ERecruiting - Internal error in Recruiter-- Approve Pending Requisitions

Hi All,
We are facing an internal error message in the following path:
Recruiter start page-->Approve Pending Requisitions
Whenever Recruiter selects an entry from the list and clicks on the "Process Request" button, it will ask for Production logon and when we enter the values we are getting the message "An internal error occurred. Please try again later".
Thanks,
Pooja

Hi Pooja,
We are also working in EHP4.
Can you please tell where did you get
Recruiter start page-->Approve Pending Requisitions?
We are not able to see pending requisition for approval under recruiter? Are you seeing under recruiter UWL?
Regards,
Purnima

Similar Messages

  • MSS Recruitment Requisition 'Internal error: null" message

    We are setting up the recruitment requisition functionality of MSS.  When the form loads (via the Form Tree) we just get the message "Internal error: null". 
    I have checked the back-end config and iView properties.  All of the required PAR files are loaded.  We have MSS 50.2 on EP5-SP6.
    I think the same message might come up with the PCR forms too.  I would really appreciate any tips as I'm pretty stuck here.  I couldn't find any relevant SAP notes. Thanks.
    Log:
    com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
    at com.sapportals.portal.prt.core.PortalRequestManager.handleRequestException(PortalRequestManager.java:688)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:289)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:231)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:475)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:285)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:524)
    at com.sapportals.portal.prt.portalconnection.sapnative.DelegatedPlugIn.handleRequest(DelegatedPlugIn.java:715)
    at com.sapportals.portal.prt.portalconnection.sapnative.PortalPlugIn.handleRequest(PortalPlugIn.java:138)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:648)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:147)
    at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:789)
    at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:644)
    at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:305)
    at com.inqmy.services.httpserver.server.Response.handle(Response.java:166)
    at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1152)
    at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
    at com.inqmy.core.cluster.impl3.ParserRunner.run(ParserRunner.java:30)
    at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:132)
    Caused by: java.lang.NullPointerException
    at com.sapportals.portal.pcdeditor.message.PCDEditorMessageHTML.isValidUrlParamString(PCDEditorMessageHTML.java:97)
    at com.sapportals.portal.pcdeditor.message.PCDEditorMessageHTML.createOnLoadJs(PCDEditorMessageHTML.java:54)
    at com.sapportals.portal.pcdeditor.message.PCDEditorMessageHTML.createEmptyMessage(PCDEditorMessageHTML.java:31)
    at com.sapportals.portal.pcdeditor.message.PCDEditorMessageMain.doContent(PCDEditorMessageMain.java:39)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:127)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:285)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:231)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:475)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:285)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:524)
    at com.sapportals.portal.prt.portalconnection.sapnative.DelegatedPlugIn.handleRequest(DelegatedPlugIn.java:715)
    at com.sapportals.portal.prt.portalconnection.sapnative.PortalPlugIn.handleRequest(PortalPlugIn.java:138)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:648)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.inqmy.services.servlets_jsp.server.InvokerServlet.service(InvokerServlet.java:126)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.inqmy.services.servlets_jsp.server.RunServlet.runSerlvet(RunServlet.java:147)
    at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.startServlet(ServletsAndJspImpl.java:789)
    at com.inqmy.services.httpserver.server.RequestAnalizer.checkFilename(RequestAnalizer.java:644)
    at com.inqmy.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:305)
    at com.inqmy.services.httpserver.server.Response.handle(Response.java:166)
    at com.inqmy.services.httpserver.server.HttpServerFrame.request(HttpServerFrame.java:1152)
    at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
    at com.inqmy.core.cluster.impl3.ParserRunner.run(ParserRunner.java:30)
    at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:132)com.sapportals.portal.prt.core.PortalRequestManager@7a687b #

    Hello Mike,
    We already had this kind of situation.
    On the transaction QISRSCENARIO you need to select your scenario and generate the .PAR file again (they will be on C:     emp). Then unzip those files and search for the "default.properties" and there you will find a parameter "SystemIdentifier.value=" that need to be your System Álias on Portal. I don't know why, but when you generate the file this parameter it is filled with SAP_R3_Financials. After the change you need to upload the .par file.
    Good luck!
    Daniel Kiel

  • Internal error while posting job in erecruitment

    Hi all,
    I am facing a internal error occured problem in erecruitment.
    I went to erercruitment>employee>recruiter>maintenance>create requistion-->posting
    under that after giving datas i am trying to save the file.
    then its showing these error.
    Please help me to resolve this issue.
    Thanks and Regards
    Vijay

    Hi,
    I think you are following the below path:
    Personal Pages > Requisition Maintenance > Requisition > Job Posting .
    under job postings we have 1.Basic data
    2.Basic data
    3.status
    4.Data overview.
    5.Publications.
    under the Requisition---->Status(one of the tab, before to Job postings)
    Check with the status should be in 'relased' state.
    If it is Relesed it wont give you an error.
    I faced this problem in the earlier while developing my object.
    Let me know if you are facing any problem.
    Thanks,
    Anil.G

  • Error while approving time sheet "Internal Error Occurred"

    1) Time Sheet entry done for an employee b/w 3rd-5th Oct 2011, while approving it through T code - CATS_APPR_LITE, its giving the error " INTERNAL ERROR OCCURRED" !!!
    When the error is expanded, the below details have come up.
    Internal error occurred
    Message no. LR030
    Diagnosis
    The system has detected an internal program error which should not have occurred in a normal program run.
    Procedure
    To safeguard your data, notify the SAP hotline.
    2) Please let us know, is there any other procedure or way to approve the time sheets ???
    Reg,
    Hrishi - 9945607822

    Note 1315885 - CATS: Internal Error(LR030), in transaction CATS_APPR_LITE
    Refer and apply the mentioned note if applicable.
    Regards
    Sreenivas

  • E recruitment Internal error( Rabax_state) in webdynpro abap services

    Hi all,
    We are facing an error as shown below in our webdynpro services for E recruitment release 604 level 0006 and Ecc 6.0 , all customizations has been done , trex already installed and running properly but many of services throwing this error as below . I have searched extensively on sdn but not found the solution , tried debugg dump in st22, pls guide me , i am stuck up in between due to this error.
    Error when processing your request
    What has happened?
    The URL http://kbldev.kbl.co.in:8000/sap/bc/webdynpro/sap/hrrcf_a_candidate_profile_int was not called due to an error.
    Note
    The following error text was processed in the system DEV : Internal Error
    The error occurred on the application server kbldev_DEV_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: REPORT_MESSAGE of program CL_WDR_MESSAGE_MANAGER========CP
    Method: IF_WD_MESSAGE_MANAGER~REPORT_T100_MESSAGE of program CL_WDR_MESSAGE_MANAGER========CP
    Method: INITIALIZE of program /1BCWDY/6N9NUEU3ADS9XG9U4DTI==CP
    Method: WDDOINIT of program /1BCWDY/6N9NUEU3ADS9XG9U4DTI==CP
    Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/6N9NUEU3ADS9XG9U4DTI==CP
    Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
    Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
    Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
    Method: INIT of program CL_WDR_CONTROLLER=============CP
    Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
    Regards,
    Shwetang

    Hi,
    such errors can have quite a number of reasons. As a first step I'd head for the sap-load-generator (T-Code SGEN) and run it over the complete system and after it over all web dynpro applications. When everything is finished invalidated the http server caches e.g. by usung T-Code smicm.
    If this is not successful please give us a nother post.
    Kind regards
    Roman

  • E recruitment -career and job Error u201CAn internal error occurred. Please try

    Hi All
    The issue is E recruitment regarding career and job (internal candidate) in this page select candidate profile I am getting Error u201CAn internal error occurred. Please try again lateru201D  (my client using BSP and Portal)
    I was checked T- code  SLG1 but it show Errors 1) Periodic service was not executed due to concurrent service2) The error occurred in program RCF_PERIODICAL_SERVICES line 41
    And also I checked T u2013 code SICF for services hrrcf_start_int tested but here also getting error u201CAn internal error occurred. Please try again lateru201D
    Please any one guide me for how to resolve the issue
    Regards
    Eshwar

    Hello Eshwraj,
    Please check out the following :
    Please check transaction SM37 and check have you create a periodical job for program COM_SE_DISPATCHER. If this is the case this is not correct - only RCF_PERIODICAL_SERVICES has to run as periodical job which indexes the objects then.
    Please delete your COM_SE_DISPATCHER job and activate the RCF_PERIODICAL_SERVICES job again and test the service run afterwards.
    The services DISPATCH_CPOINTER_FOR_PUB_INT and DISPATCH_CPOINTER_FOR_PU_EXT of program RCF_PERIODICAL_SERVICES do the pre-work which means that they create the change pointers for the
    postings which are then processed by program COM_SE_DISPATCHER. These services are only called by program RCF_PERIODICAL_SERVICES. COM_SE_DISPATCHER can't do that alone. Report COM_SE_DISPATCHER is
    called automatically.
    Best Regards,
    Deepak..

  • E-recruitment Internal error

    Hello,
    I have configurated all the functional requirement, then i generated the URL for Employee, Ext cand recruiter, Administrator. but when i pasted the URL in IE and executed, it give me error
    " An internal error occurred. Please try again later." for Recruiter's Page after login with user id
    "Blank page for  internal employee page"
    first time i am able to see ext cand page for registration but next time the page is blank.
    any opinion on this errors. Is thing i missed out in configuration or missed any activations.

    Hello Tendai,
    beside my recommendation not to run sap e-recruiting in an integrated scenario - yeah, won't stop telling that to people till perhaps anywhen someone changes it that integrated installation is an option in an serious HR environment :o(.
    Ok back to the question. SAP help as only half right at this topic. In general for the production environment the candidates are created by the hr / bp / e-recruting integration documented in note 997181.
    As usually there are exceptions. Of course you can, as very first project step, set up the whole integration and create your candidate to work with by running HRALXSYNC on an existing employee id in your development system or run a new hire action to get an employee which triggers the integration and creates a candidate. But in standalone you won't start your project by setting up the ALE to get your candidate either. So the standard approach when starting a project is to run RCF_CREATE_USER for the first core project team members which want to have a look on the installation to check if everything was installed fine. You can use a free employee Id and perhaps a fake email address if you want to use your existing PA record (if available on DEV) for testing the integration later, but just if you want. With these candidates you can begin your project having system access supporting the design / customizing process without waiting till the integration is running properly which proved to be very helpful.
    In addition to that even on production RCF_CREATE_USER is used for creating candidates for non employees. Most common case here is creating the candidate for WF-BATCH who needs one e.g. for sending correspondences. Other such situation is having candiates for support / consultancy users which have to do some tests / checks on the e-recruiting frontend. 
    Hope that answers your question.
    Kind Regards
    Roman

  • E-Recruiting: internal error occurs

    Hi guys,
    I'm trying to test the E-Recruiting-Application, but when I try to save some information in the cadidate's profile over the webapplication an internal error occurs.
    When I access over the start page of the recruiter I can make changes to the corporate structure. So all connection settings should be okay. Do anybody know what I can do next?
    (We are running E-Recruiting 600 and ERP HCM on the same machine.)
    Edited by: MHP OSS User on Jun 12, 2008 5:15 PM

    Hi Jacqueline,
    it seems that the standard netweaver virus scan profile for /PAOC_RCF_BL/ is active.
    Since 6.40 the virus scan can be activated in netweaver instead of the e-recruiting BADI.
    So this might be the second option to look at.
    Therefore check unter System administration/VirusScanInterface in SPRO if any profile was marked as active.
    Regards
    Sebastian

  • Internal Error in Search for Candidate in Talent Pool in E-Recruitment

    Hi All,
    I've problem in Search in Candidates in Talent Pool in E-Recruitment in SAP E-Recruitment. When I search with text, it just gives internal error. I digged into the BSP Application as well. In the funtion call "SDOK_INDEX_COMBINED_SEARCH_XML" returns error "document area not specified" and raises an internal error. Anyone faced similar issue??? Please Help!!!
    Thx,
    Anand

    Well, obviously you never used any component of KPRO yet.
    Just upload an attachment onto the candidate's profile.
    An index category should automatically be created.
    Also generate search profiles and plan the periodical service RCF_PERIODICAL_SERVICES. You can find the documentation about this report and search profile via IMG.
    Also look if HR_KW is checked within transaction SKPR06.
    Message was edited by: Sebastian Menger

  • When logging as recruiter getting "Internal error occurred"

    Hello,
    We are running Erec & ECC on different systems.
    When logging as recruiter in Erec prd system getting "Internal error occurred" -
    I checked the SGL1 -
    1.) The error occurred in program CL_HRRCF_ABSTRACT_CONTROLLER==CM001 line 56
    2. ) The error occurred in program CL_HRRCF_START_A==============CM007 line 19
    Please help me how to go with this...
    Regards,
    Poornima

    Hello,
    No the note doesnt help.
    Any other clue what could cause the error?
    Regards,
    Poornima

  • Internal error after editing a correspondent letter in E-Recruiting

    Hello,
    Running E-Recruiting 6.0 SP10
    As a recruiter whenever I try to prievew a correspondent letter I modified (note, I have no problems editing the letter) using the correspondent letter editor, I recieve an "Internal Error".  Additionally, the following SLG1 error is created:
    Form or text 472FCB84F86804EDE10000000A321A does not exist
    Prior to editing the letter I am able to preview it using the display link just fine.  E-Recruiting should allow me to edit a letter and preview it prior to sending it to a candidate, yet at present it does not.
    Any idea what this could be?
    Thanks, Ryan
    Edited by: Ryan Hubbell on Mar 17, 2008 11:04 PM
    Edited by: Ryan Hubbell on Mar 17, 2008 11:08 PM

    Hello Ryan,
    with release 600 SAP e-recruiting offers 2 different implementations for changing correspondences / invitations. The classical solution uses a web editor. Therefore the complete smartform is rendered and then put in a web editor. As this solution lead to some problems in the printing channel, sap developed another concept of changing. The new solution uses a text edit to change a text block you can assign to the smartform as changable area and only this can be changed ensuring the formating of the smartform is still fine.
    You have to decide which of these 2 options you want to use. You either use the old or the new solution for all correspondences and invitations.
    The solutions differ in the following configuration points:
    - old: T77S0 RECFA INDCO is blank
    - new: T77S0 RECFA INDCO is X
    - old: document category for simple correspondence 1, for invitation 2
    - new: document category for simple correspondence 3, for invitation 4
    (category for confirmation is always 5, there is no other option no matter which concept you use)
    - old: Assign changable letter sections to forms not available
    - new: Assign changable letter sections to forms not available
    - old: reference for SF interface simpl. corr. HRRCF_CS_APPLICANT, invitation HRRCF_CS_APPL_INVITATION
    - new: reference for SF interface simpl. corr. HRRCF_CS_IT_APPLICANT, invitation HRRCF_CS_IT_APPL_INVITATION
    (basically the smartform interfaces differ in the parameter THEAD which is needed for the new but not for the old correspondence change concept)
    Please check if your configuration is consistend for the concept you chose for your project. If not try adjust configuration and check if the error disappears.
    If the error is still existing please give another reply.
    Best Regards
    Roman Weise

  • E-Recruiting u2013 Internal Error when registered as external candidate

    When try to register as external candidate got an internal error page. In SLG1 showed error as u2018Could not determine recipients for message type HRMD_Bu2019
    u2018The error occurred in program CL_HRRCF_CANDIDATE_ADMIN_BL===CM005u2019.
    Any suggestion on this will be great help. Thanks.

    Dear Morin,
    We have got the same message while running program for creating candidate for Erecruitment.
    I::000
    I::000
    Candidate 50570305 does not exist
    Could not determine recipients for message type HRMD_B
    This is the error message when i execute the program  "RCF_CREATE_USER".
    we were using this program,to create the CP,NA,BP objects for the employee.
    Can i have ur inputs for the same.
    Regards,
    Pullela.
    Edited by: UV SAP on Jun 13, 2011 8:46 PM

  • E-Recruitment - Error "An Internal Error Occured Please try again Later"

    Hi Experts,
    When I try generating the url, It popups for User Name and Password, then it gives the Message like this..
    "An Intenal error occured, Please try again later"
    Kindly help, Is that any Techinical Settings I have missed to get this error...?
    Thanks
    Nirmal Kumar

    Hi everybody,
    I'm getting the same error in erec BSP pages.
    "An internal error occurred. Please try again later."
    i Checked the detailed about the error in SLG1 transaction.
    The error occurred in program CL_HRRCF_QA_TEMPLATE==========CM004 line 29
    Message no. HRRCF0001010
    Diagnosis
    The system detects a technical inconsistency.
    System Response
    The operation will be terminated.
    Termination takes place in:
    Main program: CL_HRRCF_QA_TEMPLATE==========CP
    Subroutine: CL_HRRCF_QA_TEMPLATE==========CM004
    Line in source code: 29
    The error occurred in program CL_HRRCF_SIMPLE_MAIN_OBJECT===CM00A line 45
    Message no. HRRCF0001010
    Diagnosis
    The system detects a technical inconsistency.
    System Response
    The operation will be terminated.
    Termination takes place in:
    Main program: CL_HRRCF_SIMPLE_MAIN_OBJECT===CP
    Subroutine: CL_HRRCF_SIMPLE_MAIN_OBJECT===CM00A
    Line in source code: 45
    Can You please help me what would be the cause of this error.
    Regards,
    Nilesh

  • Very urgent Hrrcf_start_int service --internal error

    Hi all,
    I am having a problem in hrrcf_start_int service. If i test the service its showing an internal error occured. Please suggest me to overcome from this.
    Regards
    Vijay

    Hi Vijay,
    I think HRRCF_START is not executable alone, because somehow called internally from other services.
    The default.htm seams to be SAP standard, if there is not other start page defined as "inital BSP" in the BSP application properties.
    So, if you start HRRCF_START_INT, it should normally work.
    When I open HRRCF_START_INT via http://SERVER:PORT/sap/bc/bsp/sap/hrrcf_start_int/, the system requests a user and password.
    Another idea is to check your customizing for SAP eRecruiting.
    Open SPRO and navigate to SAP E-Recruiting.
    Under Technical Settings -> User Interface you can customize your start pages, which is necessary for HRRCF_START_*.
    In the SPRO you may also find some guideline for eRecruitment implementation. Or just have a look [service.sap.com|http://service.sap.com] and search for eRecruitment HRRCF_START or something like this. There may be some hints for all steps you have to do, before SAP eRecruiting runs properly.
    Regards
    Tobias

  • Internal Error when viewing an activity in E-Rec after a username change

    Hello,
    Hereu2019s a brief explanation of the scenario that we are in:
    u2022 We created a new User ID for an employee because of his/her name
    change.
    u2022 We then attached this new User Id to her HR master records using Info
    Type 105 (IT0105) subtype 1 (ST01).
    u2022 This employee already had her previous User ID attached to his HR
    master records using the same IT0105 ST01. So now, this employee has 2
    IT0105 ST01 records.
    u2022 We transferred these records (old and new ids) to E-Recruiting via
    ALE process.
    To do this ALE process, we executed RBDMIDOC program on the system
    where our HR Master Data reside.
    u2022 Then in our e-recruiting system, we executed RBDAPP01 to process
    these idocs.
    u2022 This processing delimited the old User ID and created a new User ID
    for the same person in the e-recruiting system. We can view this
    relationship in HRP1001.
    u2022 Now, prior to her name change, this person had performed some
    activities on a candidateu2019s records in E-Recruiting. Obviously, these
    activities were performed with his old user ID. So those activities
    have the old user ID associated with them.
    u2022 After sending the new User Id in e-recruiting, when we go to view
    those candidate activities in candidate overview, the system throws the
    internal error message.
    The format that we use for creating usernames is last name first letter of first name, i.e. Bob Jones would look like JONESB.
    At present the only way to remedy the situation is to have the recruiter who's name (and username) changed manually change it for each activity.
    After opening up a message with SAP they responded with:
    Dear Customer,
    That's right. The reason why this recruiter doesn't see his/her
    activities is because they were created under a different user.
    E-Recruiting is designed with a stable CP-US relationship. If you
    do a delimination this can cause problems for the recruiter (as
    mentioned above) as in IT5131 the user is stored as team member.
    If the user assigned to a CP changes, the responsible candidate class
    cannot be instanced anymore. So we strictly recommend not to delimit theCP-US relation.
    Has anyone else experienced the problem?  How did you address it?  It has been my experience to use the name of the employee when creating a username.  This has never been a problem in our core system, just in E-Recruiting.
    Thank you for your help!
    Regards,
    Ryan

    DonSu,
    You have to look at the line above it to gather what's happening.  As I mentioned it making a call to get the contents of the Data Source using GetDataSourceContents.  What you might try is making the same call using Microsoft APIs and PowerShell.
    http://technet.microsoft.com/en-us/library/reportservice2010.reportingservice2010.getdatasourcecontents.aspx
    [string]$folderDestination = "/<Path to Data source>"
    [string]$webServiceUrl = "https://EnterURLhere/ReportServer/ReportService2010.asmx"
    $ssrsProxy = New-WebServiceProxy -Uri $webServiceUrl -UseDefaultCredential
    $DatasourceContent = $ssrsProxy.GetDataSourceContents($folderDestination)
    $DataSourceOutput = $DatasourceContent | Select-Object ConnectString, Extension, Enabled, UserName, WindowsCredentials, CredentialRetrieval
    Write-Output $DataSourceOutput

Maybe you are looking for