Enterprise Structure(Deletion of Storage Locations)

Hi Gurus
I am new to SAP MM module. I have created 5 storage locations in which i need to delete 3 locations.
What all precautions shouls i keep in mind before deleting the 3 storage locations. Kindly explain in details.
Regards
Bhupesh

If you have Stock in that 3 Storage Locations then First you Transfer the Stock (Should be nil) into another Storage Locations and Delete the Storage Locations in Trxn code OX09
If you have Extended / Created Material to that Storage Location then Set the Deletion Flag using MM06 at Stor Locn Level & save.
You can Perform the Stock Transfer using MB1B  / MIGO 311 Movement type.
Regards,
Ashok

Similar Messages

  • Deleting the storage location

    Hi,
    Can some one tell me how to delete the storage location. The situation is like this:
    Sales order has been created  for three different materials for a particular customer for a sales area.
    When out bound delivery was created for this order for one of the material a storage location was automatically selected. But when i check the sales order for the same material storage location was not picked.
    But the problem is that material is a non stock item and no storage location was maintined in the plant for that materil.
    And without doing the PGI shipment was created and subsequently shipment cost document as well. Then finally service acceptance has been done and invoice reciept is completed.
    Basically the material is RMC which is not a stock iteem.
    So now we want to create the PGI for the outbound delivery or delete the storage location for that material from the out bound delivery.
    Please explain the process in detail.
    thanks in advance.
    ravi k vinjamuri

    Hi Ravi,
    I am not clear as what you want to do? Can you pls explain your requirement clearly.
    Regards,
    Sreekanth
    Message was edited by:
            Sreekanth. V.T

  • Deletion of Storage location

    Hi,
    How can i delete the storage location which is in use?
    is there any prerequisits before deleting the storage loaction?

    Hi Jagadish,
    You can delete a storage location by using tcode MM06. This will set the deletion indicator for that storage location. Later by archiving it will be removed from the system.
    If u have any stocks at that storage location, then u have to make sure to move them to other storage location. Also make sure that no movements in that storage location.
    This will help
    regards
    Anand.C

  • Material Master Record - How to remove or delete storage location

    Dear all,
    Is there a way to remove or delete a storage location accidentally extended via MM01 due to extending the general plant view?
    I've tried the following:
    1. I've used MM06 to flag the particular storage lcoation for deletion. However, when go to MM02 and select the plant view, the storage location that already been flag still exist for selection. I only get the warning prompt "The storage location has been flag for deletion".
    2. I tried MMSC attempt to delete and I get either messages with different material master record:
    a) "Material not fully maintained for this transaction/event"
    OR
    b) "Storage location 60BF already exists and cannot be deleted"
    P/S: If this question has been asked before by others, please point me to that thread.
    I'm grateful for any suggestion. Thanks.
    Steven

    Hi Jurgen,
    I've gone through the data archiving project in the past. I was actually hoping I don't have to go through this big exercise for this minor situation.
    The storage locations in the SAP system are fine. The problem is that when I came in to this organization, I found out that the procurement users have accidentally extended material master record to those storage location irrelevant to them. Those users don't post any stock to those accidentally extended storage location. They admit that it was a mistake. So, I don't really have to do stock movement or GI out from those affected storage location because there's nothing in them.
    Now that I've initially flag for deletion (MM06) of those mistakes done by those procurement users over the few years counting to 2000+ material master records affected. But the standard behavior of the SAP system allows change to proceed in MM02 except for that warning message MM081. So, I was actually asking around to explore if there's actually an option to make it an error prompt instead and stop the whole change process at MM02 transaction level.
    If I may re-confirm, what I've done so far via flaging for deletion of material master record at storage location level - is this the only correct solution available?
    Hope this clarifies my intention of opening this thread. Sometimes, users are quite tough in accepting the results from standard SAP system behavior.
    Thanks for the time in explaining.
    Steven

  • Stock determination finds deleted storage location

    Hello gurus,
    we are using stock determination in MIGO for goods receipts to automatically determine the correct storage location for delivered goods.
    Now we deleted one storage location and moved all materials stored there to another one.
    But still, for certain materials, the stock determination gives the old location. Then, when we try to post the receipt, there is (of course) an error because the storage location has been deleted.
    We use only one very simple stock determination strategy with just one item:
    Special stock indicator: F (unrestricted-use stock)
    Priority indicator: 1
    Any ideas, why the old location could be found?
    Thanks
    Alicia

    Hi Jürgen,
    no, I did not remove that item, because it was not even there in the first place.
    As I wrote in my OP, there is only one item with
    Special stock indicator: F (unrestricted-use stock)
    Priority indicator: 1
    The storage location is blank!
    I never used stock determination before and I know it is normally used for goods issue only, but in this system, there definately is an button called "stock determination" in MIGO for goods receipts. And when I click on it, the system determines a storage location where the material is stored. This works perfectly, except for the materials with blocked locations.
    Alicia

  • Can we delete material for particular storage location using MMSC

    Hi,
    Can we delete a Material for particular storage location of a plant usign MMSC Transaction?
    Thanks in advance.
    NDS

    Hi, It is not possible to delete the storage location from MMSC once it is saved, Material gets extended for that storage location, U have to delete the material at the storage location level.
    Now the only option to delete this assignment is with archiving.
    T-code: SARA object MM_MATNR
    Refer below link for procedure
    [Deletion Storage Location From MMSC  |Re: Deletion Storage Locaion From  MMSC]
    [Cannot delete Sloc in MMSC|Re: Cannot delete Sloc in MMSC]

  • Storage Location deletion.

    Hi All,
    When we delete a storage location then the address that we maintain for the same is also get deleted. Is it like that address for the same still lies in some Table even if the Storage Location is deleted.
    regards,
    Prashant Rathore.
    Edited by: Prashant Rathore on Sep 8, 2008 11:56 AM

    Dear,
    Please check table name V_T001L for storage location.
    In this table storage location and it's address is store.
    so when you delete storage location address is also deleted.
    Regards,
    Mahesh Wagh.

  • Storage locations - Should we delete or option to be blocked?

    Hi All,
    Our client has some project site where central warehosue willdeliver the material. These project sites can be created as storage location sfor delivery address purpose. After the project is completed nobdo should pick this storage location as delivery address. What options do we have ?
    1) Delete the storage location OR
    2) We have any option of blocking this location for delivery?
    Please help in that.
    Thanks in advance,
    KHAN

    Hi Shamsul,
    You should not really delete the storage location as this will effect existing material documents etc that refer to the location
    You probably want to change the description to 'Do not use' and then see if you can restrict further access via the use of Authorisation objects
    Regards
    Steve

  • Deletion or block storage location at material lable

    Hi friends.
    Can it possible delete or block storage location , once i have assign storage location to particulars material.
    Anil Chaudhary

    Hi,
    If u want to delete the storage loc for a single material then do the same thro' mm06, enter the material # and storage loc, put a del ind tick & save it.
    If u want to delete the storage location itself from plant then u can do the same as told above, thro OX09 by making the stock nil
    regds,
    CB

  • Where-used for Storage location

    Dear all,
    I have to delete a Storage location SL01 from system. Before I doing so, i need to perform below:
    1. I have to check SL01 is being used in what document. Can you advise what are tools that avaialble for me to perform where-used for SL01?
    2. If there are documents created and some of them are still open, do you advise to delete SL01?
    Please comment.

    Hi,
    Storage location comes into picture when you post a goods movement either a GR or GI.
    For this reason,When you create a Purchasing document a Po for example, it is not mandatory to define a storage location and the storage location defined at Po level canbe changed at GR level.
    So, before deleting the storage location you need to check whether there is available stock in the location.
    You can use the MB52 warehouse report to check the s.location stock .
    Hope it hepls.
    Regards,
    Bijoy Kumar

  • Tables to relate material, sales organisation and storage location

    Hi,
    I have to develope a program to download a file for stock.
    On my selection screen I have
    Material
    Sales Organisation
    Storage location
    and the file structure is
    MATERIAL | STORAGE LOCATION | QUANTITY | TODAY DATE |
    Can anybody please tell me what Table I shouid use bacause when I am trying to use VBAK and VBAP the order no is the key  and here I am not doing anything with order no.
    Regards.
    Kusum.

    Hi,
    You can use table
    MABW - Management of Differently Maintained Material Data in Retail
    or a combination of
    MARD and MVKE - where MARD gives Storage Location and MVKE gives the Sales Organization of the material number
    Regards,
    Sumalatha N.

  • Inter company STPO  delivery address showing the storage location address

    Hi Guys,
    While creating inter company STPO (different CC), the system showing delivery address is Storage location address, but i want to change plant address.
    Please help me how i can do this...
    Thanks in advance
    Regards
    Chandru.

    then delete the storage location in the PO item line.
    the storage location is the most detailed information in the PO, and it has an adress. If you procure to that storage location (that has a different address to your plant adress) then it is logic and makes a lot of sense that your supplier sends the goods to this location and not to an address where the material is not needed.

  • A query on Storage location of plant

    I have maintained wrong storage location in MM master for a particlar plant.  Now i need to delete the storage location of that particular plant. Kindly guide.

    Hi,
    Try this:
    Select *
    from(
    SELECT T0.[DocNum] as #,t0.cardcode as C, t0.docdate
    FROM ORDR T0
    WHERE T0.[DocStatus] = 'o' and T0.[DocDate]  = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-1,0)),10) OR T0.[DocDate]  = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-2,0)),10) or T0.[DocDate]  = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-3,0)),10) or T0.[DocDate]  = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-4,0)),10) or T0.[DocDate]  = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-5,0)),10) or T0.[DocDate]  = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-6,0)),10) or T0.[DocDate]  = CONVERT(VARCHAR(10), DATEADD(s,-1,DATEADD(mm, DATEDIFF(m,0,getdate())-7,0)),10)
    group by t0.cardcode,docdate,T0.[DocNum]) S
    pivot
    (count(#) for c in([cvt01],[cvt02],[cvt03],[cvt04],[cvt05],[cvt06],[cvt07],[cvt08],[cvt12])) P
    Note: Replace Cvt01,02...with your customer code.
    Thanks & Regards,
    Nagarajan

  • How to restrict Availability check for a particular storage location

    Dear all,
    As per the Business requirement, System should not consider the stock in a particular storage location.
    while sales order creation, system should not confirm the requested delivery date based on the stock available in that particular storage location.
    How could we map this requirement in SAP, Please educate me to resolve this issue. Your suggestions will be highly appreciated.
    Thank you,
    Raghu Ram.

    Dear Lakshmipati,
    as you said correctly this storage location is there in MMSC for the article which we are using in Sales Order.
    I have tried to delete this storage location but system is not allowing to do so.
    I could not understand, from where this storage location is being determined. we have not mentioned any where in article master data.
    please help us to resolve this issue, and thanks for your help in advance.
    thank you
    Raghu Ram

  • Material deletion flag at storage location level is not working

    I have a material that is created in some plants and also in some storage locations within each plant. If I mark the deletion flag at plant level I am not able to create a PO -> Me051 error message appears. Whereas if I mark the deletion flag at storage location level nothing appens. I am able to create a PO and also to create to goods receipt. Is there any customization that I should do in order to get the error message?
    Thanks in advance.

    storage location level deletion flag is not checked at order creation.
    it is assumed that you can change the storage location when you do the receipt.
    MRP run is at plant level, so the requirement is valid even the storage location view is flagged for deletion.

Maybe you are looking for

  • I have a bit of a problem...

    I would like to quit iPhoto, but I can't because it says that a photo is being imported when it's not... What can I do?

  • How to disable auto_home and individual datasets on Solaris 11 11/11

    Good morning, There's a lot of changes in Solaris 11 that I like, but two of the ones I dislike, I just can't seem to get rid of them. I'd like to disable auto_home, permanently. I don't want users' home directories to be mapped on /home . I've read

  • OWA SSO issues in Exchange 2013 - 2007 co-existence

    This may not be possible. For a multitude of reasons the client needs OWA authentication of Windows Integrated and Basic. As a result I''ve got a double prompt for users still on 2007 for OWA externally. Do you have to use Forms Based Authentication

  • Transfer photos from xp to ipad

    I can't transfer photos from a windows xp professional on my Ipad air... does somebody knows the solutions?

  • Audio Monitoring During Capture

    I have a Mac Mini (2.66GHz; 4GB RAM; 500GB HD) with FCE installed. I can capture with no problem and have audio, too. The problem is that I can't hear the audio when I capture. I have done it before but I can not remember how/what to select to get th