Error-19 while trying to upgrade to v.7.4.1

In Airport Utility, when trying to upgrade to the 7.4.1 firmware (from 7.3.2), I keep getting an Error-19 message: *An error occurred while reading the configuration*. Make sure your Apple wireless device is plugged in and in range of your computer or connected via Ethernet and try again (-19)".
This is despite that it is in range and it is connected and working properly. I have not tried with a direct (wired) Ethernet connection. But after reading the many problems with v.7.4.1, I'm not sure I want to update to this version. Now, everytime I turn on the MBP or switch user accounts, the Airport Utility turns on and I get an an annoying message that there is a problem with my base station requiring the update. The green status light on the on-screen advisory has now turned to amber. Working off an Airport Extreme/ 1Tb TC.
Any clues to returning to a green status light display in my Airport Utility dialogue box?

I had the same problem, ended up just resetting the cable modem and Airport by unplugging both and letting them boot up again. The green light is back and it is still running with the old firmware.

Similar Messages

Got an error message while trying to upgrade to ISO4! Help!!!

I have upgraded my 3G phone with ISO4 software upgrade as requested by the system. The phone activation failed as Apple could not activate at that stage. Now my phone will not cut on, it stays on the Apple screen. I tried to restore the Iphone and it gave me another error message (unknown error 21). Help

I too have the same problem, was upgrading to ISO4 great until it was reinstalling the back up, has completely stopped working, just keeps trying to reboot itself, it appears in itunes but you can not do anything with it not even restore to factory settings! Was upgrading on a new computer as was having difficulties with a laptop and 7 yr old xp desk top, do I dump the iphone or take it to an Apple shop (not that they care!) tried restoring on 3 computers same message!

I get an error message while trying tu upgrade iPhone4

Hi,
I have bought an used iPhone (not new but sill under warranty), and when I try tu upgrade firmware through itunes (from 4.3 to 4.3.3) I get this message "This device is't eligible for the requested build"
What can I do to get this last firmware ?
Thanks

Problem might be on you Mac, you need to edit your hosts file and remove any mention to gs.apple.com.
Editing the hosts file
Editing the hosts file in Mac OS X – Leopard, is a pretty easy task, especially if you are familiar with the terminal.
Step 1 – Open the Terminal.app
Either by start typing Terminal on the Spotlight, or by going into Applications -> Utilities -> Terminal.
Step 2 – Open the hosts file
Open the hosts by typing on the Terminal that you have just opened:
1
$ sudo nano /private/etc/hosts
Type your user password when prompted.
Step 3 – Edit the hosts file
The hosts file contains some comments (lines starting with the # symbol), as well as some default hostname mappings (e.g. 127.0.0.1 – localhost).
You can navigate the file using the arrow keys.
Step 4 – Save the hosts file
When done editing the hosts file, press control-o to save the file.
Press enter on the filename prompt, and control-x to exit the editor.
Step 5 – Flush the DNS cache
On Leopard you can issue a simple Terminal command to flush the DNS cache, and have your host file changes to take immediate effect:
1
$ dscacheutil -flushcache
You can retry your upgrade...

Error (-5000) while trying to upgrade to iOS 5

Can anyone help fix this problem?

Check out the other threads, this seems to be a problem with firewall and/or antivirus software. I disabled my Windows 7 firewall and was able to upgrade just find. Others have had to disable antivirus software (Norton) but I didn't have to go this route.
Hope this helps

What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don't know what that signifies. Help?

What do I do now that Photoshop CC has encountered an error while trying to upgrade. Suggesting retry does nothing. The numbers (49) appear, but I don’t know what that signifies. Help?
It is recommended that I ask for help, which put me here. What I really need is some customer service — not a chat room!

If Windows :
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from C: > Program Files > Adobe Photoshop CC 2014 .
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
It should update.
If Mac:
Quit Creative Cloud desktop application .
Launch Photoshop cc 2014 application from Applications folder:
Once launched , click on Help menu in Photoshop cc 2014 and select Updates option .
Let me know if you face any error .
Error 49 occurs while updating the application , when Creative Cloud app does not have reference / Access to installed CC app, so that it can apply updates for the same .
You can try to update from CC app like Photoshop itself and check.

Get error when trying to upgrade to IOS5 - An error occured while trying to Back up ipad -402653138

Help
I am trying to upgrade to IOS5 and i cant get past the backup step of the upgrade - I keep getting An error occured while trying to Back up ipad (-402653138). I have tried removing my current backup and letting the update do the backup but still get same message.
I also get a warning right when I start the upgrade process that says I have purchased apps that have not been transfered and wants to know if I want to continue??? Not sure why I get this warning - I have ran the transfer purchases option several times and it seems to work. However, if I go under store and look at the purchases for my ipad it dosnt show any??? I would assume it should?
I have tried syncing and backing up, rebooting, all latest versions of itunes, etc.
Any ideas or help would be much appreciated.
Thanks
Erik

I took a leap of faith and finally got the update with no issues. Here's what I did:
First did yet another backup. Next, disabled all anti-virus and anything related (running Norton 360). Next, turned off Home Sharing.
Instead of "Update" I selected "Restore". Followed prompts as though I wanted to restore and update. Selected my latest backup and off it went. First did the wipe, then ios5 update, then restarted and began to sync. Sync took about 2 hours as I have lots of apps, photos and some TV shows I forgot were on there.
In the end, I had the exact same configuration. All apps on their pages as before the update, all folders intact and even all game scores and data from apps. Hurray!
Now just going through the App update process of the many (85) that showed up in App Store icon.
Hope this helps!

TS3694 I am getting "An unknown error has occurred (3014)" on my iPad2 while trying to upgrade to iOS6. What do I need to do to fix this?

I am getting "An unknown error has occurred (3014)" on my iPad2 while trying to upgrade to iOS6. What do I need to do to fix this?

Hi apiccolo5,
Thanks for visiting Apple Support Communities.
See these articles for steps that can help you resolve the issue you're seeing:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
Best,
Jeremy

"An error occurred while trying to save your photo library..."

Installed iPhoto6.
Started app. It said it would take a few seconds or minutes to upgrade.
About 6 hours later after churning on thumbnails it is now claiming this error over and over with some time that goes by in between:
"An error occurred while trying to save your photo library."
"Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library folder."
It says I have 22,759 photos in Library. The Library was a subset of my images, named "iPhoto Library 2005" and it was intentionally kept below the 25,000 limit of iPhoto5.
Since Steve claims iPhoto6 can easily handle 250,000 photos, I clicked on the upgrade button with confidence. This now appears to be a mistake. Last night I was working on an iDVD for the local school and the majority of that work has simply vanished. There were 320 photos. I spent hours adding keywords, ranking, adjusting temperature, focus, exposure, etc.
Of the 320, only 16 photos survived. They are 16 in a row from the middle of the roll near the end but not at the end. The roll name was lost. The name is now just "Roll 226" and none of the photos have keywords. I know at least one of the 16 should have the keyword "DUPE" and the ranking 2 STARS since it precedes a double that I ranked 2 during a slideshow, sorted by ranking, and dragged to the DUPE keyword. All 16 should have the ACROCK keyword which I initially assigned to all photos.
Again, 304 of 320 have vanished and the 16 that remain have no keywords or rankings.
I watched the slide show in iPhoto5 three times with different music candidates so I know the keywording and rankings evaporated in iPhoto6. I also clicked ACROCK and option clicked DUPE and POOR so that all of the music program photos except dupes and poor images would vanish. I only deleted one photo so there were not a lot of changes to the library in terms of photos in it. I cannot think of any reason why the 16 chosen survived. Only two were placed in a DVD dropzone and they are scattered amongst the 16 survivors.
Also, the ACROCK and DUPE keywords are also gone while the POOR keyword added in August is in the keyword table just fine.
I exported these 320 photos last night to iDVD and tried almost all of the different themes and I dragged about 10 different photos to the dropzones, hit play, hit motion, etc.
It seems very strange that 16 photos from the middle of the pack would survive.
It seems extra odd that iPhoto5 and iDVD treated these as "established" photos, not photos hanging in the wings somewhere ready to vanish in an upgrade.
I gracefully saved and quit iDVD and iPhoto5 and there were no crashes and nothing strange happened while making the DVD. I was hoping today to try out the new themes and maybe find one that is just right for the kids. Instead, about 300 of 320 photos of the kids went bye-bye along with all the work on the photos!
I'm nervous that many more photos are missing but I will need to do a ton of checking to see what else has been deleted by the upgrade.
The user message that iPhoto6 presents is nearly useless and strange. It offers little if anything to go on in terms of a repair procedure. After saying an error has occurred, it says some recent changes could be lost but doesn't expand at all on what they may be or why.
From my experience, recently added photos, keywords, keyword assignments, rankings and maybe more can all be lost. To compound matters, before the upgrade it says that you cannot go back to the prior (working!) library in iPhoto5. Beware!
It finishes by suggesting two vague steps to take. The first is to make sure your disk has "enough" space. How much is "enough"? It doesn't say something like X GB available, Y GB needed. A user would have no clue about how much space to free up. I have over 17 GB and assumed that would be enough. I sure hope it doesn't require double the space of the existing library. I would hope it has a smarter algorithm than that since 23,000 photos at about 3 MB each maps to about 70 GB. That's a lot of "temporary" space to require to perform an upgrade. Since the upgrade/error message provide no details (unlike package installers which supposedly tell you how much space you need), users like me would have no clue if 70 GB is plenty or not enough.
I found 24 GB secretly used by iPhoto 5 for an iPod Photo Cache and a tech bulletin saying this just grows and grows without control and it can be deleted SO I wouldn't put huge hidden disk usage past iPhoto6.
The last none-to-helpful suggestion is that a user make sure that iPhoto is able to access the iPhoto Library folder. Huh?!??!?
Wouldn't this be a great thing to confirm via software before setting about on 6+ hours of work, especially if there is an error message hard-coded in the software confirming that Apple knows the result may be losing valuable customer photos and hours of work on enhancing, keywording, creating DVDs, etc.?
Of course. This appears negligent. To know that customer file loss will likely result but not checking these things out in advance before taking that risk seems like putting the cart before the horse at customers' expense & pain and certain loss of irreplaceable family photos (for the, say, 80%+ of iPhoto users that "plan" to get a backup routine established?).
I got burned in the iPhoto5 upgrade as well, losing photos, so I was sure to have a backup so it wouldn't happen again. Most I fear won't be so fortunate so be advised of the risk and work with copies of your photos only.
Also, why would iPhoto5 have all the permissions it needs to store, edit, tag and otherwise work with 320 photos added last night? Why would version 5 have plenty of permissions to use the folders and the photos in them. Why would iPhoto 6 suddenly lose those permissions or not have enough? This hardly makes any sense. The only way the permissions were set, the iPhoto libraries got created and the albums got created was by dragging a folder of images onto the albums pane in iPhoto5. So, iPhoto5 set all the permissions, everything is under one user account and there should be no surprise permissions for iPhoto6 to deal with.
It seems unbelievable that iPhoto 6 couldn't do what iPhoto 5 was doing. I never changed permissions and never touched files in the iPhoto 5 structure.
I can only guess that recently added keywords, recently added photos and recently added rankings and keyword taggings linger in some at-risk staging area that a version 6 upgrade doesn't know how to deal with. This seems like a lame way to code this app so I don't consider this a good guess but what else could it be?
Anyone else have a better hunch at a root cause?
Anyone else have an idea of a cure?
Anyone else run into this?
It sure doesn't look like there was a test case for having near 25,000 photos (an iPhoto 5 documented requirement), working with the latest roll and then doing a version 6 upgrade because it failed miserably--user data loss--without any special effort to find defects. In a former life I tested software and released software was much more difficult to break than this.
I would appreciate any other user experiences/solutions related to this problem. I am reluctant to import another 22,000 photos from iPhoto Library 2004 only to find more photos go poof without any rhyme or reason.
Thanks in advance for your help and I hope this alerts others to a potential for valuable photo loss (i.e., back up before you upgrade, verify iPhoto Library permissions--whatever that means--and have scads of disk space available assuming there's any truth to the error message!).
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)

I'll check if I have copies of copies of copies. This could take a while due to the number of files.
I picked up a brand new 300 GB Western Digital hard drive thinking 20GB or so was not enough for temp files for upgrading and/or importing.
I formatted it as a mac os extended, journaled drive, not case sensitive, one full-size partition. I started iPhoto6 with the option key. I had a CF in my other WD 300 GB (with media reader). iPhoto6 asked about the photos on the card. I told it not to download those (again). Because I was holding the option key down, iPhoto6 asked if I wanted to select a different library or create one. I created one on the brand new, 100% empty 300 GB drive. I'm not sure if/where iPhoto6 creates temporary/cache files (like iPhoto iPod Cache folder) as it sets up a new library. I was hoping the empty 300 GB drive would give it ample room to load an existing iPhoto5 library.
When I dragged an old iPhoto5 Library onto the new iPhoto6 Library Album pane. I saw the "Importing..." start and it went on and on and on and... I let it run for HOURS and HOURS. When I checked around midnight, it had crashed. When I started it again, it said it had run across some huge number of stray photos.
I have no idea why iPhoto6 would have trouble importing an iPhoto5 library that was below the 25,000 photo mark for 5. This is especially bizarre since iPhoto6 claims it supports 250,000 photos!
I'll be trying to figure out if these stray photos got imported as dupes, if they lost iPhoto5 keywords, etc. I fear something different but equally bad happened since the number of photos it came up with was like 79,000--again many stray photos that didn't make it into the first import for no known reason. Since libraries in iPhoto5 were around 25,000 or less, I'm not sure what's happening.
Maybe there's a cache or temp file still created on Macintosh HD and not on the empty new 300GB drive and a bug exists for imports when space on Mac HD is "low" (i.e., under 3.5 GB). Maybe it's seeing thumbs as files it should import? Maybe it's seeing Orig and Modified images as worthy of reimporting?
I had told it not to import dupes but who knows if it goes by file name, checksum, byte-for-byte comparison, etc.
I'm not sure if I can even pull up iPhoto5 and 6 at the same time now to scroll through the libraries to see if dupes, thumbs, original/modifies/etc. are showing up to boost the count from under 25K to 79K!
Ideas? At least I know I'm not the only G5 dual user with this problem!
--Sam
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)
G5 Dual 2.7 GHz 2 GB DDR SDRAM Mac OS X (10.4.4)

Error 4850 while burning, after upgrading to 10.1.2.17

Hi guys I'm suddenly encountering error 4850 while trying to burn either an audio or mp3 CD. Burning a data cd seems to work fine. This just started happening I'm assuming because I upgraded to itunes 10.1.2.17, I've burned hundreds of CDs with no problem before the upgrade (altho I've had this problem once before after an upgrade about a year ago)
Any help would be greatly appreciated
Matt
Microsoft Windows 7 x64 Home Premium Edition (Build 7600)
HP-Pavilion AY747AA-ABA p6310y
iTunes 10.1.2.17
QuickTime 7.6.9
FairPlay 1.10.24
Apple Application Support 1.4.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.3.1.3
Apple Mobile Device Driver 1.52.0.0
Bonjour 2.0.3.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number F5BADCC543E06108
Current user is not an administrator.
The current local date and time is 2011-02-13 21:18:38.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce 9100
** External Plug-ins Information **
No external plug-ins installed.
iPodService 10.1.2.17 (x64) is currently running.
iTunesHelper 10.1.2.17 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: hp DVD-RAM GH40L, Rev RB0E
Audio CD in drive.
Found 16 songs on CD, playing time 60:07 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 03:56:37
Track 3, start time 07:23:20
Track 4, start time 10:57:07
Track 5, start time 14:31:25
Track 6, start time 19:12:65
Track 7, start time 22:06:67
Track 8, start time 25:46:05
Track 9, start time 29:34:67
Track 10, start time 33:38:65
Track 11, start time 37:11:05
Track 12, start time 40:46:20
Track 13, start time 44:25:10
Track 14, start time 48:04:62
Track 15, start time 52:17:05
Track 16, start time 56:39:35
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 24 32 40.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 4850(0x000012f2). It happened on drive E: hp DVD-RAM GH40L on CDR media at speed 8X.

I am having the same error message displayed for my diagnostics run. Cannot burn any CD's. Is it even possible to burn CD's w/ iTunes?

Permissions issue: An error occurred while trying to save your photo librar

I recently upgraded from a Mac mini running OS X 10.4.10 (iPhoto 08) to an iMac Core2Duo (2.4ghz) running Leopard (and also iPhoto 08).
My iPhoto library resided on an external Firewire drive when running on the Mac mini, but now that the iMac has such a large hard disk (750gb), I wanted to move my library there. I copied the library over to the Pictures folder in my user folder on the iMac and started up iPhoto, and everything seemed fine.
When iPhoto is running for any length of time, I get the following error:
*An error occurred while trying to save your photo library.*
*Some recent changes may be lost. Make sure your hard disk has enough space and that iPhoto is able to access the iPhoto Library.*
(I have over 300gb available on the disk and my library folder is approximately 40gb.)
I've repaired the permissions on the library using iPhoto's built-in mechanism (command-option while booting iPhoto) and Disk Utility. Additionally, I've used BatchMod to give my user and group full read/write/delete permissions (as posted elsewhere in the forums), but I still get the error.
Searching the forums yields other users w/ the same issues. What's the scoop? TIA!

Sean:
I just had the very same problem when I was messing with permissions and reset my unknown group to staff. I lost all write permissions in my nome folder. Here's how you can reset it for your pictures folder:
In the Terminal type in "sudo chmod -R -N " (there's a space after the N) and drag the Pictures folder into the Terminal window. Then hit the enter key. It should chug along for a couple of seconds and return a new prompt. Give iPhoto another try after that.
I had to do that for my entire home folder and it fixed the problem.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

IPhone 4S stuck in recovery mode while trying to upgrade to iOS 7.0.4

I ran into the issues with my iPhone 4S while trying to upgrade it it iOS 7.0.4 OTA and I have tried everything I can to recover it but no luck. I have tried different USB ports, different PCs altogether with av tuned off, and finally a MAC Pro this morning. I am stuck and miserable. I did everything that a number of forums have mentioned in terms of switching off anti-virus, clearing off host files, checking windows and mac firewall settings, setting the phone to DFU mode and trying over - you name it.
The error I run into most half way through the upgrade is "Unknown Error (29)". According to Apple (http://support.apple.com/kb/TS3694), it has to do with anti-virus but last night I spent 2 hours building an image with no av or firewall running and tried and still ran into the error. Even tried "Fix it" from Microsoft to clear off the host file configurations as prescribed.
Any help is welcome. Much needed.

Hi, sorry for my late reply.
FIXED!!!! For me anyway, and I hope for you!
So I tried to update to ios 7 and after downloading the software itunes tried to update my iPad 3. I recieved the error 3004 and was stuck in the "Connect to iTunes" screen and
could not get out of it. Completely annoyed!
But then I remembered something from when I used to fiddle with iphones. I opened a program I had called TinyUmbrella, which can be used to force boot out of recovery mode (the
"connect to itunes" screen).
My ipad was still connected to itunes and in recovery mode. I opened TinyUmbrella, selected my ipad (which was just shown by the serial number), then clicked "Exit Recovery" and
BAM!!! It immediately kicked my out of the recovery screen and started my ipad back up to my home screen.
Now, my ipad was still on 6.1.3 since the update to ios 7 had failed. But I didn't care, my ipad was fully functional again just like I left it before. Thank God for
TinyUmbrella! Here's the CNET link for TinyUmbrella if you need it:
http://download.cnet.com/TinyUmbrella/3000-18545_4-75766724.html

Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE.

Received the following error message while trying to install icloud 3.1 and my iTunes stops when I try to access the iTune store, Microsoft.vc80.CRT,type="win32",ver="8.0.50727.6195",processorArchitecture="amd 64".HRESULT:0x800703EE. Recently upgraded to windows 8.1 then everything just wouldn't work properly

Could you solve this problem? I have similr problem. I can't upgrade Itune it generat the error below. I already unistall de all version but the error still appear. Could you help?

Content Library Explorer error -error occurred while trying to read the package metadata (can't find package in console)

I have SCCM 2012 SP1 recently upgraded to R2. I'm currently setting this up to migrate my production 2007 site. However, I'm trying to use Content Library Explorer on my DP's. I have 3 dps. DP2 connects fine but when i try and connect to DP1 +3 i get
the following error: An error occurred while trying to read the package metadata. The package
PackageID is invalid and must be redistributed from the Configuration Manger console.
Now i can't find any trace of this at all in the console. In the SMSPackagesHist table i can see the package ID and the deleted time was 29-07-2013. This most likely was me trying to create software updates back last year when i initially setup the site.
The package is not listed as content on any of the 3 DPs and i can't find any trace of it at all in the console.
I'm not very familiar with 2012, so not sure what I've done.
Any help or advice appreciated.
Thanks
Jane

Hi Torsten,
thanks for this. I did a search of the WMI key and found this document: http://blogs.technet.com/b/configmgrteam/archive/2012/05/07/troubleshooting-content-mismatch-warnings-on-a-distribution-point-in-system-center-2012-configuration-manager.aspx (does
this mean it is supported?)
however, on those 2 DP's in that class, the suspect package ID is not listed!???
Any more ideas?
Many thanks
Jane

Networked Drive: An error occurred while trying to save your photo library

I just upgraded to iLife '08. After opening iPhoto '08 I began editing Events. After some merging and adding titles I got this error:
+"An error occurred while trying to save your photo library"+
My iPhoto Library is on a networked drive connected to another Mac. Both Macs are on the same switch and there appears to be no issues copying and deleting files and folders outside of iPhoto. Even inside iPhoto, this error is inconsistent, it happens on some changes and not others. I've had this setup for about three years with no issues in previous versions of iPhoto.

There's a strong chance that the problem is the format of the server. Event though the Mac can read and write to FAT formatted drives, there are file name length issues that can really mess up a library or other files.
If you really want to have an error free setup use a server that's formatted for Mac OS X (journaled).
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.

Hi Everyone,
I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load. The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
fine the rest of the day, oddly enough.
A few things about my form:
1). It is web enabled
2). The form submits to a form library on the SP server
3). I use the UserProfileService data connection in the form to auto-populate a few fields
4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
5). The form has been working fine until a few days ago
I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped. Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
have the service account information.
Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
Schema file was already loaded: BuiltInActiveXControls.xsd
FormServer Partial Trust - Proxy operation invoked in the SHIM process.
FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.

Hi B.,
You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
Hope this helps.
Daniel Christian (MCTS)

Error-19 while trying to upgrade to v.7.4.1

Similar Messages

Maybe you are looking for