Equium A300D - microphone and speakers don't work properly

I have an annoying problem.
With my sound card on its default driver, I cannot get the microphone (front jack) to pick up anything.
Yet when I upgrade with the latest drivers I then lose the onboard speakers and can only get sound by plugging in external speakers.
Can anyone help?

Hi!
I dont understand why the onboard speakers not work with the latest drives.
Did you download the driver from Toshiba?
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Furthermore you should check if you have the newest BIOS version. There are two BIOS versions available: One for Vista 64bit and one for Vista 32bit. So choose the right one make the update.
Bye

Similar Messages

Audio output changed to 'Digital Out' and speakers don't work! Please help!

I'm not exactly sure what's happened, but after starting up my macbook pro, my speakers/audio haven't worked.
The volume control in the menu bar is inactive (looks light grey) and in the Sound menu, I have no option for output devices except for 'Digital Out' - there is no other option for 'external speakers' (as per usual) or anything!
I can plug earphones in, and sound comes out fine... I don't know what may have happened, but I'm really worried - I use my MBP for home & work; I need my speakers to work!!
If anyone can offer any advice, I'd be really grateful. Thank you in advance.

Talked to Tech Support about this when my machine locked up in this same fashion. There's a little "door" inside the headphone jack that can get stuck in the open position and keep the audio from switching back to the internal speakers / stuck in the digital (optical) output position...
The solution: the iPick... It's a toothpick, but if you use it to poke around inside the headphone jack until the little door gets unstuck, it becomes an iPick, and a box of them are very expensive, but they come in lovely colors and are very intuitive to use...
I'm not kidding... Stick a toothpick (or other non-conductive small stick) in the headphone jack and joog it around until it releases the little door...

Core Audio: Selected Driver not found. (-10202) error message and speakers don't work

Apple just replaced my hard drive and now I'm noticing that I have no sound coming out of my internal speakers or earphone jack. When I try to use garage band I get the following error message:
Core Audio:
Selected Driver not found (-10202)
I read their article on the subject; I go to system preferences, sound then output devices where I'm supposed to select my device except there are none listed. I tried to fix the problem by reinstalling the operating system using the CD's that came with the MacBook Air but that didn't work either.
Here's the other problem, when I download the software update the update never loads. The status bar just sits there even when I let my pc alone over night.
Any suggestions??
FYI, i can't easily walk into a mac store for assistance.. gotta catch a plane to a different island.

Update your Apogee and Symphony drivers to Mountain Lion versions...
But the bigger question is.. How did you install Mountain Lion on a G5?

Toshiba Satelite L505D-GS6000 usb ports, sd card reader and speakers don't work

OK..
I do not know much about computers and hope that I can find help here.. I had problems with my laptop yesterday to the point where it wouldn't let me do anything. I took it to Bestbuy and the told me that parts of teh computer was disabled. At the time all I realized that all I realized that was disabled was the ability to connect to the internet. I have since found that the touch portion of the mouse does not work. The laptop says that it does not have speakers. I am not able to use the sd card reader or the usb inputs either. I am guessing that somewhere on the computer there is somewhere that I can change the settings and set it up so that these functions are not disabled... Any input that can be offered would be appreciated.. Please keep in mind that I do not know a whole heck of a lot about computers..
-Dan

Satellite L505D-GS6000
Best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. If it doesn't work right then, you probably have a hardware failure.
See the section Recovering the Internal Storage Drive, which begins on p. 61 of the User's Guide.
Satellite L500 Series User’s Guide
-Jerry

Ebay, trip advisor don't load, safari, firefox and chrome don't work properly

Hello, I have this strange problem. I go to ebay web site, and is all ok, but when I click on my ebay, then the page doesn't load. Other casa is when I open trip advisor. It doesn't load. I can't travel, or buy anything.
I have lion updated, firefox 8.0.1 updated, and don't know what to do to fix the problem.
May you please help ?
Thanks.
pilotino777

How much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you have a minimum of 15% free disk space.
Freeing Up Hard Disk Space - Mac Guides
If it's not a space issue Jason, use Lion Recovery

Updated to IOS7 and now camera and FaceTime don't work properly

I updated to IOS7 and now my camera only takes still shots, and no video. it also won't reverse shots. My FaceTime allows us to see the people we're calling, but they can't see us. any suggestions?

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Notifications for Mail and Calendar don't work properly

I only receive the Notifications from Mail and Calendar,
when those applications are open and running.
(yes, I have Preferences set to Alerts (not banners),
all the following boxes are all checkmarked:
Show in Notification 5 Recent Items
Badge app icon
Play sound when receiving notifications).
I receive Notifications regarding other apps,
such as Reminders, just fine, even when Reminders is closed.
I usually have Mail and Calendar closed (not running)
therefore I miss virtually all Notifications from those programs.
If I have to have the programs (Mail and Calendar) open all the time,
what's the point of Notifications?
When Mail and Calendar are open and running,
they alert the user with their own alerts
(without need for Notifications).

appleuser8000 wrote:
I only receive the Notifications from Mail and Calendar,
when those applications are open and running.
Mail
That is the expected behavior.
Best.

Upgraded to yosemite now my speakers don't work and i can't play videos on Facebook.

When i play a video on face book I'm told i need to upgrade flashplayer, i wasn't even aware i had it downloaded! I have got rid of flash player (i think ) and now I'm told i need to download FP before i can watch videos. I can't play games on FB either and my speakers don't work.
I wish i hadn't upgraded to Yosemite to be honest as i prefer the old layout and it seems to have caused me problems. Everything was working fine before the Upgrade to Yosemite.
Im not good with computer terminology so please reply as simply as possible :-)
Thank you

Try un-installing and then re-installing.
Adobe Flash Uninstaller
Adobe Flash Player
Adobe Flash Player updates available for OS X on October 24, 2014
Sound.
Sound – can’t hear sound from speaker - Yosemite
Sound – No Sound After Upgrade (2)
Sound Levels - Troubleshoot
Sound – Troubleshooting Internal Speakers

My iPhone 4 speakers don't work with music it only works when I get calls

When I try to play music or videos my iPhone speakers don't work but when I get a phone call it works and I've tried everything to get them to work but no result yet. The first time it happened it was because there was lint in my speakers but I cleaned them out and now that its happened again I can't figure out what's wrong.

OK, let's try a reset.
A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 10-15 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

EXTERNAL SPEAKERS DON'T WORK

External speakers don't work. They are LABTEC LCS 2420 speakers. The internal speakers with RealTek driver works fine. I have an HP Pavilion 23 touchsmart All-In-One PC with windows 8. I plugged the speakers in the headphone port then tried the audio jack in the back with the same resullt. When I right click on the sound icon and click on playback devices and riight click in the open area i checked show disabled and disconnected devices only the speakers realtek icon appears. Do I need to download other drivers and how should I do this?

Try the following: Control Panel > Hardware and Sound > Manage Audio Devices > in the 'Playback' tab you should see the ports (rear and headphone) > R-Click the one that you are using for your external speakers and make it the default device.
Trust this helps.
regards davida
"Although I am an HP employee, I am speaking for myself and not for HP"

Built-In Audio Output Speakers Don't Work

My Built-In speakers don't work on my Macbook Pro anymore.
I plugged headphones into the headphone jack last night when watching a film, now all of a sudden when I remove the headphones my built in speakers dont work.
When I try to turn up the volume I get the circle with a line through it telling me it can't be changed.
I went to system preferences and it says my speakers can't be configured and my Master volume track is un-highlighted so It can't be changed.
Whats going on?
Macbook Pro 15.4" 2ghz Mac OS X (10.4.8) 1GB, 100GB HD, 256MB Video, Final Cut Studio 5.1, Panasonic DVX100, 1TB EXT HD

Is there a red light glowing inside the jack? It sounds like a faulty jack. Read this:
http://forums.macrumors.com/archive/index.php/t-232084.html
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
iTunes: MacOSG Podcast
 An Apple User Group 

My iPhone's speakers don't work

My iPhone's speakers don't work when I play music or the sounds of apps, but if I get a call they work. What can I do?
Some people told me they can change my phone because it's a hardware problem, but I bought at USA, I live Peru. thanks

The iPhone includes a single speaker.
If no change after restoring the iPhone with iTunes - especially after restoring as a new iPhone or not from the backup, the iPhone has a hardware problem.
The iPhone includes a one year warranty and for an iPhone purchased in the U.S., the warranty will be honored in the U.S. only.

External speakers don't work with Yosemite

I have just upgraded my iMac to Yosemite and now my external speakers don't work.
They are there to be used under System Preferences -> Sound as "Bose USB Audio"
But when I select them I get no sound and "The selected device has no output controls"
I do get sound if I select the Built-in Internal Speakers
The Bose speakers worked fine under Mavericks.
Can anyone help me get them working again ?

Had similar issues with Bose Companion 5 after Yosemite installation. Tried most suggestions posted here without success.
But Birkers' post about plugging in/out analog headphones from Bose puck gave me an idea.
1. Removed Bose USB cable from iMac (Late 2014 Retina 5K / Yosemite 10.10)
- confirm that Bose disappears from Sound panel in System Preferences
2. Played music through internal speakers - OK
3. Played music through 2nd Display speaker - OK
4. Re-connected Bose USB cable to a different USB port
- confirm that Bose appears in Sound panel in System Preferences
5. - Bingo! Sound now playing trough Bose system

When my Mac goes to sleep, the speakers don't work

When my Mac goes to sleep, and i wake it up later, the speakers don't work AFTER it is woken up. You can't hear anything at all.
btw.... my serial number is [ Edited by Host ] .....if it helps.

I don't think the post can be edited after 10 or 15 minutes, what madking can do is ask host to remove it from this forum.
In addition to my own post, here are the correct link.
try to reset PRAM and SMC to refresh your macbook hardware behaviour:
http://docs.info.apple.com/article.html?artnum=2238\
http://docs.info.apple.com/article.html?artnum=303319
Good Luck

External UCube speakers don't work after awakening from sleep mode since 10.7.5 upgrade

Ever since I upgraded to 10.7.5 when I wake my computer from sleep mode...my external UCube speakers don't work unless I unplug them and plug them back in. I've already tried resetting the SMC. It recognizes and shows the speakers in the sound preferences...but no sound unless I reconnect the usb cable. Worked fine in 10.7.4
Any ideas? Its ridiculous all the audio problems being reported.

I have a mac mini (A1283) with OS 10.7.4. Upon upgrading to 10.7.5 it did not start up again. Instead, the light was on and the hard drive did not start up. The light on the connected USB mouse was not lit.
My solution:
Cold start with Command-v pressed.
This should start Verbose mode (see http://support.apple.com/kb/HT1492 ).
What happened on my mac mini was that the grey startup screen with the Apple logo appeared for a long while before the login screen came.
Maybe Cmd-v set open firmware params and fixed some corruption.
Anyway: my mac mini works again.

Equium A300D - microphone and speakers don't work properly

Similar Messages

Maybe you are looking for