Erro in Adobe forms Execution

Hello Gurus,
   I have designed the form in SFP transaction, to Execute the form i have pressed F8. I got a screen to enter out put device, i gave LP01. here it is in processing mode only, it is not showing any out put.
Can any one help me out in this issue.......
Thanks,
Feroz.

Hello Feroz,
please make sure, you use a supported plattform for your ADS. The supported plattforms can be found under:
http://service.sap.com/PAM
Best regards,
Dezso

Similar Messages

  • Problem in Adobe Form Execution

    Hi,
    I am getting an error "ADS: SOAP Runtime Exception: CSoapExceptioFault: SOAP(100102)" while executing Adobe Form.
    It seems the ADS configuratoin is not correct. Can some help me out in fixing this issue.

    Hi Sathish,
    To check the Present configuration do the following:
    1.1 Checking by Executing Test Report FP_TEST_00
    Use
    This test report checks if your system is configured correctly for processing forms in an ABAP environment.
    Procedure
       1. Log on to your SAP Net Weaver AS ABAP.
       2. Call transaction SA38 and enter the name FP_TEST_00.
       3. Choose Execute (F8). A dialog box is displayed.
       4. Enter FP_TEST_00 in the field Form.
           This is displayed as the default form name.
       5. Enter the name of the connection to the ADS. Enter the default name ADS, or, if you have               specified another name, the one you are using in your system.
       6. In the dialog box, choose Output in Print Preview.
       7. Enter an appropriate device type in the field Output Device.
       8. Choose Print Preview.
    On successful execution of the report, you find the Print Preview of the PDF form.
    If the Configuration is not correcr no form is displayed.
    The following steps are only necessary, if the result of the above test was not successful.
        2. Check the ABAP Connection
        3. Check the User and Password
        4. Check the Destination Service
    1.2 Checking the ABAP Connection
    Use
    This is a test for checking the RFC destination. This test applies to both connections using Basic Authentication and SSL connections.
    Procedure
    1. Log on to your SAP system.
    2. Call transaction SE38.
    3. Enter the name of the test report FP_PDF_TEST_OO.
    4. Enter the name of the connection. Enter the default name ADS, or, if you have specified another name, the one you are using in your system.
    5. Choose Execute (F8).
    Result
    If the configuration is correct, the system displays the version number of the Adobe document services.
    If the configuration is not correct, the system displays a corresponding message.
    or
    Go to the following link to download the complete ADS configuration guide:
    [https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e4e9afb-0701-0010-f8a8-b8cd093662c2]
    Hope to solve your problem.
    Regards,
    Vaibhav Tiwari.

  • Erro while executing adobe forms in webdynpro

    Hi ,
    Please help me in resolving the following issue while running the adobe form in webdynpro for java on sneakpreview
    java.lang.exception:incorect content type found "text/html"
    thanks

    Hi
    For Adobe Interactive forms in webdynpro ,u need following things;
    1. Adobe life cycle designer installed on ur system
    2. ACF installed
    3. AdobeDocumentService configured on ur system
    I think application/x-pdf  is the suitable mime
    check this
    1 . http://help.sap.com/saphelp_nw04/helpdata/en/20/9727dce8953c4f944aac6e4725b195/frameset.htm
    2 . http://plugindoc.mozdev.org/winmime.html
    3 .  SAP Interactive Forms by Adobe
    Regards
    Abhijith YS

  • Interactive Adobe Forms error while execution....

    Hi,
    <b>I am working on Adobe Forms & developed one application "Online Interactive Form" . After deploying when i try to Run the Appln i am getting following error..</b>
    com.sap.tc.webdynpro.clientserver.adobe.pdfdocument.base.core.PDFDocumentRuntimeException: Severe : PDFDocument is NULL. Exception : Service call exception; nested exception is: java.lang.Exception: Incorrect content-type found text/html
    atcom.sap.tc.webdynpro.clientserver.uielib.adobe.impl.InteractiveForm.afterHandleActionEvent(InteractiveForm.java:385)
    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.afterApplicationModification(ClientApplication.java:1117)
    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.afterApplicationModification(ClientComponent.java:887)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doRespond(WindowPhaseModel.java:573)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:152)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:297)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:706)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:660)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:40)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
               atcom.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    <b>I searched on SDN & come to know few points that may be it is bcoz of SP Level difference between WAS & ADS..But not getting any way for how to check this.??
    My senior told me that they are at same SP Level..if this is the case what is the other possible reason for getting this error...??</b>
    Waiting for reply !
    Thanks in advance !
    Smita.

    The password for the ADSUser is probably not correctly configured. Check the following:
    1. Login to the visual admin
    2. Go to <server node> -> Services -> Web Services Security
    3. At the runtime tab select Web Service Clients -> sap.com - > tcwdpdfobject
    4. Select com.sap.tc.webdynpro.adsprox.AdsProxy*ConfigPort_Document
    5. At the Transport Security tab check the basic authentication, user should be ADSUSER and you can reenter the password with the correct password. Save the configuration.
    6. Navigate to Services -> Deploy
    7. At the bottom select the application radiobutton
    8. Select sap.com/tcwdpdfobject and stop the application  (right hand side of the screen)
    9. when it is stopped, start it again
    10. test the web service again as described above
    You can use <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/06717aea-0c01-0010-b28f-e6494458788f">this guide</a> to configure ads.
    Regards,
    Christophe

  • Error while executing adobe form

    Hi All,
          I am working on an adobe form in development system everything is working perfectly, But the form is giving an exception ()when executed in quality system .I did remote comparison of both layout and interface and there are no changes.
         What i observed is when i execute the form in SFP in dev system it is creating an FM , But in quality system execution of form in SFP is giving me error saying "Error in include information for function module /1BCDW/0000000007" and when i try to check this FM in SE37 it says it does not exist.
      Please let me know if anyone has faced similar issue before and if you have found the solution.
    Regards,
    Anjana Rao

    Hi friend,
    Its simple.
    The same problem exists in Smart forms also.
    What you need to do is you need to give the Adobe form name to the function module "FP_FUNCTION_MODULE_NAME".
    It will return you a name just you need to substitute that in the form call.
    Because for each and every system the function module number generated for the Adobe form differs.
    Just see the link below its for smart form, just adapt the same for Adobe forms, see my post and use the above function module instead of the one in the link [Smartform error|http://forums.sdn.sap.com/thread.jspa?threadID=2127306&messageID=11037853#11037853]
    Do this it will solve your problem.
    If any queries please revert back to me i will help you.
    Thanks,
    Sri Hari
    Edited by: srihari.kumar on Feb 13, 2012 3:52 PM

  • Adobe Forms function module - downloading the xstring output in PDF file

    Hi Guys,
    I'm using Adobe forms and fetching its output in an XSTRING PDF format. How can I download this XSTRING output to a PDF file and store on the local file system?
    I'm using the following approach to getting a PDF output:
    ls_outputparams-getpdf = 'X'.
    CALL FUNCTION 'FP_JOB_OPEN'
      CHANGING
        ie_outputparams = ls_outputparams.
    * Get the name of the generated function module
      CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
          i_name     = 'ZADOBEFORM'
        IMPORTING
          e_funcname = lv_fmname.
      IF sy-subrc <> 0.
      ELSE.
    *   Call the Adobe Form function module
        CALL FUNCTION lv_fmname
          EXPORTING
            /1bcdwb/docparams  = ls_docparams
          IMPORTING
            /1bcdwb/formoutput = ls_form_output
          EXCEPTIONS
            usage_error        = 1
            system_error       = 2
            internal_error     = 3.
        IF sy-subrc <> 0.
        ENDIF.
      ENDIF.
    * Close the spool job
    CALL FUNCTION 'FP_JOB_CLOSE'.
    Now, the variable LS_FORM_OUTPUT-PDF contains the PDF output in XSTRING. My question is how can I download this as a PDF file to my local machine.
    Kind Regards,
    Shailesh.

    hi guys,
    im using all FM to download my PDF adobe but in this part :
    ls_spfli-carrid = 'AA'.
    ls_spfli-connid = '0017'.
    APPEND ls_spfli TO it_spfli.
    flag                     = 'X'.
    is_address_type          = '1'.
    is_address_number        = '22515'.
    is_person_number         = '22517'.
    is_country               = 'IN'.
    *&--- Call the generated function module
    CALL FUNCTION '/1BCDWB/SM00000200'
       EXPORTING
    *   /1BCDWB/DOCPARAMS        =
         it_spfli                 = it_spfli
         flag                     = flag
         is_address_type          = is_address_type
         is_address_number        = is_address_number
         is_person_number         = is_person_number
         is_country               = is_country
      IMPORTING
        /1bcdwb/formoutput       = fp_formoutput
      EXCEPTIONS
        usage_error              = 1
        system_error             = 2
        internal_error           = 3
        OTHERS                   = 4
    I have usage_error knowing that the execution of the function module in SE37 pass successfuly and also the execution of the forms .
    in your opinion what can be the problem?
    Kind Regards,

  • How to avoid Print pop-up while using a Adobe form.

    Hi Experts,
    I am calling a adobe form from a BAPI.I am using the following function modules FP_FUNCTION_MODULE_NAME and CALL FUNCTION fun_name. But when I try to execute the BAPI a print preview pop-up appears.Please let me know the steps to avoid the print preview pop-up while execution of the BAPI.
    Thanks in Advance.
    Warm Regards,
    Arun.

    Hello
    I don´t understand the connection between BAPI and the printing program. I guess - at least that is what I have done - is to generate the form when creating and invoice or something, then I could understand.
    When you ask for GETPDF = 'X' then you always get the PDF data back and not the popup.
    Or if you would like to display the print preview without a print settings popup. Or variants...
    FUNCTION ZPDF_SET_OUTPUT_MODE.
    *"*"Lokální rozhraní:
    *"  CHANGING
    *"     VALUE(FP_OUTPUTPARAMS) TYPE  SFPOUTPUTPARAMS
    fp_outputparams-dest     = 'ZPDF'.
    fp_outputparams-nodialog = 'X'.
    fp_outputparams-preview  = 'X'.
    ENDFUNCTION.
    regards Otto

  • Adobe Form called from SAP Portal, not executing interface global init code

    Hello!
    I have an adobe form called from both R/3 and SAP Portal and I need to show long text dinamically calculated.
    The deal is at the SAP Portal execution, as scenario characteristics don't allow string definitions, I'm using 255 characters tables (QISR_TAB_TYPE), that I'm trying to convert inside form interface (Global init code).
    The problem is that the interface global init code is being executed when the form is called from R/3, but it is not at SAP Portal.
    Does anybody know how to manage this? It's kind of a problem that the BAdi method int_service_request_init doesn't allow types over 255 characters... and if it is not possible to access the form interface code section (maybe there's any way)... i need to find some code section where i can convert tables before the form context is filled!!
    Thanks a lot!!
    Regards,
    Diana.

    Hi,
    have you searched on SCN? There are some threads with same problem such as [this one|/message/9270216#9270216 [original link is broken];. There is more threads. They may help you to solve your issue.
    Cheers

  • Problem in Webdynpro and Adobe form with signature field

    Hi experts!
    I have a problem with Signature Field in Adobe Form showed in a Web Dynpro Abap.
    During the execution I fill the Signature field correctly but when I push any other button of the Webdynpro, the Adobe Form shows me the next error.
    After click OK, the webdynpro is hang and not respond.
    Any idea why not respond?
    Thanks.

    Hi friend,
    Its not like that the Adobe created using SFP is non interactive.
    We can create interactive forms using SFP transaction using java code.
    I think it will be the problem with ADS just check with your basis people i think they will configure you the settings which works fine.
    To check whether the settings are perfect you can try executing the standard programs FP_TEST_00 and
    FP_PDF_TEST_00. If it works fine then some other problem exists else check with your basis team.
    Just check this and revert me if you have any issues. I will help you
    Thanks,
    Sri Hari

  • DB2 Connectivity Trough ADO Objects in Adobe Form Designer

    Hi,
    We are using
    Adobe Workflow Server 6.2 and
    Adobe Form Designer 5 to develop forms. In forms we have to display some information retrieved from IBM's DB2 database at two different stages. First at the beginning of the process, for which we have scripts in the process which are working fine. Second at run time, i.e., the user will enter ID of an employee and we have to retrieve the corresponding information of that employee. For that we are using ADO objects, provided in the form designer.
    The problem that we are facing is that these forms uses ActiveX controls and they are executed on the client's PC. At run time when we try to access the DB2 database we get an ODBC error:
    [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified, because the DSN is on the server not on the client's PC. The forms are working fine on those PC that have DB2 client installed on them.
    We want that ADO object to be executed on the server not on the client's PC. Is there any way or doing so? Or is there any other solution?
    Please let me know asap as I have been facing this problem for many days.
    Thanks.
    --Khan.

    Khan--
    Your best bet in my opinion would be to drop the use of the Adobe ADO Object and switch to one of the following db connectivity scenarios.
    - MS Remote \ RDS; has some MS security draw backs but allows remote access to a db from a single DSN.
    "+" : Much faster to deliver
    "-" : Have to work around MS server \ browser security issues
    - Custom solution using xml DOM \ SOAP calls to pass your data requirements to an ASP \ ASP.NET component. This component would be used to execute the sql statement read from xml package then return that result back to the form.
    "+" : Increase in performance due to server side execution, very little MS Security implications
    "-" : Not a quick solution to build as it involves many different components to function
    Hope this helps somewhat...

  • Adobe form error in BSP controller

    Dear Friends
            How are you?
            I am attaching one adobe interactive from in my bsp application. I have created the form and interface both are activated. while attaching adobe form to bsp application I am having error in controller class's method do_request. the erro says that "Function call aborted: Function l_name could not be found".  can you please tell me where I am making mistakes. I will greatly appreciate your reply. Any help will be appreciated.
    Thanking you
    Regards
    Naeem
    Pleas see the following code.
    runtime->server->response->delete_header_field( name = 'Cache-Control' ).
      runtime->server->response->delete_header_field( name = 'Expires' ).
      runtime->server->response->delete_header_field( name = 'Pragma' ).
      data: l_name type rs38l_fnam.
      data: f_name type fpwbformname.
            f_name = 'ZTRAVEL_REQ '.
      try.
          call function 'FP_FUNCTION_MODULE_NAME'
            exporting
              i_name     = f_name
            importing
              e_funcname = l_name   <--- I m failed to receive l_name here,,  so it gives
            exceptions
              others     = 0.
        catch cx_fp_api_repository.                         "#EC NO_HANDLER
        catch cx_fp_api_usage.                              "#EC NO_HANDLER
        catch cx_fp_api_internal.                           "#EC NO_HANDLER
      endtry.
    when i debug more and run method directly I received the error  like
    Access via 'NULL' object reference not possible.
    and error location is
    runtime->server->response->delete_header_field( name = 'Cache-Control' ).
    I have run function module by passing form name i come to know that it gives me the l_name on return,
    Thanks.
    Regards
    Naeem
    Edited by: Naim Khan S Babi on Sep 29, 2009 6:55 PM

    Re: ADOBE Error in PCR
    see this.. u might get some idea..
    GS

  • Adobe form translations

    Hi,
    I have translated adobe form from English to French, however when i execute function module by passing language as 'FR' it is still showing in English only. what could be the reason??
    and also when i open the same form in DE language i don't see any layout it is almost empty, do i need to anything here.

    Hi - Same EN to FR translation not working.
    I am creating froms in 100 client and then testing in 200 client.
    Initially I was seeing English texts when I executed in client 200 with logon language as FR.
    I observed I had the below error in SE63 long text Translation screen "Omitted Objects (Could not be Converted):" with Yellow warning.
    SE63 -> Long Texts -> Objname = form name -> EN to US -> EDIT -> CHange the english texts to French texts -> and save ->
    Omitted Objects (Could not be Converted):"  is seen and you will remain in the same screen how many times we save.
    This happens when I save after making the Translations and save.
    Then I implemented notes 1488663 & 1552974 Notes.( Kranthi - you may check these forms )
    Sometimes now translation works and sometimes it does not.
    Repeating the changing the texts to FR and saving - When luckily Translations got saved one time - I logged into FR language and displayed the form in SFP  and checked the layout - all texts seen in FR . but when I executed the form from the same screen ( SFP ) - surprisingly I see english texts.
    after repeated executions - Suddenly I say French texts appearing.
    Then I found one Text still in english,
    When I goto SE63 and change it - surprisingly now I see the same error again "Omitted Objects (Could not be Converted):".
    I am not sure the note 1552974 really works removing the additional </trans-unit> - becuase I see so many of them even now.
    I also tried executing a standard form from SFP in FR login language.It works fine.it displays all texts in FR.
    Not sure why this is not working for Cusotm developed forms.

  • Overlapping two tables in adobe form

    Hi
    I have a requirement to print details based on different bill numbers in different pages. 
    I have two internal tables 
                    1. it_inrt  containing two fields 
                    2. it_prts containing four fields  .
    Tthese two tables are looping separately. during program execution it_inrt overlaps it_prts. my question is that how to prevent this overlapping i want to print it_prts only after printing all rows of it_inrt and the excess rows will continue in  the next page.
    Please help me to solve this problem.

    Hi,
    You have to 2 internal tables right,
    You have to print the data which is in First internal table and same for second internal table..
    Place thes to tables(one after another ) in Desgin page of - Adobe forms..
    Under page there is  Untitled content area and renamed as ( page area 1)
    In hierachy tab -  By default you will see the Untiled Subform page ( Here drag the First Internal table to here and change the   subflow as flowed ,pagiantaion as continued in untitled area). add another internal table to this form..
    create a new page with only Untitled content area and renamed as ( page area 2)
    Steps:
    Select Untitiled subform - under pagination - Place Select ( In content area of page area 1 )
                                              if dataset must be paginated -  overflow to ( Go to content area of Page area 2 )
                                            - under subform - make the content as flowed and check the allow page breaks within content.
    Regards,
    PraVeen
    Edited by: praveenreddys on Feb 21, 2012 3:53 PM

  • Adobe form -- multiple copies issue

    Hi experts,
    using VF03, when i print adobe form with multiple copies automaitically spool is generated with 2 copies.
    but my problem is in the first copy price value at the bottom of the page is displayed, but the same price value in the second spool is displayed as ZERO.
    my adobe form has a custom driver program.
    how to go ahead with this issue.
    Regards,
    Jayant.

    sounds like the custom driver program is processing the form twice with data clear values occurring between the two executions.  Are you sure the program sends once with a copy counter set to 2?

  • Adobe Form configuration error

    Dear All,
    I have configured my adobe forms on an abap+java stack. once i try running a program on tcode: SFP, on execution it gives the following error:
    System Error
    FPRUNX
    Message no: 001
    Could you please help me sort this problem.
    Thanks!

    Hi,
    I think you have a java stack. So  just login to your java stack using visual admin then navigate as below
    Cluster>services>Destinations
    Double click on it then you will find the destinations on the right hand side, navigate to http
    then create new destination by clickin on the new button at the bottom
    Name the new rfc as FP_ICF_DATA_<SID>
    Then enter the url as http://server:port here port will be abap http service port (normally it will be 8xx1, check in smicm)
    enter the remaining details and select the authentication as basic and enter the adsuser and password for it.
    save and test dont worry if it fails.
    Now execute the program. Your pdf configuration should work fine now:
    Please refer the below link if you have any problems:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
    Regards,
    Vamshi.

Maybe you are looking for