Error 2186: The service is not responding to the control function

Every time I start the Messaging Server I get an error message. The server
is running and no event log errors are reported. I see:

Could not start the <%hostname%> on <%computername%>.
Error 2186: The service is not responding to the control function.

This occurs because the system does not have enough remaining memory to
create a new desktop heap for the service being started.

The limit can be raised, but doing so requires changing registry entries to
allow more but smaller desktop heaps for Windows NT services.
The best solution is to limit the application connector instances to seven
or less.

For instance, you may make a change from 0 (zero) to 1 (one):

HKEY_LOCAL_MACHINE
SYSTEM
ControlSet001
Control
Session Manage
HeapDeCommitTotalFreeThreshold

Or press Ctrl-F to find "heap".

Nvd,
I'm sorry to hear about the problems that you are running into with your DAQCard. I can understand your frustration with the errors that you are seeing. You mention that you have tried to do some troubleshooting, I was wondering if you have tried all the troubleshooting techniques listed in this KnowledgeBase:
http://digital.ni.com/public.nsf/websearch/DCFCDB240788F8D486256D6A00834D80?OpenDocument
If you have tried all of those things, I would suggest one additional thing to try. I would suggest updating your NI-DAQ drivers to version 7.0. These drivers are the newest versions of our Data Acquisition Drivers, and can be downloaded from our website here:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C128D?OpenDocument&
node=132060_US
If you have tried all of the above troubleshooting options, please post a detailed description of what you have tried. This may help to clarify what is going wrong.
Jed R.
Applications Engineer
National Instruments

Similar Messages

Error 1053: The service did not respond to the start or control ...

Dear SapService,
I've installed a BI7.0 (ABAP only) instance on cluster with :
windows 2003 x64 SP2
SQL server 2005 x64 SP2
WAS 7.00 kernel 80
*the service runs with domain user.
I've upgraded to kernel 114 (latest). After the upgrade the ASCS service doesn't start. It throws error:
"Error 1053: The service did not respond to the start or control
request in a timely fashion"
To solve this problem I've tried:
-go back to kernel 80 but I still get the same error.
-start the service manually on the second node. Still same error.
-restart the two servers and try again to start the service on the
nodes.
Any ideas ?
Please advice,
Dimitry Haritonov

Hi,
Check SAP Note 82751 - Problems with SAP Services & SAP Service Manager
for some initial investigation.
Regards,
Siddhesh

ID 53 Details: The service did not respond to the start or control request in a timely fashion (0x8007041D))

One of my clients has his dpm server turned off for a long time. Now when that server is back online I cannot re-sync backup. First was database in suspect mode and I was not able to acess dpm console. Now when I fix that I cant re-sync job. I even tried
to delete on PG and recreate it but without success. Agent showing OK and it can comunicate with server. I have even tried to uninstall agent and re-install it but without luck.
ID 53 Details: The service did not respond to the start or control request in a timely fashion (0x8007041D))
That is the error what I get on all protection groups. Is there any one who can help with this?
And last thing is that DPM is crushing on recovery tab

Hi
Do you still need assistance with this?

PCI DIO 32HS (6533) Suddenly giving "The device is not responding to the first IRQ level" error, and no longer functioning.

Greetings NI folks,
I'm an oceanographer, and have an sidescan sonar data aquasition computer running Windows XP SP2, and NiDAQ 7.0 (Legacy). For several years, this machine has worked flawlessly, but today, I booted it up to test the system for an upcoming job, and I got some strange errors in our sonar program. I tranced the problem to our NI-6533 PCI-DIO-32HS card. I launched NI Automation Explorer to test that the card was responsive, and when I click the "test panel", I get an error: "The device is not responding to the first IRQ level." Continue (yes/no). If I click yes, I can test the digital i/o's, but nothing happens, and all the tests fail (nonresponsive). I tried moving the card to another PCI slot, tried forcing it to have a specific IRQ that was unused by anything else, and finally tried moving it to another computer that had never been used with the DIO card. I'm still getting the error, and the card is nonresponsive. I'm at the limit of my abilities, and would like to know if there's anything else I can do, or should we send the card back to NI for repair/diagnosis.
Thanks.

Duplicate Post
Best Regards
Hani R.
Applications Engineer
National Instruments

The device PCI 6036E: Analog Input error:"the device is not responding to the base address",Output :No signal

I am using PCI 6036E DAQ card, DAQ 6.9.2. , I have not connected to any external device.
When I tested card(in Test Panel of MAX2.2,DAQ 6.9.2) an error appearing �the device is not responding to the base address� � then I pressed Yes, Then TestPanel window appearing�
In analog Input Tag, there is an error �-10805�. This error also appearing when I run the standard analog input samples (use Delphi 6.0).
I tested analog output functions in TestPanel, Delphi Examples, LabView 6.1. There are not error appearing but there is not output signal (using Oscilloscope to see).
Output, Input digital functions are working correctly.
Next I try to foll
ow all the instruntions as recommended:
-Changing TO another slots PCI
-Reinstall Os WinXP,98SE�
-Use another Computer�
But all of the cases are still not working.(the above error still appeared, no output signal)

Nvd,
I'm sorry to hear about the problems that you are running into with your DAQCard. I can understand your frustration with the errors that you are seeing. You mention that you have tried to do some troubleshooting, I was wondering if you have tried all the troubleshooting techniques listed in this KnowledgeBase:
http://digital.ni.com/public.nsf/websearch/DCFCDB240788F8D486256D6A00834D80?OpenDocument
If you have tried all of those things, I would suggest one additional thing to try. I would suggest updating your NI-DAQ drivers to version 7.0. These drivers are the newest versions of our Data Acquisition Drivers, and can be downloaded from our website here:
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C128D?OpenDocument&
node=132060_US
If you have tried all of the above troubleshooting options, please post a detailed description of what you have tried. This may help to clarify what is going wrong.
Jed R.
Applications Engineer
National Instruments

The device is not responding to the first IRQ level

I am using a DAQCard 700 with a NIDAQ 6.9.3 driver on a windows XP. When I install the card and run the configuration uitillity (MAX) and push the test resources button, the computer hangs and responds to no input (not even ctrl-alt-del). When I push out the PCMCIA card the error message: The device is not responding to the first IRQ level. Anybody that has an answer?

Hi PhilV,
It looks like you had an old AT board in a computer and then the power supply went out and you evidently also changed computers to a device with Windows NT. Now that you're in the new computer there appears to be some sort of IRQ conflict that is preventing the board from working.
In the past when I've seen this issue and all of the proper steps have been taken to troubleshoot it, the problem is often that the board died between the last use and the current use. However, it's not always the case, so here are a few other options.
First make sure that you have Traditional DAQ 7.4.1 (if you have LabVIEW 7.0-8.0 or are doing text-based programming) or Traditional DAQ 6.9.3 (if you are using LabVIEW 5-6.1). Then make sure that you followed the installation procedure outlined here: Product Manual: AT E Series User Manual (Chapter 2)
I did a quick search on ni.com for "device not respond base address" and "irq isa" and found some of the following KnowledgeBases and links that should help you properly troubleshoot the device.
"Not Responding to the Selected Base Address" Error
Troubleshooting Plug and Play Devices for Windows NT 4.0
My PC Doesn't Have Enough Interrupt (IRQ) and DMA Channels to Support the Hardware I Want to Install
There have been a lot of advances in DAQ boards since the old AT days, so with newer devices and computers issues like this are rarely seen. Hopefully though, the device you have is not broken and we will be able to find out what is wrong with it right now.
Regards,
Otis
Training and Certification
Product Support Engineer
National Instruments

Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect request. Some functionality might be disabled

We are receiving following error, while trying to deploy the application on Win Phone emulator. “Windows Phone Emulator is unable to connect to the Windows Phone operating system: The phone did not respond to the connect
request. Some functionality might be disabled.”
I have tried all possible ways that we found on blogs. We are still not able to solve this issue

I have had a lot of issues with the emulator in the past.
Check out this troubleshooting guide. It might help:
https://msdn.microsoft.com/en-us/library/windows/apps/jj681694(v=vs.105).aspx
Also, I find that if I cancel my build/deploy while it is stuck on booting the OS and then wait a short while the phone OS will complete booting, and from that point I can deploy to the emulator. It's a workaround, but it works well for me.
I need to do that on Windows 10 tech preview, which may or may not be simply an incompatibility with the beta OS.
I'm a self-taught noob amateur. Please take this into account when responding to my posts or when taking advice from me.

This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase the timeout value on the Proxy and Timeout page in search administration. You might also wa

HI,
I got the error message in the crawl log as below after performing the Full Crawl
This item could not be crawled because the repository did not respond within the specified timeout period. Try to crawl the repository at a later time, or increase
the timeout value on the Proxy and Timeout page in search administration. You might also want to crawl this repository during off-peak usage times.
To overcome the above error,many forums have suggested me to increase the time out which is under Farm level settings.But if time out gets increased,performance impacts as well.
So please suggest me to overcome this error without increasing the timeout.Thanks in advance
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
I understand that you get the error message when performing a full crawl. I have seen similar cases caused by IE proxy settings. You can try to edit the Internet Options>Connections>LAN settings. Uncheck ‘Automatically detect settings’.
For more information, please refer to this site:
Search error: crawler could not connect to the repository:
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/c230ab36-8d0b-4c25-bf86-33136d17642b/
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The device is not responding to the selected base address

my DAQ card is PC-LPM-16, a few days ago, i configed it properly. and i didn't use it for a few days, but didn't plug out from my computer. today i want to use it, but the MAX test showed that "The device is not responding to the selected base address." i setup my hardware and software again, but still can't resole it, what can i do now?
thank you very much.
liyongqin
2001-10-23

"The error could be happening for a variety of reasons. The first thing I would do is to visit www.ni.com/support/daq and follow the installation procedure, which includes troubleshooting steps on the error you are receiving.
If that doesn't work then try to install the board in another computer with no other devices installed. This will test to make sure the board is not bad. If all else fails call National Instruments and have someone troubleshoot the board and return and repair it if necessary."

Error: Device\Ide\iaStor0, did not respond within the timeout period.

Hello,
In last few months, I began getting the error:
The device, \Device\Ide\iaStor0, did not respond within the timeout period.
My system hangs and slows to a crawl. Error seems to be well-known, and solution is to install the latest version of Intel Matrix Manager, which is 8.6. I've done this, I reinstalled my OS, and I've reinitialized my hard Raid1 array. None of this has helped.
http://www.intel.com/support/chipsets/imsm/sb/cs-025783.htm
Any suggestions?
Thx.
Scott

Quote
Have you tested HDD's with Seagate diagnostic utility?
Going by the link you have provided I assume you are using Vista?
Yes, I am using Vista and I did also use Sea Tools; no issue identified. I'd love to hear more suggestions. Things I've done:
1. Reformat / reinstall. Helped, but problem not eliminated.
2. Ran SeaTools Disk Diagnostic. No issue.
3. Installed Intel Matrix STorage, most recent version 8.6. Should've fix prob, but didn't.
4. Upgraded Bios from 7.5 to 7.9.
Seems like the upgrade to Intel Matrix Storage Manager should've fixed this issue, but it didn't. Any particular drive identified in the error message in the original post?
It is also not clear what changed to have introduced this error. My system has been stable for 2 years and from the errors looks like I've had problems for the last 3 months, but they got notably worse in the last 2 weeks. Reformatting / reinstall helped, but didn't eliminate these issues. Any insight would be appreciated.

HT3964 My Macbook Pro did not respond to the power button, and I ended up resetting the smc. After that, it would start, but the keyboard would not respond, pnly the trackpad. On the screen there is a symbol with ahorizontal white bar and a row of empt

After resetting the SMC the keyboard is inoperative. On the start screen appears a traslucent square with a horizontal bar in white, and a row of empty dots below (the same format as for example the brightness symbol). I cannot turn the Mac off with the power button, only with the trackpad, clicking on the turn off symbol on the screen.
When I try to login with my username, no characters appear as I type.
I can login as a guest, but from there I can do nothing, because the keyboard is still inop and if I wanted to, for example, have the software updated, I need to type an admin login, which is impossible.
Thanks for your help

What happens if you close the lid? Sleep?
In your place I would use sleep state to reset PRAM, as it can resolve your graphical mess.
Your keyboard likely was not powered after SMC/PRAM failure, so you will need to open MBP cover without opening the lid and disconnect battery power cable with insulated tools from logic board, wait for 5-10 minutes, then try to reset PRAM while keeping cover

Error: 1053 Oracleas2ASControl service is not starting

Dear Experts,
As per my earlier question I am finding delay in sending messages. Now I have found an error in my operating system that Oracleoracleas2ASControl services is not starting. When I tried to start i found
Error 1053: The service did not respond to the start or control request in a timely fashion.
In my Architecture, I had 2-nodes,
on 1-node Oracle AS Infrastructure is installed and MT on the other. Infrastructure is working fine but I am facing Error 1053: The service did not respond to the start or control request in a timely fashion...when i trying to start service.
I need ur comments in solving this issue. My architechture is in production.
Your earliest response will be highly appriciated and helpful for me.
Thanks in advance,
Saqib

hello,
what version of database are you running?
Is this problem resolved. I have just looked at your previous post.
rgds
Alan

SSRS Error: The timeout period elapsed prior to completion of the operation or the server is not responding

Hi, I am using SQL Server 2008 R2 Stored Procedure as my dataset and running yearly sales report in SSRS 2008 R2. The weird thing is in SSMS the stored procedure does not take more than 10 seconds to retrieve data and the report also works
fine in BIDS, but from ReportServer if I were to pick an year from 1990 - 2014 they all work fine anything prior to 1990 either shows up fine or throws the below error.
SSRS Error:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'QueryDS'. (rsErrorExecutingCommand)
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. The statement has been terminated.
I checked ReportServerTemDb tables and no table seems to be really large to cause a problem. This report "KeepTogether" property is TRUE.
Thanks in advance.............
Ione

Was able to fix this with the help of
msdn documentation. The query dataset was set to 5 and this was somebody else's report I was fixing and I usually have my report template set to 0 so it took me a while to get there.
Ione

AT-MIO-16XE-50 device is not responding to the selected base address

I'm trying to install my AT-MIO-16XE-50 DAQ board onto my Windows NT desktop computer, but I'm having trouble.
Here's what I've done: I've installed LabView 5.1 and the NIDAQ 7.0 software onto my computer first. Then I've physically installed the DAQ board into my computer. After starting the computer, the plug-and-play system seems to recognize the new hardware and install drivers for it. It then says I need to reboot the computer, so I reboot the computer.
When I then look at my device manager, it lists AT-MIO-16XE-50 twice. Under the properties/resources tab, one of them lists "input/output range", "interrupt request", "direct memory access", and "direct memory access" (i.e., 2 "direct memory access"s). The second one only lists "direct memory access" once and nothing else under the properties/resources tab. Also, the first one says that it is working properly while the second one says that it is not working properly (Code 10). I've played around with chaging the "direct
memory access" numbers and after rebooting the computer have gotten both AT-MIO-16XE-50's in the device manager to say that they're working properly. So, now the DAQ board appears to be installed correctly, because the device manager reports no problems with it. However, there are still 2 of them. My first question is this: should there be only 1 entry in the device manager list, or are there supposed to be the 2 that I see? The entries do appear to be different from each other, but they're for the same device, so that's a little confusing.
When I open my Measurement and Automation explorer, only one AT-MIO-16XE-50 device is listed (so this looks good), and under "properties" all 3 "direct memory access" numbers are listed. So, this all seems good. But, when I click on "test resources" or "test panel", I get an error message saying that "the device is not responding to the selected base address". Considering that this device was plug-and-play, and I did not set the base address manually, I don't understand why I'm getting this error message.
What I've tried is to change the "input/output range" number by using the device manager. I've tried a few different settings (rebooting the computer after each change) and none of the different "input/output range" settings seem to work.
I'd appreciate it if you could give me any help on figuring out how to resolve this "not responding to base address" problem. The info on your web site
appears to suggest flipping dip-switches on the DAQ card, but my card does not have any dip switches because it is plug-and-play. So, right now I'm
clueless! Thanks for reading this, and I hope that you have more insight than I do.

Smaria,
The AT-MIO-16XE-50 shows up twice in the Device Manager because it reserves three DMA channels, and the ISA bus only allows two DMA channels per ISA slot. You mentioned that you were able to get both devices working properly in the Device Manager. Below is a link to a KnowledgeBase that describes the proper procedure to successfully accomplish this. You should verify that this is the procedure you followed:
Exclamation Mark Appears with Error Code 10 on Windows XP/2000/98 After Installing AT-MIO-16E-10
Spencer S.

The timeout period elapsed prior to completion of the operation or the server is not responding

the timeout period elapsed prior to completion of the operation or the server is not responding.
The error shows while executing a (select query) telerik report in MVC.

Hello,
Did you set the CommandTimeOut property of the SQL Command when you call the connection string to SQL Server?
If your select query is complex or the data is larger, please try to specify connectiontimeout property to maximum integer value.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Error 2186: The service is not responding to the control function

Similar Messages

Maybe you are looking for