Equity pick up and HFM versions

Hi Gurus,
I am trying to implement the equity pick up function to calculate the investment gain / loss in our consolidation app, but it's not working properly with version 11.1.2.2.
Does anyone have any experience of this function and please let me know your HFM version?
Many thanks,
Jacky

Thanks Bryan.,
If its the case and still we want to use the "Is Calculated" on, how to recreate the EPU module funtionality in Sub Calculate as HS.entity.Owner, HS.entity.Owned and PEPU functions are restricted only to EPU modules.
Any suggestions or design consideration for writing it in SubCalculate.
thanks in advance,
Victor.
Edited by: 976062 on May 2, 2013 11:39 AM
Edited by: 976062 on May 2, 2013 11:39 AM

Similar Messages

Equity pick-up

Hi Experts,
I am confused by the function equity pick-up in BPC 10 Consolidation.
I wonder what is the difference between equity pick-up and consolidation. It seems that equity pick-up function can be done via consolidation monitor (e.g. using equity method). I am guessing if "Consolidation" is applicable only for the initial acquisition of the subsidiary, while "equity pick-up" are for capturing the on-going results from the subsidiary after initial acquisition.
Pls confirm / correct my understanding preferably with an example and really appreciate your help and guidance.
Thanks all.

Thanks for your reply Mehmet.
May I confirm that when you mention "And during consolidation process, Company A will be added to the consolidation with a "full consolidation method", as the parent company while Company B will be added to the consolidation with a "equity pick-up" method." - you refer to assigning "equity" method for Company B in Ownership Manager.
I believe everything from the above example (including equity pick-up of the 30%) can be set up in "Business Rules > Elimination and Adjustments" and consolidated via "Consolidation Monitor".
Then what does "Business Rules > Equity Pick Up" and the "Equity pick up monitor" do?
I am sorry as I am quite new to BPC Consolidation and trying to understand more. Very thankful for your guidance.

HFM Equity Pick up issue.

Hello Experts,
11.1.1.2
When we load the rule below into HFM it complains about this syntax only: Owned = Hs.Entity.Owned
If we comment it out and just use: Owner = Hs.Entity.Owner it does not fall over and even calculates numbers for me, but gets itself caught in a loop.
Sub EquityPickUp ()
'==============================================================================================================
' Equity pick up rules for Dublin
'===============================================================================================================
Owner = Hs.Entity.Owner
Owned = Hs.Entity.Owned
lPown = Hs.GetCell("E#" & Owned & ".I#" & Owner & ".V#[None].A#[Shares%Owned].C1#[None].C2#[None].C3#[None].C4#[None]")
OwnerDefCurr = HS.Entity.DefCurrency("")
Factor = lPown /100
Hs.Clear "A#IS_6112008.I#" & Owned
ProfitfortheYear = Hs.GetCell("E#" & Owned & ".A#IFRS_IS_005.I#[ICP Top].C1#AllCustom1.C2#[None].C3#C3_2.C4#[None].V#" & OwnerDefCurr)
Hs.Exp "A#IS_6112008.I#" & Owned & " = " & ProfitfortheYear * Factor
End Sub
Please advise,
Thank you,
Charles Babu J

Hey, I see you have asked lot of question on this site, one was abotu Equity pick up. I cannot get the equity pick up to work either. I have the rule and the tavle populated, but I am not gettign any results and it appears the ipown is not calculated. I have tired quite a few things, but nothing seems to work. Below is what I have done so far. Hope you have some ideas, I am stumper. Thanks! Mark
Owner} = @Entity.Member
{Owned} = @Entity.Owned
{IPown} = @GetCell(E#{Owned}.I#{Owner}.V#[None].A#[Shares%Owned].C1#[None].C2#[None].C3#[None].C4#[None])
{OwnerDefCurr} = @Entity.DefCurrency("")
{Factor} = {IPown} /100
{NIAT} = @GetCell(E#{Owned}.A#NetInc.I#[ICP Top].C1#TotalC1.C2#TotalC2.C3#TotalC3.C4#TotalC4.V#{OwnerDefCurr})
A#EPU_EqAffIncExp.C1#[None].C2#[None].C3#[None].C4#[None].I#{Owned} = ({NIAT}) *{Factor}
level owner owned %EPU
1 54 58 60
1 56 58 40
0 054Cns 58 100
0 054Cns 58 100
The table is supposed to represent 054CNS owned 100 % of 54 and 56. And 54 owns 60% of 58 and 56 the balance of 40%. in the HFM hierarchy 58, 54 and 56 all rolll up to 054Cns. 054Cns is a consolidation point(no base members). 54, 56 and 58 all have base member. When I run the EPU the balance in 058 appears in 054Cns, but I do not get the 60/40 split in 54 and 56.

HFM version 9 and version 11x difference

Hi Experts,
What is the difference between version 9 and 11x version in HFM?
regards
Dev

Workspace, other than U/I changes, looks pretty much the same to me at this point. (though I haven't used it a ton). I have a couple bugs I'm dealing with though, so it is a slight step in the wrong direction.
Workspace / Financial Reports
- 11.1.2.1, if I try to create a report book and then I add a report to it, an error pops up saying that you cannot add report books to a report book. The process completes ok, though....
- Additionally, if POV Preview is off (it is by default), you will get a very unhelpful invalid ItemID message more likely than not. This used to happen in Sys 9 as well, except that the error message was more helpful.
- In Sys 9 there is a side panel with items such as Full book in PDF, web preview, etc. This seems to be gone in 11.1.2.1
- If I run a really big report book, it takes a long time; however, the little progress bar goes away quickly into the process. If you wait, the report(s) eventually show up, but any reasonable e3nd user is going to think that the system hung up.
- Not only can you select POV items when running a report, but you can also pick the Database Connection you want to use at runtime. I've been DYING for this functionality. No more migrating a couple hundred and changing the connections when I need to test things in a Dev environment....
FDM
- Unmapped dimensions need to be mapped now. For instance, we don't use C1, C3, and ICP for most of our entities. Their import formats and mappings do not do anything with those dimensions. 9.3.1 (at least for us) automatically maps them to [None]/[ICP None]. This version doesn't do that. Fortunately, I'm good with SQL and I wrote a few queries to update all import formats and maps to add the necessary information.
Smartview
- Nothing to really say yet. Appears to work mostly the same, but we just do real basic stuff with Smartview.

Equity Pick Up Module in HFM 11.1.1

Hi All,
I am trying to use equity pick up module in Oracle Hyperion Fusion Edition but i require help in writing a rule file for the same. Can anybody give an example of the equity pick up module of rule file?
regards

Sub EquityPickup ( )
Owned = Hs.Entity.Owned
OwnerCurrencyTotl = Hs.Entity.DefCurrency & “Total”
Hs.Clear “A#Inv.C4#EPU.I#” & Owned
Hs.Exp “A#Inv.C4#EPU.I#” & Owned & “ = A#EQ.C4#C3Tot.I#[ICP Tot].E#” &
Owned & “.V#” & OwnerCurrencyTotl & “*” & Hs.PEPU(,,,,)
•     Hs.Entity.Owned - Gets the owned entity of the entity pair being processed.
•     Hs.Entity.Owner - Gets the owner of the entity pair being processed.
•     Hs.PEPU (“S#.Y#.P#”, Owner, Owned)- Gets the percentage of ownership from the EPU table. If the values are left blank, the function returns the percentage of ownership for the current entity pair in the current scenario, year, and period.

Equity Pick-Up Sample Routine

Hi there,
we are analyzing efforts and constraints related to a list of new requirements from the client.
Among these requirements, there is also the implementation of the equity pick-up feature.
In order to assess properly the customization I would need a sample of a very basic sub routine used to manage the equity pick-up.
Many many thanks to whomever can help me.

Did you ever get the EPU to work? Has anyone had issues with version 11.1.2 EPU table appearing and disappearing? We are experiencing this. Any ideas would be greatly appreciated!
Edited by: 931346 on Sep 13, 2012 5:09 PM

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display/

How can I create a slideshow that depicts only a version of a photo rather than the original? Since the original and new versions are saved together, the aperture slideshow often choices the original rather than the desired version to display.

There are two things we use the name "Slideshow" for in Aperture: a Slideshow Album, used for making Slideshows, and the Slideshow that is made. (Imho, it is a design mistake to not call the containers used to create Slideshows, Books, etc., "Albums".)
The Slideshow will use the Album Pick from any Stack. A good way to use Aperture is to promote the Image you want to regularly use (such as, for example, a Version with adjustments) to the top of the Stack. This makes it the Stack Pick, and will be the default Album Pick. If you haven't done that, you can still change the Album Pick for any Stack in a Slideshow Album. Expand your Stack(s), select the Image in each Stack that you want to be the Album Pick (and thus shown in the Slideshow), and "Stacks➞Set Album Pick". (Note the keyboard shortcut; there is also a Toolbar icon for this.) The change is immediate. The Slideshow will always show the Album Pick (or, if there is not one, the Stack Pick) for every Stack in your Slideshow Album.

Planned order to prod order----order type and prod version/ routing

Hi,
My client produces a material in three different locations. The process at all the locations is same. Each location has the set of same work centers. We have differentiated the workcenters at the three different locations by naming conventions. I am mainting three counters in the routing with different set of work centers.
We want different order types for the production orders processed at these three locations. Also I should be in a position to select the routing/ production version manually for the production orders processed at the three different locations. When I am creating a production order manually, I can select the order type and even the routing or production version.
But here I am converting the planned order to production order. The system is picking the order type as maintained in OPPE. In OPL8 I maintained manual selection of prod version. But version 1 is selected default by the system. Can I have any control over the selection of order type and prod version/ routing?
Thanks and Regards,
Raghu

Dear,
Selection of production version is only possible at manual creation of production order, but not when converting planned order to production order. you can manually change the production version if u want to in the planned order.When you have a planned order it would default contain a valid production version. So system would just take the Production version in the planned order to use the same in Production order. If you want to change the production version in production order then go to CO02-FunctionRead PP Master data and change it.
(Goto OPL8 and select Manual Selection of Production Order in Production Version field
And in MRP4 view of material master select - Selection only by production version as the option for the Selection method field )
Hope clear to you.
Regards,
R.Brahmankar

Mismatch of JDK and JRE versions cause screen freeze for applications ?

Hi,
My Java swing application is built on jdk1.3.1_17 in server. It was working fine without any issue when I use Java webstart 1.0.1 to download the client part of the application and JRE 1.3.1_10 to run the application from my local desktop.
For better performance, I upgraded my local desktop to 1.4.2_07 version of JRE and same version of java Web start 2 months before. From that day, I am facing a "Screen freeze" issue in my application. It means, while working on the application, the application screen goes blank or White screen. This issue may come while doing any activity all of a sudden , there is no pattern found.
Is there any reason like incompatibility of lower JDK version and higher JRE/JWS versions could have caused this issue ? Any Idea plz
Thanks in advance
David

I'm using a 15" Macbook Pro with Retina Display. The applications I have are Indesign, Illustrator, and Photoshop. Over a period of time, using these programs will make the screen turn blank. Sometimes, the screen turns a solid color and it just happens to be what ever color I've been using with the Color picker tool.
I don't know for sure what it could be. I tried checking Disk Utility (one problem was solve, but blank screen wasn't fixed).
I have to force reboot only to be faced with another blank screen. I either keep trying or keep cmd+opt+p+r until the screen boots back to normal. (This is probably due to the programs not shutting down properly when the laptop blank screens)

Subcontracting (Multiple Vendors Involved) and Production Version's

Hello all,
I would like to know more about this stuff. So do share your valuable thoughts.
I was trying out a sub contracting scenario with multiple Vendors and Production Versions involved. The production version is designated in such a way that lot size/quantity of the requirement determines which of the available version's to be taken into consideration whilst generating procurement proposal via MRP.
#1. Production Version:
5 Version's of the BOM are assigned to various lot sizes.
#2. I had 5 different info records created for the material-Vendor combination. Each one of them were assigned with a Prod version to it.
Sample:
#3. Post these settings i had a MRP run executed. Well !!! the results were different off-course. I neither did see the procurement proposals classified based on the prod version nor the first prod version assigned to the procurement proposals ( i meant i had a different prod version(version 4) assigned to the procurement proposals generated).
Questions:
#1. Well the first thing that did strike my mind was how could i get the source list work for such scenario's ? I guess i can't go with quota arrangement coz which would split the procurement proposals into many halves and assign's it accordingly to the vendor.
#2. How come production version 4 given the top priority here ?
Source List state:
                         a. I had an item (tried the others as well) checked with fixed vendor indicator but the info record of the material-vendor combination had a different Prod. Version in it (well not PR4, i can guarantee you on that)
                         b. I had nothing marked with fixed vendor indicator. Results post MRP still did pick the same prod version (Version 4).
#3. Last but not the least how can i get this thing to work ?
Please do help out.
PS: MRP 4 selection Method: 2 - Selection by Prod.Version
Regards,
Rahul

Hello Rajen,
Well as per your comment "
Regarding the splitting, Not Always.
There are two types of quota arrangement - Allocation quota and splitting quota."
so meaning that allocation quota doesn't split the procurement proposal is it ? If so how are they assigned to vendors ? any other criteria being used up here
Anyhow i had a new lot size method created with the splitting quota field unchecked. So how do i proceed from here ? meaning that how should i manage my quota file to not have my procurement proposals split ?
Please do help out.
Regards,
Rahul

So I updated the itunes and now it won't open it, it states a message "the itunes library.itl" cannot be open because it was created by a newer version of itunes, I have unistalled and re-installed newer and older version and still i get this message.

I updated and now i can't use the itunes. I have unistalled several times, installing newer and older versions but still i get this message. Is there anything i can do to fix this problem??

Try the following user tip with that one:
Empty/corrupt iTunes library after upgrade/crash

After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly, neither in preview nor in Camera Raw dialog.

After installation of latest Bridge and Photoshop version (2014.2.2) *.CR2 files will not be displayed correctly anymore, neither in preview nor in Camera Raw dialogue.
Some pictures have white squares with blue and red diagonal stripes that cover almost the complete picture.
When opening those files I have the same problem in Camera Raw dailogue and even in Photoshop eventually.
I tried to open the same same pictures on another computer with the same version of Bridge and Photoshop but the problem remains the same.
It seems like the files itselves are still ok, because if you open an explorer window the previews of the pictures are all ok. And the pictures' sizes remain the same.
I tried to clear the cache in both programs but it didn't help.
Has anyone an idea????

First see if a reboot of your PC helps. If not,
Resets may be in order:
Photoshop: Press and hold Control - Shift - Alt immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be VERY quick - it will prompt you to confirm deletion of your established preferences, which will lead to them all being set to defaults.
Bridge: Start Adobe Bridge and immediately press Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS) until the Reset Settings dialog box appears. Select all three options--Reset Preferences, Reset Standard Workspaces, and Purge Entire Thumbnail Cache--and then click OK.
Outdated graphics drivers can also cause display problems. Go to your GPU maker's website and be sure you have the latest drivers for your card model.

When I try to load a pdf in iframe and I disable PDF toolbar, Its working fine in Internet Explorer and lower versions of Firefox, but in Firefox 19 its not

When I try to load a PDF inside Iframe and I disable toolar=0 (as guided by adobe). I am able to see the iframe with PDF with no toolbar in IE and lower versions of Firefox (till version 14).
But in my current version 29, The PDF is visible with toolbar on top.
Can you please let me know the way to display pdf with no toolbar in Firefox 29?

I replied on your similar question here: https://support.mozilla.org/questions/1005225

Active and delivery version of ODS

hi
can we check or compare ther delivery version and active version of the infosource.
is there any transaction or table other than RSA1-business content where we can compare objects in infosource.

Hi,
RSIS info source for transaction data
RSOS info source for master data, texts, hierarchies
Regards
Siddhu

How to prevent iTunes for Windows from "Updating iTunes Library"? (Library is on a NAS and managed by iTunes for Mac. Now getting update wars between Mac and Windows versions of the player.

How to prevent iTunes for Windows from "Updating iTunes Library"?
My library is on a NAS and managed by iTunes on a Mac. I can connect from wife's Windows laptop using iTunes for Windows but every time I do, it Updates iTunes Library. Next time I log in from my Mac it Updates iTunes Library in return. It appears I'm experiencing "Update Wars" between the Mac and Windows versions of iTunes. I would like to allow my wife to stream iTunes songs to her new laptop but I don't want any updates from this source... prefer to manage the library from my Mac and not allow Windows to do any thing other than listen to existing playlists.
Thanks for any help/suggestions.

Connect the PC to the library on the NAS. Wait while "updated".
Under Edit > Preferences > Advanced make sure the media folder is correctly pointed at the media folder on the NAS. If not correct, close iTunes, wait a few moments, then open iTunes again.
Close iTunes on the PC. Do not open iTunes on the Mac.
Copy the library files, iTunes Library.itl, iTunes Library Extras.itdb, iTunes Library Genius.itdb, sentinel and the folder Album Artwork into an empty iTunes folder on the PC, for example C:\iTunes.
Click the icon to start iTunes and immediately press and hold down SHIFT. Keep holding until prompted to choose or create a library. Click choose and browse to the copied .itl file, e.g. C:\iTunes\iTunes Library.itl
The library should now work properly on the PC, however check the setting for the media folder. If needs be correct, close iTunes and reopen.
Open iTunes on the Mac. It will update again, but that should be last time.
tt2

Equity pick up and HFM versions

Similar Messages

Maybe you are looking for