Err while imp on 10g

Hi I'm new to 10g R2. I installed 10g R2 Database server win2k server. I created one user atjtms, and try to import one dmp file(which was created by ora 8i).
Everything going fine when i click submit job, I getting this error, Anyone can HELP me.
ORA-20204: User does not exist: ATJTMS ORA-06512: at
"SYSMAN.MGMT_USER", line 122 ORA-06512: at "SYSMAN.MGMT_JOBS", line 139
ORA-06512: at "SYSMAN.MGMT_JOBS", line 78 ORA-06512: at line 1
with regds
Ramesh.M

Hello Check this out. It works without any issues Export from 8i to 10g.
-Sri
SQL> create user scott identified by tiger
2 default tablespace users
3 temporary tablespace temp;
User created.
SQL> grant connect, resource to scott;
Grant succeeded.
SQL> @$ORACLE_HOME/sqlplus/demo/demobld.sql
$ exp scott/tiger file=scott.dmp log=scott.log compress=n grants=n
Export: Release 8.1.7.4.0 - Production on Thu Feb 23 14:06:03 2006
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to: Oracle8i Enterprise Edition Release 8.1.7.4.0 - Production
With the Partitioning option
JServer Release 8.1.7.4.0 - Production
Export done in WE8ISO8859P1 character set and WE8ISO8859P1 NCHAR character set
Note: grants on tables/views/sequences/roles will not be exported
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user SCOTT
. exporting object type definitions for user SCOTT
About to export SCOTT's objects ...
. exporting database links
. exporting sequence numbers
. exporting cluster definitions
. about to export SCOTT's tables via Conventional Path ...
. . exporting table BONUS 0 rows exported
. . exporting table DEPT 4 rows exported
. . exporting table DUMMY 1 rows exported
. . exporting table EMP 14 rows exported
. . exporting table SALGRADE 5 rows exported
. exporting synonyms
. exporting views
. exporting stored procedures
. exporting operators
. exporting referential integrity constraints
. exporting triggers
. exporting indextypes
. exporting bitmap, functional and extensible indexes
. exporting posttables actions
. exporting snapshots
. exporting snapshot logs
. exporting job queues
. exporting refresh groups and children
. exporting dimensions
. exporting post-schema procedural objects and actions
. exporting statistics
Export terminated successfully without warnings.
Ftp file to local machine running 10gR2 database.
SRI>create user scott identified by tiger
2 default tablespace users
3 temporary tablespace temp;
User created.
SRI>grant connect, resource to scott;
Grant succeeded.
C:\>imp scott/tiger@sri file=scott.dmp log=scott1.log
Import: Release 10.2.0.1.0 - Production on Thu Feb 23 14:07:22 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to: Oracle Database 10g Release 10.2.0.1.0 - Production
Export file created by EXPORT:V08.01.07 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
import server uses WE8ISO8859P1 character set (possible charset conversion)
export client uses WE8ISO8859P1 character set (possible charset conversion)
export server uses WE8ISO8859P1 NCHAR character set (possible ncharset conversion)
. importing SCOTT's objects into SCOTT
. importing SCOTT's objects into SCOTT
. . importing table "BONUS" 0 rows imported
. . importing table "DEPT" 4 rows imported
. . importing table "DUMMY" 1 rows imported
. . importing table "EMP" 14 rows imported
. . importing table "SALGRADE" 5 rows imported
Import terminated successfully without warnings.

Similar Messages

Error while installing Oracle 10g on Fedora Core 1

Error while installing Oracle 10g on Fedora Core 1. After 40% of the Installation is thru, the progress bar is showing 40%, it gives error "Not connected to Oracle" and the installation has to be terminated.
We have tried by using the on-line procedure and changing the required script to make believe it as said.

Are you createing DB also???

"Error In Writing to directory ..." getting the error while installing oracle 10g in laptop

Hi
I thought I'd make my first post a hijack of a vaguely related thread,
then some kind moderator could separate it out and branch it off to a post of its own.
I'm not even sure this is in the proper forum.
But anyhow ...
i am getting problem while installing oracle 10g in laptop its showing error as "Error in Writing to Directory C:\Users\Accent.Muthu\Appdata\Local\temp\OraInstall2011-03-03-10-51-53 AM.
Please ensure that the directory is writable and has atleast of 45 MB of disk space.Installation can not continue.
so please tell me the solution as soon as possible
thanks,
arshad ayub

Try the few resolutions mentioned here -
forms 10g installation error in writing to directory
Specially -
do not try to install from directory which has a space in its path
TMP and TEMP environment variables are set correctly, preferably to C:/tempRegards,
Anuj

Error while installing developer 10g on linux suse 10.0

Hi All,
This error appears while installing developer 10g on linux suse 10.0
http://img179.imageshack.us/my.php?image=errorso9.png

Try locate (using find command for example) the libjvm.so file (I assume that is located somewhere under $ORACLE_HOME (probably jdk or jre directory)). If you locate the path where this library resides, try to add that path to $LD_LIBRARY_PATH enviroment variable.
Use copy&paste method (for error message) rather than link to image.
It is much quicker operation and it may help to other people because they be able to find this thread via search engine.

Error while installing oracle 10g on centos 5.6 32 Bit

Hi All,
Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed.
[root@staging ~]# find / -name libXp.so.6
/usr/lib/libXp.so.6
/usr/lib64/libXp.so.6
echo $DISPLAY
<ipaddress>:0.0
[oracle@staging database]$ DISPLAY=<ipaddress>:0.0; export DISPLAY
[oracle@staging database]$ id
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba) context=root:system_r:unconfined_t:SystemLow-SystemHigh
Below is the error message I am getting :
oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-37-17PM. Please wait ...[oracle@staging database]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-06-27_05-37-17PM/jre/1.4.2/lib/i386/libawt.so: libXtst.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(Unknown Source)
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at sun.security.action.LoadLibraryAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
     at sun.awt.DebugHelper.<clinit>(Unknown Source)
     at java.awt.Component.<clinit>(Unknown Source)
I found some suggestion on google and tried to not use ip address in DISPLAY settings...
if I am using 0.0 instead of IP below eg.
[oracle@staging database]$ DISPLAY=:0.0; export DISPLAY
The error I am receiving differnt error
[oracle@staging database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-06-27_05-34-40PM. Please wait ...
DISPLAY not set. Please set the DISPLAY and try again.
Depending on the Unix Shell, you can use one of the following commands as examples to set the DISPLAY environment variable:
- For csh:                % setenv DISPLAY 192.168.1.128:0.0
- For sh, ksh and bash:      $ DISPLAY=192.168.1.128:0.0; export DISPLAY
Use the following command to see what shell is being used:
     echo $SHELL
Use the following command to view the current DISPLAY environment variable setting:
     echo $DISPLAY
- Make sure that client users are authorized to connect to the X Server.
To enable client users to access the X Server, open an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
     % <full path to xclock.. see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for xclock: /usr/X11R6/bin/xclock
[oracle@staging database]$ echo $SHELL
/bin/bash
Please help me.

satish.ygl wrote:
Hi,
I am getting the same error when i am applying patchset to 10201 to 10204. I am using RedHat Linux 4 version and I tried set $DISPLAY=<hostname/ip address>:0.0 and export=DISPLAY
#xhost + and checked $PATH this is also is correct
I did these steps still i am getting the following error
pen an xterm, dtterm or xconsole as the user that started the session and type the following command:
% xhost +
To test that the DISPLAY environment variable is set correctly, run a X11 based program that comes with the native operating system such as 'xclock':
% <full path to xclock... see below>
If you are not able to run xclock successfully, please refer to your PC-X Server or OS vendor for further assistance.
Typical path for 'xclock': '/usr/X11R6/bin/xclock'
Please help me in this scenario.
thank You,
Sri
Edited by: satish.ygl on Oct 30, 2012 7:49 PMyou must log onto the DB Server as below (or functional equivalent)
ssh -X oracle@DB_Server
& the first & only command after logging onto the DB Server should be as below
xclock
If/when xclock fails, then OUI will fail.

Error while installing oracle 10g on AIX

I am receiving the following error while installing oracle 10g on AIX..
error in invoking target 'relink' of makefile 'u01/app/oracle/product/10.2.0/orcl/precomp/lib/ins_precomp.mk'..
i am installing enterprise edition. pl help

Hi;
What is AIX version?
Please see:
Installing 10g On Aix 5.3:'Error In Invoking Target 'Relink' Of Makefile ...' [ID 309668.1]
AIX: On Silent Install, Getting Several 'Error In Invoking Target' Messages [ID 351380.1]
"Error invoking target ... of makefile ... " Errors While Installing 8.1.6 [ID 113781.1]
Please also check below and be sure you have all prereq. on your server:
Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
Regard
Helios

Root.sh failed on second node while installing CRS 10g on centos 5.5

root.sh failed on second node while installing CRS 10g
Hi all,
I am able to install Oracle 10g RAC clusterware on first node of the cluster. However, when I run the root.sh script as root
user on second node of the cluster, it fails with following error message:
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
and run cluvfy stage -post hwos -n all -verbose,it show message:
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking shared storage accessibility...
Disk Sharing Nodes (2 in count)
/dev/sda db2 db1
and run cluvfy stage -pre crsinst -n all -verbose,it show message:
ERROR:
Could not find a suitable set of interfaces for VIPs.
Result: Node connectivity check failed.
Checking system requirements for 'crs'...
No checks registered for this product.
and run cluvfy stage -post crsinst -n all -verbose,it show message:
Result: Node reachability check passed from node "DB2".
Result: User equivalence check passed for user "oracle".
Node Name CRS daemon CSS daemon EVM daemon
db2 no no no
db1 yes yes yes
Check: Health of CRS
Node Name CRS OK?
db1 unknown
Result: CRS health check failed.
check crsd.log and show message:
clsc_connect: (0x143ca610) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_db2_crs))
clsssInitNative: connect failed, rc 9
Any help would be greatly appreciated.
Edited by: 868121 on 2011-6-24 上午12:31

Hello, it took a little searching, but I found this in a note in the GRID installation guide for Linux/UNIX:
Public IP addresses and virtual IP addresses must be in the same subnet.
In your case, you are using two different subnets for the VIPs.

What are the things to check after full imp in 10g?

Dear all,
Source
=======
OS server ==> HP-UX
Oracle version ==> Oracle 9.2.0.8
DB Name ==> MSST
DB total users ==> 320
Full export in ==> /u02/export/Jan09.dmp
Tablespaces ==> SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
Destination
============
OS server ==> HP-UX
DB Name ==> CHDB
Existg DB users ==> 20
Oracle version ==> Oracle 10.2.0.4
copied 9i dump file in ==> /u03/export
Tablespaces created same as Oracle 9i i.e;
Tablespaces ==> SC, SC_I, SA, SA_I, PP, PP_I, AC, AC_I, SD
I had run full import on Destination server i.e; Oracle 10g & following is the command i used:
imp system/pwd@conn_string file=/u03/export/Jan09.dmp log=/u03/export/Jan09_imp.log full=y ignore=y statistics=none
Imported successfully with few errors like
Now my question is
===================
How to check everything is same/similar like Oracle 9i database ( source ), for example ( i used this technique ):
What are the things to check after full imp in 10g?
MSST_DB>SHOW USER
MSST_DB>SA
MSST_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE COUNT(*)
DATABASE LINK 2
FUNCTION 23
INDEX 1795
LOB 6
PACKAGE 8
PACKAGE BODY 8
PROCEDURE 30
SEQUENCE 67
SYNONYM 60
TABLE 644
TRIGGER 3
VIEW 20
CHDB_DB>SHOW USER
CHDB_DB>SA
CHDB_DB>select object_type, count(*) from user_objects group by objects;
OBJECT_TYPE COUNT(*)
INDEX 1794
PROCEDURE 30
TABLE 644
TRIGGER 3
VIEW 20
FUNCTION 23
SYNONYM 60
PACKAGE BODY 8
SEQUENCE 67
PACKAGE 8
LOB 6

What are the things to check after full imp in 10g?Only public database links which are in use by your these users which you export/import (Only if you did user level export/import and not DB level).
If you log files does not show error during creation of any object, you don't need to double check any thing. Otherwise do on with the method which you mentioned by counting the objects.
Or you can create a database link from source to destination and use a query with MINUS to find out if there is any object missing
select object_name,object_type from user_objects
MINUS
select object_name,object_type from user_objects@destination_database;Salman

An issue while installing oracle 10g express edition on Ubuntu 10.04-64bit

Hi,
I'm running into an issue while installing oracle 10g express edition on my Ubuntu 10.04-64 bit installed machine using oracle-xe-universal_10.2.0.1-1.0_i386.deb package. The issue actually came up when I was trying to reinstall the package after uninstalling it due to some problem I had with my login credentials. To elaborate further on it, the /etc/init.d/oracle-xe script does not get created when I execute the debian package and thus i'm unable to configure the required credentials and stuff after the installation. I doubt whether this has something to do with the procedure I followed when uninstalling the previous package it. But what I did was just what's mentioned in the following [http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm] user guide published by oracle.
Another important clue would be, the platform of my machine is amd64bit although I'm dealing with an installation package preferred for i386. But I believe it's the only thing available in the oracle software download section. Hence I had to use the --force-architecture option to install it. But after reading some post published on this forum, I've figured out that it does not affect the usual execution of the software. Anyway, I would greatly appreciate some help on this matter.
[1] http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25144/toc.htm
Thanks and Regards,
Prabath Abeysekara
Edited by: 829281 on Jan 18, 2011 7:52 PM

Hi,
Finally I've managed to find a solution for this issue. Thanks a lot for all the replies.
Here's how I got rid of it.
Addressing all the facts one by one,
1.The problem of not getting the /etc/init.d/oracle-xe script generated was avoided
by removing all the configuration files that were previously created while installing
the product. The following command can be used to accomplish that task.
*$ dpkg --purge oracle-xe*
2.Next, Initially the password I used during the configuration process was "admin".
Although I tried a couple of times installing the product providing the aforementioned
password, the web UI kept prompting "Invalid Credentials" message not allowing me
to login. But, this particular issue could be avoided by giving some other simple
password.
Finally, got it working and once again thanks a bunch for taking the burden of
replying this thread.
Cheers,
Prabath

500 Internal Server Error while calling Reports 10g

I am using standalone forms and report services. I am getting intermittently 500 Internal Server Error while calling Reports 10g.

500 Internal error is a generic error and it could be due to multiple reasons like misconfiguration or the dearth of the resources.

Following error occurs while oracle client 10g installation on Linux 5

Following error occurs while oracle client 10g installation on Linux 5
[oraclient@SVHJ0678 client]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-04-14_02-30-53AM. Please wait ...[oraclient@SVHJ0678 client]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-14_02-30-53AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)

user8862191 wrote:
Following error occurs while oracle client 10g installation on Linux 5
What is Linux 5? Do you mean Oracle Enterprise Linux (OEL) 5 ???
[oraclient@SVHJ0678 client]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-04-14_02-30-53AM. Please wait ...[oraclient@SVHJ0678 client]$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2010-04-14_02-30-53AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at sun.security.action.LoadLibraryAction.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
at sun.awt.DebugHelper.<clinit>(Unknown Source)
at java.awt.Component.<clinit>(Unknown Source)

Err while initiating travel form in pr05 after upgrade from ECC5.0 to 6.0

Hi gurus,
I was trying to simulate a trip in pr05. the err "err while initiating travel form" prompt up while initiating. This err only occurs after our ecc upgrade from 5.0 to 6.0. Before it was fine with Standard Travel Form.
Does anyone of you know what's the problem? Any help you would provide will be highly appreciated!
Rgs, Michelle

Hello Michelle,
There is already a possibility to use the HTML form for Travel
Request and Travel Plan BUT is only possible after you apply the
Support Package 09 for EA-HR (SAPKGPHD09).
In table TA20SWITCH you can use the Attribute HTMLFORM_R_P and there
define an entry "X".
This functionality is ONLY delivered with Support Package 09.
Regards,
Raynard

Err while creating Index - ORA-29855: ,ORA-20000

Got err while creating index. We moved the Table to new tablespace and drop the index. While creating index got this err. Col1 is clob datatype.
SQL> CREATE INDEX kc_ctx_RAWTEXT ON RAWTEXT
2 (col1)
3 INDEXTYPE IS CTXSYS.CONTEXT
4 PARALLEL ;
CREATE INDEX KC_CTX_RAWTEXT ON RAWTEXT
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-50857: oracle error in drvddl.ParallelIndexPopulate
ORA-12801: error signaled in parallel query server P020
ORA-20000: Oracle Text error:
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.DRVPARX", line 36
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 364

remove parallel clause and try again

Error while download oracle 10g release2 for linux x-86

Hi,
I got errors while downloading oracle 10g r2 for linux x-86 from
http://www.oracle.com/technology/software/products/database/index.html
i got htis error:
source file not found
contact administrator.
how do i download?

Works for me in western Canada right now.
You might want to try again, and if it still happens try clearing your browser cache and cookies.

This problem appears while installing oracle 10g on enterprise linux

Hi All,
While installing oracle 10g on enterprise linux 5 this message apear:
http://img134.imageshack.us/my.php?image=problemqy2.png
More Info:
Oracle 10g supports redhat 4 and Enterprise Linux is redhat 5 so I changed the redhat-release to 4 to countinue setup but the above error appears, also I tried this configuration on SuSE 10 I changed the SuSE-release to 9 and went good.

The packeges are already installedIf you execute runInstaller again is the error message the same as before?
If yes can you post output for this command?
rpm -qa --qf '%{name}-%{version}-%{release}.%{arch}\n'|grep -i 'libxp'

Err while imp on 10g

Similar Messages

Maybe you are looking for