EPrint Job Status Notification Email Customization

Dear All HP experts,
I am new to this eprint service, i just purchased a hp printer with model Deskjet Ink Advantage 4615, after i setup it properly, now i am able to send email to the printer, after the printer receive the email print job, it will return a email message to my email account with subject "ePrint Job Received" if success print the email or "ePrint Error" if incase failed to print the email.
However, i have a business need to customize the email subject and also email body for the notification email that i received, when i send a email that contain PO with number 00000123 to the email printer, it should be able to return me the alert email with subject that contain my PO number as well, so that i can recognized whether my PO is successfully print or not and also for record keeping.
Can I know whether this is possible to done or can't be done? Any help from HP experts are highly appreciated.

Hi Kklee,
I understand that you want to customize the notification email you receive after sending an ePrint job. I am sorry there is no way to customize the notification email.
Hope this helps.
**If you find this helpful or want to say thanks make sure to click the white star under my name to give me Kudos. **

Similar Messages

All off a sudden I get waiting for job status notification on a package that has worked for years

Does anyone else have this problem, the package in question is Adobe CS 5.5, this package as worked for years all of a sudden the OSD, gives
waiting for job status notification and hangs forever on the installation of Adobe CS 5.5
If I run the batch file manually that I am using in the SCCM package for Adobe CS 5.5
it works perfectly, but when part of an OSD I now get waiting for job status notification.
Any advice would be great.

Hi,
I recommend you check the following log files on the client.
AppEnforce.log
It records details about enforcement actions (install and uninstall) taken for applications on the client.
execmgr.log
It records
details about packages and task sequences that run.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

"Waiting for job status notification" holding up OSD TS

I have come to another roadblock.
I am getting the above message when I try to run my TS, it is a .vbs file written by someone else (I dont know .vbs and have no way to troubleshoot it, but it was working fine and has not been changed)
I have 4 differend models of laptops that get hung up on the exact same step of the TS every time, and they are all running a different .VBS
They are all Lenovo laptops, and the TS Step is installing the proprietary Lenovo applications.
Script looks like this
set oShell= CreateObject("Wscript.Shell")
set oEnv = oShell.Environment("PROCESS")
oEnv("SEE_MASK_NOZONECHECKS") = 1
'Copy all drivers to the local driver folder
set filesys=CreateObject("Scripting.FileSystemObject")
If filesys.FolderExists(".\hprotect") Then
   filesys.CopyFolder ".\HPROTECT", "c:\drivers\HPROTECT",True
End If
If filesys.FolderExists(".\PWRMGR") Then
   filesys.CopyFolder ".\PWRMGR", "c:\drivers\PWRMGR",True
End If
If filesys.FolderExists(".\Hotkey") Then
   filesys.CopyFolder ".\Hotkey", "c:\drivers\Hotkey",True
End If
If filesys.FolderExists(".\video") Then
   filesys.CopyFolder ".\video", "c:\drivers\video",True
End If
If filesys.FolderExists(".\fingerpr") Then
   filesys.CopyFolder ".\fingerpr", "c:\drivers\fingerpr",True
End If
If filesys.FolderExists(".\rapidbt") Then
   filesys.CopyFolder ".\rapidbt", "c:\drivers\rapidbt",True
End If
If filesys.FolderExists(".\commutil") Then
   filesys.CopyFolder ".\commutil", "c:\drivers\commutil",True
End If
'Install Drivers from local drive
'T530-win7
oShell.Run "c:\drivers\video\setup.exe -S",0,True
oShell.Run "c:\drivers\Fingerpr\setup.msi /q /norestart",0,True
oShell.Run "c:\drivers\HPROTECT\setup.exe -s -v""/qn REBOOT=ReallySuppress""",0,True
oShell.Run "c:\drivers\rapidbt\setup64.exe /s /v""/qn REBOOT=ReallySuppress""",0,True
oShell.Run "c:\drivers\Hotkey\setup.exe /S",0,True
oShell.Run "c:\drivers\PWRMGR\setup.exe /s",0,True
oShell.Run "c:\drivers\commutil\setup.exe /SP- /VERYSILENT /NORESTART /SUPPRESSMSGBOXES",0,True
oEnv.Remove("SEE_MASK_NOZONECHECKS")
If I try to run the .vbs files manually it gives error
Path not found
Line 10
Char 4
800A004C

Extract the exe files to give you the actual drivers. Then import them and create the driver packages. Trust me, it will be much easier to manage in the long run. You can see how to do it here:
http://www.gerryhampsoncm.blogspot.ie/2013/02/sccm-2012-sp1-step-by-step-guide-part-9.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

EPrint servers accept jobs from some email addresses and NOT others

I have an HP Photosmart Premium C410b which works a treat apart from when I try to use ePrint. I use my own (register.com hosted) domain email address for nearly all of my email. And when I send emails to @hpeprint.com I get the following bounce back :
Delivery status notification
We're sorry; your message to "[email protected]" has failed. The recipient's mail server responded with: "Diagnostic-code 550 - (5.7.1 Command rejected)". Please check the recipient's email address for typos or unnecessary spaces and resend. Thank you.
So then I added my backup googlemail account as an 'allowed sender' and it works perfectly. I have even tried to do this with 'everyone' allowed to send to hpeprint still same problem. (i.e.. works for @googlemail.com but not my main personalised domain email).
It sounds like the hpeprint email server / firewall is rejecting my personalised domain email address. Has anyone else experienced a similar problem.

Hi all,
We are aware of this issue and are working on a fix to implement in the near future.
This is because some of the email from some certain are incorrectly identitifed as spam mail by the server.
Thank you for your patience.
I am an HP employee
**** Please mark the post that solves your problem as "Accepted Solution" ****

Job Status emails not being sent

Hello,
I'm hoping to find some help here after searchs of the forum and google did not find a solution.
Since yesterday I ceased receiving "Job Status" email messages when I use ePrint. The jobs do print on my HP Officejet Pro 8500A, and the "Recent Print Jobs" list in the ePrintCenter is up-to-date. I made sure that under "ePrint Settings" (on the ePrintSenter webpage) all the little boxes near the allowed sender's email addresses are ticked, indicating that job status emails should be sent. I tried restarting the printer - all without any change.
The only thing I changed yesterday was to install the "HP Printer Control" app on my iPhone and start using it. Interesting the ePrint job list there is empty...
I really like getting these verification emails. Is there any way to repair this?
On a separate topic - is there a limit to the number of allowed email addresses in the "allowed senders" list in the "ePrint Settings" section in the ePrintCenter? Is seems to save only 3 addresses.
Thank you for any help,
Danny
This question was solved.
View Solution.

Currently HP is in the process of migrating from ePrintCenter to HP Connected, through this migration some of their services may change or no longer exist. At this time those status emails are not a feature of the service. This does not mean that it will not be re-added in the future, but I cannot make any statment verifying if this will or will not happen. I apologize for the inconvenience that this might cause, but you should be able to still see the job status by visiting the website itself.
Let me know if this is the information you are looking for and I will get right back to you as soon as I can!
-Spencer
PS have a wonderful day and a fantastic weekend!

Notification Email/Alert - Including Job execution details(step output)

Hi,
I am using Oracle 10g R2 GRID Control on Windows. I would like to add the execution details to the default notification (Long)emails. Is there any possibility without adding any code in current version or later version to include step output(failed/Passed details)?
Thaks for your help.

I am already getting notification email/alert with just status failed/succeded. But I want to include the step output(job execution details) to that default email given by Oracle. I could write PL/SQL block to manipulate this,but looking for default way to include these details in any version?

How to customize SharePoint Foundation 2013 workflow notification emails

We have a SharePoint Foundation 2013 workflow that sends emails when certain criteria are met. We have tried to customize the emails using SharePoint Designer, but the emails that are received are different.
Ho do we configure SharePoint to send the emails formatted as we specified in the workflow?
The emails we receive are all formatted like this:
Subject:
[Company Name Workflow] - [Item] has been assigned to you
Content:
Task assigned by [User Name] on [Date].
To complete this task:
1.   Review [Item].
2.   Perform the specific activities required for this task.
3.   Use the Open this task button to mark the task as completed. (If you cannot update this task, you might not have access to it. Click here to request access.)

Hi,
According to your post, my understanding is that you want to customize SharePoint Foundation 2013 workflow notification emails.
We’ll need to do a few things to replace SharePoint’s default notification with our own. The first thing we need to do is turn off SharePoint’s default notification. On the Workflow Tasks list, go the Advanced Settings and select
No for Send e-mail when ownership is assigned. Then we need to create workflow to send email.
There is an article for your reference, although it is about the SharePoint 2007, it still works for SharePoint 2013.
Create a Detailed Custom Task Notification with a SharePoint Designer Workflow
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How do i stop the emails "eprint job received"

how do i stop the emails "eprint job received"?

Hope you a having a great day,
Are you still experience this issue. If you are, I will do my best to assist you.
Go to this article if should explain how to manage your apps GO HERE
If you are not experiencing this issue any longer you may disregard this post, although I will deeply appreciate if you can take I little bit of your time and let me know.
Let me know if I can assist you further;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Recently ordered an unlocked iphone 4s on Nov. 24th. However, I have yet to receive a shipment notification email. Status of order has been on processing items for a week now. Anyone know how long it generally takes to receive shipment notification?

I recently ordered an unlocked iphone 4s from the apple store online on Nov. 24th. However, I have yet to receive a shipment notification email. The status of my order has been on processing items for a week now. Does anyone know how long it generally takes to receive shipment notification?

Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

Create Upgrade Evaluation Site Collections Timer Job does not send notification Email when the Site is created

Hello Everyone,
My problem is:
The Create Upgrade Evaluation Site Collections job does not send a Notification Email when the Eval Site is created. I only get a notification E-Mail that mention that a Upgrade Evaluation Site Colletion is requested and then after 27 Days that the Evla
Site will be deleted in three Days.
My Enviroment:
SharePoint Foundation 2013 Sp1 on Windows Server 2012
Exchange 2010 SP3
I hope someone can help.
best regards
domschi

Hi domschi,
As I understand, you didn’t receive email generated from Create Upgrade Evaluation Site Collections timer job. While you might receive email generated from Delete Upgrade Evaluation Site Collections.
When you request an evaluation site collection, the request is added to a Timer job
which runs once a day. You will receive an e-mail message when the upgrade evaluation site is available. This might take up to 24 hours. The message includes a link to the evaluation site. Upgrade evaluation site collections are set to automatically
expire (after 30 days by default).
Please go to CA > Monitoring > Review Job Definitions, locate issue timer job and click Run Now. Then go to Job History and check if the issue job failed to run.
Also, please check if the email are received by Exchange Hub server.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

I am receiving emails fine but people sending emails are getting "This is an automatically generated Delivery Status Notification."

So people sending me emails are getting this notification even though I am getting all of their emails.
This is an automatically generated Delivery Status Notification.
Delivery to the following recipients was aborted after 1 second(s):
* [email protected]
Reporting-MTA: dns; resqmta-po-10v.sys.comcast.net [96.114.154.169]
Received-From-MTA: dns; resomta-po-03v.sys.comcast.net [96.114.154.227]
Arrival-Date: Fri, 13 Mar 2015 00:11:39 +0000
Final-recipient: rfc822; [email protected]
Action: failed
Status: 5.1.1
Diagnostic-Code: smtp; 550 5.1.1 Recipient address rejected: {Gateway}
Last-attempt-Date: Fri, 13 Mar 2015 00:11:40 +0000
Received: from [10.0.0.4] ([174.63.66.5])
by resomta-po-03v.sys.comcast.net with comcast
id 2oBe1q00S06oTie01oBfmR; Fri, 13 Mar 2015 00:11:39 +0000
X-Authority-Analysis: v=2.1 cv=brXCBSqi c=1 sm=1 tr=0
a=d75dIf30LeQD1RLuRZUoGw==:117 a=d75dIf30LeQD1RLuRZUoGw==:17 a=C_IRinGWAAAA:8
a=GGcpBh7Jt_oA:10 a=73ab78M7B2EA:10 a=r77TgQKjGQsHNAKrUKIA:9
a=9iDbn-4jx3cA:10 a=cKsnjEOsciEA:10 a=gZbpxnkM3yUA:10
a=6BrDaJ5WXvREvQ-J4T4A:9 a=QEXdDO2ut3YA:10 a=jHBHo6-IVdtYVL4fa8AA:9
a=_W_S_7VecoQA:10 a=qOu-Zh59HcEA:10 a=AfkkXffo6PgA:10 a=2rOyub8MfPoA:10
a=MPPUs8NNPK4A:10
Message-ID: <[email protected]>
Date: Thu, 12 Mar 2015 20:11:31 -0400
From: Michael Hamilton <[email protected]>
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Thunderbird/31.5.0
MIME-Version: 1.0
To: [email protected]
Subject: test
Content-Type: multipart/alternative;
boundary="------------050909070108050106030501"

I have sent you a test message.
added: I got the same Notification from Comcast. If you go to the comcast website, is there a place to request an 'out of office' or 'vacation response'? If so, is that turned on?
Did you receive my email?

Customize Notification Email

Hello,
The notification email is typically printed and used. Can the format of the email be modified? The email has a graphic on it -- can it be removed?
Can a custom notification email be used?
Thanks.
--Rich Ota

Hi;
The only customization available is on the "Notifications" section of the Options tab allowing you to change the Subject and Message and define whether you want the data and blank fields included. Any other graphics etc added to the Notification email cannot be changed.
Thanks,
Josh

Customize Embedded OAF region in WF notification email

Hi All,
I have a requirement as below:
There is a notification email that has an embedded OAF region. All this is oracle seeded. This region has many other regions like
MainRegion
-- Region1
-- Region2
-- Region3
Now I would like to not show Region2 in the emails. How do we do this.
I tried to personlize the region and make the Rendered property to false for region2. This is working fine if I see the notification from the Oracle Applications Self-service login.
But the email(which comes to say yahoo mail) which has this as embedded region still shows all the regions(including Region2 which I had set not to render through personalization).
Is there a way to achieve this. If so, any pointers.
Thanks,
Anand

Hi Anand.
Thank you for replying. We have 2 notification changes that we would like to implement, OIE Expense Report Approval notification and Requisition Approval notification. On both notifications, we would like to display 2 segments of the GL code associated to the line - cost center and business unit. As I mentioned in my previuos email, I was able to add those columns in both notifications by extending the VO (OAF), then doing personalization. However, we can only see those columns displayed when we are viewing the notification from the worklist, that is within Oracle Applications. The notification that comes through the email does not show those columns we've added. What other area should we be changing to make those columns display on the email notification? How come the new columns show on the notifications in the worklist, but not in the email?
Best Regards,
Narissa

Modifying subject line on each Notification email

I'm using Adobe forms to create work orders for our internal studio. When we submit a work order, it sends a notification to the appropriate party which is great. however it always defaults to the generic subject line which we have as "work order request" right now. It makes it difficult to track the requests in email with all of the requests having that same generic subject line. Does anyone know if there is a way to modify the subject line of the notification email on a job by job basis, so we could put the job number in each individual notification? Thanks.

Hi,
Yes, you can modify the generic subject line of the notification emails.
Click on Options- Email notifications- Customize the subject line as per your choice.
Regards,
Nakul

What are the attributes available on Task Status Notification?

Hi,
I need to send the information below when a task is completed or rejected. So I would like to know if they are available. I think so because I've got them from Task Status Notification (OIM standard email definition). If not, what are the attributes available on Task Notification?
<Tasks.Task Name> is <Task Details.Status>.
<Task Details.Status>
<Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
Thanks,
Renato.
Hi,
I have implemented some java code to workaround the problem below... But I don't believe this does'n work in OIM :-):-):-):-) Please, tell me if you are using task status notification in OIM and if your email defintion has the variables below.
Thanks,
Hi,
One of OIM email templates is Task Status Email Notification. I am trying to notify the user (Notification tab) using this template but it didn't work. Even when I set the Object Name and Process Name values for an email definition, it does not work.
How have you implemented task status notification in your workflows? I think if this template exists in OIM, by default, so it is posible to have the information below during notifications.
I think I'll have to call Oracle's Support.
=======================================================
Subject: Process task <Tasks.Task Name> is <Task Details.Status>.
Body:
The Process task <Tasks.Task Name> is <Task Details.Status>.
The details of this process task are as follows:
Process Task Name: <Tasks.Task Name>
Process Task Status: <Task Details.Status>
Resource Name: <Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
=======================================================
As I've said, the e-mail was sent but in blank:
The Process task is .
The details of this process task are as follows:
Process Task Name:
Process Task Status:
Resource Name:
Target User: []
Assigned to: []
Response Code :
Response Description :
Error Details :
Is it possible to have those fields available on notifications?
Thanks,
Edited by: Renato.Guimaraes on 23/10/2009 08:05
Edited by: Renato.Guimaraes on 24/10/2009 15:57
Edited by: Renato.Guimaraes on 26/10/2009 13:31
I didn't get any answer until now.. Below it is what I've done.
a) Create an entity adapter that is assigned to the post-update of the Specific Task Info data object.
b) Select the task information searching by SCH_KEY, for example (I have to do more tests)
SELECT
sch.sch_key, sch.sch_status, sch.sch_note, mil.mil_key, rsc.rsc_data, rsc.rsc_desc
FROM
osi, sch, mil, rsc
WHERE
mil.mil_key = osi.mil_key and
osi.sch_key = sch.sch_key and
sch.sch_key = ? and
rsc.rsc_key = osi.rsc_key
c) Load the e-mail definition template and replaces the fields
d) Sends the e-mail
With that I solved another problem: I have to send an e-mail always the assignee adds a note to the task.
Edited by: Renato.Guimaraes on 28/10/2009 08:51. How I did that
Edited by: Renato.Guimaraes on 12/11/2009 12:19
Edited by: Renato.Guimaraes on 13/11/2009 07:22 Changed the Thread Subject

Hi Experts,
I want to extend my doubt a little more.
I have a requirment as below.
User will enter a range of Date say 01.06.2011 to 25.06.2011.
I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
can i achive this without using Customer Exit.
Regards
Laxman

EPrint Job Status Notification Email Customization

Similar Messages

Maybe you are looking for