Erron in CIN

HI Experts,
I am getting an error when I am saving excise invoice through J1IIN. I also created number range also with t-code SNUM. but unable to solve.
ERROR: Error in allocating Excise invoice number Interval not found Number object J_1IEXCLOC
Message no. 8I336
please advice me.
thanks in advance.

Hi,
maintain the number range in J1I9 or SNUM for the object J_1IEXCLOC. also check that you have maintained the number ranges for all series group, it might be possible that you have missed one of the series group for which you are creating excise invoice.
Thanks,
Ritesh

Similar Messages

Error Reading Header File When Creating a CIN

Hello everyone. I am a college student new to LabView and Im using the
software to create a real time data acquisition system for EMG signal
analysis for a research project. However, Im having difficulty building
a CIN for my C code. I am using Microsoft Visual Studio.NET 2003 and
running LabView 7.1 on Windows XP. I am using the "Using External Code
in LabView" (April 2003 Edition) manual and I am attempting to do the
steps located in section 3-15 under Visual C++ IDE. However, I keep
getting fatal error C1083: Cannot open include file: 'extcode.h': No
such file or dir. I have followed all of the directions in the manual
and even explicitly tried adding extcode.h to my project but I
still get this error. My version of Visual Studio is different then the
one described so I was wondering if there is something different that I
have to do in this process. Any help would be greatly appreciated.
Thanks for your time.
Pat

Is there a particular reason you're not using a Call Library Function Node to call a DLL instead of using a CIN? Calling DLLs from Call Library Function Node are usually a much more user-friendly process, which I would recommend, unless you need to take advantage of the extra features listed on page 1-4 of Using External Code in LabVIEW.
Jarrod S.
National Instruments

How do I use the WriteToMemoryXX functions in a CIN?

I'm getting a linker error "unresolved external reference _WriteToMemory16" when I compile the C code that contains the calls to the WriteToMemory16 function. I've installed the accesshw files and am including the accesshw.h file in my C-code CIN. It would seem that I need to compile-in the code for the WriteToMemory function, which I assume resides in accesshw.c.
My application calls for some direct hardware i/o that falls in the "too messy to do in a block diagram" catagory. I'm using Labview 5.1.1 and talking to a Keithley Metrabyte PIO-96 card.
Thanks very much for any assistance.

Ben,
Thank you for the response. I looked at the examples you mentioned, but unfortunately I'm still unsure what to do. As mentioned, I downloaded the accesshw.zip file and installed the files in order for me to use InPort and OutPort VIs in my program on an NT box, which I'm doing and is working fine. Also, I downloaded the example, "PCI-DIO using AccessHW_DLL.c". This C file contains calls just like the ones I want to use (calls to WriteToMemoryXX) in my CIN C code to basically do the same operations as are done by the InPort and OutPort VIs. Is there a makefile available for that C file? Maybe if I knew how to build that file into a CIN, it would be the same process for me to build my file into a CIN. There is an include file in the "PCI-DIO using AccessH
W_DLL.c" file that I don't have (ansi_c.h), but I don't get a compiler error when not including this file in my C file so
I assume I don't need it. I've got the accesshw.dll file in the same directory as my .c file, as instructed to do on the accesshw.zip download page.
I'm developing the CIN using MSVC++ 4.0 if that helps.
Thanks very much,
Jeff

MM period opening/closing in CIN

Dear All,
After go live the users are entering the backlog date of the pervious months.
the data of August is still not complete so the periods are not closed and they want to making entries in Sept.
if we allow back period posting and close the august month and open the sept month, what will be the issues-
<b>especially in CIN.</b>
the sales activities are still pending.
the client is forcing for this. can anybody guide on this issue or have sap documentation on this can forward me at;
[email protected]
thanking you in advance
regards
ramprasad

thank you very much vikas,
any impact on utilisation, excise registers enteries and internal serial number in register
what i see is say somebody is posting excise invoice for the month of august and system has taken the number as 5. say afterwards somebody post for the month of sept. then it will get internal excise number as 6.
so the sequence of excise invoices captured will not remian as per month.
if you can visualise anything more ,for advice will be of great help.
regards

FDMEE - unable to load an erronous file

Hello,
I created an HFM and FDMEE application.
I was able to load a flat file, whose dimensions' values were identical to the metadata.
I tried loading a file with values that are not in metadata, to see a validation report, but I keep getting this:
BLANK............. Line is blank or empty.
NN................ Non-Numeric, Amount field contains non numeric characters.
TC................ Type Conversion, Amount field could not be converted to a number.
ZP................ Zero Suppress, Amount field contains a 0 value and zero suppress is ON.
SKIP FIELD.............. SKIP field value was found
NULL ACCOUNT VALUE.............. Account Field is null
SKIP FROM SCRIPT.............. Skipped through Script
[TC] - [Amount=NN] L 0 1 0 8 1 4 0 1 4 0 , 1 1 1 0 1 0 0 0 , [ I C P N o n e ] , [ N o n e ] , [ N o n e ] , [ N o n e ] , B a s e , 2 0 0 0 0 0 0
[BLANK]
[TC] - [Amount=NN] L 0 1 0 8 1 4 0 1 4 0 , 4 2 0 0 1 1 0 1 , [ I C P N o n e ] , [ N o n e ] , l i l , [ N o n e ] , B a s e , - 2 0 0 0 0 0 0
Rows Loaded: 0
Rows Rejected: 3
2015-03-11 13:03:35,929 INFO [AIF]: ERPI-105011:EPMERPI- ARCHIVE MODE: null
2015-03-11 13:03:35,929 INFO [AIF]: ERPI-105011:EPMERPI- Start archiving file:
2015-03-11 13:03:35,929 INFO [AIF]: ERPI-105011:EPMERPI- Archive file name: 6720141231.txt
2015-03-11 13:03:35,929 INFO [AIF]: ERPI-105011:EPMERPI- Deleting the source file: Testload4.txt
2015-03-11 13:03:35,929 INFO [AIF]: ERPI-105011:EPMERPI- File not deleted: \\Hfmap01\fdm\FRUTDEV\Testload4.txt
2015-03-11 13:03:35,945 INFO [AIF]: ERPI-105011:EPMERPI- ImportTextData - End
2015-03-11 13:03:35,945 INFO [AIF]: ERPI-105011:EPMERPI- Total time taken for the import in ms = 31
2015-03-11 13:03:36,085 INFO [AIF]:
Import Data from Source for Period 'Dec 2014'
2015-03-11 13:03:36,101 INFO [AIF]: Generic Data Rows Imported from Source: 0
2015-03-11 13:03:36,101 INFO [AIF]: Total Data Rows Imported from Source: 0
2015-03-11 13:03:36,990 INFO [AIF]:
Map Data for Period 'Dec 2014'
2015-03-11 13:03:37,006 ERROR [AIF]: Error: No records exist for Period 'Dec 2014'
2015-03-11 13:03:37,037 FATAL [AIF]: Error in CommMap.updateTDATASEG_T_TDATASEGW
Traceback (most recent call last):
File "<string>", line 1775, in updateTDATASEG_T_TDATASEGW
RuntimeError: Error: No records exist for Period 'Dec 2014'
2015-03-11 13:03:37,037 FATAL [AIF]: Error in CommMap.updateTDATASEG_T_TDATASEGW
Traceback (most recent call last):
File "<string>", line 1982, in updateTDATASEG_T_TDATASEGW
RuntimeError: [u"Error: No records exist for Period 'Dec 2014'"]
2015-03-11 13:03:37,115 FATAL [AIF]: Error in COMM Map Data
2015-03-11 13:03:37,115 INFO [AIF]: FDMEE Process End, Process ID: 67
Not sure what it means and how I can test the mapping.
Please advise..
Thanks
Laila

Thanks for the quick response.
The flat file I load contained 2 rows (it was a test load).
The correct file, that I was able to import, validate and export to HFM included these 2 rows:
L0108140140,11101000,[ICP None],[None],[None],[None],Base,2000000
L0108140140,42001101,[ICP None],[None],[None],[None],Base,-2000000
The erroneous file that I wasn't even able to import included these 2 rows:
L0108140140,11101000,[ICP None],[None],[None],[None],Base,2000000
L0108140140,42001101,[ICP None],[None],lil,[None],Base,-2000000
The only difference is in one of the dimensions lil instead of [None].
I wanted the system to show me that the value wasn't mapped so it cannot proceed in the export to HFM.
Any ideas?
Thanks.

Reqd. T-code in which list of customers display with CIN Details

Dear All,
Is there any t-code in which the List of Customers with cin details Display?Like the MKVZ,
this is the t-code for List of Vendors Display.
Thanks,
Sumit.

Dear Sir,
I have found another t-code VCUST for customer detail but in this CIN DETAILS are not there.
so pls. suggest something...
Thanks,
Sumit.

Batch Selection config. in Excise Invoice Creation (J1IJ) at Depot in CIN

Hi,
In the business scenario that I have to map in SAP system stock transfer occurs from Plant to Depot. Then the batch is split at the Depot and minor changes are made to characteristic. These individual small batches and then sold to the end customer from depot.
<b>Problem:</b> If the batch number is kept the same at depot as the incoming batch number, system is able to find the incoming invoice in J1IJ. If the batch number is changed (to mark individual characteristic) then the system in not able to idetify the incoming batch.
Please help...
In SAP help link http://help.sap.com/erp2005_ehp_02/helpdata/en/09/ebf138cdd78a4be10000000a114084/frameset.htm I could find mention that "You can also automate this procedure, using the batch selection program (J_1IJCHK), by making the appropriate Customizing settings in the Country Version India (CIN) Implementation Guide (IMG)." Can anyone help by elobarinting what specific configuration is to be made for batch selection?
Thanks
Rajat

Hi,
SAP has released a SAP note 1001446 which can be implemented for your requirement. There is an user exit J_1I7_USEREXIT_BATCH_CHK_FLAG which has the parameter NO_BATCH_CHK_FLAG. If you pass the value ' X' to the parameter NO_BATCH_CHK_FLAG then the batches will not be checked during J1ij. you can implement this user exit through SE37.
Regards,
Murali

CIN - BED, AED & SED for the excise item is ZERO

DEAR ALL,
I am testing the CIN scanario with tax procedure TAXINJ.
While making GRN at excise invoice tab message is coming " BED, AED and SED for the excise item is zero" adn no any values for BED, AED and SED are flowing,
Value for BED is maintained in J1ID for the chapter ID. Also Tax code is created with JMO1 - IN: A/P BED deductible and value mainatained is 14 %.
PLease confirm me where I amd doing wrong ? Also please tell in TAXINJ on what paramaters the excise flows and shows the values while GRN OR whil posting a excise invoice ?
Regards,
Rakesh

Dear ALL,
Below are the steps / settings I have done,
01. Copied TAXINJ to create tax procedure say ZAXINJ and assigned to country IN.
     - Please confirm what needs to be AltCty & AltCBV for JMO1, JMOD, JMOP ?
02. Excise defaults maintained as per TAXINJ for ZAXINJ.
03. Acces sequenece maintained for JMO1, JMOP, JMOD is MWST - Tax code.
04. Then created Tax code say T1 - and % maintained as below
       JMO1 - 100 %
       JMOP - 100 %\
05. J1ID - maintained for vendor, plant, material etc.
05. Excise rate maintained in J1ID for chapter ID as 14 %.
06. Chapter ID maintained in material master.
07. PO created for the material with tax code T1 for the said vendor.
Still while GRN message comes "BED, AED & SED for the excise item is ZERO" and BED is not getting populated for BED.
Please confirm where I went.
Waiting eagerly for the valuabale inputs..
Regards,
Rakesh

CIN process to enter Excise Invoice for Return Delivery

Folks
I would like to know How to process excise invoice for return delivery. We have return sales order, return delivery created and product is received into inventory Customer return Blocked stock (movement 657).
Where and How can i enter Excise invoice for this return (Credit Memo)?
I tried J1IH transaction--> Other Adjustments
I am getting following error.
GL account has not been assigned for RG23ASED in customization
Message no. 8I447
Diagnosis
GL account has not been assigned for the excise a/c in customization
Procedure
Assign GL a/c for the excise a/c in CIN customization under : Accounting -> Assign GL accounts to excise groups and transaction types"
Please help

J1IIN is intended only for outgoing sales and not for returns.
For updation of excise related sales returns, run J1IH and do the following:-
Customer Credit
Choose the Additional excise input the original excise invoice reference, document year, company code, plant and excise group and execute. There input manually what value you need to give credit and save.
Cenvat Debit
Choose Other Adjustment and here also, maintain the datas whatever you input as above and save.
G. Lakshmipathi

Central Excise and WHT Settings in CIN Version for 4.6C

hi sap gurus,
i need urgent support from your end regarding Central Excise and WHT Settings in CIN Version for 4.6C. I am new to CIN Version, and now i deputed to the same.
can any body give the configuration of the Central Excise and WHT Settings in CIN Version for 4.6C.
kindly revert back asap.
thanks and regards,
raghav

Hi
Go to transaction code J1iln you get all the details on CIN or you can go to logistics general > tax on Goods Movement in SPRO
Anand

ICloud accidentally set-up with erroneous email acct. How do I reset the email originally used to start the Apple ID? I'm stuck in a loop...

Hi Apple friends! Here's my frustrating situation. When I got the new computer (2012 Macbook Pro), I tried to set up iCloud but accidentally input an erroneous email acct. I cannot access iClod because the email was accidentally input as "[email protected]", not "[email protected]". How do I reset the email originally used to start the Apple ID? I'm stuck in a loop, and not only cannot use iCloud, but I keep getting messages popping up to register my iCloud with a non-existent email...
Help?
Sincerely,
Cole
[email protected]

Have you tried to go into System Preferences > iCloud and entering the correct information there? You will first have to "sign out" of the wrong account and then log in with the correct information.
If that does not work you should direct follow up to the iCloud for Mac forum.

How can I complain about erroneous charges to my ITunes account?

I have had multiple erroneous charges to my ITunes account which ITunes deny is their fault and say I have to ask bank for the refund, also they take approx 5 days to answer any email. I need an email address of someone higher up in customer service who might actually care.

... however you can deauthorize older computers you no longer need to have authorized to your account to make way for a new one. If you have access to specific machines you can deauthorize individually inside iTunes, otherwise you can deauthorize all, then (re)authorize the machines you want.
See HT1420: iTunes Store: About authorization and deauthorization.
tt2

I received an erroneous "per request" downgrade email (saying I had downgraded to free account) but my account was charged $20.00! I had never requested a downgrade! Why? And what has happened to my data in excess of 5 GB storage??

I received an email from Apple about fifteen minutes ago saying that "per your request" I had downgraded to a free account for iCloud. But I had made no such request! In fact, I had expected Apple to charge me $20.00 for a full 15 GB of storage. And Apple in fact did charge my bank card for that amount! But when I check the Apple device, an iPod Touch (4th Gen) for my iCloud storage status, it states that I had "exceeded" my free 5 GB! This is absurd, since Apple owes me a full 15 GB based on the fact that it has charged my bank card for the amount of $20.00 for that storage option.
To make things worse, the device nevertheless contradictorily refuses to let me "upgrade" to the $20.00 option on the relevant screen (since obviously the truth is that I have a full 15 GB and the information on the screen recognizes this fact), even as it continues to state on an earlier screen that I had only 5 GB, not 15 GB, of storage (and had exceeded it).
So the bottom line is that 1. Apple sent me an erroneous notice that I had "downgraded" to a free account when I had done no such thing; 2. My iPod now relates two contradictory stories about how much storage I really have (as noted in the second paragraph above); and 3. I'd like to know what happened to the data I already had in storage that had already exceeded 5 GB -- did it get erased?
I've been charged $20.00 for a full 15 GB and yet still have nothing to show for it but the 5 GB free account! Worse yet, I may have lost data (as the storage used before all of this happened was a little over 6 GB already).
Message was edited by: peaceandstrength

I have the same problem. For about 1 month ago I extended my iCloud storage account (+20 GB) in order to maintain my backups for iPHONE and iPAD as my account would expire 14/10. In spite of this, I got an email 15/10, which said that iCloud was reduced to 5 GB. 2 hours later I received a new email with comfirmation on the purchase of +20 GB storage plan. However, I only have access to 5 GB on my iPad and iPhone. Called Apple Support but they couldn´t help me. Did you find any solution ?

Cin-no enough balance for utilization---excixe invoice

hi gurus,
when i am updating excise registers using t.code J1I5
i am getting the following error
*Not Enough Balance for utilisation*
Message no. 8I578
Diagnosis
The balance in the Account is not enough to carry out the current transaction.
Procedure
You need to increase the balance by either taking credit or depositing into PLA.
kindly help me
how to update the registers?
thanks and regards
munichandra babu
sloution1
Are you sure you are getting this when you do J1I5? You can deposit some amount to the register you are trying to update the material into through J1IH > Additional excise.
Please check if you have set any default in the table "Utilisation determination" (SPRO >LG >India > Business transaction > Outgoing excise > utlisation determination") If you have set 100% utilisation to happen from PLA then you have to upload some balance into PLA a/c through J1IH > TR6C , else use J1IH > Additional excise for Rg23A and C.
Sloution2
If you use J1i3 tcode for creating excis einvoice then the system will go for immediate utilization of the cenvat account and if there is no enough balance ie; cenvat from purchase is less then u will end with the above error message.
So in that case we cn go for J1iin tocde for creating exciose invoice.
Then the utilization will be done at the end of the month while submitting the returns to excise authorities.
and also just check out the procedure that is followed in ur company and go accordingly.
If they wanna go for immediate utilization then check whether they have made any TR6 challan payment and do the posting in system in tocde j1ih ---tr6 challan and increase the PLA BED balance and then do J1i3.
Sloution3
Hope u r updating the RG1 register. As there is no enough balance while creating outgoing excise , do the J1IH - TR6 Challan posting or J1IH - Additional excise to take credit entries of Cenvat.
Sloution4
Check the Configuration of CIN.
IMG >> Logistic General >> Tax on Goods Movement >> India >> Business Transaction >> Utilization ....
Sloution5
The details are very clear.
what is the balance do u want to carry out.
The error clearly mentioned the avilable balance is not enought to carry out the current transaction.
Please increase the balance by either taking credit or deposting into Personal Ledger Account.
hi gurus,
while creating excise in voice using the t code j1iin
i am getting the following error
Excise modvat accounts not defined for TR6C transaction and 2 excise group
Message no. 8I402
kindly help me
munichandra babu
sloution1
hi,
go to this path : Logistic Genral==> Tax on Goods Movement ==>India ==> Account determination == > Specify GL Acounts per excise transaction..
here u have to maintain ur Excise Grp, TR6C, Company code, chat of A/C and correct GL account.
I created a excise invoice for factory sale. While updating the register
J1I5 Update the RG 1 and Part I registers
it is not simulating. Why is there any customization setting i have to do or what?
kindly help in this matter
Sloution1
Hi,
You need to set the movement types that are relevant for various registers.
spro -> Logistics general ->Tax on goods movement -> India -> Business transaction -> Incoming excise invoices ->Specify which movement types invoilves excise invoices.
Please check that.
Sloution2
First create receipt entry for Classification Key "RMA" for movement type 101 and then create for Goods Issue with Key "IDH" for movement type 601
Also check in SPRO > Logistics - General > Tax on Goods Movements > India > Business Transactions > Incoming Excise Invoices > Specify Which Movement Types Involve Excise Invoices > Here specify 101 and 601 for RG1 Register.
While creating excise invoice. the invoice not picking up the value aed,bed . In billing document the condition is appearing
I put H in PR00 still it is happening like that
kindly help in this matter
Sloution1
pls check the condition type defined at the step, is it the same as used in Billing doc where the excise value is coming.
SPRO > Logistics - General > Tax on Goods Movements > India > Determination of Excise Duty > Maintain Excise Defaults
Sloution2
You need to check two things if condition values are not copied to the excise invoice.
1. Go to Logistics General>Tax on Goods movements>India >Basic Settings>Determination of Excise Duty>Maintain Excise Defaults
Here you need to maintain your condition types of your BED, Ecess, SHE cess in A/R BED cond, A/R Ecess cond and A/R AT1 cond. Then try to cerate excise invoice.
2. Go to Logistics General>Tax on Goods movements>India >Basic Settings>Determination of Excise Duty>Condition-Based Excise Determination>Classify Condition Types
Here you need to assign your condition types of BED total Ecess total and SHE cess total if you are using totals condition types. Otherwise you leave it blank.
Let me know still you have peoblem in this.
Sloution3
All Excise Component and Cess Totals (JEXT,JEAT,JEST and JECT) must have Statistical Checkbox marked in V/08.For the Condition records totals, select the Key Combination: Sales Organization with value: 100%.
Can you specify what Key combination for Basic Excise Duty (JEXP) you are using? I prefer the Country/Plant/Control Code/Material combination.
It is not out of context to mention here, that whatever your Condition Type for Basic Price (PR00 - ZPRI in my case) is, it must have the 'Condition Category' as H - Basic Price in V/06. This is an extremely important setting until made this setting,all Excise Calculations will go into a tizzy.
Check out the above and let me know.
Best regards,
Sloution4
The condition type which you are using as base value should have the condition category as H.....check this out and let me know...
Cheers
Sloution5
pls also check the configuration setting done at :
SPRO > Logistics - General >Tax on Goods Movements > India > Basic Settings
Sloution6
Thats means you need to have a balance for utilisation.
To solve this you can do one of the two things.
Create some puchase orders in MM. Whenever you purchase the excise duty is credited into your Rg23A part2. This will show in your utilisation balances in J2iun.
Or else you can post some amounts into PLA accounts in J1IH transaction using JVs.
I hope your configuration on all these accounts in LG- Tax on goods - Account determination is in place. If not you may have to do that before this.
Sloution7
If you use J1i3 tcode for creating excis einvoice then the system will go for immediate utilization of the cenvat account and if there is no enough balance ie; cenvat from purchase is less then u will end with the above error message.
So in that case we cn go for J1iin tocde for creating exciose invoice.
Then the utilization will be done at the end of the month while submitting the returns to excise authorities.
and also just check out the procedure that is followed in ur company and go accordingly.
If they wanna go for immediate utilization then check whether they have made any TR6 challan payment and do the posting in system in tocde j1ih ---tr6 challan and increase the PLA BED balance and then do J1i3.
Sloution8
are you sure you are getting this when you do J1I5? You can deposit some amount to the register you are trying to update the material into through J1IH > Additional excise.
Please check if you have set any default in the table "Utilisation determination" (SPRO >LG >India > Business transaction > Outgoing excise > utlisation determination") If you have set 100% utilisation to happen from PLA then you have to upload some balance into PLA a/c through J1IH > TR6C , else use J1IH > Additional excise for Rg23A and C.
Sloution9
Hope u r updating the RG1 register. As there is no enough balance while creating outgoing excise , do the J1IH - TR6 Challan posting or J1IH - Additional excise to take credit entries of Cenvat.
Please maintain the customizing settings for automatic utilization
Excise modvat accounts not defined for TR6C transaction and 2 excise group
Message no. 8I402
Sloution1
Go to IMG Path -- Logistics-General --> Tax on Goods Movements --> India --> Basic Settings --> Maintain Series Groups.
Here for the combination of your Series Group and Excise Registration, select the box Imm util This will solve your first issue
For your second issue, again select the next tab Account Determination and click on Specify Excise Accounts per Excise Transaction. There maintain as follows:-
ETT::SubTmTy::::DC Ind:::::::::::Account Name
TR6C::::::::::::CR Credit::::::PONHLD PLA on hold account
TR6C::::::::::::DR Debit:::::::PLAAT1 PLA AT1 Account
TR6C::::::::::::DR Debit:::::::PLABED PLA BED account
TR6C::::::::::::DR Debit:::::::PLAECS PLA ECS Account
TR6C::::IP::::::CR Credit::::::ONHOLD CENVAT on hold account
TR6C::::IP::::::CR Credit::::::PONHLD PLA on hold account
TR6C::::IP::::::DR Debit:::::::PLAAT1 PLA AT1 Account
TR6C::::IP::::::DR Debit:::::::PLABED PLA BED account
TR6C::::IP::::::DR Debit:::::::PLAECS PLA ECS Account
TR6C::::IP::::::DR Debit:::::::RG23BED RG 23 BED account
TR6C::::IP::::::DR Debit:::::::RG23ECS RG 23 ECS Account
Once you maintained the above, click on next level Specify G/L Accounts per Excise Transaction. Here for the combination of Excise Group, Excise Transaction Type (TR6C) and Company Code, maintain the relevant G/Ls and save.
Sloution2
Create the Excise Group and assign the Modvat a/cs.
Sloution3
go to this path : Logistic Genral==> Tax on Goods Movement ==>India ==> Account determination == > Specify GL Acounts per excise transaction..
here u have to maintain ur Excise Grp, TR6C, Company code, chat of A/C and correct GL account.
Sloution4
go to this path : Logistic Genral==> Tax on Goods Movement ==>India ==> Account determination == > Specify GL Acounts per excise transaction..
here u have to maintain ur Excise Grp, TR6C, Company code, chat of A/C and correct GL account.
STILL I AM GETTING THE SAME PROBLEM
KINDLY HELP ME
WHERE I HAVE TO MAINTAIN THE BALANCE FOR PLA A/C
t.code or path
THANKS AND REGARDS
munichandrababu

Hi Munichandra Babu,'
Goto J1IH and select TR6C and then select the accounts for which you want to post the amount. Enter the amount and Save. Before saving dont forget to post the cumulative accounts amount in PLA on Hold Account.
Best Regards
Sri

Unit of measure conversion for CIN is not relevant for pricing

During creation of Ad item type order, when we enter the planned ad size e.g. A CO (Columns) x B IN (Inches), the system is showing a message "Unit of measure conversion for CIN is not relevant for pricing" and pricing is not determined in the Billing Data Set. However if the planned ad size is maintained as A CO (Columns) x B MM (Millimeters), there is no impact to pricing conditions.
Any light how to fix this issue?
Thanks,
Suseela. V

Dear Suseela,
You need to maintain Unit of conversion using transaction code JH51. You have to follow the path Logistics-Advertising Management-Master Data-Conditions-Order/Billing Document-UM for Pricing.
Here you can maintain combination using Booking Unit, Content Component, Design type and assign Unit of Measure to get relevant pricing into billing set conditions.
Hope it will help. Thanks!
Regards
Indra

Erron in CIN

Similar Messages

Maybe you are looking for