Envelopes do not feed correctly on my HP5610 All in One printer and return addresses get chopped off

I'm running a Windows 8 64 bit laptop and the feeder seems to grab the paper properly but it cuts off part of the return address all the time. I can push it in maybe and inch or so when the feeder starts to grab the paper and this will correct it, but it will cause a jam if it's pushed in too far. It did this on my previous Windows 7 machine as well.

Hello @gttechnic , and welcome to the HP Forums, I hope you enjoy your experience!
I can see from your post that you are running into envelope feed issues. I'd like to help!
I would recommend performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I'd also recommend the document below:
'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing
Even though you aren't receiving this error, the steps should help.
Please keep me posted, and remember, keep your stick on the ice!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused.

I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.

Try deleting the printer, deleting the job queue and reinstalling the printer again.

I can not receive /send fax on my all in one printer

I am not able to send/receive fax from my all in one printer,do any one have an idea as to how it works?

Hi Jopoku,
To try and resolve the issue, please ensure that your phone line source is connected to the LINE port on the back of the unit. If you have a telephone or answering machine that you would like to connect to the unit as well, please connect it to the EXT port. Once these items are confirmed, please click here for steps on setting up the FAX using the operation panel of the unit.
Once the fax has been setup, please follow the steps located here to send faxes, and here to receive faxes. If you still have difficulty sending and receiving faxes, please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have a hp7250 all in one printer and it just stopped printing hp printer says radio not working

i have a hp 7250 all in one printer it just stopped printing my compute says its offline but when i go to pinter and try set up it says cannoct connect then review says raido not working

If that reset did not resolve the issue, and the printout indicates that the wireless radio is not working then there are a few options that we can go through.
First, make sure that through the Setup Menu that the wireless has been enabled and turned on. If these options are not available, you may have to try a differnet reset that I will PM to you.
Also, if the wireless radio is not functional then you might consider connecting the printer directly to the router using an Ethernet cord and reinstalling the printer on your computer using that method of communication.
Let me know! Happy holiday!

HP 3200 All in One Printer and HP Pavillion Media Center TV PC not working

I have down-loaded the proper driver and successfully installed the proper CD (floppy) for the printer and I still can not print either from e-mail or from "LivePix 2.0" software. I think I have worn out my welcome with HP on-line chat support. Would someone please help me make this printer work again?

What happens when you tried to print?
What is your operating system?
How is the printer connected to your computer?
Have you tried printing from notepad or from MSWORD?
Please click on KUDOS if you find my solution helpful.

I have a hp officejet 4620 e-all-in-one printer. I can get it to print, fax but not scan.

Product #CZ152A
Ran scan utility to fix problem
Downloaded driver as requested
Still keeping an error message and won't scan from my computer

What operating system does the computer use?
Is it connected by USB or over a network?
If over a network, what brand and model is the router? Is it wireless or with an Ethernet cable?
Do you receive any error messages?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Hp psc 1210 all in one printer feeding error

I have a model 1210 all in one printer and it will not feed paper. it sounds like something its working, but not gripping the paper. PLEASE ADVISE

Hello @anne0701 , and welcome to the HP Forums!
I can see you're experiencing paper feed issues. I would like to help!
I would recommend performing a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also suggest following the steps in this video on PSC feed issues:
Fixing Paper Pick-Up Issues - HP PSC 1200 All-in-One Printer
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Purchased an HP Photosmart 5520 all in one printer last year and a Macbook Pro in Jan. They worked together up to June. In Sept. when I tried to print wirelessly, it would not print. The laptop had been updated. Tried to update the printer via HP,couldn't

I have an HP Photosmart 5520 all in one printer and a MacBook Pro. Bought the MacBook Pro in Jan 2013 and the printer in Dec 2012. I was able to print to the wireless printer up until June 2013. In September, when I tried to use them together, I could not print. During the period between June and Sept., my laptop software was updated. I have tried to update the HP software on my laptop, but could not. What can I do to use this printer with my MacBook Pro? Please help!

The MacBook Pro is running at least 10.7.

After updating to WIndows 10, I can print but not scan with my HP 2210 all in one

I updated to Windows 10, and since then I'm able to print but not scan with my HP 2210 All-in-one printer. I've tried downloading the software updates but nothing seems to work. Any suggestions

Hi , and I see you are both having trouble scanning after upgrading to Windows 10, and I may be able to help. Most products do have updated software available on HP's support website for Windows 10. I've also seen a few posts that say the Windows 8.1 driver will work for Windows 10 as well, so you could try that too. HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing and scanning problems. I recommend downloading and running the HP Print and Scan Doctor, if it doesn't fix it automatically let me know what errors or messages you receive. Do you know if you are able to scan using Paint? To Scan from Paint: HP Multifunction Printers - How to Scan: Windows 8
(It's the same for Windows 10, from what I've been told)Right-click the Start button () in the lower left corner of the screen, click Search, and then type Paint.Click Paint in the results.Click File, and then click From scanner or camera.Select your printer, click OK, and then click Scan. Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

PAPER NOT FEEDING CORRECTLY

I AM HAVING A PROBLEM WITH MY PRINTER NOT FEEDING PROPERLY...IT STARTS TO FEED AND IT IS NOT GRABBING ON THE ONE SIDE THEREFORE IT IS CRUSHING THE PAPER...IS THERE A WAY I CAN CLEAN THE FEEDERS OR ROLLERS..NOT SURE HOW TO EVEN GET TO THEM

Based on your description @COTTONLIPS, it sounds like there could be something inside the printer preventing the roller from working properly. I suggest watching the following video and completing the recommended solutions presented: Fixing a Paper Jam - HP Deskjet
You may notice the full title of this video is Fixing a Paper Jam - HP Deskjet 3050 All-in-One Printer, but it applies to many of the Deskjet models, including your 2050.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Treloaded. Getting a message "iTunes not installed correctly" Error 7 Windows Error 998. Removed and retried install got same message??????

Trying to install iTunes on my XP machine after the operating system was reloaded. Getting a message "iTunes not installed correctly" Error 7 Windoes Error 998. Removed and retried installgot same message??????

This can sometimes indicate that one of the other itunes-related software components is damaged. (Usually Apple Application Support, but there are other possibilities beyond that.)
Perhaps first try a complete uninstall/reinstall as per the following document:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Does that get you past the 7?

Hello After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

Hello
After upgrading iPhoto 9.1.2 when you synchronize the iphone / iphoto ipad events are not copied correctly (this option checked all the photos on itunes).

I found this other thread discussing this topic, no fix, I will revert to 9.1.1 from Time Machine and wait for a new update.
https://discussions.apple.com/thread/3023160?

Psc 1315 all-in-one printer will not feed paper. There is no paper jam.

psc 1315 all-in-one printer has stopped feeding paper. There is no paper jam.

hi there sorry to learn that you are having this issue.
Are you still facing this issue? If you are I will do my best to help you.
Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer
This is the main support page for your printer, GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
If you are not experiencing this issue any longer, May you let me know, your time and courtesy,
will be deeply appreciated.
Regards;
RobertoR
remember ==▼
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anyth

Since updating my Iphone to ios 8, my hands free in the car (Radiosat) is not working correctly. The phone pairs ok with car, and my phone is recognised but then it cuts off the radio and says that I'm in a call, I can't cancel the call or do anything. I have taken my car to my local dealer but they say the Radiosat is working ok?

Hello there stidhambr15,
I was researching the issue you are having and recommend a couple of things. First it might be a good idea to reset the device following iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting found here http://support.apple.com/kb/ht1430
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't quite get the device going again, I recommend restoring the device.
iTunes: Restoring iOS software
http://support.apple.com/kb/ht1414
Might even be a good idea to turn off the phone, reseat the SIM card, and turn it back on.
iPhone and iPad: How to remove the SIM card
http://support.apple.com/kb/ht5163
iPhone 4 (GSM model)
iPhone 4S
Cheers,
Sterling

As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000 photograph were not catalogued correctly, or hardly at all, so now ov

As being a novice with my Mac Pro computer and Cannon 5D mark 3 camera my issue has arisen while over the last year and half, when down loading into my Photoshop Lightroom 4, my 18,000 photograph were not catalogued correctly, or hardly at all, so now over several months time my photos have apparently been redirected in my libraries and have begun not appearing in their allotted frames next to their number in the library they are in. they also have a small question mark (?) next to the photo space. The frames are blank but indicates that there is a photo there. The majority of photos are blank but about a tenth are seen . i apparently need to retrace where they went but do not know how to get that done . can someone help please?

It would be difficult to tell you where to begin. If you moved photos around to different folders and didn't use Lightroom to move them, that would cause Lightroom to lose track of where they are. You have to remember that your images are not "in" Lightroom. Lightroom simply points to them wherever they are on your computer. All of the location information as well as the changes that you make to your images is stored in the catalog, which is a database. This catalog is central to the operation of Lightroom, and it's essential that you understand how it works and how to make it work for you. For all of those images that have "?" On them, or the folders that have the same, you will have to go through the process of locating them and showing Lightroom where they are located. With 18,000 images, and many of them missing, it might just be easier to start a new catalog and organize things properly from the beginning in that catalog.

Envelopes do not feed correctly on my HP5610 All in One printer and return addresses get chopped off

Similar Messages

Maybe you are looking for