ERR REP-0771: After Form trigger failed.

Hi,
Concurrent request fails with the error
ERR REP-0771: After Form trigger failed.
This happen when this job runs when job is scheduled.
But doesn't occur when i manually run this job.

Please review the following note, it may be helpful.
Note: 1080783.6 - REP-0771 AfterPForm Trigger Failed
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=1080783.6

Similar Messages

After Parameter Form trigger failed

REP-0771. I have the trigger returning to false on a condition, however, this is when I get the error. All I want to do is return to the parameter form, and it's giving me an error. Is there any way to suppress this error?

Hi Maggie
To validate a parameter value at runtime:
1. In the Object Navigator, expand the Data Model node, then the System Parameters or User Parameters node.
2. Double-click the PL/SQL icon for the parameter for which you want to add a PL/SQL validation trigger.
3. In the PL/SQL Editor, define the PL/SQL to be triggered at runtime
Validation triggers are used to validate the Initial Value property of the parameter. Depending on whether the function returns TRUE or FALSE, the user is returned to the Runtime Parameter Form.
Thanks
Rohit

"Before Form Trigger Failed" in Oracle Reports

Hi,
I have RDFs stored in the Oracle Reports Server (installed in Solaris Server1). These RDFs access a common package (in compiled status) which resides in Oracle DB (installed in another Solaris Server2).
Everytime whenever there is a change in this common package I compile this and I verify the status to be in VALID status. After this I execute my RDF through a shell script and my report fails with the above error message.
WITHOUT RECOMPILING, when I RE-EXECUTE the report, it works fine.
Can anyone please help me to resolve this issue as it happens everytime in Production when I promote this package to Production DB, compile and execute a report.
The execution of ANY report fails (immediately after compilation) and is NOT consistent with one particular report. What I mean is, any RDF executed after the compilation fails and succeeds when it is re-executed without any changes.
All the file access paths are availables for reading, writing and executing the file.
Thanks in advance!
Regards,
Teenu

After you re-compile your packages,
Open up the affected .RDF's in Report Builder
Choose 'Save As' from File toolbar
Overwrite the existing file in the $reports directory on the server.
For some reason Reports gets "out of sync" so to speak with packages and even local PL/SQL triggers/functions/procs... This is why sometimes even after you compile your local functions and triggers you still get the "Report contains uncompiled PL/SQL" error. Try the suggestion and let me know if it resolves your issue.
HTH,
Steve

After form trigger procedure call

In Reports 6i on a 10g DB the afterform trigger calls a db procedure (in a package) which performs several inserts of "default" data without commit.
The report then selects this data.
The afterreport trigger performs a rollback.
Sometimes this works & others it does not. Most times Reports selects only partial data. I've tried a 10 second delay loop and dbms_lock too.
Is there a way to force Reports to wait for completion of the procedure before parsing and running the queries? Can I call the procedure in a report function to expect the return value?

when the before report fires the queries have already been parsed, probably too late
i've looked into the deletes. there would be at least 17. however the procedure does some updates too, so the deletes are no longer an option.
sorry for poor typing, I have to use my phone due to company policies.
thank you.

Report Builder 6i returns ORA-01483 in after parameter form trigger ?

Can anybody help me ?
I've been working on a report with report builder 6.0.8.11.3,
and whenever i run the report the after parameter form trigger
returns REP-1401 and following ORA-01483.
I've been trying to change the values of some user parameters
from within the trigger code, none of them is a date or a number
parameter, these are character variables who would be referenced
lexically to change a table name dynamically when the trigger
fires. Aditionally I'm using a cursor to obtain data and then
modify the parameters.
How can i get this thing to work ?
Thanks in advance for your reply...

hello,
this might be related to the usage of number(1) as type/length
of your parameter. this is a known problem. it should be solved
by using e.g. number(2) as the type/length of your parameter.
regards,
the oracle reports team --pw

Supplier Merge Fail "Stuck" ERR REP-1401: 'c_update_dup_vendorformula'

My users attempted to merge suppliers and received the error copied below and now all other users (include me (admin)) have the attempted suppliers "stuck" in the supplier merge screen when we open it.
Payables: Version : 11.5.0 - Development
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
APXINUPD module: Supplier Merge Program
Current system time is 07-AUG-2012 15:19:06
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_LAST_UPDATED_BY="2077"
P_SET_OF_BOOKS_ID="1"
P_FA_INSTALLED_FLAG="N"
P_PO_INSTALLED_FLAG="Y"
P_PA_INSTALLED_FLAG="N"
P_INV_INSTALLED_FLAG="N"
P_PN_INSTALLED_FLAG="N"
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.WE8ISO8859P1
LOG :
Report: d:\Applfmsp\fmspappl\ap\11.5.0\reports\US\APXINUPD.rdf
Logged onto server:
Username:
LOG :
Logged onto server:
Username: APPS
MSG MSG-00001: After SRWINIT
MSG MSG-00002: After Get_Company_Name
MSG MSG-00003: After Get_NLS_Strings
MSG MSG-00004: After Get_Base_Curr_Data
MSG MSG-00007: After Custom_Init
MSG MSG-01000: Checking for duplicate tax sites...
MSG MSG-01001: Selecting duplicate vendor sites...
MSG MSG-01002: Modifying recurring payments...
MSG MSG-01004: Selecting duplicate vendors (INV)...
MSG MSG-00100: Updating Invoice id :275274
MSG MSG-00200: Updating ap_invoices.......
MSG MSG-00300: Updating ap_checks......
MSG MSG-00100: Updating Invoice id :276655
MSG MSG-00200: Updating ap_invoices.......
MSG MSG-00300: Updating ap_checks......
MSG MSG-00100: Updating Invoice id :277026
MSG MSG-00200: Updating ap_invoices.......
MSG MSG-00300: Updating ap_checks......
MSG MSG-00100: Updating Invoice id :277027
MSG MSG-00200: Updating ap_invoices.......
MSG MSG-00300: Updating ap_checks......
MSG MSG-01003: Updating Vendor...
ERR REP-1401: 'c_update_dup_vendorformula': Fatal PL/SQL error occurred.
ORA-01422: exact fetch returns more than requested number of rows
MSG MSG-00020: After SRWEXIT
Start of log messages from FND_FILE
End of log messages from FND_FILE
Program exited with status 3
Cause: The program terminated, returning status code 3.
Action: Check your installation manual for the meaning of this code on this operating system.
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 2163883.
Review your concurrent request log and/or report output file for more detailed information.
Executing request completion options...
Finished executing request completion options.
Concurrent request completed
Current system time is 07-AUG-2012 15:19:21
---------------------------------------------------------------------------

Hi;
Similar issue mention for R12. Please see: R12: Supplier Merge Error ORA-00001: unique constraint (AP.AP_HISTORY_INVOICES_U2) violated [ID 843379.1]
If its similar issue like yours you need to rise Sr
Regard
Helios

Calling report from form and after parameter form trigger

Hi, I've also posted to this to the reports forum but because it works from Reports Builder it may be a forms issue which is why I'm x-posting. Apologies.
I have a report that creates a file, desname is set in the after parameter form trigger (it uses one of the parameter values).
The problem is file is not created using the path and filename set in the trigger, the file is created in the bin folder with the name account_by_service_type.txt (account_by_service_type.rdf is the report definition).
If the desname is set in the before parameter form AND a field with the source=desname is added to the parameter form then the file will be created with the correct path and name however it won't have the relevant parameter incorporated into the file name obviously.
I've noticed in other reports that where the desname is being set in the after parameter form that I've had to pass the desname from the form but obviously I cannot do that here either.
Am I missing something obvious?
Regards
Sean

Hi Frank,
It's WebForms. Below is the code:
-- call from menu item
run_report_object_proc(TRUE,'accounts_by_service_type.RDF',null,FILE,'delimited','paramform=yes');
-- run_report_0bject procedure
PROCEDURE run_report_object_proc (p_screen IN BOOLEAN,
                    p_report_filename IN VARCHAR2,
                    p_desname IN VARCHAR2,
                    p_destype IN NUMBER,
                    p_desformat IN VARCHAR2,
                    p_paramform IN VARCHAR2)IS
v_report_id     report_object;
v_report     varchar2(100);
v_job_id     varchar2(100);
v_url          varchar2(1000);
rep_status     varchar2(20);
hidden_action     VARCHAR2(2000)     :='';
BEGIN
v_report_id := find_report_object( 'report2');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_FILENAME,p_report_filename);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESNAME,p_desname);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,p_destype);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,p_desformat);
hidden_action := hidden_action||'&report='||GET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_FILENAME);
hidden_action := hidden_action||'&destype='||GET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESTYPE);
hidden_action := hidden_action||'&desformat='||GET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_DESFORMAT);
hidden_action := hidden_action||'&userid='||GET_APPLICATION_PROPERTY(username)||'/'||GET_APPLICATION_PROPERTY(password)||'@'||GET_APPLICATION_PROPERTY(connect_string);
if p_desname is not null then
hidden_action := hidden_action||'&'||p_paramform||'&desname='||p_desname;
else
hidden_action := hidden_action||'&'||p_paramform;
end if;
hidden_action := '/reports/rwservlet?_hidden_server=rserv1'||hidden_action;
SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_OTHER, 'pfaction='||hidden_action||' '||p_paramform);
-- SET_REPORT_OBJECT_PROPERTY(v_report_id, REPORT_OTHER, 'paramform=no');
v_report := run_report_object( v_report_id);
IF p_screen THEN
     v_job_id := substr(v_report,instr(v_report,'_',-1)+1);
rep_status:=report_object_status(v_report);
while rep_status in ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
loop
     rep_status:=report_object_status(v_report);
end loop;
if rep_status='FINISHED' THEN
     v_url := '/reports/rwservlet/getjobid'||v_job_id||'?server=rserv1';
          web.show_document(v_url,'_blank');
else
     message(rep_status||' error running report');
end if;
end if;
END;
-- report after parameter form trigger
function AfterPForm return boolean is
begin
:desname := 'c:\service_type_'||:p_service_type||'_'||to_char(sysdate,'DDMMYYYY')||'.xls';
return (TRUE);
end;

Problem in Insertion into table through After Report Parameter form trigger

Hi All,
I am getting problem in inserting some data into temp table through Report.
My requirement is like that, I have to do a calculation based on user parameters, and then insert the data into the temp table. I wanted to do this into After Report Parameter form trigger function. I have done all the calculation and wrote all the insert statement in that function. There is no problem in compilation. then I am taking value from this temp table in my formula columns.
When I run this report, it hangs, don't understand what is the problem.Can anybody help me out in this.
Thanks,
Nidhi

The code is as follows:
function AfterPForm return boolean is
CURSOR CUR_RECEIPT(RECEIPT_NUM_FROM NUMBER, RECEIPT_NUM_TO NUMBER) IS
SELECT DISTINCT receipt, item_no FROM xxeeg.xxeeg_1229_sp_putaway WHERE RECEIPT BETWEEN
RECEIPT_NUM_FROM AND RECEIPT_NUM_TO ;
V_CUR_RECEIPT CUR_RECEIPT%ROWTYPE;
begin
OPEN CUR_RECEIPT(:RECEIPT_NUM_FROM, :RECEIPT_NUM_TO);
FETCH CUR_RECEIPT
INTO V_CUR_RECEIPT;
LOOP
EXIT WHEN CUR_RECEIPT%NOTFOUND;
IF V_CUR_RECEIPT.ITEM_NO = 'TEST1' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 12
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 13
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 14
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
IF V_CUR_RECEIPT.ITEM_NO = 'TEST2' AND V_CUR_RECEIPT.RECEIPT = '12' THEN
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 16
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 17
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 18
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
ELSE
INSERT INTO SP_TEMP
(RECEIPT, ITEM_NO, LOCATION1)
VALUES
(V_CUR_RECEIPT.RECEIPT, V_CUR_RECEIPT.ITEM_NO, 10);
UPDATE SP_TEMP
SET LOCATION2 = 19
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION3 = 20
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO =V_CUR_RECEIPT.ITEM_NO;
UPDATE SP_TEMP
SET LOCATION4 = 21
WHERE RECEIPT = V_CUR_RECEIPT.RECEIPT AND ITEM_NO = V_CUR_RECEIPT.ITEM_NO;
END IF;
END IF;
END LOOP;
COMMIT;
CLOSE CUR_RECEIPT;
return(TRUE);
end;
.....................................................................................................................

Difference between After parameter Form Trigger and before Report Trigger

hi,
Can some one tell me difference between After parameter form Trigger and Before parameter trigger.
Why do we need both these trigger , why can't we use any one of them because after parameter trigger will obviously fire before report trigger and similarly before report trigger will fire after parameter form.
Thanks
Ram

Hi,
i will make it clear..!
Actually, we have four type of triggers in reports..!
Before Parameter -- fires before params are suppied to the calling report..
After Parameter -- fires after params are suppied to the calling report..
Before Report -- fires before report is generated..
After Report. -- fires after report is generated..
Before Report and After Report triggers are used for formatting the report design..
like u can specify a report to be displayed based on a condition in the Before
Report trigger and u can specify some backend updations in the after report trigger
which fires after report is generated..

Err while initiating travel form in pr05 after upgrade from ECC5.0 to 6.0

Hi gurus,
I was trying to simulate a trip in pr05. the err "err while initiating travel form" prompt up while initiating. This err only occurs after our ecc upgrade from 5.0 to 6.0. Before it was fine with Standard Travel Form.
Does anyone of you know what's the problem? Any help you would provide will be highly appreciated!
Rgs, Michelle

Hello Michelle,
There is already a possibility to use the HTML form for Travel
Request and Travel Plan BUT is only possible after you apply the
Support Package 09 for EA-HR (SAPKGPHD09).
In table TA20SWITCH you can use the Attribute HTMLFORM_R_P and there
define an entry "X".
This functionality is ONLY delivered with Support Package 09.
Regards,
Raynard

Triggers Firing Sequence Of Forms 10g after commit_form trigger.

hi all,
please tell me Triggers Firing Sequence Of Forms 10g after commit_form trigger.
thanks,
Regards,
Ambarish

Hi,
I have a doubt regarding the sequence of events when COMMIT_FORM is fired.
Using the following to trigger the event.
DO_KEY('COMMIT'_FORM');
Added debug messages in my form triggers and found that after the ON-INSERT trigger is fired, the WHEN-VALIDATE-RECORD is fired and then the PRE-RECORD.
However this sequence is not specified in the lists of firing sequences mentioned here.
Is it possible to change the sequence programmatically.
In my ON-INSERT trigger, calling a DB procedure to insert row in the table.
Thanks
Asfa

FND_REQUEST.SUBMIT_REQUEST is not working in After Report Trigger Reports6i

Hi Guys,
I am calling the another conc program in After report trigger using FND_REQUEST.SUBMIT_REQUEST. The below are the statement which i use in my program.
req_id := FND_REQUEST.SUBMIT_REQUEST('APPL_SHORT','CONC_SHORT',NULL,NULL,FALSE);
I have also use the SRW.USER_EXIT('FND SRWINIT') in Before Report Trigger and SRW.USER_EXIT('FND SRWEXIT') in After Report Trigger also.
I am getting the error in Log file saying that
REP-0736: There exist uncompiled program unit(s).
REP-1247: Report Contains uncompiled PL/SQL.
Quick Response is highly appreciated.
Thanks in Advance.
Regards
Madhan.S

Hi Sawwan,
I was compiled in Unix platform also. If i comment that FND_REQUEST.SUBMIT_REQUEST line it executes fine. It gives the same error in Unix also.
Can anyone pls help this issue.
Thanks in Advance.
Regards
Madhan.S

Error in After Report Trigger

Hi,
I've developed a report in HRMS for my client which collated the Vacation Accrual data of all employees. When i run the report for all employees which is an optional parameter it throwing the below error.
REP-0300: ORACLE error occurred.
REP-0069: Internal error
In-process job terminated:Terminated with error:
REP-300:
During debugging i found that in the After Report Trigger , after the return statement, the below error is being thrown. I couldn't identify the exact source of the error. Any help on this would be much appreciated. Below is the After Report Trigger code.
function AfterReport return boolean is
begin
srw.MESSAGE (12345, 'After Report - Before Return');
return (TRUE);
srw.MESSAGE (12345, 'After Report - After Return');
end;
Thanks
Elango

After spending a lot of time in analyzing, i ripped apart each and every part of the report and found a function where am doing a varchar to date conversion. Then i ran the query individually and picked up the below error.
ORA-01841: (full) year must be between -4713 and +9999, and not be 0
Then i identified the record which has incorrect data and modified it thru applications. Oracle Internal error basically arises due to datatype mismatch and its always better to use exception blocks with log messages wherever its applicable.
Thanks
Elango.

:NEW cannot be used in After Delete Trigger ?

Hi,
Is there any way to get the :NW.value in the After delete trigger for each row. My requirement is audit log of the end user DML operations along with user Name (HERE THE USER IS NOT THE ORACLE USER, BECAUSE OF THE LARGE NUMBER OF END USERS WE ARE MAINTAINING ONE TABLE TO CREATE USER NAME & PASSWORD, WHEN THE USER LOGIN TO ORACLE FORM SCREEN, ASSIGN THE USER NAME TO GLOBAL VARIABLE) & Action Date.
Here is my code for trigger - It is working fine with INSER & UPDATE but for DELETE User is NULL
CREATE OR REPLACE TRIGGER Tgr_stud_det
AFTER INSERT OR UPDATE OR DELETE ON student_details
FOR EACH ROW
DECLARE
BEGIN
IF Inserting THEN
-------------INSERT VALUE---------------
INSERT INTO Log_student_details
(Seq,
App_User,
Action,
Action_Date,
stud_name,
stud_age,
stud_sex)
VALUES
(stud_sequence.NEXTVAL,
:NEW.App_User,
'INSERT',
SYSDATE,
:NEW.stud_name,
:NEW.stud_age,
:NEW.stud_sex);
-------------DELETE VALUE---------------
ELSIF Deleting THEN
INSERT INTO Log_student_details
(Seq,
App_User,
Action,
Action_Date,
Comment_Up,
stud_name,
stud_age,
stud_sex)
VALUES
(stud_sequence.NEXTVAL,
:OLD.App_User,
'DELETE',
SYSDATE,
NULL,
:OLD.stud_name,
:OLD.stud_age,
:OLD.stud_sex);
ELSIF Updating THEN
-------------UPDATE VALUE---------------
INSERT INTO Log_student_details
(Seq,
App_User,
Action,
Action_Date,
Comment_Up,
stud_name,
stud_age,
stud_sex)
VALUES
(stud_sequence.NEXTVAL,
:NEW.App_User,
'UPDATE',
SYSDATE,
'NEW VALUE',
:NEW.stud_name,
:NEW.stud_age,
:NEW.stud_sex);
INSERT INTO Log_student_details
(Seq,
App_User,
Action,
Action_Date,
Comment_Up,
stud_name,
stud_age,
stud_sex)
VALUES
(stud_sequence.CURRVAL,
:NEW.App_User,
'UPDATE',
SYSDATE,
'OLD VALUE',
:OLD.stud_name,
:OLD.stud_age,
:OLD.stud_sex);
END IF;
EXCEPTION
WHEN OTHERS THEN
NULL;
END Tgr_stud_det;
Thanks in advance.

Rizly,
As i mentioned in the above post, you should remove the references of :old and :new when you are trying to use the global variables. These values are only significant when you the talk about the record in the table.
For the scenario, you explained, your trigger would insert two records....The trigger would be fired twice.. once during the insert and once during the delete. The audit table will have two records indicating both the actions..
Take a look at this example below...I am artificially manufacturing a user id in the package test_pkg and using that in the insert trigger. As i explained above, you dont need the :old and :new references because the user id is not a column in the table . hence the :old and :new references have no relevance.
Also note that, for the delete, I use the :old value and for the insert, I use the :new value.
for update, I assume you want to store the old record and hence used :old (you can of course use :new too..technically.).
I don't have access to a forms environement, but the user id logic should be similar to what I described below.
sql> create table t(
2     id number,
3     name varchar2(20)
4 );
Table created.
sql> create table t_audit
2     ( id number,
3       name varchar2(20),
4       action varchar2(20),
5       user_id varchar2(20)
6 );
Table created.
sql> create or replace package test_pkg as
2      function get_user_id return varchar2;
3 end test_pkg;
4 /
Package created.
sql> create or replace package body test_pkg as
2      function get_user_id return varchar2 is
3      begin
4          return 'USER' || to_char(sysdate,'HH24:MI');
5      end get_user_id;
6 end test_pkg;
7 /
Package body created.
1 create or replace trigger trg_biud_t
2     before insert or update or delete on t
3     for each row
4 begin
5     if INSERTING then
6        insert into t_audit values (:new.id, :new.name, 'INSERT',test_pkg.get_user_i
7     elsif UPDATING then
8        insert into t_audit values (:old.id, :old.name, 'UPDATE',test_pkg.get_user_i
9     elsif DELETING then
10        insert into t_audit values (:old.id, :old.name, 'DELETE',test_pkg.get_user_i
11     end if;
12* end;
sql> /
Trigger created.
sql> select * from t;
no rows selected
sql> select * from t_audit;
no rows selected
sql> insert into t values (100, 'Rajesh');
1 row created.
sql> insert into t values (200,'Kumar');
1 row created.
sql> delete from t where id = 200;
1 row deleted.
sql> commit;
Commit complete.
sql> select * from t
2 /
        ID NAME
       100 Rajesh
sql> select * from t_audit;
        ID NAME                 ACTION               USER_ID
       100 Rajesh               INSERT               USER15:36
       200 Kumar                INSERT               USER15:36
       200 Kumar                DELETE               USER15:37

How to reference the total pages in a the after-report trigger

I need to call a procedure in my after report trigger, and send the total number of pages as a parameter. However, a bind reference only applies to columns or parameters.
I have the total pages displayed on my report, I just can't reference that field in my trigger.
Does anyone have any ideas?
Here is a link to my ultimate goal.
Telling Form the number of pages in a report

If any body is curious, I found a work around in Metalink that is working for me now.
Search for Doc ID 130432.1

ERR REP-0771: After Form trigger failed.

Similar Messages

Maybe you are looking for