EPMA for Planning & HFM

Hi All,
I have a requirement where by I have to create Dimensions for HFM and Planning via EPMA. Now my question is how do i do it?
I used the EPMA generator excel facility to generate a ADS file to be loaded to EPMA. But now it carries all the properties which planning application carries. Now since most of the members and dimensions are same on HFM I want to share those members across applications.
But would I have to set the properties on HFM manually or do I have a way to import the file for HFM as well.
If so does it mean I have to import it twice?
Please let me know your views and suggestions or alternatives on the same?
Cheers

HI Graham,
I have a question here. I have an ADS file which is for HFM which I load and it loads to the master library. Now for planning I have another ADS with planning set of of properties and with different hierarchy as I have in HFM.
How do I solve this issue through import as it overwrites the existing hierarchy. Is that the application view for HFM and Planning needs to be created manually? Also how does the properties like dynamic calc and other planning attributes show up ?
Cheers

Similar Messages

  • Hardware recommendations for Planning & HFM

    We currently have Hyperion Planning 11.1.1.3 running on three servers (one dedicated for RDBMS, one dedicate for Essbase, and another that is running everything else (EPMA, Planning, Financial Reporting, Shared Services, Workspace, Calc Manager, etc).
    We are going to implementing HFM and upgrading to 11.1.2 for our current components and I have reviewed the server sizing for 500 users (175 active) for Planning and HFM. I was wondering if anyone had any experience running both Planning and HFM together and if I need to bump up the server specs for anything to run both smoothly?
    The EPMA Installation Start Here recommends the following for Planning for Windows Servers:
    Web Server: 4 x 3 GHZ+ 16 GB RAM
    Essbase Server: 4 x 3 GHZ+ 8 GB RAM
    Other Services Server: 4 x 3 GHZ+ 16 GB RAM
    RDBMS Server: 4 x 3 GHZ+ 16 GB RAM
    And recommends for HFM:
    Web Server: 4 x 3 GHZ+ 16 GB RAM
    Financial Management Server: 8 x 3 GHZ + 16 GB RAM
    Other Services Server: 2 x 3 GHZ + 8 GB RAM
    RDBMS: 4 x 3 GHZ+ 16 GB RAM
    The Essbase server for Planning will be dedicated, and the Financial Management Server for HFM will be dedicated, but if we wanted to share the Web Server and Other Services Server for both Planning and HFM, do you think we need to size these servers a bit more robustly to handle both HFM and Planning?
    We are looking at 8 x 2.66 GHZ with 32 GB of memory for our Web Server, Other Services Server and Financial Management Server (essbase and RDBMS are sized fine for now), so I just wanted to get some input from the community before we make the recommendation to go ahead with that hardware.
    Thanks!

    Depending upon your Essbase/Planning Application you might need to increase the Ram. Remember you plan the architecture for 3 - 5 years in mind. Its a good practice to have variable like number of users increase per year, new applications, evolving data-set etc into consideration.
    In one of the post, one of the expert suggested to have 2Gb per essbase application.
    HTH
    MN

  • EPMA for Planning

    If I create a planning app in EPMA, can I bypass EPMA for building dimensions and just use Essbase load rules to build the dimensions?
    Jz

    Just to expand
    The metadata is stored in the Planning/EPMA relational database and when you do a refresh database .... your essbase metadata... e.g dimensions gets overwritten
    PD

  • Using common shared services for Planning & HFM

    Hi All,
    I've already installed Planning and shared services in one server. Now i would like to install HFM on other server, but would like to use the shared services on the first server. In this case, during the installation on the second server, do i need to uncheck the Foundation services ? What other products that i've to uncheck. How about Reporting & Analysis Framework ? Pls. advice
    Thanks,
    PVR

    You will need to only carry out the following step in regards to foundation on the HFM server
    "When you configure in a distributed environment, you must configure the Shared Services database on every machine. On the first machine, you are setting up the Shared Services Registry. For configurations on subsequent machines, choose “Connect to a previously configured Shared Services database.” In this case, you are letting the machine know the location of the Shared Services Registry."
    Then configure the HFM components.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Hardware recommendations for Planning & HFM (moved to Infrastructure forum)

    Moved to the EPM System Infrastructure form
    Edited by: Steve on Oct 12, 2011 10:51 AM

    Depending upon your Essbase/Planning Application you might need to increase the Ram. Remember you plan the architecture for 3 - 5 years in mind. Its a good practice to have variable like number of users increase per year, new applications, evolving data-set etc into consideration.
    In one of the post, one of the expert suggested to have 2Gb per essbase application.
    HTH
    MN

  • Planning & HFM Certifications - Advice Appreciated

    Hello All – For those on the board that are certified Hyperion professionals (Planning and HFM). I’d really appreciate your input as to the value of these certifications both from the perspective of
    1) Getting onto projects
    2) Being able to perform on the project. Does studying for and completing the certification provide you with the skills to be successful on projects.
    I’ve currently been using Planning since 3.0 but don’t have the certification. My knowledge is functional - not a developer.
    I’m also looking at getting the HFM certification as well but have never used this tool so I’m wondering if it’s worth getting since I’d like to get onto these types of project.
    I do have an accounting background and understand consolidation etc.
    Any advice would be very much appreciated.

    Hi,
    I will agree with that point only in 50%.
    You are talking about 3 different situations:
    1. When You are a technical administrator
    2. When You are a business administrator or a Planning/HFM user
    3. The most important: when You are a consultant
    You can use planning or HFM for 5 years and have no knowledge about the system.
    I see that kind of situation when I go to customers (accontants,managers and so on) and they have no idea how exactly system is working. In example what is the difference between Contribution Total and Parent Total. How to put data correctly. How to set correct POV.
    Study for cert gives You a huge knowlegde and understanding how system is designed.
    I'm not saying that it gives You everything. I'm saying that it really helps You to understand the system.
    If you have such kind of possibility try to prepare Yourself for cert.
    regards
    Karol
    i.e.
    Try to answer for this question:
    Which standard dimension provides an audit trail of the transformations applied to Hyperion System 9 Financial Management data?
    A. Entity dimension
    B. Period dimension
    C. Account dimension
    D. Value dimension

  • Planning, HFM Problem throught Worspace

    Hi,
    I was intalled the Hperion Planning, HFM (both 9.3.1) in my server(windows 2003) and the Sharedservices & Workspace 9.3.1 also on the same server and deployed with Oracle Application Server 10g 10.1.3.1, I am able to open the workspace but while trying to create planning application or trying to open HFM application I am getting the error like
    Please make sure that the Application you are trying to launch is registered with SharedServices.Shared Services must be running for the feature you are trying to access.Close the current browser window and try logging into workspace again after a little while.Contact your administrator for further information.
    I have created the Projects undre the SharedServices and given the sufficiante privialges.
    Please help on this. Thanks in advance.
    Regards
    KumarK

    Hi,
    Try starting up just the following services
    Hyperion S9 OpenLDAP
    Hyperion S9 Shared Services
    Hyperion S9 Apache 2.0
    Hyperion S9 Planning
    Hyperion S9 BI+ 9.3 Core Services 1
    Hyperion S9 BI+ 9.3 Workspace
    And maybe the essbase service, then try logging into the workspace and accessing planning, do you still get the message ?
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • User exit/ badi needed for planned order create/change,collective ATP check

    Dear All,
    I'm looking for a user exit/ badi which can be used for planned orders at the stage of
    mass collective availability check (COMAC tcode) update; or at some other relevant stages of mass update of planned orders.
    I need after collective availability check to perform the following:
    1) to copy date from "total comitment" field on header tab of planned order and paste it (replace old date) to order finish date on header screen
    then
    2) to start a scheduling.
    Very appreciate your help.
    Best Regards,
    Andrey
    Edited by: Andrey Kruglov on Apr 15, 2010 3:06 PM
    Edited by: Andrey Kruglov on Apr 15, 2010 3:07 PM

    Dear,
    Use the BAPI : BAPI_PLANNEDORDER_CHANGE
    Or use the function module MD_SET_ACTION_PLAF for Schedule planned order.
    and the transaction MDAC Execute action for planned order
    This function module includes the following actions:
    Explode BOM
    Explode BOM, check availability
    Check availability, only explode BOM in the case of a requirement
    Check availability, do not explode BOM
    Reset availability
    Change planned order data
    Schedule planned order
    Delete planned order
    Assign the key for the respective action control to the materials in the material master (MRP 4 view).
    Please refer this thread,
    Re: MDVP for collective orders
    Regards,
    R.Brahmankar

  • PS: BAPI For Planned Progress and Actual Progress

    Dear All,
                  Is there any BAPI available for Planned Progress and Actual Progress for PS Project.
    Regards,
    Sohail

    Hi,
    Try using this report s_alr_87013532.
    Also for planned and actual progress the table is rpsqt. Could not find any bapi for the progress
    Regards
    Hiren K.Chitalia

  • Is there standard report for planned and actual devlivery date?

    Hi Guru,
    Could you help me to find standard report to compare planned delivery date in PO and actual delivery date (GR Posting date)?
    I wonder, Is there standard report for planned and actual delivery date?
    or I have to create a customizing report.
    Thank you very much.

    hi
    i dont think it is possible to see both in one pan so try to create some Z report
    u try ME80fn here u have to change the views ,in del shedule view u can see the delivery dtae and in PO histry view u can see the posting date
    regards
    kunal

  • Variance report for planned vs actual 261

    Hi Experts,
    Is there a variance report for planned v/s actual raw material consumption for an order when the order is still running? I mean when only the partial quantities are confirmed (PCNF, PDLV)?
    Regards,
    Sachin

    Hi,
    Always the plannig is done for ordered quantity and the actual quantity is what actually used.
    Pl. use T code CO02/CO03 - Goto - Cost Analysysis, you will get the details which you are looking for. If the layout doesn't suits your requirement, change layout with change options.
    Madhava

  • Tcode for planned production  and actual production

    Hello,
    I am working with a report I want to check the values with R/3 for Planned Production and Actual production. Does anybody have any idea how to check?
    Thanks in advance

    Hey Suman,
    i have the same problem, did you find a solution?
    thanks

  • Report for Planned Delivery Costs

    Hi,
    Is there any Report for Planned delivery costs per month/day.One of our client needs separate report for frieght charges so that he can be able to pay service tax (GTA) for the same.
    Thanks
    Prasad

    Hai,
    Did you check thro' Tcode MIR5.

  • Questions on Commands for planning application

    Hi,
    1. Where can i get the information on commands for planning functions?
    2. What is the difference between
    ---Execute planning function simple and -
    Execute planning function
    3. I create planning layout with few buttons
    a. Copy: I clicked on the copy button and can see the data in the layout
    b. Save: Clicked on the save icon, Data saved into the planning cube
    c. Change. : clicked on the change and changed few values and then clicked on SAVE button. Data got saved into my planning cube.
    Now I my requirement is when user open the planning layout, It should only be in display mode. But currently automatically all the keyfigures are in change mode (Is it because in query designer, I checked "Start query in the change mode?)
    When user opens the planning layout, he should run the copy function, then should save the data into the planning cube and then should be allowed to chagne. Change button should be in active until data is saved into the plannigng cube. IS this possible?
    Thanks
    Annie

    Hi Deepthi,
    Thanks for your reply.
    I did as you mentioned and its working as expected.
    User wants something like this
    1. Execute the planning layout.
    2. Click on the copy function
    3. Save the data
    4. Click on the change button so that data can be changed now.
    As per your solution, without have change button its working perfectly. But now i want to have change button on the layout. Initially change button should be disabled. When i save the data then it should get active.
    I did the following things but didnt work
    1. Save button i have two commands
    a. Save data
    b. Set_item_parameters
    2. Change button> disable>set_data_entry_mode.
    After executing the layout. I could copy the data and save it. BUT after saving it change button is not getting active.
    I think i did do something in save button (B). I just mentioned button group but didnt mention the change button. Can you please help me?
    Thanks
    Annie

  • Getting an error while activating a planning area "Enter values for planning horizon From and planning horizon To for the storage time profile level"

    Dear S&OP community,
    I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
    This what I did...
    1) Created new attributes and master data objects and activated them successfully.
    2) Time profile created and activated successfully
    3) Trying to create planing area by assigning  time profile in step 2 and assigned master data from step1..Unable to save the data and system returns 
    this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
    My understanding is time profile needs to be active  but doesn't have to have values...
    Any help is appreciated.
    Thanks,
    Krishna

    YS,
    Here are my time profile settings
    Level       Name          Display Horizon - Past  Display Horizon - Future
    1             Monthly     -6                                       11         
    2             Quarterly     -2                                       3
    3             Yearly        -1                                       2
    Time profile is active and but time profile data is not loaded
    Thanks,
    Krishna

Maybe you are looking for