Envelope Template Problem

Hello. I'm trying to print an envelope template (with return address), just like in Appleworks.
But for all the templates I've tried, if the 'send to' address goes on longer than the template allows, a 'second envelope' is generated on the screen.
How do I create an envelope template that allows greater flexibility in addressing-length?
Thanks.

I tried four or five templates at random, and the issue occurred with them all. Easiest way to replicate this is to go to the end of the last line of the 'send address' on a template ('Dublin,' for example). Then keep hitting Return. If the glitch is there, after about ten Return's you can scroll up and you'll see two or three 'envelopes.'

Similar Messages

Security Envelope Template

Hi,
I'm still working my way through Acrobat 9 Classroom in a Book and am stumped on a portion of the Security Envelope Template.
When I select how I want to deliver the envelope, there's a popup that states, "The envelope template selected has form fields that have not been filled in. Are you sure you want to email this envelope without filling them in?"
How do I fill there template in? There is no option... nothing opens to be filled in as I would expect. Or, am I supposed to modify the template before I even start the process of sending a security envelope? I noticed after I sent it that the "From" portion is automatically filled in with my email address, but the "To" is blank and the postmark date and time are wrong.
Any help is appreciated. It seems like a good feature and I just used it again to send some sensitive information to my sister.
Thanks.
Here is a link to the instructions in the Classroom in a Book page:
http://www.adobepress.com/articles/article.asp?p=1272495&seqNum=8
Message was edited by: kspwft

I found the problem... I selected to "Send the envelope now" instead of "Send the envelope later," so after I finished entering the password security settings, the email client opened. If I select "Send the envelope later," then the template opens up and then I can enter the recipient information. However, is there a way to correct the date stamp so that it shows the correct time? Instead of 9:34 p.m. 5/31/10 it shows 6/1/2010 1:32 a.m.
Now I just tried a Stamp for the first time, and the date on the stamp is correct. So I don't understand why there's a disparity between the date stamp on the Security Envelope and the date stamp on the Stamp feature.

Custom Envelope Print Problem

3210 all-in-one gives error message when I try to print 5.75" x 8.75" envelope using Word (Vista OS)
. I went into Printer Preferences on the PC, right-clicked on the printer and set up the custom envelope saving the name. However, the size doesn't appear in Word's envelope "Options" diaglog box. Consequently, printer doesn't recognize envelope size.
Does anyone have any ideas why Word isn't recognizing the saved custom envelope size.
Thanks.

Hello, Last night I spent forever figuring that out, but not the way I think Vista & HP would do it. I kept getting the paper doesn't match error message, too. I finally figured out that I could:
1) Create a regular Word file (I did not use an envelope template) with landscape orientation.
2) Enter the return address & delivery address information (it was a funny greeting card, so I used word art) using text boxes with no borders (unless you want borders.) You can move the text boxes where you think they should go on the envelope by left clicking to get the brackets & then holding the mouse down while you arrange the text.
3) Go to Print, then Properties, go to the Printing Shortcuts tab & select landscape orientation there, too. Click okay.
4) You're back in the first print dialog box, & down in the bottom right corner where it says Scale to paper size, select A5.
5) Remove all the other paper from the tray & load your envelope in the main (bottom tray) face down, feeding lengthwise (remember it is landscape orientation), all the way to the right of the tray with the envelope closure toward the middle of the tray.
6) Now move the guide bar that is on the left of the tray over to secure it in place (I think that also lets the printer sensor know you're not using full size paper.)
7) Click OK & it voila!! It prints!
I went back in to the file & realized that it did not save my settings to do another, so you may need to do it each time. To make sure you have everything where you want it, you can print out a test print on regular size paper & hold it up to your envelope to fine tune the placement of address, etc, & to ensure you load the envelope the right way. & then remove all the other regular paper, & load the one envelope & pull the guide bar over. You may need to check that those settings are still in place before you print the envelope after the test one, but once you get the hang of it you can do great envelopes with your cards, & even spruce them up with google images, or other graphics that the regular envelope settings don't do.I am sure there is a "proper" way to do this, but this worked so why not! Good luck.

[URGENT] Ques::custom Template Problem in IF statement?

kindly help me out in solving this template problem...
this is what i have written for my JHEADSTART Template.. where i recieve error.
#if ( #WIZARD_PAGE_LIST_BEAN().selectedStep==3)
<af:panelPage title="#if (!${JHS.current.group.hasTreeLayout})#PAGE_TITLE()#end" id="panelPage" partialTriggers="CreateNewEquip_AccSpcEquip">
#else
<af:panelPage title="#if (!${JHS.current.group.hasTreeLayout})#PAGE_TITLE()#end" id="panelPage" >
#end
i want to check if wizard step has value 3 then corresponding line showed be executed....
NEED URGENT REPLY... THANKS

[CreateNewEquip_AccequipmentDefinition.jspx] org.apache.velocity.exception.ParseErrorException: Encountered "#WIZARD_PAGE_LIST_BEAN" at line 37, column 7.
Was expecting one of:
<STRING_LITERAL> ...
"true" ...
"false" ...
<NUMBER_LITERAL> ...
<IDENTIFIER> ...
Kindly let me know the Right expression for it ...

How to shift text within an envelope template

Hello,
I have created an envelope template to mail out some thank you notes. The envelope size is smaller than the average business envelope (3.75 x 5" vs. the standard business). Naturally, I went in to page setup and created a custom size for this template. I ran into trouble when I saw that the recipient's name and address blocks are too far shifted to the right. They run off the page and forces many other pages to be created as a result.
How can I shift the text back to the left? I, like many other smart users, have shifted to the iwork suite recently and I am having a little trouble assimilating. I tried to highlight the text and click the downward triangle, but the triangle will only shift right, and not left.
I skimmed through other posts and couldn't find anything similar to my situation. Thank you for your help.

Yes, I actually haven't thought of that yet. However, I'm attempting to merge my contacts within address book.
I feel like it shouldn't take any drastic change in my document. I guess if all else fails, I'll resort to looking for that merge widget.

I created an envelope template and want to print envelopes inserting addresses from a contact group in address book

I created an envelope template in Pages and want to print envelopes inserting addresses from a contact group in address book. How do I do that?

On what word processor will that be?

Why is the print area on all envelope templates more than 1/2 an inch from the left side of the envelope.. ? Can this be fixed or changed.. ?

Why is the print area on all envelope templates more than 1/2 inch from the left side of the envelope.. ? Can this be fixed or changed.. ?
I have pages 09 version 4.1... It is a small aggravation.. The left 3 or 4 characters on the return address would not print until I realized that by clicking on
" View " & " Show Lay-Out " that it was out side the printable range ...

It seems to be a Pages template " Print range " issue.. Both the Epson and the HP printers were doing it and it was today that I realized why.. !!
When I move it to where it will print there is large gap on the left margin of the return address.. Just wondering if anyone else knew about this.. ? My Pages is ' 09 ' version 4.1...

Do all envelope templates meet postal regulations?

Take the Modern Photographer Envelope Template, for example. I want to use this template, but the picture pushes the return address down the side of the envelope. Will it meet US postal regulations? It looks completely wrong but I wouldn't think Apple would release it if it wouldn't mail correctly.
There are others, too. Like the Typewriter envelope, Woodland envelope, etc.

Apple is a global company. The templates are sized to 2 standards, the ISO world standard and the tiny minority in the USA that uses its own widely varying non-metric sizes.
It will be a simple matter of you testing what is in your template against the US Post Office's requirements. If they don't match, then make the necessary adjustments which is only a matter of repositioning the text box, not that difficult.
Peter

Institutional Letterhead & Envelope Template

I'm trying to figure out how to set up a Pages template to accommodate my educational institution's letterhead. So far, I've not had any trouble setting up the first page with the correct margins:
top: 2.75 in.
left: 1 in.
right: 1.25 in.
bottom: 1 in.
The problem is that I want to create a page with the top margin increased to 1 in. that can I can capture as well as a #10 envelope. I can't quite figure out how to get the right combo of section and layout breaks to kick in so that I can mix and match the page sizes and margins in one document.
Maybe this isn't possible? (I notice that when I create a new document using Pages built-in business letter template, there are no additional pages that I can insert into the layout....)

The answer to my question is: no. There's no way to combine layouts in Pages. This is something that I CAN do in MSWord and would be worth bringing into Pages.

Dunning Letter template problem

Hi,
I've started using dunning letters but have a problem with a discrepency between the data that appears on my screen in the recommendation report (i.e the list of invoices being dunned) and the actual printed letter..
For example on screen I can see the list of invoices for a particular customer like this:
Doc No. / Date
50847 / 14.01.2009
50874 / 20.01.2009
50902 / 22.01.2009
51014 / 05.02.2009
50944 / 30.01.2009
51149 / 27.02.2009
But the print out shows:
50847 / 14.01.2009
50874 / 20.01.2009
50902 / 22.01.2009
51014 / 30.01.2009
50944 / 05.02.2009
51149 / 27.02.2009
Subtle difference but the dates of lines 4&5 have been swapped! All the other columns seems correct and I checked the actual invoices - the date showing on screen is correct - the printed version is wrong... I checked in PLD if the screen was showing posting date and the print out document date or something like that but it seems not. The template is 'Dunning Letter 01 (System) Doc ID DUN00001.
Can anyone advise where the problem is?
Thanks
Karen

Hi Gordon,
I found a SAP note which seems to be the same issue but it seems to me to be old and supposedly fixed by now - I am on 2007A PL40
Note 1117525
Symptom:
You print Dunning letters for a BP whose dunning terms are set as One letter per BP. In the printout of the Dunning letters, the rows are mismatched in such a way that the document dates do not correspond to the document numbers.
This occurs when you have later documents with earlier document dates.
Sorry for sounding clueless but not sure what you mean about replicating on test database in order to log support ticket?
I do have a test database which I use to test things on but didn't notice the document no/date jumbling until I did it on the live one.
How do I log a support ticket >- my other problems have been resolved with forum advice..
Many thanks
Karen

Service template problem - Unable to perform the job because one or more of the selected objects are locked by another job - ID 2606

Hello,
I’ve finally managed to deploy my first guest cluster with a shared VHDX using a service template.
So, I now want to try and update my service template. However, whenever I try to do anything with it, in the services section, I receive the error:
Unable to perform the job because one or more of the selected objects are locked by another job. To find out which job is locking the object, in the jobs view, group by status, and find the running or cancelling job for the object. ID 2606
Well I tried that and there doesn’t seem to be a job locking the object. Both the cluster nodes appear to be up and running, and I can’t see a problem with it at all. I tried running the following query in SQL:
SELECT * FROM [VirtualManagerDB].[dbo].[tbl_VMM_Lock] where TaskID='Task_GUID'
but all this gives me is an error that says - conversion failed when converting from a character string to uniqueidentifier msg 8169, level 16, State 2, Line 1
I'm no SQL expert as you can probably tell, but I'd prefer not to deploy another service template in case this issue occurs again.
Can anyone help?

No one else had this?

XML Publisher Template Problem

Hi
This is very basic question as I am new to XML/BI Publisher
I am using templates in iRecruitment for Offers. I am facing problems when I am formatting numbers and uploading the templates.
Problem is when I see the offer letter from Application, it generates pdf with following format
120u000n00 whereas number should be 120,000.00
My number format is as follows
$#,##0.00;
I am using Word 2007 and saving the file as rtf document. Uploading the document to R12.0.4

What is your locale?
<?show-page-total:TotalFieldName;'Oracle-number-format'?>
"BI Publisher supports two methods for specifying the number format:
• Microsoft Word's Native number format mask
• Oracle's format-number function
Note: You can also use the native XSL format-number function to
format numbers. See: Native XSL Number Formatting, page 5-126."
"To use the Oracle format mask or the Microsoft format mask, the numbers in your data source must be in a raw format, with no formatting applied (for example: 1000.00). If the number has been formatted for European countries (for example: 1.000,00) the format will not work."
Is more than one format model being applied? That will cause problems too.

Invoice Template problem - Putting a Header field in repeating Lines rows

Dear experts,
I would be grateful for a problem I am having with an Invoice statement I am developing (Oracle Applications 11.5.10 with BI Publisher version 10.1.3.4). This is very similar to the one in Tim Dexter's Blog (Anatomy of a Template):
http://blogs.oracle.com/xmlpublisher/2007/03/anatomy_of_a_template_ii_heade.html
My requirement is to add a single line into the lines table, as seen in the Blog, which is a COMMENTS field from the header part of the XML and the problem is that it can be 1 line to maybe 5 lines. This is only on the first page. This causes problems as I don't know how to find out how far down the lines table I may be after adding this COMMENTS header field in here, to then know how many lines to loop over to ensure that the lines do not carry on printing over the bottom of the page e.g. if the COMMENTS is 3 lines - how do I know this to then only print 3 minus the maximum lines per page ($lpp) only on the first page?
Any pointers would be of great help.
Many thanks,
Mark

The COMMENTS field I've found out can be of any varible size and include carriage returns. For example, could be:
JD Trx special instructions 010908
FAO: PETER MUSCUTT
REF: FERRY ROAD 2351
========================
INCOME DUE TO COMPANY FOR
THE OPERATION OF EFERRY
ROAD CAR PARK
This causes such problems as being able to know how many lines this field will be, so that I know where to start the first Lines row in the invoice and also how many lines I can put on this first page (starting point - $lpp).
One method I thought would be to count how many characters there are in this field, when it reaches the line size on the invoice, increment a count varible that would be used to indicate the starting point for the first lines record. I would need to compare each character and if it is a carriage return, then increment the count also. This seems quite a heavy wieght way to solve this and would welcome any over ideas.
Thanks,
Mark

Templates Problem in BI Publisher

Hi All,
I was new to BI Publisher, I had installed BI Publisher,BI Publisher Desktop successfully. Created an sql report in Publisher and created a template in MS word. The problem is,I had published the Template for a BI Publisher Report. when I try to view data for the report in BI Publisher using template I was getting following error "The report cannot be rendered because of an error, please contact the administrator".
I had installed the tool just now and worked on that.any preferences I need to set? Please guide me. Any suggestions would be greatly appreciated.
Regards,
Anil.

Hi Anil,
The Same error had occured for me too. I have a temporary solution for this. Check the xdo file of the report, you can find the xdo file from C:\OraHome_1\xmlp\XMLP\Reports\<report folder> (location depends on the installation folder in your machine). in the second line of the xdo file the following link - xmlns="http://xmlns.oracle.com/oxp/xmlp" - should be present. The line should be like <report version="1.1" xmlns="http://xmlns.oracle.com/oxp/xmlp" defaultDataSourceRef="<source>">
Put the missing link in the xdo and generate the report. This error occurs in some machines after saving the report configuration in BIP.
-Stain
Edited by: user11132834 on May 5, 2009 5:25 AM

Mark of the web/template problem

I created three Dreamweaver Templates for my site. I inserted the mark of the web code to each template to allow me to test and preview pages without the pop-up messages. All of my pages are about done and some pages using spry and SWF files weren't previewing properly in IE so I decided that it was time to remove the mark of the web code from the templates. As soon as I tried doing this I got a message about data outside the HTML tag and if I continue changes to pages based on this template will not occur unless you insert the following code .
So I hit continue. I got a couple of other error messages telling me I did something wrong. I went back into my template and typed in the code Dreamweaver told me to enter. I saved the template and got some more errors. I didn't think to copy it all down at the time. So after all these nasty messages I'm not sure what's happened. So I make some changes to a horizontal spry menu and hit save. I get some more error messages about the changes will not affect pages based on the template. I have to cancel out of a couple of error dialog boxes. I load a few pages that were based on the template and see that none of the changes that I made to the spry menu on the template are reflected on the html pages created from the template.
So I go into the template and try deleting all references to the mark of the web code. Then I try changing the CodeOutsideHTMLisLocked="true"--> to "false." That didn't work. Then I tried deleting the entire line  thinking that if I just got rid of all of it that it would fix my problem. No such luck.
So now I start searching online for answers and I see some things about attaching and detaching templates. Okay, so maybe if I detach the template and then re-attach it everything will update. When I follow the instructions to do this I learn that the page is no longer attached to a template. That would explain why my changes in the template aren't updating the other pages. So then I try re-attaching the template. I open the assets panel, click on templates, select the template, and then click apply. Nothing. It won't let me attach a template. Template properties shows no template properties available.
Here is some of the code from of a page based on the template two_column.dwt
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

<title>ONA</title>
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<meta name="Description" content="This page contains images of some of the former employes of Overseas National Airways." />
You can't see it the code I pasted but everything after 1999/xhtml is grayed out and you can't edit it.
So now I'm totally confused and have no idea what I need to do to straighten this mess out.

I thought I'd update this discussion and close it out. The reason why my pages weren't updating was because I
was using a template improperly. I had made the menu editable, which you're not supposed to do. The whole mark of the web issue was unrelated to my problem.

Envelope Template Problem

Similar Messages

Maybe you are looking for