Epson R800 CD for Manual Tray Selection "Gone now"

How do I print CD's on my Epson R800.
You normally select:
1. Print
2. Manual Tray
3. CD settings and print.
Now the other printer selections have disappeared.

You first have to use the Page Setup dialog to choose a paper size that offers a manual feed option. (For CDs on the R800, that's "A4 Manual Feed.")
Then, when you're in the Print dialog, the relevant manual feed settings will become available.
Incidentally (and as reported on another thread) I just got an email from Epson saying they will have an updated option for printing CDs under Leopard available for download by the end of the week, so you might want to keep checking the Epson website. Good luck!

Similar Messages

  • Smart form dynamic tray selection on printing

    Hi Experts,
    I have a requirement in smart form that need to output the a particular invoice to a particular tray a printer. For e.g. tray 2.
    I have added TRY02 to the resource name of the pages in the smartform, but still the invoice is being printed to the default tray of the printer.
    I have done a test to that printer by printing the SAPCRIPT-TRAYTEST from SO10, and the output is being printed correctly i.e. to the different trays. So I guess the printer has been configured correctly.
    Is there any additional configurations that need to be done for smart forms for the tray selection works correctly? And, is it correct the way I implemented the functionality in the smart form?
    Can someone help please?
    Thanks in advance
    Regards,
    Zaheed

    Hi Experts,
    I have a requirement in smart form that need to output the a particular invoice to a particular tray a printer. For e.g. tray 2.
    I have added TRY02 to the resource name of the pages in the smartform, but still the invoice is being printed to the default tray of the printer.
    I have done a test to that printer by printing the SAPCRIPT-TRAYTEST from SO10, and the output is being printed correctly i.e. to the different trays. So I guess the printer has been configured correctly.
    Is there any additional configurations that need to be done for smart forms for the tray selection works correctly? And, is it correct the way I implemented the functionality in the smart form?
    Can someone help please?
    Thanks in advance
    Regards,
    Zaheed

  • Tray selection of printer doesn't work with printing order confirmation

    Hello,
    When we try to print output for the order confirmation document (BA00 and custom ZBA0) on a different paper tray (e.g. tray 2 for printer avbekyo-01_tray2 in SAP R/3) then the ouput is printed to tray 1 in stead. We have defined two different printers in SAP for the tray selection. We tested the ouput on different printers, besides the avbekyo-01 and went wrong on the others also. When we print out an invoice (ZRD0) to the printer on the second tray, the invoice is printed correctly from the second tray. With an ABAP developer we debugged the print process, but no code leads to the fact that the output for the order confirmation should be printed to the first tray, while the second tray was selected in the output record. In the code still the second tray is processed, but printed on the first. The only difference we can find is that the order confirmation is SAPScript and the invoice is a Smartform. Does anyone know a solution?.
    Kind regards

    Unfortunately the setting doesn't resolve the problem. We also have activated the settings of Tray2 in the option Tray Info.
    Edited by: Chantal Polman FUNC ACCOUNT on Jun 4, 2008 2:32 PM

  • Manual routing selection in REM.

    Dear Gurus,
    Is there any configuration settings for manual routing selection in REM ??
    Regards,
    Pradeep

    Dear Pradeep,
    Why do you want to select the Rotuing manually?
    Once if your Product has got 2 different routing ,it might be
    because of Shop Floor constraint or for costing purpose,after
    creating a new routing,you have to create a Production version
    for a combination of Rate routing And BOM.
    After that you have to create a Product Cost collector using the
    new Production version and create a preleminary product cost
    estimate for the product cost collector and save.
    If You want to decide at that time of production
    confirmation,which routing has to be used,then before this step
    you have to change the REM profile for that particular product (
    whose activities are posted  using the Preleminary cost of the
    Product Cost collector).
    Check with this,your problem will be solved.
    If still exists,revert back to forums.
    Regards
    Mangalraj.S

  • How do i set the proxy user in FF 3.6.13, this entry was existing earlier its gone now. using IE with entries in user account pwds works while FF doesn't.

    How do i set the proxy user in FF 3.6.13.
    previous versions had an entry for proxy user.
    its gone now.
    using IE with entries in user account pwds works while FF doesn't.
    too bad have to change back to IE :-(

    You can find the connection settings in Tools > Options > Advanced : Network : Connection
    See "Firefox connection settings":
    *[[Firefox cannot load websites but other programs can]]

  • Advanced printing in iPhoto for Epson R800

    Using my PC for many years I have been able to other printing options like the type of paper, gloss / no gloss and print quality for my Epson R800 - but can't find them when using my Mac. I'm not impressed with the photo printing from my Mac, so still use my PC for it.
    Surely the Mac can handle this - but how do I do it.
    Many thanks

    Which version iPhoto?
    Some used themes and some provide specific printing options
    Does your printing dialog look like the image above for Safari?
    In iPhoto, expand the pull-down menu that says 'iPhoto' (instead of Safari as an example), then select 'Print Settings'....then select 'Media Type', etc.
    If not, either the iPhoto version, or perhaps the driver you are using does not allow those options. Download the newest Epson drivers for Snow Leopard.
    The latest version of iPhoto comes with iLife '09.

  • SRM 7.0 company code selection for manual PO

    Dear All,
    We use SRM 7.0 and I have created a purchasing group under a central purchasing organization. This purchasing group is responsible from procurement of  two different Company Codes. I did all the assignments in responsibility tab and attributes tab under PPOMA_BBP.
    When i try to create a manual PO, I don't see any option to select the company code, either in "Overview" tab , nor in "Header" tab.
    Does anybody know or help me how to select/enable company code selection for manual PO creation ?
    Thanks in advance,
    Best regards,

    Dear Kumar,
    Thanks for the info. In my organization, there are two company codes and apart from them there is a Purchasing Org.
    All the attribute settings are done for these company codes. While creating a PO, as there is no field for Company code, system determines the company code automatically in background. (let's say Company code X). But I'm trying to create a PO for company code Y.  When I enter the cost center, I got the error "Cannot purchase between company codes".
    So how am i going to select company code Y ? How the system will determine company code Y ? Can you please give in details what must i do ??
    Thanks in advance,
    Best regards,

  • AP. Adjusting Selected Invoices for Manual Payments

    Hi
    We have the problem when Adjusting Selected Invoices for Manual Payments:
    The system does not prevent user from the adjusting invoices on cleared payments, though in Oracle Payables User Guid is said: "You cannot adjust
    invoices on a cleared payment".
    Of cause our users forget this when an adjusting.
    Have anybody such problem? And how she is solved?
    Navigation:
    Payments -> Entry -> Payments -> Enter/Adjust Invoices -> Reverse Payment
    Best Regards
    Anton Turovinin

    To print payment advices and payment media you can use transaction F-58. When you enter your bank details and printer details make sure you enter printer name for both the payment media and payment advices. Then it will print both.
    Hope this helps.
    Shail

  • What Print Resolution for Epson R800?

    I wonder what the value for "Print Resolution" in the Printer module should be to print with an Epson R800 on glossy or luster paper at the highest quality settings (Photo RPM).
    I would rather not have LR do any re-sampling... but given it asks for a resolution, I am unsure what is the best value to provide.

    Antonio,
    LR is limited to 480 dpi, not printer ppi:
    "This number of ink drops a printer can put on paper is called the printer resolution dpi. So if a printer has a resolution of 1200 dpi but requires 16 drops of ink to display a color, the actual resolution is much lower. Since ink drops are used in both directions (length and width: 16 drops made up of 4 rows of 4 drops), you could say that the effective resolution would be 1200 divided by 4 (or 300) dpi. Practically this isn't entirely true since modern inkjet printer can spray tiny ink drops that overlap each other. Roughly you can say that the higher the printer dpi, the higher the print quality, but it also depends on how the printer forms the dots on paper."
    quote from this article:
    http://www.wildpicture.com/pages/photography/dpi.htm

  • Tray selection for sapscript

    I am working on tray selection for an invoice sapscript. It should print in Tray 2 and so I have set Resource Name in Sapscript form to TRY02.
    It works in one client and not in another client. Does anyone have an idea why this could be?

    Please check thru transaction code SPAD
    In SPAD > select the printer>. On the output devicescreen,--> menu selection Goto --> Device Type. This will allow youenter specific PCL code for all Print Controls.
    SE71 -> on page layout, --> give a tray name (TRY01) in the resource name to all pages in the sapscript.
    But you should know the printer PCL codes (basis can help you on this)
    a®

  • Manual network selection for iPhone 5

    i need manual network selection for iPhone 5 why do not?

    You bought the wrong phone.
    Yes, it will work. Up to a point. LTE will not work as they use different LTE bands. Contact AT&T to make sure 3G data is provisioned properly on your account. And consider returning the phone and purchasing one intended for AT&T (or an unlocked phone) instead.

  • Printer Setup for automatic and manual tray

    Dear All,
        Now i have setup a printer for my cheque printing and its working perfectly.i am using SAP script for it.
        My requirement to use the same printer with some different option so that when ever i want i can take the print from manual tray and when ever i want i can take from normal tray for cheque print out.
    Please let me know how i can handle this situation. can i do any changes in my script or some where else.
    I will appreciate your help.
    Regards
    Satya

    william:
    you don't state in your original posting whether or not you've calibrated your monitors, especially to a 2.2 Gamma. in order to get the most accurate screen->print matching you have to hardware calibrate your monitors. this is by far the single most significant improvement i've made in my workflow. prior to calibration my monitors were set to a gamma of 1.8 which is much brighter than 2.2 and this causes you to NOT correct your images with the additional exposure required for proper printing. my prints were always too dark prior to calibration.
    the spyder 2 from color vision is an excellent choice.
    scott
    PowerMac G5 2.5GHz   Mac OS X (10.4.8)   MacBook Pro 2.0GHz

  • Snow Leopard Updated Epson Printer Driver for Epson R800 - poor colour !

    I just installed through software update the latest epson printer drivers and, then, deleted the Epson R800 from my printer list and added it back in (with the new printer driver). I did find a slightly different printer dialog box and found the setting of "presets" worked now (it did not previously).
    However, when I printed out of Adobe Lightroom 2.6, using a custom paper profile and no colour management, that the print was faded, the colours were washed out. The result was unacceptable. After a few attempts, I looked in the Library folder, printers, epson and found two folders labeled, "inkjet printer" and "inkjet printer2". I determined that "inkjetprinter2" was the new folder and deleted it and deleted/added in my Epson r800 (using "inkjetprinter" folder. The resulting print was perfect.
    So, my conclusion is that the new driver is not functioning as it should and I would warn users to be prepared for problems. Am I missing something here? Could I have done the updating of the printer driver and printer differently?

    You may need to recalibrate you monitor color settings.
    One of the things that changed from 10.5 to 10.6 was gamma; if you are using calibration from 10.5 or earlier, the gamma change will throw off print colors.
    Personally, on my last 2 epson printers (R300, RX685), I've configured to let the printer color manage, and used the Vivid setting.
    Have not had any off colors, etc.

  • Epson R800  and CD/DVD printing

    Using the Epson stylus photo R800 printer and its accompanying software Epson PrintCD, i started having problems printing to CDs.
    Here is the basic recovery process that worked for me.
    1) I deleted the EPSON folder in system / Library / Printers.
    2) I used Apple's Software Update...; new epson software was found and installed.
    3) I rebooted the computer.
    4) Opened Epson PrintCD software and the file I wanted to print.
    5) Inserted the printable DVD disk.
    6) Opened the File menu and selected Page Setup (following instructions on page 68 of the User's Guide for the Epson printer).
    7) There is only one selection for the [Format for:] option *EPSON Stylus Photo R800*. This is a change from the manual, at least my old manual.
    8) The text under this option now reads *EPSON SP R800 (1)*.
    9) Set the next option [ Paper Size: ] as US LETTER (manual feed). This is another change from the manual. There is a triangle to the right of US LETTER which allows the manual feed option.
    10) Select [OK]
    11) Open the menu File Print.... dialog.
    12) I left it on the [ EPSON Print CD ] and did not alter any more settings and selected [ Print ].
    If your window opens with different settings the EPSON Print CD option is the drop down after Printer: , Presets: , Copies: , Pages:. It appears in the dropdown list with layout, paper handling, cover page. etc.....
    Good Luck,
    I hope this helps.

    Reefberry, you beauty! I just installed 10.5.6 and was not able to print CDs/DVDs using Epson Print CD on my Epson Stylus Photo R800 until I read your post. I did not have to delete the Epson Folder or any of that. My problem was I didn't realize under Page Setup, Paper Size, Letter there was the option for manual feed. Before your fix I could get Print CD to recognize the printer but when I tried to print the error message was out of paper or incorrect output tray. After changing to manual feed I am back in business (literally) again. Thank you!

  • Help!  Where Did My Printing Options Go With My Epson R800?

    For some reason, I've lost the Format Settings from my Epson R800 printer (USB) when I open Page Setup. Typically you should get options for "Manual", "Roll Paper-Borderless Banner" and several others in Page Setup. This all started when I did a "Reset Printing System" in Printer Setup Utility. This deleted all the options from my Library>Printers folder. I have copied the folder contents back from a backup with no success. I've also trashed the contents of the Epson folder in the root Library>Printers>Epson folder and the EpsonPrinterDriver.pkg in the Receipts folder, and reinstalled the Epson Printer Software from my Tiger Installation Disk. Repaired permissions, ran a repair on both Disk Utility and DiskWarrior. The right contents appear to be in the appropriate folders, but when I used Printer Setup the only driver that comes up is the generic "Epson SP R800." Clicking More Printers just says that it is unable to turn Apple Talk on - I'm not using it. This has to be a software problem, because I everything works as it should when I start up using an older backup disk. This is driving me nuts! My primary use for the printer is with roll paper, and now I can't access that feature. Does anyone have a fix or suggestion for this problem? Thanks.

    Greg, I'm an idiot! Turns out the Print Browser had somehow reset itself to Apple Talk. Clicking More Printers was then giving me the can't turn on Apple Talk message. When I clicked on Print Browser popup there was the Epson USB just as you said it should be. Selecting this put me in business. So simple, and I feel so stupid. Sorry for the bother. Anyway, thanks for the help - much appreciated.

Maybe you are looking for