Erro while creating MIGO - Update terminate

Hello All,
While creating MIGO with ref to PO i am getting the following error
Update was terminated
System ID....   SAN
Client.......   120
User.....   PURCHASE1
Transaction..   MIGO
Update key...   5756D3E59A5B420DAA800130EFC8ECAC
generated....   22.09.2009, 11:42:18
completed....   22.09.2009, 11:42:20
Error Info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC\
Can any one help me,
thanks & Regards,
Abhinay Waikar.

HI i checked with number range in material document its ok.
Can any one explain me how intervals works for phys inventory document
SPRO-MMinvent--Number range for mtl & physical inv document.
When i try to post migo doc here the number coming by the interval of 10
How can any one explain me.
Abhinay
Edited by: Abhinay Waikar on Sep 23, 2009 2:28 PM
Edited by: Abhinay Waikar on Sep 23, 2009 2:37 PM

Similar Messages

Part 1 generated while creating migo but display mode Excise tab not appear

Hi
I created migo Part 1 generated. and excise tab also appeared.
but while display mode Excise tab not appearing. In table J_1part1 Part 1 details are updated.
Please explain What could be the reason
Regards
sitaram

Hi
Please any body give me valuable suggesition.
Thanks and regards
sitaram

Erro while creating Database in 9i

I ve Installed Oracle 9i in Windows xp in Pentium 4 m/c while creating database its giving the following Error
java.io.FileNotFoundException:c:\oracle\oraServer\admin\DEVPOS\pfile\init.ora
Please Provide solution

Did you checked if the pfile is at this location and has the same name?
Regards
Demetrios

File-to-idoc erro while creating IDOC

Hi,
I am working FIL-TO-IDOC scenario.
my idoc : DESADV.DELVRY03.
while creating IDOC in target end created with error status 51.
the error is POSEX field is empty.
I gave the value for POSEX then i tried it is giving another error..'field POSEX is empty'
actully what i need to give for POSEX.
where do i find the POSEX value for delivery document.
Please can any one help me to create succefully with Delyry03 idoc.
I have another douts also..to create the Delivery document IDOC is DESADV.DELVRY03 is correct or not...if any other IDOC's is there to create delivery document.
Regards,
venu.

Hi Venu,
<i>>>>I have another douts also..to create the Delivery document IDOC is DESADV.DELVRY03 is correct or not...if any other IDOC's is there to create delivery document.</i>
This IDOC is the right one.
POSEX is the external item number. How many line items are there, I mean how many delivery items are there? Are you sure you are assigning POSEX for all the records?
Thanks,
Prakash

"cannot find this class" erro while creating Background Callable Object.

Hi All,
I am facing "cannot find this class" while creating Background Callable Object.
I followed the following document for Creating Background Callable Object.
[Creating Callable Objects for Background Execution|http://help.sap.com/saphelp_nwce10/helpdata/en/53/cde385301f4aa3b8e77a92cd46bff3/frameset.htm]
After giving the fully qualified java class name in the Implementation Class Name when i press next i am getting the error.
Please suggets me in solving this issue.
Regards,
S.V.Satish Kumar
Edited by: Sathish Kumar SV on Apr 4, 2009 10:34 AM

Hi, kavita.
First, make sure you choosed the correct container when you created the background CO.
Second, make sure your package name was "com.examples.bckgco" and class name was "UserDetailsCallableObject". The exception which you got just means you entered incorrect name.
It doesn`t relate to your program.
Best Regards.
Louis Huang.

OSS Note for MIGO "Update terminate (SAPSQL_ARRAY_INSERT_DUPREC)"

Dear all
I am facing problem during MIGO GR reference Others, MVT 561.
Upon clicing Button: Save, I face 2 types of errors intermittently
1. Material document is saved and generated but when comes to displayed, it will say "Document 4900496xxx does not exist in calendar year 2009" And I check in Table: MKPF and it does not exist at all
2. I am not able to save it and face this termination error:
The ABAP/4 Open SQL array insert results in duplicate database record
What happened?
Error in ABAP application program.
The current ABAP program "SAPLGLIU" had to be terminated because one
statements could not be executed.
This is probably due to an error in the ABAP program.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and adminis
termination messages, especially those beyond their normal deletion"
I have done my investigation and the number range uder FBN1 for this MVT 561 under this Company Code and Year has been maintained.
Can anyone advise me the OSS note to solve it? I cannot find a direct OSS note on it to solve this.
Thanks.
Edited by: Daimos on Oct 26, 2009 7:58 AM

Sorry Jurgen
I have posted so many material documents using MIGO to test it out and try to update my OMBT there so many times until I lost track what is the current number range when I wrote my question here.
I have read that thread you posted regarding the ST22 analysis [Solution from Jurgen|Document does not exist after creation of PO; . I exported them to HTML and did a detail checking, and I find out it is FI GL there did not update the number range properly which in turns cause my GR to have problems.
Below is my analysis and learning to share with others:
1. Ask the ABAPER to find out which record value the system trying to insert. Copy down this number.
2. Check the OMBT value of Current Number.
3. Then use the MFPK Table to search the latest Number Range.
4. Try to check if the record value trying to insert already exists in Current Number. Normally, it will exist and that is why
    system prompt "insert duplication".
5. Then check if the record value trying to insert already exists in MFPK Number. Normally, it will exists it will exist and that is
    why system prompt "insert duplication". (There can be situation that the Current Number is lower than the MFPK Number,
    but it rarely happen).
6. Replace the Current Number to be the Next Number of MKPF largest Number. Save and it should work.
7. If it is not work, please create a material which is non valuated and perform GR, if GR can be done and we can display
    material doc, it means the error is caused by the FI GL number range error.
8. There can be other issues such as activation of user exits and other.
Jurgen, I got one more question to ask you. I have tried to replace the current number with the largest number of MKPF without + 1. It can solve my problem.
But I wonder why SAP Notes and you suggest us to replace Current Number with largest MKPF value PLUS 1?
Please advise.
Thanks.
Edited by: Daimos on Nov 2, 2009 8:41 AM

While creating migo error 08 2011 is not found

pls
help me iam getting error in migo 08 2011while posting
Edited by: prashanth.k.s. on Aug 11, 2011 8:50 AM
Edited by: prashanth.k.s. on Aug 11, 2011 8:51 AM

Hi,
You cannot revert back once the MMPV is intialized you can only allow back posting for one month in MMRV.
For reverting the Posting periods refer the below OSS Note it may help you..
OSS note: 487381
Summary
Symptom
For period closing with initialization, the system displays a message saying that period closing cannot be started.
Before you start period closing with initialization, you must be aware of the consequences of period closing with initialization.This note describes the possible data inconsistencies that might occur if you carry out the initialization in a productive system.The resulting inconsistencies are not to be traced back to a system error but they are a result of the period closing program with initialization.
Hence, these inconsistencies can only be corrected within the remote consulting purchased separately since normally you no longer need to start the period closing program with initialization in a release > Rel. 4. 5.
Other terms
MMPI, PIINKON, MMINKON, RMMMINIT, MMINKONH, history records, MARDH, MBEWH, MM016, MM 016
Reason and Prerequisites
The prerequisite up to Release 4.6C is the implementation of Note 369637.
Solution
In order to be able to have the period closing program running, you must reserve parameter ID MMPI_READ_NOTE with the current date in the user parameters with the current date in form YYYYMMDD (Y = year, M = month, D = day).
If you already need this additional security beforehand, implement the attached correction instructions and create SET/GET parameter MMPI_READ_NOTE.The SET/GET parameter belongs to development class MG and should have the following short text:
'Follow the instructions in Note 487381 before initialization '.
In addition, change message MM(016):
'Follow the instructions in Note 487381 before initialization'.
The SAP system works with the period concept of stocks.In the system, postings are updated precisely to the period.The inventory balances of the current and of the previous period are relevant to posting.As of Release 4.5, the history concept of the inventory balances has been introduced as an enhancement.
Bear in mind that the initialization of a posting period has the following effects concerning the period stocks:
The initialization of the posting period to a previous or to any posting period may lead to the loss of the information of the inventory balances of the previous periods.The book value of the current posting period is taken as the basis also for values of the previous period in this case.
If you want to continue working with this new posting period, in addition you should execute report Z_DEL_HIST_ENTRIES attached so that history entries greater or equal to the new posting period will be deleted.
If you have to briefly reset the posting period by one period (for example, postings must still be posted in a certain period) just to make a correction (and for a small number of postings), you should initialize the posting period back again to the old value so that the values of the previous period will not be lost (you should forbid postings when carrying out corrections).
However, afterwards the values of the previous period or the history records (as of Release 4.5) of the materials posted in this case are inaccurate.
You should NOT execute report Z_DEL_HIST_ENTRIES in this case.
However, if the posting period is generally reset again to a previous posting period and if postings were made during this time, all information on the inventory balance of the previous periods is lost.
As of Release 4.5a, you should use the cited correction report Z_DEL_HIST_ENTRIES in order to delete history records that are more current than the current posting period.Otherwise, it can result in deviations (inconsistencies) for the update of the history records.
Important! If there are open physical inventory documents that have status 'counted' or for which indicator 'Freeze inventory balance' has been set, you should reject these if they refer to a previous period or have been created in the former previous period.The inventory difference to be posted can be determined from the current book value of the previous period and the book quantity frozen in the physical inventory document (ISEG-BUCHM) and does not match the inventory balance of the previous period that is currently valid.

Erro while creating a new user

Hi,
I tried to create an user. In the mass_user.txt i had given the complete details.
When importing the mass_user.txt, from user administration, getting error:" E-mail Address cant be empty".
Plz assist.
Regards,
Dhanu

Dear Dhanunjay,
You can login into portal and try to export details for admin user to get the right format. To export go to Identity Management-> search user with which you are logged in. Select it. Click Export. The export details format will appear on screen.
Same format you have to use for ur mass import.
However it is like this only:
[User]
uid=ABCD
role=
email_address=[email protected]
first_name=Atul
last_name=Shrivastava
country=IN
language=en
com.sap.ip.collaboration.ume:onlinestate=Autodetect
Regards
Atul Shrivastava
PS:Award points for helpful answer.

Erroe while creating FM

Hi Gurus,
I am creating a new Function Module ,Syntacticallly it is correct but when I am trying to activate it , I am getting an error REPORT/PROGRAM statement missing,or program type is I (Include) .
Can U please share a solution for this.
Thank U very Much in advance.

Hi,
Activate the function group program,
Click on attribute tab-> Double click on function group-> click on main program
activate the all the includes in it. there will be 3 includes
or
check the errors in function modules in that function group
include <functio group>uxx
Regards
Krishna

While creating Update rules -"Error Info source does not exist"

While creating an update rule I am getting an error that Info source doesnot exist though the inf source is active.
here is error:
No communication structure exists in version abc... A
Message no. RSAU251
Diagnosis
In order to be able to maintain the update rules an active communication structure must be available.
Procedure
This error message can have two causes.
No active communication structure exists.
Activate the communication structure in the Data Warehousing Workbench.
No communication structure exists for the InfoSource.
Create a communication structure in the Data Warehousing Workbench for the InfoSource.
<<text removed>>
Thanks,
Vasu
Edited by: Matt on Apr 26, 2010 9:31 AM

Hi Vasu,
as it clearly shows below message
No communication structure exists for the InfoSource.
Create a communication structure in the Data Warehousing Workbench for the InfoSource.
Create an info source first and assign it to your datasource and map the fileds in transfer rules and activate it.
Then try to create the update rules between your target and info source.
Hope this helps.
Regards,
Reddy

Getting a error while creating a product

hi
I am getting a error "please check the user set up" while creating and updating a product in iStore Administrator. System Admin user is able to create a product and also to update.Even assigned the all the roles and enrollments as such as for system admin user. Still i am getting the error.
please help me out to get red of this error.
regards
Nafisa

Hi Neel,
As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
Thks for yr help.
Regards,
Nilesh

How to update the condition price in sales order while creating the invoice

Hi,
How to update the condition price in the sales order to carry out the new price while creating the invoice?
While creating the invoice it should update the condition price in sales order.
Thanks,
Balaram

No, pricing is not there in delivery.
I found an exit for VF01transaction where we can update the price in order.
Can you please tell me how to update the price if I have the order, material numbers and conditions number?
Thanks,
Balaram

Erro: "Error while creating table 'EDISEGMENT'"

Pessoal bom dia,
quando eu vou Ativar uma Regra de Transferência retona o seguinte erro:
Error while creating table 'EDISEGMENT'
não estou conseguindo desvendar o que pode ser isto, e a regra não ativa de jeito nenhum.
Alguém já passou pelo problema?

Please post this in the Portuguese Forum...
Regards
Juan

DSO error while creating update rules

Hi All,
i am new to BI 7.0 , while creating update rules for datastore object , i have given the infosource name, and tried to activate it, then i got the error,
ERROR: infoobject 0recordmode is missing from the infosourse
Can any one help, points are assured for the suggestions
Thanks in advance
Peddinti

Hi,
Add 0recordmode info object to your info source and again try to create DTP, 0recordmode is requried in DSO to keep data with history.(like before image,after image,etc), by adding this you dont have any problem, at the time of creating info source itself system will prompt you that this info object is missing do you want to add here say yes.
Regards
Sankar

While creating po, the vendor material no should updated in PIR.

hi all,
i am facing one issue
the issue is, while creating po, we can search the material no according to vendor material no, but when we change the vendor material no in po item details in material tab and save the PO, that is updated in the PIR, if we tick the box(info update), that means the new no is update in PIR,
but suppose i entered the wrong no, so i want to edit that field again. but the new assigned no is not updating the PIR though i have checked the check box(info update)
that means, PIR is updating once but not second time. what is the possible solution.
regards,
susanta
Edited by: susanta bindhani on Jun 26, 2008 8:27 AM

hi pankaj,
read the issue perfectly,
supoose i have created PO, i have entered in the field of vendor material no-123, ok. and i tick the box(update PIR).
then i save the Po, i saw the change in PIR- 123
after i gone to change mode- me22n, thr, i again change the vendor material no to 456, ok, and i save the PO, then i saw it in PIR,
but no change. the field no is showing -123.
my question is why PIR is not updating second time only once.
pls give me some suggesion, my client need it urgantly.
regards,
susanta

Erro while creating MIGO - Update terminate

Similar Messages

Maybe you are looking for