to learn the operation of multicast:
https://www.ciscolive.com/online/connect/sessionDetail.ww?SESSION_ID=6633&backBtn=true
Troubleshooting Multicast:
https://www.ciscolive.com/online/connect/sessionDetail.ww?SESSION_ID=78578&backBtn=true
Let me know if this is the answer you're looking for!

Lightroom workflow - HD setup and file locations

Has anyone waxed poetic about catalog and image file locations or workflow? How do you go about conceptualizing a drive and file storage strategy for a Lightroom workflow? Of course this will vary depending on the equipment you have, but I'd appreciate and links to stories that run through various configuration setups and the possible workflows and locations for catalog, master files and backup locations. Here's my setup:
- Mac Pro (3GHz 8 Core) with two 750GB internal drives (one for OS X) the other for Apps and content storage); two empty drive bays for now.
- PowerBook G4 1.2GHz w/160GB internal drive that I use on location, or as an in-lab Flash card reader if the Addonics external, Firewire card reader attached to the Mac Pro fails to see a camera card (as it sometimes does). This second in-lab scenario adds some complexity to the workflow, although the machines are linked with Cat 6, gigabit Ethernet.
- OWC Mercury Elite Pro with two 750GB drives configured as a mirrored, software RAID on Firewire 800 for backups.
Should I set up the Lightroom catalog on the internal "content" drive and store all the actual image files there, reserving the RAID drive strictly for backups? This would mean that the RAID would only be used a redundant backup system (which is fine and what I originally planned) since it's probably slower than the single, internal drive. The problem is this: remembering to back up the files from the main content drive to the software RAID drive.
Or should I be using the slower, mirrored RAID for main content (master image file and catalog) storage.

John, Andrew and others:
Thanks for your thoughts. Do you also use Lightroom to manage all "working" versions of Photoshop files (multiple version - edits - of files in progress)?
During my first couple of projects, I ended up creating a "Working" folder for each project outside the Nikon folder-oriented hierarchy of the original image files. I did this only out of habit rather than workflow planning, but ended up with a second workflow outside of Lightroom.
Does anyone think it's better to simply save these files (with or without the "working" folders) into the same folder hierarchy with all the Nikon originals? I'm just trying to figure out how to organize the workflow for the in-progress files.
Again, before Lightroom, I managed these files in separate folders on the hard drive, and usually moved them to a new location for final storage. Clearly, that won't work for Lightroom, but what does? I'm getting into a bit of trouble trying to manage file (and working folder) locations as I try to transition to a new, database-driven workflow.

Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out!!!

Visual Studio 2013 Setup and Installation gets stuck at system restore point. what are the issues?, help me out ASAP

Hello nitinrathod29,
There are some possible fixes for this issue.
Please check the following thread:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/47bc6990-00f2-4d85-b3f8-9de03c637f43/visual-studio-2013-update-2rc-stucks-on-creating-system-restore?forum=vssetup
https://social.msdn.microsoft.com/Forums/vstudio/en-US/81478f51-37bb-4dbb-bd0c-beade1fd50ab/visual-studio-2012-professional-installation-getting-stuck-creating-a-system-restore-point?forum=vssetup
So here are them:
1. Check if you have any software which may prevent the installer from running. For example, Windows Defender or any other software which may restrict your permissions.
2. Just start the computer.
3. Run the setup as admin.
4. Check your UAC permissions.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Oracle enterprise linux and oracle 10g?

Hey;
I'm pretty new to trying to download oracle and get it installed on a linux box. I made a couple of attempts on linux fedora core 10 and windows vista home edition both of which didn't get very far. Since I just past my ocp exams via a boot camp (yay for me!), I'm hoping to get a couple of linux boxes up and running to ensure I get the concepts down through practice.
From what I'm reading, it looks like I can download enterprise linux, put that on a system, and then download oracle 10g and install that w/little or no trouble (at least not expected...)
Am I reading that right or did I miss something? Any info greatly apprecaited.
Doug O'Leary

Hello,
You can download enterprise linux and 10g and get going. Enterprise linux is pre-packaged for the required components required to install oracle software, here is a link for your future reference to see platform compatibility.
http://www.oracle.com/technology/support/metalink/index.html
Regards
OrionNet
Edited by: OrionNet on Jun 8, 2009 5:00 PM

Enterprise setup and software

Similar Messages

Maybe you are looking for