Error -1 at private_5640_bitstream Downloader -- FPGA Programming Error

Hi,
I ran the sample "NI5640R Analog Input and Output" example that is provided along with the board and I got an error saying
"Error -1 occurred at private_5640_bitstream Downloader.vi:2
Possible reason(s):
FPGA Programming Error
(INIT_B pulled low
during configuration)
Possible reason(s):
FPGA Programming Error(INIT_B pulled low during configuration)"
Please suggest me what should I do to get the DAQ board working again.
Thank you.
Rohit Aggarwal.
PhD student.
Department of Electrical and Computer Engineering.
The Ohio State University.

Is this a shared computer? Could somebody else have installed something that broke software compatibility?
One way we can check is by looking for an installation log. Go to C:\Users\All Users\National Instruments\Installation Logs\InstallationSummaryLog.xml. If the log exists (which it may not), open it up and scroll to the bottom. Look for install events that happened since it was last known to work.
Also something we can do is try repairing your install. Go to Add/Remove Programs>>National Instruments Software. Find the NI-5640R 1.1 driver, select it, and click repair. I believe that it should repair your NI-RIO install as well.
If you want to send me your InstallationSummaryLog.xml, I would be happy to take a look at it. You can attach it to a private message if you like. Also, if you know the last time that the board was working, it might narrow things down for me.
-Dan

Similar Messages

Getting a "Download Error" and can't download any programs or see my app list.

I am using a Macbook Pro with OSX 10.9.1 and I have been paying for and using CC for several months. This week, I had a persistent bug with Ps so I uninstalled it, with the intent of reinstalling to see if that fixed the error. However today when I clicked the CC icon and went to Apps, none of my programs show up. Instead, it just says "Download Error. Please retry again or contact customer support." There was a button to "reload applications" but nothing happens when clicked. I just want to download the programs I am paying for!
I have an internet connection (obviously, since I'm posting here) and have looked through the forums and support articles with no luck. I tried uninstalling CC, using the CC cleaning tool, and reinstalling, but nothing changed except that now I can't use any of my CC programs since they were all uninstalled with the clean. I have restarted my computer and checked my connection. I also waited on hold for live support for a while, but I'm at work and I honestly don't have the time to sit and stare at my screen, waiting, for an indeterminate amount of time.
Can anyone help me with this? I can't do my job without the CC programs so this is extremely frustrating.

I think I have fixed this. Even more googling found me a community support thread where following the advice in #5 and #9 seem to have brought my Apps tab back to life. Specifically, I deleted the folder mentioned and restarted the program. This took two tries to take effect.
Now I am redownloading Ps and will post back if I run into another roadblock. Thanks for all yr help Adobe, that $20/mo really buys excellent support and all the articles were super helpful with my issue. /Sarcasm

Trying to download the program, error code 201 pops up

I am trying to download the free trial of Photoshop, but the error code: 201 keeps popping up with no further detail. What does this error code mean?

I assume you are using the Creative Cloud desktop to download Ps CC? Try signing out, restarting your computer, and signing back in.
Benjamin

I have error when i have downloaded firefox the error is 0x77372245

when I have downloaded firefox i have this error message coming in 0x77372245 i have deleted the software uploaded again but still the same. please help.

Hello, which firefox version have you downloaded?
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Receiving error message - "couldn't complete request program error" while trying to add layer style

Any suggestions? CS6 update, use Cloud service so stays up to date. This has happened before, closed program and restarted all was good BUT not now & especially now - it has stopped me dead in tracks on work ! HELP please

You have not provided any system information or other details, so nobody can even guess what is going on.
mylenium

Im using firefox 4.0.1 and Idm 6.05, I get an error while i click download button.

Im using firefox 4.0.1 and Idm 6.05, I get an error while i click download button.
ERROR Displyed is : "cannot connect to dl120.duckload.com:80" and "permission denied. check your Firewall settings and ensure IDM has permits to access internet"
But i have disabled Windows firewall and i dont have Antivirus.. Plz help me...
For more plz see tis screen shot : [http://img845.imageshack.us/img845/5234/idmerr1.png link text]

See if the "stable" version released on 30 June is compatible with Firefox 5.0. That page doesn't mention which versions of Firefox it is compatible with, a serious oversight, IMO. <br />
https://www.torproject.org/torbutton/
Plus, it looks like that developer hasn't updated his AMO page in over a year, which makes it impossible for users of that add-on to get automatic updates as each new version of Firefox is released. <br />
https://addons.mozilla.org/en-US/firefox/addon/torbutton/

Critical program error in BEx designer when open the workbook

problem is coming related to Workbook.when i m opening the workbook then busiess explorer giving the error messgae i.e * A critical program error has occured. The program will now terminare.please refer to the trace for further information * kindly please provide the best solution for this problems.

hello , I got the same error while opening a workbook, and I found that this is happening coz I made some changes in Query structure contained into workbook.
So when you are opening and inserting the input variable do following things:
1.Open the workbook and insert the variable, but do not click "OK" just click on "CANCEL",
and your Workbook will display without data .
2.Now go to "Design Mode" reinsert the query by refreshing dataprovider(data analysis grid), and do the changes if you required and exit design mode,
3. Save workbook and now insert the variable values and check the work book will work without any error.
Thanks Hope it will help, coz it helped me.

FXTrans Script runs on error: UJK_EXECUTION_EXCEPTION:Run program error

Dear Experts,
I found a couple of messages related to this topic but unfortunately no solution that fits for me. I have the following problem. In 7.0 we implemented a very simple prototype currency translation and it worked just fine. We migrated the appsets etc. to 7.5 SP4 and I was gonna run the currency translation but the script gives me the following error in the package as well as in the script logic tester:
RUN CURRENCY CONVERSION
EXCEPTION OCCURRED WHEN RUNNING PROGRAMS:
Error found in BPC
UJK_EXECUTION_EXCEPTION:Run program error, Message Number: ""
For that reason, the package of course runs on an error.
This is my FXTRANS-Script:
*RUN_PROGRAM CURR_CONVERSION
CATEGORY = %CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
OTHER = [ENTITY=%ENTITY_SET%]
RATEENTITY = GLOBAL
*ENDRUN_PROGRAM
This is my Test-Script for the Checker:
*RUN_PROGRAM CURR_CONVERSION
CATEGORY = V301
CURRENCY = EUR
TID_RA = 2011.JAN
OTHER = [ENTITY=S21001]
RATEENTITY = GLOBAL
*ENDRUN_PROGRAM
I am very sure that I maintained all needed dimensions and properties. I just dont understand why the system gives me such a weird error message. I'm desperate.
Thanks in advance,
Cora

Dear CoraBo
I hope you 've configured " Currency Conversion Business Rules" in main Financial App, as required.
In the meanwhile, as I could not find much details of error LOG report in your message, I suggest you to have some insight of possibility of error ("UJK_EXECUTION_EXEPTION:Run Program Error") in the following thread for your reference:
Currency Conversion
Hope this will help you, for some extent.
Regards
ukraghu

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.

Unable to download iTunes on my second windows computer (64 bit). I got it fine on my first one. After downloading the program and installing it, I keep getting an error message:Apple Mobile Device Failed to Start. This happens wven when my IPhone 5c is t

I am unable to download iTunes on my second Windows 8 computer (64 bit). I got it fine on my first one and have used it quite a bit. After downloading the program and installing it on the second computer, I keep getting this error message: "Apple Mobile Device Failed to Start." This happens when when my IPhone 5c is connected via Wi-Fi and I have clicked on "Trust This Computer." (I have tried to install several times-- It gets hung up when it reaches"Starting Services.")

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analy

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."

Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium

Downloaded adobe photoshop elements 10 editor from Mac app store onto my mac book pro, set i photo preferences to APE 10 Editor, but can not open any files from my library, error saying " program error". What else do I need to do?

Have downloaded Adobe Photoshop Elements 10 Editor from the Mac App Store onto my Mac Book Pro, set i photo preferences to Adobe PSE 10 editor, but when I try to open a file from my photo library, the following message appears: "could not complete your request because of a program error". What can I do to resolve this issue?

Hi..
Post your topic in the iPhoto community here. That way you can get feedback from iPhoto users.
This community is primairly for issues with the App Store.

I own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error. i am using copy and paste to prevent miss typing the code.

i own acrobat 9 pro and had to re-download the program from a computer issue but when i get the serial code from the adobe website it give me serial code invalid error. i am using copy and paste to prevent miss typing the code.

Hi Lawrence,
Please try the steps mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html
Regards,
Rave

After downloading and installing PS CC2014 i wanted start the application but got a message "Impossible d'initialiser Photoshop en raison d'une erreur du programme", in english sth like unable to initiate PS due to a programe error. I did an uninstall and

After downloading and installing PS CC2014 i wanted start the application but got a message "Impossible d'initialiser Photoshop en raison d'une erreur du programme", in english sth like unable to initiate PS due to a programe error. I did an uninstall and a new download, but the problem's always there

Try this: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

I tried to reload a previously downloaded CS3 program on to my new hard drive and this is the message when I click on the english link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

I tried to reload a previously downloaded CS3 program on to my new hard drive and this is the message when I click on the english link for Mac products: HTTP ERROR: 404 /support/downloads/dlm/main.jsp RequestURI=/support/downloads/dlm/main.jsp

Make sure you have cookies enabled for your browser. Try using a different browser if the problem continues.

Error -1 at private_5640_bitstream Downloader -- FPGA Programming Error

Similar Messages

Maybe you are looking for