Erroneous text in the incoming header

Hi,
I recently find the last sentence of an e-mail of my own which I sent out weeks ago in the header of in-coming mails under
From: (any sender)
CC: no matter what
Date: ....
From: the certain sentence/with no relations whatsoever to the incom-
ing mail)
Very strange, what is there to do?

Manfred,
I don't have enough info, yet, but this may be similar what is being discussed in the topic at the following link:
http://discussions.apple.com/message.jspa?messageID=3021083#3021083
Tell us what the Long Headers, and Raw Source display on this incoming message?
Ernie

Similar Messages

A text on the invoice header It is copied from the customer master

Hi need to create a text in smart form the requirement is as below
Its a text on the invoice header.It is copied from the customer master to the order than to delivery and finally on the invoice.
Regards
Rasheed

Hi!
You have to write a code in your SMARTFORM for this.
First you have to read the customer master data from the table KNA1.
Then you have to read from the SD order and invoice, this can be found in table VBPA.
Regards
Tamá

How to add texts to the Header Text in the PO header

Hi
In our system, some already added remarks are appearing in the PO header text field when i open a PO. I wanted to edit the remarks appearing in the PO header as a default. I wanted to know where these predefined texts are filled in. Appriciate if you can help me findout the same.
Thanks
Venkat.

Hi
In the above said configuraiton path, they have mentioned "Purchase order" in the source object and the "Header Text" in the source text.
But i wanted to konw where the below mentioned genereic Notes/Remarks will be entered. For all the purchase orders, this text is autmatically get copied into the header text. i wanted to know from where it is originating and where we are maintaining.
"Notes / Remarks :
Vendor's signature on the attached PO terms and conditions is an integral part of this PO
All documents should have a PO number
Invoices should be submitted to the attention of the Finance department
Please attach a PO copy with all claims to avoid delay in receiving payment.?"

BAPI for adding text in the delivery Header Text Tab?

Dear All,
We are using the SAP standard BAPI to create the delivery Document by inputing sales order number.
The issue is that the customer is maintaining the Truck number in the delivery Header Level Text Tab, now he wants that he will give the sales order number and truck number as inputs the BAPI as to create the Delivery document and the truck number should appear in the Deliver header level text tab ("Truck No" text object maintained)
Please suggest asap.
Regards,
Javal;

Dear Javali,
Have you tried the function module 'CREATE_TEXT' ?
Check and revert back.
Thanks & Regards,
Hegal

Bex Variable Value as Text in the report heading

Hi
We have fiscal year as a Bex variable and the user is prompted to enter a value when running the report.
I have found that it is possible to add a filter to a report text box (Cell) by creating a formula and adding this to the cell contents.
However, is it possible to add a Bex variable to display as text in a report header. For example the user enters Fiscal Year = 2012 and the report header displays "Headcount for 2012".
Any comments would be appreciated.
Thanks
Ian

Hai
Yes Possible u can use the formula
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/80e0bf7d-f374-2b10-f2b5-df8065a545af
Thank u
Naveen

Dynamic Text in the Page Header

Hi Gurus,
     I have a small requirement i.e., changing the text of title on page header UI element based on condition. if create then create data else if it is display then display the info some thing like that.
   Kindly can some help me regarding this....
Regard
Sankar

Hi Sankar,
Create on eattribute of type String and bind to title property of page header,
and your WDDOINIT or any event write code to set title for PG header,
You are using different buttons, use this code in your buttons and change text.
DATA lo_el_context TYPE REF TO if_wd_context_element.
DATA ls_context TYPE wd_this->Element_context.
DATA lv_pg TYPE wd_this->Element_context-pg.
* get element via lead selection
lo_el_context = wd_context->get_element( ).
data pg1 type string.
pg1 = 'selected the record'.
lv_pg = Pg1.
* set single attribute
lo_el_context->set_attribute(
    name = `PG`
    value = lv_pg ).
In button 1..
lv_pg = 'Enter the entries'.
* set single attribute
lo_el_context->set_attribute(
    name = `PG`
    value = lv_pg ).
Cheers,
Kris.

Regarding the FM 'CREATE_TEXT' to writer text in the header

Hi all,
I am writing the text in header by using the FM 'CREATE_TEXT', in this we will pass the tables as it_tline,
this it_tline is declared as
data :    it_tline TYPE STANDARD TABLE OF tline WITH HEADER LINE.
this tline table is having 2 fileds,
TDFORMAT
TDLINE
   is that first field will repressent the column and sendcodn will be the test for that column..
Please correct me if i m wrong...
if the it_tline contains the data like this means
TDFORMAT    TDLINE
    01               SVB34334334,suresh
    02                SVB25876666,Ch
then how it will write in the header.. please clarify me..
i gave the model how i m calling the FM in the below..
for writing the text into the invoice header
CALL FUNCTION 'CREATE_TEXT'
        EXPORTING
          FID               = c_z122
          FLANGUAGE         = sy-langu
          FNAME             = gv_param
          FOBJECT           = c_vbbk
         SAVE_DIRECT        = 'X'
         FFORMAT            = '*'
        TABLES
          FLINES            = it_tline
       EXCEPTIONS
         NO_INIT           = 1
         NO_SAVE           = 2
         OTHERS            = 3         .
      IF SY-SUBRC <> 0.
      MESSAGE I111 WITH text-005.
      ENDIF.
Thanks,
Suresh

Please look at FM SCMS_DOWNLOAD .. to know how this is
used ...
If U can download it onto your desktop .. U'll get the file

How to add the Row count(number of rows in table) in the table header?

Hi,
I'm having a table. This table is viewed when i click on a search button.
<b>On the table header it should dynamically display the number of rows in the table, i.e., the row count.</b>
How to do this? could any one explain me with the detailed procedure to achieve this.
Thanks & Regards,
Suresh

If you want to show a localized text in the table header, you should use the <b>Message Pool</b> to create a (parameterized) message "tableHeaderText" like "There are table entries".
Next, create a context attribute "tableHeaderText" of type "string" and bind the "text" property of the table header Caption UI element to this attribute.
Whenever the table data has changed (e.g. at the end of the supply function for the table's data source node), update the header text:
int numRows = wdContext.node<TableDataSourceNode>().size();
String text = wdComponentAPI.getTextAccessor().getText
IMessage<ComponentName>.TABLE_HEADER_TEXT,
new Object[] { String.valueOf(numRows) }
wdContext.currentContextElement().setTableHeaderText(text);
Maybe you want to provide a separate message for the case that there are no entries.
Alternatively, you can make the attribute calculated and return the header text in the attribute getter.
Armin

Text in the document line item

Hi,
In COI, I am doing reclassification using document type.
System has posting the documents correctly, but strange thing is in the document header text, it was giving some text by itself.
Example of the actual text in the document header is as below:
"3B586AF9C74AF958DC4EFAB080B180B6D2E90F25"
Thanks in Advance,
Richard

Hi Dan,
You are correct. The text is coming by itself while doing Reclassification for dividend at PL 30.
Still confused why it is throwing some text in the document header..
Regards,
Richard

How to change the column heading as the column changes

dear memebrs,
Take an example fo the table EMP. I need to create a report whose parameters are the table column names. so depending on the parameter(which is the column name) the report o/p changes.
so i am dynamically selecting the table column names and getting the o/p. The problem is when the column changes the heading of it in the report o/p is not changing.
we have to use format trigger for this, but i am not sure what code should we write in the format trigger of the boiler plate text of the column heading , such that it changes in accordance with the input which is nothing but column name.
for ex: If i choose EMPNO as the parameter then my column heading should become Employee Number and so on.......
your comments are welcomed
regards
sandeep

you can use a formula column of datatype character and of any width needed instead of a boilerplate text for the heading name.
In the formula column you can write code like below
IF :P_COLUMN_NAME = EMPNO THEN
return('Employee Number');
ELSIF :P_COLUMN_NAME = SAL THEN
return('Salary');
END IF;
where P_COLUMN_NAME the name of the column selected dynamically(i.e. the parameter).

Maintenance order header long text copy into PR header text

Dear all,
Can anyone please let me know how I can copy the Maintenance order header long text into the PR header text of service or component PR.
Thanks in advance.
Regards,
Vineet
Edited by: vineet sharma on Oct 19, 2011 1:23 AM

Hi
Please check this link Re: Copy text from PM order to Purchase Requisition
regards
pushpa

Changing the text and the order of columns in ALV for WebDynpro

Hello experts, im using ALV in WebDynpro, and i have this code:
lr_column = lo_value->if_salv_wd_column_settings~get_column( 'ZNC_MONTO_LIQ' ).
lr_column_header = lr_column->get_header( )
lr_column_header->set_text( 'IMPORTE' ).
but this code, doesn't change the title of the column.
the same happens when i put the visibility in "none" or when i change the position of the column
Anyone can tell why this is happening?
Thanks!

You can't set the text of the generated header directly. You have to first delete the standard header and create a new one. You can then override the header text.
l_column = l_table->if_salv_wd_column_settings~get_column( 'CREATED_AT' ).
l_column->delete_header( ).
l_header = l_column->create_header( ).
l_header->set_text( `Created At` ).

How do I move the text in the spry sub-menu down?

Hello I am currently developing a website in Dreamweaver CS6 and I have come to a problem I can't seem to solve. I have created a fairly straight forward spry menu bar and used css to edit it, however as you can see in the image below, the sub-heading below the 'My Work' is really close to the 'My Work' heading and it doesn't look too good. I was wondering if there is a way I can move the 'Graphic Design' text in the sub-heading down a bit using css so everything looks more neat and spread out.
Thanks

Here's the code, I think this is the one you asked for?
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - version 0.6 - Spry Pre-Release 1.6.1 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
          margin: 0;
          padding: 0;
          list-style-type: none;
          font-size: 100%;
          cursor: default;
          width: auto;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
          z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
          margin: 0;
          padding: 0;
          list-style-type: none;
          font-size: 9pt;
          position: relative;
          text-align: center;
          cursor: pointer;
          width: 170px;
          float: left;
          font-family: Helvetica;
          font-weight: bold;
          /* [disabled]background-image: url(../IMG/spry%20bg.jpg); */
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
          margin: 0;
          padding: 0;
          list-style-type: none;
          font-size: 100%;
          z-index: 1020;
          cursor: default;
          width: 172px;
          position: absolute;
          left: -1000em;
          top: 23px;
          height: 88px;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
          left: -1px;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
          width: 170px;
          height: 30px;
          background-color: #1F1F1F;
          text-align: centre;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
          position: absolute;
          margin: -5% 0 0 95%;
          padding-top: 10px;
          margin-top: 5px;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
          left: auto;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
          /* [disabled]border: 1px solid #CCC; */
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
          display: block;
          cursor: pointer;
          padding: 0.2em 0.75em;
          color: #CCCCCC;
          text-decoration: none;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
          /* [disabled]background-color: #333333; */
          color: #FFFFFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
          /* [disabled]background-color: #333333; */
          color: #FFFFFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
          background-image: url(SpryMenuBarDown.gif);
          background-repeat: no-repeat;
          background-position: 78% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
          background-image: url(SpryMenuBarRight.gif);
          background-repeat: no-repeat;
          background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
          background-image: url(SpryMenuBarDownHover.gif);
          background-repeat: no-repeat;
          background-position: 78% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
          background-image: url(SpryMenuBarRightHover.gif);
          background-repeat: no-repeat;
          background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
          position: absolute;
          z-index: 1010;
          filter:alpha(opacity:0.1);
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
          ul.MenuBarHorizontal li.MenuBarItemIE
                    display: inline;
                    f\loat: left;
                    background: #FFF;

How to make text in the cell center(upper and down) of the table

As attached, the text in the column head of the table is near the upper edge.
Is it possible to make the 'abcd' in the center of the cell, thanks.
Attachments:
ss.jpg ‏6 KB

select the table contents and do the above

Erroneous Shipping Header Text in the Sales Order

Hi ,
We are facing one problem.Can you please help us..
We seemed to have a recurring issue in SAP Production wherein an erroneous shipping text and supply location header text
suddenly appears on the sales order header text.   As of this stage, our interim solution is to manually clear the erroneous text via invoking
the SAVE_TEXT command directly in Production to clear out the text.   The problem with this approach is that we are "reactive"
to the event meaning we only get to know of the issue after the National Order Centre reports the issue and by the time it reach
IT it already affected quite a few sales and stock transport orders.
I
a) an investigation to be conducted as to identify the root cause of this issue
b) permanent solution to be put in place to rectify the issue
here's the text ID that got affected
Text ID = Z022 (Shipping Text)
Text ID = Z029 (Supply Location)
Language = EN
Text Name = XXXXXXXXXX
Text Object = VBBK
a list of programs that calls SAVE_TEXT and updates
the above-mentioned text ID. We have gone through the SD user-exit MV45AFZZ.
The sample you see below is an STO. As you know the STO is created inside the sales user-exit and uses the
shipping instruction default from the originating sales order to pass on the text to the STO shipping text.
We are unable to re-create this issue so this sorts of adds a layer of complexity.
I found SAPLSTXD memory id..It is importing from this id..But there is no export in the program..
Can you please help us where the text is exporting ..We need to find out the root cause of this issue and solution..
Thanks in advance.
Satish kumar.

I found SAPLSTXD memory id..It is importing from this id..But there is no export in the program..
Chances are it is set and exported at some point, then abandoned after processing for that document...it needs to be cleared probably, since your user is remaining in the same user context and therefore when another import is executed, the text stored there is brought in, even though not for that order/document....believe you'll find this is a programming error, need to export space or clear the ID after it is used...
Check the other MV45AFZ* objects also...MV45AFZZ is not the only SD user exit...look at the inlcudes (named like mv45afz* ) in SE80 for program SAPMV45A. I can't see SD (don't run at my employer), but you might also check copy requirements in transaction VOFM entries? Some of the SD wizards can advise on that part.
Try ABAP Scan program RSRSCAN1, probably as background job, if you don't find in MV45AFZ* members. Sorry, that's the old program (but it might find for you). Current version is program RPR_ABAP_SOURCE_SCAN.
Edited by: BreakPoint on Sep 22, 2010 4:16 PM

Erroneous text in the incoming header

Similar Messages

Maybe you are looking for