EOIO for IDOCs to XI

Hi,
My scenario is IDOC ---> xi ---> File.
Need to implement EOIO(serialization) for IDOCs coming from ECC.
Checked "Queue Processing" and assigned rule "FIRST_16_OF_MESTYP".
When I send the IDOC using WE19, I get message "IDocs are stored in the queue".
But, IDOCs are not coming to XI. Please help.
Versions: ECC 6.0 & PI 7.0 SPS 13.
Also, do I need to maintain an entry in IDXQUEUE table?

Hi
use similar thread
How to implement IDOC Serialization(EOIO) using IDOC Adapter
Re: Posting idocs in sequence in SAP from file (without BPM)

Similar Messages

EOIO for IDocs to PI

Hi,
My scenario is IDOC ---> PI ---> WS
Need to implement EOIO(serialization) for IDOCs coming from ECC.
Checked "Queue Processing" and assigned rule.
When I send the IDOC using WE19, I get message "IDocs are stored in the queue".
But, IDOCs are not coming to XI.
But when I run program RSEOUT00, its coming out.
Please help.
Thanks and regards,
J Augastine

Hi,
You have to schedule the report in background.
Schedule report RSEOUT00'
Please refer the SAP Note 752194 which talks about the serialization of IDOC taking various requirements into considerations.
Refer this
http://publib.boulder.ibm.com/infocenter/wtxdoc/v8r2m0/index.jsp?topic=/com.ibm.websphere.dtx.packsapr3.doc/tasks/t_pack_sapr3_5_Manually_Creating_Partner_Profiles_WE20.htm

EOIO for Idoc to HTTP

All - can anyone tell me how to ensure EOIO processing in the Integration Engine (PI 7.0 SP16)?
We have queue serialization on and the idocs appear to be coming into PI in the correct sequence but when the process and I check them in SXMB_MONI they are getting out of sequence.
I've confirmed the QoS in the messages is ExactlyOnceInOrder but it does not seem to apply to the IE itself.
Thanks for any help you can offer.
Dennis

I've confirmed the QoS in the messages is ExactlyOnceInOrder but it does not seem to apply to the IE itself.
Check these pre-requisites...if you have not seen them already:
http://help.sap.com/saphelp_erp2004/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm
From the above section:
If this is not the case, the quality of service is automatically changed to EO for compatibility reasons and the message is
processed accordingly.
Regards,
Abhishek.

EOIO QOS for IDOC- PI- Proxy communication

Hi,
We have a scenario where IDOC communication is being used for sending the data to PI and PI does the mapping and routes it to ABAP proxy of the reciever.
In this scenario, we want to ensure the EOIO for one IDOC which means we want all the XML messsages of a particular interface need to be executed in the same queue.
Sender Uses IDOC to send information to PI
PI does the mapping and routes to reciever using XI adapter.
Reciver uses ABAP proxy to execute the XML
THanks,
Prashanth

you need IDoc serialization.
/people/sap.user72/blog/2005/01/28/setting-up-inbound-qrfc-queues-for-serializing-idocs-using-the-idoc-adapter & http://help.sap.com/saphelp_erp2004/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm will help you

How to implement IDOC Serialization(EOIO) using IDOC Adapter

I am sending IDOC from 4.6c to XI to ECC6.0 using IDOC Adapter. I want to ensure that IDOCs are processed serially(EOIO) on the receiver side. I tried setting up the SE16-->IDXQUEUE on XI for the Receiver system and enabled the Queue processing flag on the Receiver communication channel, but the IDOCs are not serialized.
I see that XI is using XBTO_007(EO) Queue. It should be using the queue that I specified in SE16.Please let me know what else needs to be done to implement EOIO for the IDOC adapter.
Please note Sender is 4.6c System while the receiver is ECC 6.0 on WAS>=6.2
Thanks in advance.
Rajeev Gupta

Rajeev,
From http://help.sap.com/saphelp_nw70/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm
<b>The receiver or sender system must be based on SAP Web Application Server 6.40 or higher.</b>
The blog listed above is when you need to sends Idoc from R3 to XI in EOIO. It does not work with SAP R3 4.6C for the reason above.
For sending Idoc's from XI to R3 ( to ECC in your case ) in EOIO, you need to seelct Queue Processing in the Receiver Idoc adapter and the rest I think is handled implicitly by XI.
Regards
Bhavesh
PS: Have not tried this practically though!
Message was edited by:
Bhavesh Kantilal

QoS for IDOC adapter

Hi all ,
what are the QOS available for idoc adapter
Regards,
Tarang

Hi,
Check on this:
<i>The quality of service EOIO (Exactly Once In Order) must be specified in the message header.
The receiver system or the sender system must be based on SAP Web Application Server 6.40 or higher.
If this is not the case, the quality of service is automatically changed to EO for compatibility reasons and the message is processed accordingly.</i>
http://help.sap.com/saphelp_nw04/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm
Regards
Vijaya

Help in creation of XML file for IDOC postings

Hi All,
Need help if anyone has knowledge/experience in creating XML files for IDOC processing.
We need to design an input file (in XML format) for creation of IDOCu2019s for purchase Invoices through Interface.
We have an existing input file, which is working correctly. We are trying to modify this existing input file for a new Tax Code (Non-deductible inverse tax liability). This tax code is working fine for manual postings. But, through IDOC, tax postings are not correctly triggering.
Could you please confirm if any one has experience on this, so that I can share more details for resolving.
Thanks & Regards,
Srini

Hello,
you can use CALL TRANSFORMATION id, which will create a exact "print" of the ABAP data into the XML.
If you need to change the structure of XML, you can alter your ABAP structure to match the requirements.
Of course you can create your own XSLT but that is not that easy to describe and nobody will do that for you around here. If you would like to start with XSLT, you´d better start the search.
Regards Otto

Mandatory Fields for IDOC ORDERS01 for Pricing Condition EDI1 to trigger

Hi ,
I'm Testing an Inbound ORDRSP using we 19 for Pricing Conditions EDI1. What are the Mandatory Fields for IDOC ORDERS01
Thanks

hello,
I think it's better to execute VA01 to create a sales order; in that way you should have an idea of mandatory fields.
Thanks.

MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER

Hi Experts,
How the MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER?
Scenario : when 2nd system create the invoice,it will create a po in the 1st system.
51 error msg we are getting material does not exists.but the material is available in the receiving plant.
Please suggest

If you say the material master is available in the 1st system (where you create the order), then the material number in the IDOC may not match with the material number in your database.
leading zeros. material number stored as alphanumeris instead of numeric.

Business system for idoc reciver communication channel.

hi gurus,
iam doing one file to idoc scenerio.
for defining reciver idoc adapter ,which type of businees system i required that is configured in SLD.
pls guide me .
warm regards.

Hi
You can use th Buiness system as a receiver for IDOC.
Making sure
1. the LS of the system(R/3) is same in the SLD and it is also reflecting in the adapter specific attributes in the ID.
2. Use the same LS name for the BS pointng to FIle in the SLD.
Complete the IDOC configuration from XI
1. Create the RFC dest from XI to ECC
2. Create the Trfc port and call this RFC dest created..
3. Use this Trfc port in the IDOC receiver
On ECC:
Make sure the Partner Profiles is created properly.
it is suggested to use always the business systems when you deal with IDOC and Proxies.
Edited by: Nisar Khan on Feb 27, 2008 1:31 PM

Issue loading Meta Data for IDoc Type WPUKSR01 in XI Integration Repository

Hi,
I want to load the Meta Data for IDoc Type WPUKSR01 in XI Integration Repository out of BI. Unfortunately, this IDoc is not available in the IDoc List. I checked in BI and the IDoc Type is available in WE60 and WE30. Also, I can load the Meta Data for the Idoc in XI ABAP (IDX2).
Can someone tell me why the IDoc doesn't show up in XI Integration Repository Import Object List?
Thanks in advance.
Best Regards.
Alex

Hi Aamir,
The Idoc is released since Release 30A. I also tried to load the IDoc Meta Data from ERP with the same result: it does not show up in the list.
Thanks anyway.
Alex

SA PI 7.1 EHP1 - Support for IDOC Adapter using AAE

Hi,
Can anyone confirm if the SAP PI 7.1 EHP1 supports the IDOC adapter in the AAE ?
Cheers
Colin.

Hi Colin,
I am workinngt on EHP1 PI7.1,but no support for IDoc Adapter in the AAE.
The new features added for IDoc adapter is IDoc packging and new conversion module added .
we have to wait till next release,but not sure...
Regards,
raj

Abstract Interface for IDoc Proxy

Hi All,
Do we need to make Abstract interfaces for IDocs and Proxys too if we want to use them in BPM?
XIer

Aamir,
I agree with u that we can't create proxie's for Abstract interfaces. But consider the case I want to call Proxy inside BPM, is this possible?
Yes its possible. As I mentioned in my previous replies for IDOC's .Similarly for Proxy receiver Interface determination we need to give Actual Inbound Interface name instead of Abstract. MI_Proxy_Abs --> use MI_Proxy_IB . Provided both the interfaces has the same structure.
I hope it clears!!!
Best regards,
raj.

Error : Pre Settings for IDoc inbound processing are missing error

Hi Experts,
There is a CRM job which executes LSMW and I am facing a strange problem during the IDOC posting the error "Pre Settings for IDoc inbound processing are missing error". Can anyone please tell me how to correct this error?
Thanks in advance.
Madhurima.

I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
[iTunes for Windows: "Registry settings" warning when opening iTunes|http://support.apple.com/kb/TS3299]

Function module creation for IDOC processing...

hi Experts,
             i want to create a function module for idoc processing..
message type: zashpmnt
idoc type : shpmnt05
plz tell me which standard FM is used... and tell me what changes i want to do in it....
Tnx in Advance..

Hello,
         If you are trying to process an Outbound IDoc for the SHIPMNT05 IDoc Type with an Extension, you can use the IDOC_OUTPUT_SHPMNT Function Module which is assigned to SHPM Process Code.
       In Addition, since you have an IDoc Extension, you are required to populate the Custom Segment / Fields. For this, there is a Customer Function / Exit called EXIT_SAPLV56K_002 which you can use it for adding your Custom Segments to the IDoc ZSHPMNT05.
       If you are writing code in this exit, make sure to create a Project in CMOD.
       Also, ensure that you've made the assignment in WE82 with the Message Type , IDoc Type & the Extension.
       For Inbound, if you would like to Create a Custom Function Module, you can follow the Naming Convention Z_IDOC_INPUT_SHPMNT for which you are required follow the below Steps.
1. Register the FM as Inbound FM in BD51 T-Code.
2. Assign the FM to IDoc Type & Extension in WE57.
3. You'll need to Create a Custom Process Code in WE42 in which you are required to make add your FM.
4. Maintain Partner Profiles in WE20.
5. Have the Process Code Migrated to the Testing Environment as creation of Custom Process Code is a Customizing Activity and it requires a Customizing Request to be created / Migrated.
6. Define the Parameters as defined in the Standard Inbound Function Modules such as IDOC_INPUT_ORDERS , IDOC_INPUT_DELVRY etc.
Thanks and Regards,
Venkat Phani Prasad K

EOIO for IDOCs to XI

Similar Messages

Maybe you are looking for